Bleed between two pages?

Similar Questions

• Fade between two pages & MC from the other control.

  Let me see if I can explain it properly. I usually use a motion tween and the alpha channel to fade video clips or rear. What I'm currently doing is a bland page out and the other, but it could be one of the several MCs I have essentially four "pages" for a Web site, including the services, portfolio, about and contact. I have icons in my navigation bar (which will be imported into my XHTML separately, so it can float their depending on the size of the users window). The icons need to navigate between pages and pages should fade in and out (eg. melted in the MC Services when the services icon is clicked and melted out of it and in the MC of portfolio when the user clicks on the icon portfolio). Please keep in mind that the icons and pages are in completely different fichiers.fla/.swf because I could not understand how them float in Flash after several hours of searching around online, but know I can do it easily using div + CSS in XHTML tags.

  If someone could explain how quickly "gotoandplay" a label in a file different .swf (communicate between the NavBar .swf and my main .swf) and fade out of the current MC (regardless of the page the user is currently using) before disappearing into the new page (according to the user clicks on the icon of the tool), I'm sure I could "fill in the blanks" of the rest of the AS3 and Flash I already know. The page must also melted off the page everything that there is currently on when the user click on the Hide button (located on the page in the main .swf file). There are also several sub-pages on each page (which shouldn't be a big problem if I understand the rest of this point).

  I'll use this same concept for almost all of the websites I design & develop in the future and really need to know how to do this for the current site, I'm trying. I would greatly appreciate suggestions on how to accomplish these two things.

  PS Please keep in mind, I'm not an expert in AS3, but am very computer savy and have done my share of programming in the past. I looked around for hours in line to try and fill it without using the forum, but concocted with dead links tutorials and short answers left and right. I hope I don't fall on the same thing here.

  From what I've read so far, I think I can use Tween in ActionScript instead of a motion on the timeline Tween to fade in and out of clips and think that this is the method to use to accomplish what I am trying to do. Correct me if I'm wrong well.

  You can use the LocalConnection class to communicate between different files in the web page.  For more information just Google 'AS3 LocalConnection' or search for it in the help documentation.

  For interpolation, you can use Actionscript.  AS3 has the Tween class integrated, but for control and better performance, most people will recommend you go Third party and use TweenLite (or TweenMax for a tween that is more complex than what you explained).

• Transfer data between two pages

  I have a login page where I'll give you the user name and password, after a successful login, I receive a LoginToken from the server I have to use for the particular user's information in the next page (profile page).

  My problem is that I get the LoginToken when I login in the login page, but how can I pass this LoginToken on the next page?

  I thought to create a file and write the token in this file and in the profile page I'll still read this file and send the LoginToken server and server will give me for this profile in return xml file.

  Y at - it another way to keep the information and send it to the following html page?

  And I do not know how to create a file and write data inside.

  PS: I looked at the file API

  BlackBerry.IO.fil

  but he's only mentioned anything here about writing in file

  You can always store small pieces of information the traditional way through cookies.

• Incompatibility of County of form element between two pages

  Hello

  I have a small application that is used to validate and update a table of MS Access. The process works like this...

  During the initial entry, a temporary table is dropped and re-created with the content of a master.

  The user changes lines with five areas, including lists, and text fields. Click on save changes and a new cfm script is run. This page is intended to validate all entries of all the lines in the previous script. Where nothing is not valid, it is marked on the temporary table, and once all the rows have been control processes is returned to the original script.

  Since this isn't the first load of the page, the temporary table is not removed. All rows that have invalid data are highlighted so that the user can correct the entries and try again.

  The first thing I do in my validation scripts is to make sure that the data I receive have the same number of lines. Given that hide an average field may not get passed to the second script.

  There are 298 lines on the main table. There are 298 lines on the copy of the table validation.

  However, when the second script is called the second form field returns a value of 299.

  < cfset counter1 = #ListLen (Form.shortname) # >

  < cfset counter2 = #ListLen (Form.description) # >

  etc...

