Blackmagic Decklink

Similar Questions

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• No video signal Blackmagic Decklink and first Pro CC

  Hello

  I need assistance with first Pro CC and BM Decklink.

  I'm not able to get an output signal (external monitor, SDI and Composite) first Pro cc.

  Audio output works on SDI monitor.

  First off, it works very well with after effects CC and Blackmagic Software, so I'm pretty I'm missing something with the CEP settings.

  I use a Blackmagic Decklink HD extreme (9.7.7) and the latest version of CEP.

  Playback options are defined for playback Blackmagic (only), the sequence options are decompressed Blackmagic, 25 fps. video preview is Blackmagic AVI, Codec: uncompressed RGB 10bits.

  If someone could help me with this, would be great.

  Thanks in advance.

  What resolution is the calendar?  I had to happen if, for example, I have a chronology of 25 p 1920 and my monitor does not actually support P. 25

  In After Effects output resolution is defined in the video preview settings, while Premiere Pro outputs regardless of the sequence is defined on.  So, they can be on different parameters, which is why we could work and not the other.

  I use PC not Mac but I found the 9.7.7 drivers weren't very good with some devices and stuck with the 9.7.5.  I have not yet tried 9.8.  You could try their decommissioning.

• Map Blackmagic Decklink not appearing is not in the reading settings

  Just upgraded to first Pro CC - my Blackmagic Decklink Card is not displayed in the playback settings box.

  Hi Peter - Thanks for answering - Yes, I did install the latest drivers - but finally found a thread that solved the problem.  Turns out that Blackmagic installs drivers in its own Adobe folder - but Adobe doesn't want to see them in its own special folder (Application Support > commune > Adobe).  Once I moved all of the one folder to another, first could see the map very well.  They must be really look at a better way to deal with it - so it does not become a science project of emergency for people like me.

  Anyway, Detective Conan - for now.  Thank you.

• Migration of FCP7 PrPro CS5 - blackmagic decklink reading problem

  Hello

  First of all, I'm sorry for my bad English. Portuguese is my mother tongue.

  I am definitely changing... FCP7 PrPro CS5. FCPX... Well well... nothing new to say.

  I have a MacPro with a BlackMagic Decklink Extreme 3D. (latest drivers for BlackMagic and snow leopard).

  With 2 Apple Cinema HD 1920 x 1200 monitors, JVC professional instructor (SDI) and a Vieira Pana 42 "(HDMI).

  The problem is... I can't read anything on monitor JVC and Pana Viera.

  I chose the BlackMagic option in my preferences of the Player Menu.

  I can read almost anything with FCP7.

  Can someone help me?

  I'm sorry if I don't have my self clear.

  Thank you

  Make sure that you are using a Blackmagic mode, this is the only way to get the video through the editing map. Just start a new sequence and be sure to choose a "Preset" under 'Blackmagic Design'. Presets are exactly that and can be adjusted according to your needs.

• Problem with Blackmagic DeckLink HD Extreme 3D and Premiere Pro CS 5.5.1

  Hello

  I'm having a problem with the first and Blackmagic DeckLink HD Extreme 3D. When I create a timeline of Blackmagic of any sort and I import a film and start working on it, everything works as expected and are quite fast. I can see the image in the window of my monitor and the output to the external display of JVC is excellent (SDI). If I create another new project and in there I create a regular first screening chronology (in this case to edit Canon 5 d MKII footage) I can also change without problem (and with even better named Update).

  The problem appears when I try to have a timeline for Blackmagic and a predefined regular creation timeline in the same project. If I create the chronology of Blackmagic first, I can import and edit, but at the moment I have create a first preselection timeline screen goes black for a second (which always happens btw) and then comes back again. So I can edit the first timeline screening perfectly but the chronology of Blackmagic image stopped appearing in the monitor window. I can play, I can hear and I can see it in the external monitor of JVC. But on the computer screen the only thing I see are images that paint on it and somehow stuck in there get it looks like some sort of overlay problem. After that if I close first he won´t close properly. I have to force it out. If I first create a first timeline preset that works just fine but when I create a timeline of Blackmagic this work won´t (the first timeline works fine)

  So, my guess would be that first pass to a certain color depth or space when creating a first screening chronology and for some reason any the Blackmagic card won´t adapt or update so I find myself with no picture and the remains of some images that I place on the monitor window area. I can see the scopes and all waveforms but not the video. Also perhaps monitors and display port adapters have something to do. I'll change soon so monitors would be nice to know if it's part of the problem.

  Any idea? Waiting to hear from Blackmagic too.

  My specs:

  MS Windows 7 64 bit SP1

  Card mother TYAN S7025

  Two-processor Intel Xeon X 5650 @ 2.67 GHz

  32.0 GB Triple-Channel DDR3 @ 533 MHz (7-7-7-20)

  Graphics NVIDIA Quadro 5000

  System drive: 125 GB KINGSTON ATA (SATA) Device

  The data disks: Seagate 2X1954GB (SATA)

  Seagate 2x977GB (SATA)

  External Lacie RAID 5 TB (for backups)

  My monitors are 2 Apple Cinema HD 1920 X 1200, connected via 2 ports of graphics cards.

