block specific external ip address

Similar Questions

• Is it possible the RV320 one block IP external only certain IP on my LAN?

  Hello

  I was blocked in firewall rules some external IP address, but it will be applied to all computers on the LAN.

  I would like to know if it is possible do to the only group of ip or vlan?

  Thank you

  Raphael Guarita

  Raphael.

  When you select the Source address and destination, you should be able to choose the range. There is no option to select a VLAN.

  http://www.Cisco.com/c/dam/en/us/TD/docs/routers/CSBR/rv320/Administration/Guide/en/rv32x_ag_en.PDF

  -Marty

• Retrieve the external IP address of the router from a paralytic

  Hello

  I'm working on a workflow, that the provisions, a complete paralytic, I have nearly all that work, the only issue I am running into is not able to shoot/get the external IP address of the router once that vApp is put into service. Does anyone know which API can I gives the floor to get that information? I have attached a screenshot of the NAT tab in the firewall of vApp to give more details on the specific element, I'm trying to recover. Any help would be greatly appreciated.

  Thank you

  J

  Here's an excerpt from one of my workflows in test I use to inspect a vApp on vCloud Director with vCO 5.5 5.5:

  System.log("=== Network Configurations ===");
  var networkConfigurations = vApp.getVappNetworkConfigurations();
  for each (cfg in networkConfigurations){
      System.log("href: "+cfg.href);
      System.log("Description: "+cfg.description);
      System.log("isDeployed: "+cfg.isDeployed);
      var netConfig = cfg.configuration;
      System.log("ipScope: "+netConfig.ipScope);
      var routerInfo = netConfig.routerInfo;
      if (routerInfo != null){
          System.log("External IP: "+routerInfo.externalIp);
      }
  }
  

  I would like to know if this is useful, I just double it checked by running against one of my vApps has a similar configuration (NAT and Port Forwarding) and it displays the correct external IP address for me.

  [2014-02-18 11:41:33.514] [I] === Network Configurations ===
  [2014-02-18 11:41:33.515] [I] href: null
  [2014-02-18 11:41:33.515] [I] Description: This is a special place-holder used for disconnected network interfaces.
  [2014-02-18 11:41:33.515] [I] isDeployed: false
  [2014-02-18 11:41:33.515] [I] ipScope: null
  [2014-02-18 11:41:33.516] [I] href: null
  [2014-02-18 11:41:33.516] [I] Description:
  [2014-02-18 11:41:33.516] [I] isDeployed: true
  [2014-02-18 11:41:33.516] [I] ipScope: null
  [2014-02-18 11:41:33.516] [I] External IP: 192.168.1.61
  

  

• your external IP address for port forwarding

  OK, so I want to do a game server, but... There need Port Forwarding, so I called my InternetServiceProvider "Clear."

  Claire told me that "WE DO NOT support the external Ip addresses: then I was then told that I have to call HP because that's what my PC is under.

  I decided to go to the site and ask because they want a $ 60 million tax which is good, but... I don't have the money! This is why I need a server. In any case if you can please give me a video or tell me how do it in the response that would be LARGELY APPRECIATED!

  -Sincerely

  VladmirTodd

  Go to portforward.com and use their tutorials.

• How to block specific Web sites from my PC

  I have XP Pro SP3.  How to block specific Web sites to come on Internet Explorer?  Thank you!

  Yes my brother you can block specific Web site in your pc, I got a job for you

  visit-

  How to block specific Web sites from my PC http://www.technet2u.com/2012/09/how-to-block-any-websites-using-host.html

• PAP2T loses the connection when the external ip address changes

  I have a PAP2T adapter connected behind a Netgear DG834GT router.  Usually, I have no problem, however, my ISP has been known to change the dynamic IP address from time to time.  In this case the adapter will stay online until the reg expires during which he is not able to save the time and I get the error "unable to connect to the server.  Therefore, the only way I can get the adapter to work again is to restart the router, then restart the adapter.  If I reboot the adapter only it will not connect.

  I have the router providing a fixed ip address via DHCP. I have active STUN and the I the active NAT and NAT keepalive mapping.  The "reg expires" is set to 60.  When the adapter is connected correctly, it shows the external IP correctly.  However, it will not update after the external ip address change until I have restart the router and adapter.  I thought to get a static IP address, but try to avoid paying for it. Is this a common problem?

  I'm rather new to VOIP and I hope I have given you enough information.  Any help would be appreciated.

  Thank you

  Kirk

  I finally got to work.  It turns out that I had to do an update of the firmware on the router and then place the card in the demilitarized zone.

• EA4500 smartwifi: the router's external ip address

  Hi I have an EA4500 with interface smart wi - fi.

  I need the ip address provided to my router by my internet provider so I can remote desktop into my home computer using port forwarding.

  I could not find the IP address of my router.

  Under connectivity, the internal ip address is listed, but not the external ip address.

  Can someone point me in the direction of the rite.