  4 meter tell me there are 298 entries, but counter2 returns to 299.

  When I look at the result on the screen of the first script there is only 298 rows.

  I'm damned if I can see this being the cause.

  UH... I use Dreamweaver CS4 and Coldfision MX on my XP Server.

  Anyone have any ideas?

  I wonder if any of these items is empty. I could be wrong, but I think remember that in CFMX, he would count empty elements, and perhaps change this behavior with CF8.

  To debug this, you could be stuck writing a loop on this list and the output of each value.

  Maybe something like this:

  Description: #listGetAt (form.description, i) #: short name: #listGetAt (form.shortname, i) #.

• Simple?  View two pages side by side with gap

  This has feeling me very, very stupid.  Tired on Friday, while I'm no doubt on what is obvious.

  I have two pages in my InDesign document. They will become a pivotal two-sided poster.  The two posters look good side-by-side and will have a certain continuity of #1 à #2, but NOT butt.  Each page/posters will be printed in a separate document (bleed on all sides).

  The person who asked this work will appear down to display it on the screen.  All I want to do is let them view these pages on the screen-by-side with a small gap between the two, so they can get the idea of appearance posters when printed and articulated.

  Not as a spread where they end to end to the other.

  Not one page after another vertically.

  I just do not know how to do this.

  Thank you.

  Set up your document in spreads. Insert a page between two pages. change the size of this page for the 1/2 inch wide. You may need to change the settings of magins to 0 for this page first.

  Just tested in CS5 on a Mac and it works.

  On the bottom of the Pages palette there are three icons, a bin for deleting pages to create a new page, and a third icon used to change a selected page size.

• How we prevent scrollbars on spreads with an Image on the two Pages?

  Has anyone noticed that a spread with a large image (or graphic) stretching across two pages creates a vertical scrolling between two pages, whenever the iBook Viewer window size is adjusted? No idea how to prevent this? I guess I have to divide my images into two halves?

  In the EPUB export dialog box, select: "convert across landscape Page.

• A gap of two pages with extra half a page that will be folded up?

  Hello:

  I'm working on a children's book which is mainly composed of photographic images with some very simple texts on top. The size of each page is 23 x 23 cm with 0.7 purge cm on all borders. This means a normal spread of two pages will be 47.4 cm x 24.4 cm.

  Now the problem I'm facing is the following:

  There are two series that should have an extra 11.5 cm 'page' (included in the spread) which is printed in such a way so that the child will be able to fold and unfold. (A spread is on the back of the other, so the line of division of the folding area should coincide exactly on both spreads, the left side of a spread, one to the right of the back of the spread). These two series will be done on both 23 x 23 cm pages, more THAN the 11.5 cm extra page (the area that will be folded or unfolded) + bleeding. My question is: How do you create such a spread in ID? Unlike all other pasta spread, when there is only one line in the middle between the two 23 x 23 cm pages, in other words, I need to create a gap with two lines of division: a conflict between two 23 cm pages and another which marks the end of one of the pages two 23 cm and the beginning of the additional 11.5 cm page. So, in total, seen in a landscape view, we would have a spread which is:

  0.7 cm purge + 23 cm [division line] page 23 cm [line] 11,5 cm folding a page + 0,7 cm bottom

  and her back spread it is:

  serving 0.7 + 11.5 cm foldable [line] 23 cm [division line] page 23 cm one page + 0.7 purge cm cm

  All this because I need the printer to ensure the propagation fold line perfectly coincides with the reverse propagation fold line.

  I hope that my explanation is not source of confused.

  Thanks a lot for your help!

  Daniel

  When a guide that you want to display in the background area lost and the editing of like drawing table (win) key ctrl or cmd (mac) while dragging the rule guide.

  Bob

• How to do a two-page spread in photo books?

  How to do a two-page spread in photo books?

  Hi Myrte Veach,

  If you want to add pages to your photo book project, please follow the steps below.
  