  BTW, this problem appeared before the named Update.

  Thanks in advance.

  Sergio Rozas

  www.usert38.com

  http://blog.usert38.com/

  I had a similar problem with a Matrox card.  The solution was to turn on the composition of the bureau.  It is under properties - TAB, show - system on the 4th in the advanced settings list.  Some programs (for example AVID) insist on this being extinguished, but with CS5.5 I needed active.  I have not tested this with dark magic devices.  It don't has not caused me a problem with CS5,

• Blackmagic Decklink codecs appearing is not on the sequence settings

  I am one of many failovers of the FCC who is getting used to the use of Premiere Pro.

  I use a Mac Pro with Blackmagic Decklink Extreme. When I start a new project, Blackmagic codecs do not appear in the sequence settings but first saw the release of Blackmagic Audio when I check in the preferences. I downloaded the latest Blackmagic drivers and install them, but I still don't see the codecs for surveillance.

  Anyone in the same boat or has any ideas?

  Thank you

  How Decklink driver version are you using?

  I currently use 8.0 and blackmagic presets is displayed correctly.

  In 'New sequence'--> parameters--> edition mode checks to see if there is an option "Blackmagic uncompressed.

  If this isn't the case, decklink plugins for first are not installed correctly.

  Do not forget that decklink drivers MUST be installed after the installation of CS5.5.

  Hope to be useful.

  Alessandro

• Out of my Blackmagic Decklink Card

  I need to use my card with my Adobe Premiere Pro Decklink in creative cloud.
  How can I set preferences for reading if I can't see the Blackmagic device in my preferences window?
  I need to install this mercury to pass or a few other drivers?

  The Blackmagic device works well with Adobe After effects. Why is it different with Premiere pro?

  [Shortened thread title.]

  Post edited by: Jim Simon

  for what it's worth, I tried two things... in that order.

  #1. (excerpt from another search)

  https://forums.Adobe.com/message/6482350

  a. clean uninstall of the desktop video 10.0.1

  b. installation of the Office 9.9.3 video (pass at this stage does not work)

  c. installation of 10.0.1 on the 9.9.3 (not clean uninstall)

  This may or may not have contributed to the situation...

  #2. It seems (also mentioned - er 'supported' - in other threads) that this situation does not like "atypical" frame rates simply changing my 23.98 AE composition to 23.976 immediately solved the problem.

• Capture device offline (Blackmagic DeckLink Studio 4 K)

  Just getting a new computer with 64-bit Windows 10. I use a Sony Vegas Pro 13.0 try and capture works very well. I close Vegas and load up Adobe Premiere Pro CC test, but the capture does not work. I get "Capture Device Offline".

  I use a Sony Handycam HD with HDMI, go to the map of the world BANK. I have the latest software/drivers for the card of the WB. As I said the Sony product works, but Adobe does not work. How Adobe that I buy a product that does not work.

  I tried to change the camera's 720 p, 1080 p and same 480i HDMI output modes. I tried DV and HDV settings in the software also. Hard, trying to find a page of diagnosis in the settings of the acquisition card, you know, like Skype from your webcam. But the only real parameters are "DV" or "HDV".

  Some help would be appreciated.

  You re - install the decklink drivers after installing the first test?

• Transmission of 4 K Blackmagic Decklink extreme and mercury

  Try to configure CC 2014, but I don't see anything in the list of mercury pass except Adobe DV. I'm missing something here?

  You have installed the latest Blackmagic drivers?

  http://www.blackmagicdesign.com/support

  If you installed after effects CC 2014 once you have installed the drivers, you may need to reinstall the drivers so that the right files to install.

• Blackmagic DeckLink HD Extreme 3D signal drops - CS6

  When I go to chronology to clip the viewer the signal falls for about 5 seconds. Every time I have to move forward and backward. I think that the new driver is not ready. I tried different resolution clips and they all have the same law. Kind of bummed because CS5.5 had so much with audio topics and external oversight I I was hopeing for a home run with CS6. If all goes well a kind of update will fix it. Don't know if its BMD or provide Adobe.

  FCP7 works perfectly with the same images and map BMD.

  Any suggestions?

  Mac Pro 10.7.3

  Video Fund 9.5.1

  SDI video output to a blackmagic SDI to HDMI mini converter that feeds of JVC monitor DVI to broadcast.

  I have spent some time in the settings of Blackmagic and found the issue of the origin of the problem.

  In BMD settings under settings system OSX I swithced to the last frame played (this is the default setting) for the extended desktop. He fixed it.

  Now source timeline a perfect with no signal drop reading.

• DeckLink black magic works only on mac

  I went recently final cut pro in preview. However the blackmagic decklink videocard does not work. That I can watch the clips via the map in the Viewer, but not from the timeline. So I can't control my work more.

  Does anyone have an idea what to do?