  Thank you

  Vik

  @vikramjit.gill Hi! Instead of going to the connectivity, select troubleshooting, and then click Diagnostics. You will see your Internet IP address on this page. This is the IP address of your ISP. I hope this will help you!

• Block a public IP address

  Hi I have a V2 E4200 and it is updated to firmware Linksys Wifi Smart... Is it possible to block a public IP address?

  # It is not so smart than that.

  You would need a real firewall.

  http://www.pfSense.org/

  http://doc.pfSense.org/index.php/IP_Blocklist

• How to block specific sites from my computer?

  original title: program block

  How to block specific sites from my computer?

  Use a parential control program, or you can block your network using your router control panel.
  The parential controls Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls
  K9: http://www1.k9webprotection.com/

  teengeek.freehostingcloud.com Microsoft community contributor

• Is it possible to automatically send all faxes received on a Windows 7 computer to a specific E-mail address?

  Original title: transmission of faxes received by e-mail

  Hello

  Is it possible to automatically send all faxes received on a Windows 7 computer to a specific E-mail address?

  Thanks in advance.

  LM

  Hello

  I would like the links and check if that helps.

  Configure your computer to send and receive faxes

  Receive a fax with Windows Fax and Scan

  Hope this information helps. If you have any other questions about Windows, please let us know.

  Thank you.

• Multiple firewall RV042 external IP addresses

  Hi, I hope someone can give me an example of what I need to do, if possible with the RV042

  Main uses of IP address external port forward for some ports, all OK.

  I would like to have other external IPs assigned to computers on my local network

  Basic host multiple servers for web, on different IP addresses, using port 80...

  for example, 202.x.x.1 port 80 using port before going to 192.168.168.1

  202.x.x.2 port 80 using the firewall rule to access 192.168.168.2

  202.x.x.3 port 80 using the firewall rule to access 192.168.168.3

  all other ports should show stealth

  (192.168.168.2 should show the external of the 202.x.x.2 address when you go to whatismyip.com)

  From what I read, it seems that the RV042 can do this, but I'm not real clear on what my rules should look like.

  I think my rule of priority for each external IP address would deny all traffic first for each machine on the local network.

  Then create a new entry with source of 202.x.x.2 80-> 192.168.168.2 port?

  How do you I put my rules to do so, and what settings should I on the network card of the second machine?

  very happy, thank you!

  The order of these two rules should be reversed.

• How to add an external IP address to a split tunnel?

  Hello

  I've set up VPN access on my ASA box as customers use a split tunnel so that only on our internal network traffic through the tunnel. Now, I need to add an external IP address to this tunnel. Is this possible, and if so, how can I achieve that? Just add the address to the list of tunnel network does not; If I do this, the client cannot connect to the external address at all.

  Can anyone help?

  Cheers, Georg.

  Hello

  Will need to see some configurations.

  Usually incoming VPN traffic bypasses ACL interface. If you have the default setting, you will need to allow traffic to the pool/subnet VPN server. Unless of course the server already has a rule that allows traffic to a "some" source address.

  Also a likely problem may be your NAT configuration.

  The local IP address of the server the public IP address is included in the current NAT0 configurations for the VPN connection? If yes then which will probably cause problems for connections to its public IP address. Traffic could be abandoned due to a RPF NAT audit that basically checks the NAT that corresponds to the traffic in the opposite direction.

  Therefore to confirm the above things, or share configurations, then we can do it.

  To my knowledge by adding the address IP of the Split tunnel should naturally also be taken.

  EDIT: The number of the station 6000

  -Jouni

• Remote Desktop for the external IP address is no longer works

  Hello and thanks for your help.

  For months I could access my desktop from my laptop (via Remote Desktop) / Tablet (via PocketCloud), both inside and outside my network.

  Recently, the external IP address for my router has changed. As this happened, I was not able to access my desktop to the outside.

  Other possible factors:

  -A had a problem of invalid system disk on my desktop which has been resolved by changing the boot order.

  -J' I registered a domain name, which I redirected to the old IP address. I have since updated the domain to redirect to the new IP address.

  I tried the IP address and the URL (using my domain name) to try and MOP with no luck.

  Any suggestions?

  Thank you

  Hello

  I suggest you post this question in this forum to improve assistance:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• adjustment rule - how to allow internal pc ping external ip address?

  I eventuall put in place the PIX501 and everything seems fine except the internal pc cannot ping the DNS server and the external ip address. Still exceeded demand. I allow all outbound icmp traffic and especially udp traffic. I have also allow a part of tcp traffic and reject all others. We have access to the internet but just when ping external IP and DNS, for example, when I ping www.google.com, it can resolve ip from google, but procrastination requst.

  What are the rules that I set up to allow internal pc ping external ips?

  See you soon

  ICMP incoming via the PIX is denied and outgoing ICMP is allowed, but the incoming response is denied by default allowed both it as below:

  access-list 200 permit icmp any any echo or echo-reply

  Access-group 200 in external interface

  Kind regards

  Mehrdad Arshad Rad

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.