Blackmagic DeckLink HD Extreme 3D signal drops - CS6

Similar Questions

• Problem with Blackmagic DeckLink HD Extreme 3D and Premiere Pro CS 5.5.1

  Hello

  I'm having a problem with the first and Blackmagic DeckLink HD Extreme 3D. When I create a timeline of Blackmagic of any sort and I import a film and start working on it, everything works as expected and are quite fast. I can see the image in the window of my monitor and the output to the external display of JVC is excellent (SDI). If I create another new project and in there I create a regular first screening chronology (in this case to edit Canon 5 d MKII footage) I can also change without problem (and with even better named Update).

  The problem appears when I try to have a timeline for Blackmagic and a predefined regular creation timeline in the same project. If I create the chronology of Blackmagic first, I can import and edit, but at the moment I have create a first preselection timeline screen goes black for a second (which always happens btw) and then comes back again. So I can edit the first timeline screening perfectly but the chronology of Blackmagic image stopped appearing in the monitor window. I can play, I can hear and I can see it in the external monitor of JVC. But on the computer screen the only thing I see are images that paint on it and somehow stuck in there get it looks like some sort of overlay problem. After that if I close first he won´t close properly. I have to force it out. If I first create a first timeline preset that works just fine but when I create a timeline of Blackmagic this work won´t (the first timeline works fine)

  So, my guess would be that first pass to a certain color depth or space when creating a first screening chronology and for some reason any the Blackmagic card won´t adapt or update so I find myself with no picture and the remains of some images that I place on the monitor window area. I can see the scopes and all waveforms but not the video. Also perhaps monitors and display port adapters have something to do. I'll change soon so monitors would be nice to know if it's part of the problem.

  Any idea? Waiting to hear from Blackmagic too.

  My specs:

  MS Windows 7 64 bit SP1

  Card mother TYAN S7025

  Two-processor Intel Xeon X 5650 @ 2.67 GHz

  32.0 GB Triple-Channel DDR3 @ 533 MHz (7-7-7-20)

  Graphics NVIDIA Quadro 5000

  System drive: 125 GB KINGSTON ATA (SATA) Device

  The data disks: Seagate 2X1954GB (SATA)

  Seagate 2x977GB (SATA)

  External Lacie RAID 5 TB (for backups)

  My monitors are 2 Apple Cinema HD 1920 X 1200, connected via 2 ports of graphics cards.

  BTW, this problem appeared before the named Update.

  Thanks in advance.

  Sergio Rozas

  www.usert38.com

  http://blog.usert38.com/

  I had a similar problem with a Matrox card.  The solution was to turn on the composition of the bureau.  It is under properties - TAB, show - system on the 4th in the advanced settings list.  Some programs (for example AVID) insist on this being extinguished, but with CS5.5 I needed active.  I have not tested this with dark magic devices.  It don't has not caused me a problem with CS5,

• No video signal Blackmagic Decklink and first Pro CC

  Hello

  I need assistance with first Pro CC and BM Decklink.

  I'm not able to get an output signal (external monitor, SDI and Composite) first Pro cc.

  Audio output works on SDI monitor.

  First off, it works very well with after effects CC and Blackmagic Software, so I'm pretty I'm missing something with the CEP settings.

  I use a Blackmagic Decklink HD extreme (9.7.7) and the latest version of CEP.

  Playback options are defined for playback Blackmagic (only), the sequence options are decompressed Blackmagic, 25 fps. video preview is Blackmagic AVI, Codec: uncompressed RGB 10bits.

  If someone could help me with this, would be great.

  Thanks in advance.

  What resolution is the calendar?  I had to happen if, for example, I have a chronology of 25 p 1920 and my monitor does not actually support P. 25

  In After Effects output resolution is defined in the video preview settings, while Premiere Pro outputs regardless of the sequence is defined on.  So, they can be on different parameters, which is why we could work and not the other.

  I use PC not Mac but I found the 9.7.7 drivers weren't very good with some devices and stuck with the 9.7.5.  I have not yet tried 9.8.  You could try their decommissioning.

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• Migration of FCP7 PrPro CS5 - blackmagic decklink reading problem

  Hello

  First of all, I'm sorry for my bad English. Portuguese is my mother tongue.