  

  Add, remove and rearrange the pages of book

  You can add, remove, or reorder pages from the book. You can insert new pages anywhere in a book, except between the cover on the outside and the inside cover page.

  Note: A book must have an even number of pages. If the change in the number of pages creates an odd number of pages, Photos automatically adds or removes a blank page to keep the number of pages to an even number.

  Click project on the toolbar, and then double-click the book.

  Do one of the following:

  Add a page: select the page you want the new page to follow, and then click Add a Page in the toolbar and choose Add a Page.

  Set the number of pages in a book: click on the book settings button in the toolbar and drag the number of Pages.

  Remove a page from a book: click on the page to select and press DELETE, or click on the button Add a Page in the toolbar, select the Page to delete, then click on continue. You can also click on the page, select the Page to delete, then click on continue.

  Move a page in a book: rest the pointer over a page number until the page button, and then drag the button on the page to move the page to a new location. You can also select a page, and then drag the button to the page.

  Create a photo book

  The link above will give you a lot of information on the creation of your Photo book. Please use the Apple Support communities to post your question. Good day.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Want to use internet to share WRV210 router between two LANs

  Hello

  I have the following scenario:

  A LAN has access to internet via ADSL through a Fortigate 50B (192.168.100.0)

  A new LAN (different segment) that should have access to the internet. (192.168.102.0)

  Two local networks need to have shared access resources among themselves.

  We have a WRV210 router between two LANs (192.168.100.0 WAN, 192.168.102.0 on LAN) configured in router mode.

  Resources work very well, but internet does not work.

  We receive answers internet addresses on 192.168.102.0 ping and tracert works very well, but we cannot navigate or connect to Skype, msn msg, etc..

  We made on fortigate 50B routes this way:

  192.168.102.0/255.255.255.0 192.168.100.102 internal

  192.168.100.102 is an address WAN WRV210

  We tried the gateway mode and internet works fine on 192.168.102.0, but 192.168.100.0 cannot contact 192.168.102.0 resources (obviously)

  What can be wrong in case of ping and tracert works very well, but nothing else works?

  Hi Willy,.

  You need the WRV210 in not the router mode gateway mode.

  Gateway mode active Stateful inspection, which will address translation from private to public IP addresses and NAT....

  "But I think that the VLAN on the router segments members to talk to other members on the other vlan, so your comment.

  Two local networks need to have shared access resources among themselves. "creates a problem.

  .

  A community previous publication says "with Port Based VLAN on the WRV210, there is no VLAN tagging and so on." It's more like say port 1 not to talk to port 2, because they are on separate physically designated VLAN (even if on the same subnet) and it is far as it goes. But with your configuration you want also to have the 2nd SSID do not talk to any wired client based on the RVS4000 as well? If so, this facility would not work because all wireless clients would be able to talk to cable customers and vice versa. But if you primary concern is simply to prevent the SSID 1 speaking with 2 SSID, it's doable in the page VLAN for the WRV210.

  So if you want the WRV210 to allow switching between the VLAN port basis, it won't work the way it is set up now...

  If you want to restrict access between IP hosts, I suggest using the list feature to access a managed switch that focuses on the PC or servers.  A switch may be as a series of 200 or 300 small businesses switch, see URL below...

  http://www.Cisco.com/en/us/products/ps10898/prod_models_comparison.html

  But then allow all ports to be a member of the VLAN by default.  I hope that I read your question correctly

  Best regards, Dave

• L2l VPN between two ASA5505 works not

  Let me start who I know a thing or two about networks.  VPN not so much.

  I am trying to configure a Site-toSite VPN between two ASA 5505.  I am building this in a laboratory of the Office before I deploy it to the end sites.  I are the indications on this very informative forum and think I have it set up correctly.  I can see the tunnel is being built and I see same incrementation of the traffic counters.  But the real user sessions do not seem to work.  For example, ping and telnet does not work.