  Works! Thank you very much Eric!

• iMac 2015 randomly crashes and restarts

  I have a 2015 27 "iMac 4 GHz with 32GB of RAM from OWC and necessary devices connected via USB and Thunderbolt running El Capitan (updated) and are experiencing random crashes every day.

  Most of the time I'm just browsing through Safari. All of a sudden, the machine crashes, including the mouse pointer and after about 10 seconds the machine will restart and everything is back to normal, as if you start the machine manually. So, no messages saying: it was an unexpected stop, no accident recover/journalist, nothing.

  Checking the logs is without kernel panics. The only thing I can find in the system.log is a recurring cause:-128

  Encounter the same problem or does anyone know what this error code is talking about?

  (Devices: Sonnett Express SE II with Blackmagic Decklink and ATTO HBA H680, mini monitor that connects to a tape drive HP Ultrium 3000 SAS, a TVS - 871T, a Wacom Intuos 5 QNAP NAS and some card readers.)

  Thank you for posting a report EtreCheck of your system, and we can look for obvious problems. Please click on the link, download and install the software and run the report. Then copy and paste the report to your response to this message.

  If you want to know more about what is EtreCheck, just click on the link.

• U3014, A03, low noise level, Nov 2013

  After receiving insurance through Dell Small Business. the U3014 all new have at least Rev A03, I ordered another to replace a fading 3008WFP.  After you received yesterday, I ran through the installation program and checked everything, including the USB3 and operating an internal decoder 2-channel audio.  I use the standard Dell AX510 sound bars on all my monitors to reproduce audio embedded with HDMI signal sources and nVidia Quadro Display Port K5000 than card outputs.  My other Dell, a new U2713H and an old 3008WFP monitors, work very well with their AX510 sound bar.  However, the same inputs HDMI and Display Port on the U3014 produce a less than 13 dB audio output.

  A sound signal to 1/20th of the normal level makes its unusable AX510 with my new monitor U3014 bar.  Since I do HDTV edition, I need to use the U3014 to monitor the video and audio from my reading of BlackMagic Decklink 4 k Ultra HDMI as long as the audio embedded on my nVidia Quadro K5000 video card display Ports.   (BTW: USB3 parts work fine)

  Everyone knows a similar problem of audio low on their screens of U3014?

  This is an update to the original message of low audio output:

  After contacting Dell Small Business Tech Support.  Dell sent me a replacement U3014 monitor via FedEx overnight.  After that I connected to my system and it turned on, I was pleasantly surprised because audio Digital Envoy through the HDMI ports and DP was NORMAL.  In addition, the display of U3014 had no corner visible backlight line, as it is 'normal' for this view.  But the strong "glow" IPS limits how close you work at the screen of the monitor.

  However, after about 30 minutes the audio level fed by the Audio Jack Out U3014 for Dell AX510 went way against.  A different sound bar did NOT help.  When I plugged the Audio Out jacks on my U2713H and U3014 monitors to the audio meters of Sony Sound Forge Pro 10 six channels and I saw the same 13 dB drop in the two channels that the first U3014 suffered.

  

  The two U2713H (audio channels 1 & 2) and the U3014 (channels 3 & 4) were fed the same HDMI DirecTV output. The recorded maximum concentrations are at the right end of the Green level bar poster.   These show the difference between the output taken on two audio monitors.  The output of U3014 is 13 DB below the output of U2713H.   When turned on the U3014 was identical to the U2713H!  After 30 minutes the audio output of U3014 level has dropped.

  My guess is that something in the digital audio receiver has failed.  And, since the two U3014 monitors are close in the serial numbers, this failure is likely to happen all U3014 in the same factory lot.

  Given that most of the users of U3014 is not to monitor the audio digital integrated on the inputs HDMI or DP, there are not too many reports of this problem.  Those who intend to use the U3014 of audio and video surveillance on HDMI or RFP decision taken entry need to check this problem.

  Bill Wood

• First pro takes a long time to open

  Hello

  I recently installed the latest version of first (2015.4) on a Windows 7 x 64 service pack 1.

  Config: Intel (r) CPU Xeon X 5660 2.80 GHz 2.80 GHz (2processors).  -40 GB of RAM

  There's a blackmagic decklink which works well with the first. An internal RAID5 have been added to the computer.

  When I try to launch the pro first by clicking on the icon or open a project, the startup screen and load the stuffs, everything looks good. When he writes "initialization of the application", the splash screen disappears. The first pro icon is not highlighted more. Adobe Premiere pro is still in process in the Manager list task. Nothing happens for 10-15 minutes. After that first pro appears and everything works in it...

  I cleaned the trash prefs and uninstalled, reinstalled Premiere pro.

  He not take this time early in the week, he was quick and direct. I don't have this problem for other adobe (for example media encoder) applications.

  Thanks in advance to pay attention to my problem.

  A few thoughts that come to mind are to check and remove any third-party firewall and antivirus.

  You could also try creating a new user account Admin and see how it works there.