  I am definitely changing... FCP7 PrPro CS5. FCPX... Well well... nothing new to say.

  I have a MacPro with a BlackMagic Decklink Extreme 3D. (latest drivers for BlackMagic and snow leopard).

  With 2 Apple Cinema HD 1920 x 1200 monitors, JVC professional instructor (SDI) and a Vieira Pana 42 "(HDMI).

  The problem is... I can't read anything on monitor JVC and Pana Viera.

  I chose the BlackMagic option in my preferences of the Player Menu.

  I can read almost anything with FCP7.

  Can someone help me?

  I'm sorry if I don't have my self clear.

  Thank you

  Make sure that you are using a Blackmagic mode, this is the only way to get the video through the editing map. Just start a new sequence and be sure to choose a "Preset" under 'Blackmagic Design'. Presets are exactly that and can be adjusted according to your needs.

• Blackmagic Decklink codecs appearing is not on the sequence settings

  I am one of many failovers of the FCC who is getting used to the use of Premiere Pro.

  I use a Mac Pro with Blackmagic Decklink Extreme. When I start a new project, Blackmagic codecs do not appear in the sequence settings but first saw the release of Blackmagic Audio when I check in the preferences. I downloaded the latest Blackmagic drivers and install them, but I still don't see the codecs for surveillance.

  Anyone in the same boat or has any ideas?

  Thank you

  How Decklink driver version are you using?

  I currently use 8.0 and blackmagic presets is displayed correctly.

  In 'New sequence'--> parameters--> edition mode checks to see if there is an option "Blackmagic uncompressed.

  If this isn't the case, decklink plugins for first are not installed correctly.

  Do not forget that decklink drivers MUST be installed after the installation of CS5.5.

  Hope to be useful.

  Alessandro

• iPhone 5 s signal drops randomly

  I have an iphone 5 and recently I had a few problems of signal, the first thing is that if I do not send an iMessage for 5-10 minutes and then I'll send a message, it takes a lot of time for the message to be sent and then I get a bunch of iMessages as I get earlier, then I use FaceTime a lot and recently there has been very little reliable disconnection after 10-20 minutes , I also tried using the oovoo app an appellant video application and the same thing happned it disconnected after 10-20 minutes (note that after it disconnects I recall and it disconnects again, I can do that for hours) the last thing is my signal drop subsistence and not comin back, I'll be in my house and I notice my signal dropped and he won't come back until I turn the phone and the turn it back on again. I'm not sure if the problem is with my service provider or my phone, any help would be appreciated.

  Hey Kieran.

  I just want to point out a few grammatical errors, you did.

  (1) capital 'i' every time that it is the only

  (2) fix your run on sentences

  (3) "ooVoo. "a Soft video call, and.

  (4) entry

  (5) AN iMessage. not an iMessage

  Good luck to find ways to solve your problem, although I'm not sure why anyone would want to facetime someone who is illiterate.

  Much love❤️

• Map Blackmagic Decklink not appearing is not in the reading settings

  Just upgraded to first Pro CC - my Blackmagic Decklink Card is not displayed in the playback settings box.

  Hi Peter - Thanks for answering - Yes, I did install the latest drivers - but finally found a thread that solved the problem.  Turns out that Blackmagic installs drivers in its own Adobe folder - but Adobe doesn't want to see them in its own special folder (Application Support > commune > Adobe).  Once I moved all of the one folder to another, first could see the map very well.  They must be really look at a better way to deal with it - so it does not become a science project of emergency for people like me.

  Anyway, Detective Conan - for now.  Thank you.

• Transmission of 4 K Blackmagic Decklink extreme and mercury

  Try to configure CC 2014, but I don't see anything in the list of mercury pass except Adobe DV. I'm missing something here?

  You have installed the latest Blackmagic drivers?

  http://www.blackmagicdesign.com/support

  If you installed after effects CC 2014 once you have installed the drivers, you may need to reinstall the drivers so that the right files to install.