  An excerpt from the syslog for a ping test on a computer on the remote end.

  (10.1.10.5 is the local computer, 10.1.11.5 is the remote computer.  10.1.11.1 is the interface of the ASA remote interior)

  6. January 20, 2012 | 01:04:12 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:10 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:04:07 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:05 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:04:02 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:04:00 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:03:57 | 302021 | 10.1.11.1 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0 ICMP
  6. January 20, 2012 | 01:03:55 | 302020 | 10.1.10.5 | 1. 10.1.11.1 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.1/0
  6. January 20, 2012 | 01:03:48 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:46 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  6. January 20, 2012 | 01:03:43 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:41 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  6. January 20, 2012 | 01:03:38 | 302021 | 10.1.11.5 | 0 | 10.1.10.5 | 1. Connection of disassembly for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0 ICMP
  6. January 20, 2012 | 01:03:36 | 302020 | 10.1.10.5 | 1. 10.1.11.5 | 0 | Built of outbound ICMP connection for faddr gaddr laddr 10.1.10.5/1 10.1.10.5/1 10.1.11.5/0
  5. January 20, 2012 | 01:03:32 | 713041 | IP = 192.168.24.211, initiator of IKE: New Phase 1, Intf inside, IKE Peer 192.168.24.211 address local proxy 10.1.10.0, address remote Proxy 10.1.11.0, Card Crypto (outside_map)

  This is the configuration for one of them.  The other is configured in the same way with the usual across settings.

  ASA Version 8.2 (1)
  !
  hostname ASATWDS
  !

  names of
  name 10.1.11.0 remote control-network
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 10.1.10.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 192.168.24.210 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  access extensive list ip 10.1.10.0 outside_1_cryptomap allow 255.255.255.0 255.255.255.0 network-remote control
  access extensive list ip 10.1.10.0 inside_nat0_outbound allow 255.255.255.0 255.255.255.0 network-remote control
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 192.168.24.1 1
  course outside remote control-network 255.255.255.0 192.168.24.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 10.1.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 192.168.24.211
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  card crypto outside_map 1 phase 1-mode of aggressive setting
  card crypto outside_map 1 the value reverse-road
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 10.1.10.5 - 10.1.10.36 inside
  dhcpd dns 209.18.47.61 209.18.47.62 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  tunnel-group 192.168.24.211 type ipsec-l2l
  IPSec-attributes tunnel-group 192.168.24.211
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:b4bea5393489da3aa83f281d3107a32e

  The Configuration looks good to me, but I think that you don't need next: -.

  card crypto outside_map 1 phase 1-mode of aggressive setting

  card crypto outside_map 1 the value reverse-road

  Anyway,.

  1 > can you please check if the computer you are trying to Ping or Telnet isn't the Machine based Firewall or anti-virus or iptables (Linux)?

  2 > dough out of the

  a > sh crypto ipsec his

  b > sh crypto isakmp his

  Manish

• Dynamic calculation of the number of days between two dates in a table

  Hello

  I'm working on request where I dynamically calculate the number of days between two dates in a table.

  The calculation must be dynamic, i.e., when I recover the Start_date and End_date and move to the field following (call_duration) in the same row, the difference must be calculated dynamically in this area and make sure the field read-only.

  APEX version: 5.0

  Hi BO123,

  BO123 wrote:

  Hello

  I'm working on request where I dynamically calculate the number of days between two dates in a table.

  The calculation must be dynamic, i.e., when I recover the Start_date and End_date and move to the field following (call_duration) in the same row, the difference must be calculated dynamically in this area and make sure the field read-only.

  APEX version: 5.0

  one of the way to do this by calling ajax on change of end_date.

