Blank number pages on after connecting to the ECP, only happens to few users. other users works perfectly well.

Similar Questions

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

• SIM-Free iPhone bought in Dubai, United Arab Emirates UNITED, to aid in the countries of the EU without iMessage and restriction of FaceTime. iMessage WORK PERFECTLY WELL, even on cell phones, but no FaceTime. Please tell me why?

  Hello to all on the Apple community!

  Recently, I bought the iPhone SIM-Free from the shop Duty Free in Dubai World.
  I used my iPhone in Dubai very shortly and I did not have iMessage and FaceTime option on my phone. I know that laws of United Arab Emirates telecommunication UNITED and I know why people out there have this apps.
  But when I arrived in my born country last week I put the new sim card without restriction for iMessage and FaceTime and when I open the Message in the settings, I saw "Power" toggle iMessage and I was surprised that it is possible that. When I pass switches on 'On' for iMessage, who runs BEGIN WORK PERFECTLY FINE WITHOUT ANY PROBLEM EVEN on LTE network.

  When I try to do the same thing with FaceTime, I saw that there is still no menu FaceTime in settings. I'm looking for in my iPhone and I find everywhere FaceTime app (Notification centar, use of boxes, installed Apps etc etc...), I want to say the FaceTime app is in my phone but is disabled and not showing somеhow.

  Please someone who knows this situation to respond to my question: can I activate FaceTime work as iMessage works now on my iPhone?
  Thank you!

  
  

  This is because one of the configuration files of the iPhone disables it for iPhones with AB, AE and AH maybe just before the / is their model numbers. If a Middle East SIM card in the iPhone, it can substitute for it, but no SIM card non - Middle Eastern won't. There is no other way to substitute it, or get FaceTime on your iPhone outside the Middle East.

  (142566)

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• After that turn the power off for a few days and then back on... all my desktop ICONS was reorganized.

  After that turn the power off for a few days and then back on... all my desktop ICONS changed. I placed the worms where I want that they and computer restarted and they get rearranged again. Help, please.

  Hello Kenneth Pincus,

  You can create a new profile on the computer and if the desktop icons stay on their position. If this is not the case, the other profile is corrupt. To create a new user profile, you can see the article mentioned below for the procedure.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

   

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  Let us know the results.

• Laptop connects to the local only

  I have a toshiba laptop windows vista and when I try to connect to wireless internet it just says limited 'local only' or 'access' to 'unidentified network '.

  My laptop is grateful that there is a wireless router, but doesn't seem to connect to the internet so she. It also does not work when I connect it with the wired connection.

  I live in a shared home and computers portable all my other roommates to connect to internet through the router wireless very well. We recently got the router installed (28 September), but I was absent when everybody connected to the wireless router. Can you help me as soon as possible please?

  Thank you

  Hello

  (1) since when are you facing this problem?

  (2) don't you make changes recently?

  I recommend the following methods.

  Method 1

  Stack TCP/IP reset go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  Also follow the troubleshooting steps.from the links mentioned below.

  The problems of Internet connection
  

  Problems with connections Wi-wired and wireless
  

  Network connection problems

  I hope this helps.

• When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  When I try to convert a .pdf file to Excel, I have an error message 'no internet connection' and I'm connected to the internet.  Happen in different contexts of internet access.

  Hi rhondas44981464,

  Try to use the export to PDF online service https://cloud.acrobat.com/exportpdf (Sign In using your adobe ID, in which you have the subscription).

  Kind regards
  Nicos

• Whenever I start one of the applications, it checks the certificate into the internet. If I'm not connected to the internet (including happans quite often), I can't work. Is there a way to get around this?

  Whenever I start one of the applications, it checks the certificate into the internet. If I'm not connected to the internet (including happans quite often), I can't work. Is there a way to get around this?

  Always the same?

  It is important to activate the hidden files and folders view.

  Most of the SLCache material will be too, hidden by default and the program data folder.

  Open the C: drive.

  N ° 1)

  Go to C: > Program Data > Adobe.

  Open the Adobe folder and locate the folder named SLStore.

  Rename SLStore old SLStore.

  
  

  Step 2)

  Navigate to C: > Program Files common files > Adobe.

  Under Common Files > Adobe, find the folder named SLCache.

  SLCache open folder and all its contents to the backup on the desktop folder.  You must create a backup manually and move the content of SLCache.

  Note : make sure SLCache is empty.

  Then launch installed apps CC and identify yourself.

  Once you have signed and launched the application.

  Quit and restart and check.

• All the applications in the creative cloud crashes at random times. Always worked very well, now he doesn't. [was: crashing]

  All the applications in the creative cloud crashes at random times. Always worked very well, now he doesn't. It crashed just before I updated, and after that I just updated. Photoshop, illustrator, After Effects, first everything crashing. Adobe pretty edgy.