• WRT 160N V3 - signal drops after Firmware update

  Hi I recently upgraded the firmware on my wrt 160N v3 and changed security WPA2 Personal wireless from WEP (I needed to do this to get the speeds of a purchased wireless adapter recently).  Now the router stops transmitting a signal intermittently for about a minute before returning to the line.  The time between drops is also not the same.  Before updating firmware (and change security settings), the router has been solid as a rock.  Any suggestions on how to fix or maybe where I can get the old firmware version (which seems to be more stable than the current version)? THX

  You mentioned in your post that you updated the firmware. So, after firmware upgrade reset you the router? After the successful update, you need to reset the router. It is recommended to reset the router once. Steps to reset the router:

  Press the reset button on the router for 30 seconds, turn off the router, wait 30 seconds and then turn it on. Power light should blink when you perform the reset process.

  After reset, reconfigure the router, and then check the status of the connectivity.

  If the issue still persist then yry the following parameters:

  # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Click on wireless tab select the channel wireless at 6, 9 and 11. Click on save settings.

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then reconnect to the wireless network and then check the connectivity status...

• Out of my Blackmagic Decklink Card

  I need to use my card with my Adobe Premiere Pro Decklink in creative cloud.
  How can I set preferences for reading if I can't see the Blackmagic device in my preferences window?
  I need to install this mercury to pass or a few other drivers?

  The Blackmagic device works well with Adobe After effects. Why is it different with Premiere pro?

  [Shortened thread title.]

  Post edited by: Jim Simon

  for what it's worth, I tried two things... in that order.

  #1. (excerpt from another search)

  https://forums.Adobe.com/message/6482350

  a. clean uninstall of the desktop video 10.0.1

  b. installation of the Office 9.9.3 video (pass at this stage does not work)

  c. installation of 10.0.1 on the 9.9.3 (not clean uninstall)

  This may or may not have contributed to the situation...

  #2. It seems (also mentioned - er 'supported' - in other threads) that this situation does not like "atypical" frame rates simply changing my 23.98 AE composition to 23.976 immediately solved the problem.

• Download extremely slow speeds for CS6 trial version

  I'm trying to download the demo version of CS6, using the Adobe Download Wizard. It is extremely slow (currently says that it will take another 15 hours to download.) He was slain at 987 MB for more than two hours. I have a very fast fiber optic line and just has a speed test. I see download speed of 75,79 Mbs is not my broadband. I'm on Mac OS Lion 5.7.  and I have a lot of empty space. Any ideas of what is the problem?

  It is therefore not my broadband.

  In fact, it's probably. Because of the way ADM work supplements can be questions about these connections due to how manage the communication upstream and can dynamically switch IPs / channels in their multiplexers... Try a direct download using the method described here:

  Direct download links for Adobe software

  Mylenium

• Blackmagic Decklink

  I sent a request of Blackmagic as ask here.

  I have the Master Collection 5.5.1 on a 2 x 2.26 Mac Pro Quad-Core with 12 GB of RAM on OS X 10.7.2.

  I have the Decklink Studio 2 card that works with AE, Photoshop, and even when you drag a sequence in the monitor source of creation.

  But I can't get the Blackmagic Presets to load when you select a new Seqence in first. Blackmagic are missing only presets.

  Is this an incompatibility of Lion?

  Steve

  I just ran the 5.5.2 updated, uninstalled and reinstalled the video my Blackmagic returned sequence Presets and Blackmagic 8.6.1 office package!

• NB200 w/Atheros AR9285 - extremely low signal wireless

  I have bo9ught a laptop computer mini nb200 with Windows XP SP3 a year ago and I've always had a very weak signal (1 bar) wireless, but I blamed the router, I had. But recently I changed my router (EDIMAX BR-6204Wg) and a friend brought another laptop at home and the diference between the signal we had was amazing. while I was trying to conect to my router, it might even catch a signal public wireless to a park four blocks from here.
  I'm grateful for the help.

  PS: Sorry for my English.

  Hello

  How about WLan driver update?
  Here's the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

  How about deactivation for the WLan to save energy?
  You can do it in the operating system power management and the properties of card Wlan (-Wlan card-> properties > Device Manager)

• Removed the CS6 correctly but copy dragged / dropped cs6 disk hard iMac - now nothing works - HELP!

  So, what should I do now?

  Please remove CS6 in the computer and then download and install it from the following link: download Creative Suite 6 applications