  See the sample code given below to fetch the resulting duration and making the field read only after calculation

  Step 1: Change your page

  under CSS-> Inline, put the code below

  .row_item_disabled {
    cursor: default;
    opacity: 0.5;
    filter: alpha(opacity=50);
    pointer-events: none;
  }
  

  Step 2: Create on demand Ajax process I say CALC_DURATION

  Please check Procces Ajax, see line 6.7 How to assign a value to the variable sent by ajax call

  Declare
    p_start_date  date;
    p_end_date    date;
    p_duration number;
  Begin
    p_start_date  := to_date(apex_application.g_x01);
    p_end_date    := to_date(apex_application.g_x02);
  
     --do your calculation and assign the output to the variable p_duration
    select p_end_date - p_start_date into p_duration
      from dual;
  
    -- return calculated duration
    sys.htp.p(p_duration);
  End;
  

  Step 3: Create the javascript function

  Change your page-> the function and the declaration of the Global Variable-> put the javascript function

  You must extract the rowid in the first place, for which you want to set the time, see line 2

  assuming f06, f07 and f08 is the id of the start date, and end date columns respectively, and duration

  See no line no 8 how set the value returned by the process of ajax at the duration column

  Replace your column to the respective column identifiers in the code below

  function f_calulate_duration(pThis) {
    var row_id  = pThis.id.substr(4);
    var start_date = $('#f06_'+row_id).val();
    apex.server.process ( "CALC_DURATION", {
    x01: start_date,x02: $(pThis).val()
  }, { success: function( pData ) {
  // set duration to duration column
  $('#f08_'+row_id).val(pData);
  // disable duration column
  $("#f08_" + row_id).attr("readonly", true).addClass('row_item_disabled'); }
  });
  }
  

  Step 4: choose the end date call the javascript function

  Go to report attributes-> edit your Date column end-> column-> Attrbiutes element attributes-> put the code below

  onchange="javascript:f_calulate_duration(this);"
  

  
  

  hope this helps you,

  Kind regards

  Jitendra
  

• How to add images between two elements

  I'm having a great time to find it.  I was asked to add an image between two elements.  Here's a mockup of what the layout with the image will look like:

  

  But I tried everything and I keep breaking the code and can't make it work.  I did a stripped down version of this page so you can see what the code looks like:

  Homepage

  Any help is appreciated.  Thank you.

  This will get probably get a bit of a hole - (MAKE A BACK-UP OF YOUR PAGE FIRST)

  Find the code below:

  http://www.amazon.com/Reclaiming-Parkland-Bugliosi-Assassination-Hollywood/dp/1626365334/r ef = sr_1_1? s = books & ie = UTF8 & qid = 1378592566 & sr = 1-1 & keywords = recovery + Parkland"> Amazon.com»

  Get rid of all the code that follows - down up to this code:

  The decline and fall of Jim Fetzer

  Copy and paste the code below instead:

  Image goes here

  Press articles

  Comments

  News

  Then style upward a little h2 tags with some css:

  I'll let you get back links/anchors on the h2 tags.

• How to center the object between two guides (or a guide to the edge of the artboard)

  Simple question: How can I Center an object between two guides or between a fence and the edge of the artboard?

  Chris,

  You can (guides are your friends):

  (1) create a rectangle between two Guides or between the fence and the edge of the artboard by ClickDragging with the Rectangle (desired penalty) tool on a (location) on the other Smart Guides say path/path or page/path when you're there;

  (2) select the two rectangle of 1) and the object, and then click the rectangle, and then use the options in the align palette.

  Who should move your object in the Center in the direction you choose.

• How to add a space between the pages of Indesign CC spread

  Hello

  I'm looking for an answer to add a space between pages to spread, but I have found none, not DC at least. Can someone help me please?

  In the attached picture is the exported PDF, you can see that the two pages are similar to one.

  

  Thanks for your help!

  Julius

  If all you want is to see a gap of page when you view a PDF file in Acrobat, export to PDF from InDesign mayonnaise. When the single page PDF is ready, open it in Acrobat and go to view > Page Display and implement two continuous. For the first page on its own, select view > Page Display > Show Cover Page during two places.