Block the corruption of the media - analysis of the root causes

Similar Questions

• How to check the root cause of ISE hung device?

  Hi guru Cisco.

  One of the device of ISE of my client has just hung this morning.  He has rebooted and is back in business.

  However, the client wants to know the root cause.

  Is there a dump file that I can analyze?  Logging does not seem to have this information.

  Thank you.

  "show support" in the cli can enlighten us. (First set "term len 0" and connect the output - it will be over 10,000 lines).

  There are also a number of newspapers still more detailed - they are listed when you run 'tech show' that the TAC can analyze if necessary.

  If the problem is recurring they can ask you to activate certain debug level logs for more supporting information,

• How to analyze a crash dump to determine the root cause of the dump?

  Hello, I have a desktop computer that breaks down frequently.  EventViewer showed that blue screens keep on occurring.  We suspect it is a new software that has been installed and have a few dumps, but would appreciate any advice on playing the dumps to make sense.  Thank you
  \|/

  Hello

  BlueScreenView execution and it displays the information in a very readable format.
  is simple and fast. BlueScreenView is not as accurate for the specific CAUSE
  WinDBG however it brings a wealth of information - and it's still very
  simple to use,

  BlueScreenView - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  When you click on each top of the article Bug_Check the lower part displays the
  Names of files containing more information. Sometimes, the CAUSE is the real cause
  but more likely, it's what has been assigned (or pushed to the fault) by something
  on the other. Check commands/options menus, and right-click
  While in BlueScreenView.

  How read partial memory dump files that Windows creates for debugging
  http://support.Microsoft.com/kb/315263/en-us?p=1

  Check this thread for more information using BlueScreenView, MyEventViewer and
  other methods of troubleshooting BlueScreens - answers top 3 (+ 1 more). This
  Convenience store is for Windows 7, however, she also works for XP and Visa.
  the main differences are using RUN instead of start - search (for XP).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  WinDBG is a more complete debugging tool.

  How to read the memory dump file that is created by Windows if an incident occurs
  http://support.Microsoft.com/kb/315263/en-us

  Using the Microsoft Windows Debugger (WinDbg)
  http://kipirvine.com/ASM/4th/debug/WinDbg/index.htm

  WinDbg
  http://en.Wikipedia.org/wiki/WinDbg

  Download and install the debugging tools for Windows (use the SDK)
  http://www.Microsoft.com/whdc/devtools/debugging/default.mspx

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• FCPX jump during the import of the band. Analysis of the root causes?

  Dear friends,

  I have a camera Sony TRV-900F video connected via FW800 to an iMac late 2009 with 16 GB of RAM, a quad core i7 2.8 and one 1 original to HDD with El Capitan.

  When I import one of my miniDV tapes (which are between 2000 and 2012 about and been wound and rewound before capture and which were mainly recorded in one take on new tapes Sony and never reused) FCPX any images in fragments of random size (from a few hundredK to 10-14 MB) and frequently shows loss of images and some audio distortion imported into the timeline and re-read.

  Final tried to create archives first and then import, but the result is the same.

  What I don't understand, is that, at least apparently, none of these problems of 'corruption' appears if I look/hear the tapes in camcorder Sony itself!

  I tried to use iMovie and same fragmentation occurs so I guess it is not related to the SO FCPX itself.

  So far, I have received the iMac 1 TB hard drive and now have tried to import on a 128 GB SSD in a USB enclosure (which is USB3, but if I'm not mistaken my iMacs USB ports are USB2). Even to jump occurs.

  Maybe I need to configure the SSD in a different way and to define not only as the backup directory for imports?

  If the best ideas don't come to mind the next tests I'll make are:

  (a) purchase of a NEW band and try to record and import from it. If it works, this would indicate the older strips are damaged, but it does not explain why they look good in the camera.

  (b) purchase a head cleaning cassette and to use it carefully and see if he would heal playback and import.

  Thanks for your suggestions.

  Post edited by: robertfromroma. Added the MacOS version. FCPX is 10.1

  Try the import with QuickTime player and see if you get the same results.

• What could be the root cause of the ESXi host hard reboot?

  Hi all

  How to make the difference between a hard restart of restart gracefuly go ESXi log?

  the rating below, I have a problem with mysterious ESXi sudden reboot by itself after midnight.

