Block of text over the image sequence

Similar Questions

• Place the text on the image linked... block!

  Hello world!

  Its possible to place the block of text to the image using java script.

  the text in text frame is the name of the linked picture. someone to help me if possible...?
  

  
  

  Thanks in advance.

  -yajiv
  

  
  

  
  

  Hi, I rewrite it.

  var app.activeDocument.rectangles = TGT;

  for (i = 0; i<>

  myCaption = app.activeDocument.textFrames.add ();

  myCaption.textFramePreferences.verticalJustification =

  VerticalJustification.BOTTOM_ALIGN

  tgt [i] .graphics = myCaption.contents [0].itemLink.name

  myCaption.paragraphs [0] .justification =

  Justification.CENTER_ALIGN;

  NSDB = tgt [i] .visibleBounds;

  myCaption.visibleBounds =

  [NSDB-6 [0] NSDB [1], NSDB [0] - 1, NSDB [3]];

  }

  How about it?

  Ten

• Text in front of the image sequence

  In InDesign, I have a block of text at the top of a sequence of Folio Overlay images.

  When I preview the it, the text will appear for the first image in the image sequence, then disappears.

  How can I do to be visible for the entire sequence?

  I found adding the text in a floating framework is the best way to do it. Make sure that the empty frame in which you paste the text block is bigger that the text frame itself.

  I tend to use 'Auto-detect' for the direction and made in the form of "vector".

• Text in MSO disappears at the top of the image sequence

  Hello. I have a sequence of images to auto-play, and I want a text is displayed above it after the image sequence plays. I put the text in an autoplay MSO, the first State being a box empty. The text appears so when I saw using the content for the Desktop Viewer, but it does not appear when I saw on the iPad, or when I update the folio article. How can I get the text?

  Why the first State is empty? The two States should be identical, set to play once and stop finally State.

• How can I create a series of blocks of text using the Excel list values?

  It is first of all, the first script I am trying to write from scratch. I'm completely green at the script and I picked up a few bits of ID Adobe scripting guide, but nothing has really stuck still relating to this particular goal.

  My supervisor maintains a master list of advertising space, with the name of the account, is the width of the space, and how space is the height, in an Excel sheet. These spaces can number in the hundreds, and I'm stuck manually drawing a rectangle for each space, which takes a lot of time.

  I would like to create / helped to create a script that will take these values and "magically" to draw these spaces in the form of blocks of text, with the width (in columns) and the height (in inches) defined by the values in the main list, as well as the name of each account in the subsequent text frames.

  The script didn't necessarily need to be able to pull the values directly from the Excel sheet; Can I transfer a file text if necessary, or directly in the script, values he change because I need it. A great thing (if she is not able to pull directly from an Excel sheet) which is the number of spaces a week changes, and so do the accounts and the width and height. Accordingly, it would be ideal that values of the sheet could be modified easily, in order to create a new set of spaces as necessary.

  Positioning for each space is not crucial, only the height and width. If they were all on top of each other on the same page, it is a result for me. The main idea is to not have to draw them all manually, one by one.

  For me, this looks like a command, but I hope that some experienced there Scripting Guys can help me, because I want to become experienced as well.

  Thus, the TL; DR version:

  -Script to draw a series of text blocks.

  -Size of the text boxes should be defined by the values width and height of spreadsheet Excel.

  -Text blocks must have the account name as content (from account in the Excel worksheet names).

  -Accounts, width and height changes every week in the Excel sheet, so must be relatively easy to exchange all values.

  -Width values on the Excel worksheet columns. It would be ideal that the script could turn those numbers into multiples of columns as necessary.

  -Script (optionally) can take values directly from Excel sheet.

  -Script (option) can set the fill color for the gray text frame. (If it works as I think, I could just select all the resulting images of the text myself and put them all to grey at the same time... I'm not lazy as )

  Thanks in advance to anyone who can help in any way possible, even if it's just a little push in the right direction. This script will save 1 to 2 hours of boredom every week.

  Look like the perfect thing for the InDesign scripting.

  I copy content from Excel to a text file, for a format easily read in InDesign, and there will automatically be a TAB for each 'cell', just using copy and paste.

  Here is a piece of code, perhaps you could go on with (the addition of variable to change pages and the location on the page and other things).

  The readFileLineByLine function, can be easily reused with any function using "recall". You simply tell the function what you want to be executed for each line of text that reads:

  const COLUMN_WIDTH = 2; // Define the column width in inch
  
  var pageIndex;
  var textFramesExported; // not implemented.
  