  Please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... its

  I have the latest version of FF and the latest version of Roboform... everything has worked perfectly until an hour ago... now the Robofrom toolbar will not work... says not compatible... it is activated in Add ons... nothing has been put to day or changedf suddenly just no toolbar and it will not tie

  RoboForm will probably have an update for Firefox 30 when Firefox 30 is actually out, if not sooner. No need to turn off the automatic updates now.

• Hi, I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

  Hello

  I have the iphone 6 in warranty period... .working perfectly, but I want to exchange it with the iphone 6 s. Please suggest.

  If your phone is in warranty period or not has nothing to do with trying to swap an iPhone for a s 6 6.

  Apple not no trade ins, so you have to sell your iPhone 6 to finance the purchase of a new s 6, or you can use the Apple recycling.

  The only other thing you can do, it's that if you bought your phone directly from a carrier rather than Apple, you can exchange your phone with a carrier in order to upgrade to a 6 s.

  That's all.  Other than that and if you bought at Apple, you must sell your iPhone 6 and use that money to buy a 6s instead.

• Unsuccessful login message - error message after "connection to the network is taking longer than usual"

  -All right, so I won't try to describe my problem by telling you what happens when I try to connect to any other network that my own home network (a school, work, network etc.).

  First of all, I try to connect and I get the message:

  "network connection takes more time than usual ' which of course is soon followed by the message"connection failed"after which said the logo of the network on the lower corner of the taskbar"

  this computer has limited or no connectivity"click to run a repair and three options including".

  automatically get new ip for the "wireless network connection" network card settings«»

  Reset the network adapter', and there is no internet here (I'm paraphrasing this one of course). "

  Now, sometimes if I click on one of the service options and the connection starts immediately, sometimes I have to click two options, one after the other fails to solve the problem, sometimes, I have to click on them each several times before it works (you one and two of another, for example).

  most of the time receiving the message ' windowstried a repair but a problem persists. " This computer has limited or no connectivity"between the stages of repair. I know that of not explore because I used mozilla firefox and google chrome and I get the same problem. I even tried to reboot once the connection has failed the first time. My computer is up to date and I have passwords for my school and respective secure networks of works.

  Y at - it as any indication of what could happen here for me to have to reset and click and wait and fix almost every time that I get on any network, but my home network?

  Thank you for your time,

  Bryan

  Hello

  Hello

  You scan the computer and make sure that it is clean of viruses and malware.

  Download the latest drivers for the wireless card from the support page for the manufacturer of the laptop computer and update the drivers for the card.

  After that.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  -----------------------

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problems connecting to web pages, email, am connected to the internet (Vista Ultimate (I think))

  I have a new problem.  My laptop is more than a year and no problem connecting to the Internet.  I changed my security software and now am connected to Internet but can't access the web pages or e-mail.  I tried a lot of solutions suggested here.  I did a system restore and cannot yet access the Internet.  I uninstalled Norton and installed AVG 9.0.  I tried to uninstall AVG and are still unable to access.

  Help!  I spent 4 hours on this and nothing seems to work.

  Thank you!!

  Donna

  Hello Dprice-crc,

  Check if you have the latest drivers installed for your network card. You can visit the computer or the Web site of the manufacturer of the device to see if you have the latest drivers installed for your network card.

  Try to reset the TCP/IP stack:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  If nothing works, try to uninstall and reinstall the network adapter.
  ========================
  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your driver CD. After installation, create the connection.

  Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.

  You can read the article that will give you all the steps to troubleshoot network connectivity issues:
  http://support.Microsoft.com/kb/936211

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running).
  2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER:

  Inetcpl.cpl

  The Internet Options dialog box appears.
  3. click on the Advanced tab.
  4. Under Reset Internet Explorer settings, click Reset. Then click again on reset.
  5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog.
  6. restart Internet Explorer.
  For you reference, you can visit the link for the following Article:

  http://support.Microsoft.com/kb/923737

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Get rid of Web page errors when connecting to the webvpn

  It's on an ASA5505

  I have a question about the resolution of errors in the web browser when you try to access my vpn ssl interface to download Anyconnect.

  I use self-signed certificates.

  The webvpn page that will allow users to connect to get the anyconnect client.

  For webvpn page I do not use a domain name FULL only her public IP address of the external interface.

  For example, I want the clients to connect to https://x.x.x.x/AnyConnectVPN and get the anyconnect client. They will receive the webbrowser error, noting that the certificate is not approved. After that install the cert to the root that goes now, I'm trying to keep from getting the error "The URL that you use to access the site does not match the name in the certificate."

  Can I specify the exact page I want vpn users to enter the name of the object CN?

  Crypto ca trustpoint Identity_Certificate

  LOCAL-CA-SERVER key pair

  ID-use ssl-ipsec

  no name FQDN

  name of the CN=x.x.x.x/AnyConnectVPNobject, OR IT_Dept, O is is BUSINESS of TEST, C = US, St = FL, L = Daytona[email protected] / * /

  Thanks for the help.

  Triton

  The trustpoint you created needs to have the subject name of "CN = x.x.x.x", you do not need to include the "/ AnyConnectVPN".

  Hope that helps.