  // Add a new dokument. Set myDoc to app.activeDocument to use
  // the current document instead of creating a new one.
  var myDoc = app.documents.add();
  
  // The doSomethingWithTextRow function is called upon for every line of text read.
  readFileLineByLine('c:\\test.txt', doSomethingWithTextRow);
  
  function doSomethingWithTextRow(row){
      // We expect the text line to be TAB separated (\t = TAB). We get that from just copying the contents of an
      // excel file into a text document.
      var cells = row.split('\t');
      var companyName = cells[0]; // The Company name in the first slot of the array
      var width = COLUMN_WIDTH * cells[1];
      var height = cells[2];
  
      // Create a new text frame for every row handled
      if (pageIndex==undefined) pageIndex = 0; // Count up when you have exported a number of texts, I leave this for you to do.
      var newTextFrame = myDoc.pages[pageIndex].textFrames.add();
      newTextFrame.contents = companyName;
  
      // The text frame is created in the top left corner.
      newTextFrame.geometricBounds = [0, 0, height + ' in', width + ' in']; // Top, Left, Bottom, Right 
  
      // You might want to move the textframes to other positions, keeping track of how many you put out per page.
      newTextFrame.move( [10, 10] );
  }
  
  function readFileLineByLine(path, callbackFn){
      var myFileIn = new File(path);
      if (File.fs == 'Windows'){
          // This was probably added to recognize UTF-8 (even without its start marker?)
          myFileIn.encoding = 'UTF-8';
      }
      myFileIn.open('r');
      var myEncoding = myFileIn.encoding;
      try{
          if (!myFileIn.exists){
              throw('Missing file: ' + myFileIn.fsName)
          }
          var ln = '';
          while(!myFileIn.eof){
              // Read the lines from the file, until an empty line is found [now as a remark].
              ln = myFileIn.readln()
              // if(ln !='' && ln!='\n'){
                 // Call the function supplied as argument
                 callbackFn(ln);
              // }
          }
      }catch(e){
          alert(e);
          gCancel = true;
      }
      finally{
          myFileIn.close();
      }
  }
  

  The file in C:\ in my example was recorded in UTF-8 format and looks like this (showing hidden characters):

  

  Post edited by: Andreas Jansson

• Blocks of text on the Pages of body 'Buried' after update of the Page Master

  I have a background full screen on my main page (on the left in this case) that integrates static graphics and borders for certain master pages. I use the borders/boxes for NOTE and END of text on some pages. Blocks of text on these master pages do not overlap. I added text blocks with my icons and the text of the note to these body Pages that I need them. All great so far.

  I decided to update the background chart on page master to change colors, etc.. All files are linked.

  Now, with funds master page updated, these pages where I added text blocks are 'buried' as on a sublayer. I checked that my Master Page background images are "sent back". I tried to wear my text boxes at the front on the Pages of my body, but they are still hidden. Interesting as the anchored frame (the icon), I attached to each NOTE or TIP point appears, but the text is not. Also, I can see and select the contours of the block... the text is hidden. If I drag the fame to another part of the document (for example, on top of another Master Page text frame sank, while the text is displayed.

  There is no image on the master page to the enclosed area. I wonder if that's what I need trouble. Just add a backstory (not attached flow)?

  Advice before I go and screw something else?

  It is what it is supposed to look like (1). Image (2) what I mean now.

  

  

  Thanks Arnis,

  It was the property of skin! How simple... I didn't have on this subject.

  Solved!

  To answer you question, however... my approach for the construction of this new model was:

  1. I created a graph from bottom (full page) to contain the image of brand and imported/positioned.
  2. I placed the header and a footer frame and filled with content.
  3. I placed the blocks of text with streams (as a single stream in this document).

  I'm not dropping blocks of text for the content of the body... except for these tips and remarks. I don't want to use a workflow for this because I never know where they'll pop up and I want to be able to (position) specifically on each page. Is this a good approach?

  Yes, I'm aware of the continuous line down the block of text NOTE you mentioned. Originally, I had all the text within the limits. When I have updated master, all offbeat pages (only in blocks of text body page with notes/tips). I repositioned and they flow very well now.

  Thank you very much for your help continues with it. Why these problems always pop nitpciky - up to date - not when things are slow!

• Text on the image of the façade descends behind the image

  See attached screenshot. I have a tab control of façade 1 with a .jpg as background image, and I'm putting text on this image. Place the text on the image is ok, but sometimes, not always, when I change the text or move on the image, the text ranks BEHIND the image and I can't bring it back to the foreground, or in front of the image. He's unpredictable. What I am doing wrong?

  

• the text or the image sometimes 'break up' in a State of fuzzy, illegible

  original title: fuzzy text or image

  Since I installed Windows 7, the text or the image sometimes 'break' in a blurry, unreadable state.  It happens in Word and other programs. It seems to be no reason for when it will occur, but lately it often happens when I play Solitaire. Sometimes the screen alternately clear, blur, lighten, etc..

  Hi threadsmith

   

  Method 1:

  You can use the hardware and troubleshooting of devices and also the display resolution of quality issues. Check if this can help to solve problems -

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  
  See below the link assistance and control-

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

   

  Method 2:

  Step 1 :
  To resolve the problem, you can check if uninstalling and reinstalling then the display driver allows.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Cut the text from the image using the Pathfinder tool

  Hi all

  I'm cutting text from an image in Illustrator. I use the version on a Dell XPS 12 CS6.

  I have scoured the internet for instructions and have tried everything, but when I followed the same steps in Illustrator I don't get my desired result. I created the contours for the text, so that the image and text are on the same layer, grouped (and dissociated) and then I tried all the options in the pathfinder, nothing helps. I've done it before with an image, but for some reason can not get it to work this time.

  I even tried to make the image in a clipping mask, so it would be a 'form' instead of 'image', but that didn't do anything either.

  If anyone has any advice, I would greatly appreciate it that I spent hours trying to figure this out!

  Thank you!

  Erin

  Pathfinder will not work with a path and a picture.

  Instead, put your text above the image (it can be the living text), select both.

  You can then use the button do mask in the transparency to cut your text on the image palette.

  

• Text in the image reactive?

  I have a problem with the text in a reactive image.

  
  

  I create an image it reactivates in width and height and put a legend on it (in the container of the photo).

  When I begin to change the width of the browser, the text jumps out of the container in the photo.

  Bringing together two points does not solve the problem.

  Is there a way to keep the text on the image (in the image container)?

  Any ideas?

  Of course, it would be possible to create a text frame and place the image in the background of it, but then the image is not admissible height, which could spoil the mobile design.

  Otherwise it would currently be impossible to create captions in images...

  THX!

  Hi Tibor,

  Maybe this helps: workaround

  Abhishek

• How to delete a single text and add text to the image in photoshop cc?

  How to delete a single text and add text to the image in photoshop cc?

  Please try again by following the link: How to remove the text from the Image in Photoshop - YouTube

• I have a license of an image (certificate), it still has the text on the image, I can't delete or edit text

  I have a license of an image (certificate), it still has the text on the image, I'm unable to remove or change the text... flatten on the certificate

  Using Illustrator to edit? It is an .ai file that is editable by Illustrator or any compatible graphics program. He edits the fine in Illustrator. I deleted the name of course in this screenshot.

  

• How can I make the text in the image, like a signature in a corner?

  How can I make the text in the image, like a signature in a corner?

  Do you need to do it for a lot of pictures?

  Look closely.  It should be under file > processing of multiple files.  Make sure you don't overwrite your original files.

  If a single file, make a copy of the file, create your image in a separate layer and reduce the opacity.  Then flatten image and save it.

• Dynimic text on the Images in the slide show

  I have three images that load in a slide show. Is it possible to have three different dynamic text on each image?

  I could apply the text to the images in Photoshop, but the images go across the width of the browser.

  Thanks in advance.

  Have you tried to use the part of the legend in the slideshows. They now allow you to do what you want to achieve.

  You can add a different caption for each image and place it correctly (although it will have the same position and style of the text for all images).

  See you soon,.

  Vikas

• is it possible to add text to the image automatically

  Hello
  
  I have a picture that shows the flags of the 2 countries... I want to show the income they generate each day. is it possible to add text to the image (top) using the values of a table.
  
  Please advice

  tparvaiz wrote:
  fac586,

  can you please share what you have in the oehr_countries, the oehr_customers table and the oehr_orders

  http://www.Oracle.com/technetwork/TestContent/Oehr-sample-objects-131098.zip?ssSourceSiteId=otncn

  See + {message identifier: = 4522141} +.