  28 sep 14:46:57 pass: 2010-09-28 14:46:57.860 11A57B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/Sol10_prodproxy/Sol10_prodproxy.vmx' current update heartbeatStatus: Green

  28 sep 14:46:58 pass: 2010-09-28 14:46:58.660 31C7EB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/puppet/puppet.vmx' current update heartbeatStatus: yellow

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow config.annotation

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow config.files.vmPathName

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow config.guestFullName

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow config.uuid

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow guest.hostName

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow guest.ipAddress

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: global version overflow 1216 name

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow recentTask

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow runtime.connectionState

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow runtime.host

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow runtime.powerState

  28 sep 14:46:58 pass: ERProviderImpl::_GetChanges: aggregate version 1216 overflow runtime.recordReplayState

  28 septembre 14:47 pass: 2010-09-28 14:47:00.553 11B19B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/RHEL55x64_websphere01/RHEL55x64_websphere01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: pass 03: 2010-09-28 14:47:03.642 31BBBB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/forfour/forfour.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: pass 03: 2010-09-28 14:47:03.930 31BFCB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/coresecurity-dev01/coresecurity-dev01.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: pass 03: 2010-09-28 14:47:03.967 31B39B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/ascari/ascari.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 config.annotation

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 config.files.vmPathName

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 config.guestFullName

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 config.uuid

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 guest.hostName

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 guest.ipAddress

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: global version overflow 992 name

  28 septembre 14:47: 05 pass: ERProviderImpl::_GetChanges: aggregate version overflow 992 recentTask

  28 septembre 14:47: pass 05: 2010-09-28 14:47:05.225 31B39B90 verbose "vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/LinDeb_staging01/LinDeb_staging01.vmx" fresh General real VM: 147750912 bytes

  28 septembre 14:47: pass 05: 2010-09-28 14:47:05.228 31B39B90 verbose "vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/autobahn-dev01/autobahn-dev01.vmx" fresh General real VM: 105496576 bytes

  28 septembre 14:47: pass 05: 2010-09-28 14:47:05.246 31B39B90 verbose "vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/RHEL55x64_websphere01/RHEL55x64_websphere01.vmx" fresh General real VM: 399400960 bytes

  28 septembre 14:47: 05 pass: RefreshVms overhead for 3 VM update

  28 septembre 14:47: pass 05: 2010-09-28 14:47:05.919 B 11995, 90 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/iveco/iveco.vmx' verbose, current heartbeatStatus of update: yellow

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 resourceConfig

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 config.annotation

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 config.files.vmPathName

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 config.guestFullName

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 config.uuid

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 guest.hostName

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 guest.ipAddress

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 recentTask

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 runtime.host

  28 septembre 14:47: 10 pass: ERProviderImpl::_GetChanges: aggregate version overflow 624 runtime.powerState

  28 septembre 14:47: 13 pass: 2010-09-28 14:47:13.386 31B39B90 verbose 'vm:/vmfs/volumes/4b138dc4-22818a39-7f20-001e4f1b3048/mackback/mackback.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 13 pass: 2010-09-28 14:47:13.386 11AD8B90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/fortwo/fortwo.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 13 pass: 2010-09-28 14:47:13.386 31CBFB90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/LinDeb_spark01/LinDeb_spark01.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 13 pass: 2010-09-28 14:47:13.387 31C7EB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/fnd-dev01/fnd-dev01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 13 pass: ERProviderImpl::_GetChanges: aggregate version overflow 1424 resourceConfig

  28 septembre 14:47: 14 pass: airfare to CIMOM version 1.0, root user

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: aggregate version overflow ha-host hardware.systemInfo.model

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: aggregate version overflow ha-host hardware.systemInfo.uuid

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: aggregate version overflow ha-host hardware.systemInfo.vendor

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: version overall ha-host name overflow

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: aggregate version overflow ha-host summary.overallStatus

  28 septembre 14:47: 14 pass: ERProviderImpl::_GetChanges: aggregate overflow ha-host vm version

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.AssetTag.label' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.AssetTag.summary' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.ServiceTag.label' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.ServiceTag.summary' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.AssetTag.label' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.AssetTag.summary' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.ServiceTag.label' planned for the module 'enum '.

  28 septembre 14:47: 14 pass: by default of resource used to ' host. SystemIdentificationInfo.IdentifierType.ServiceTag.summary' planned for the module 'enum '.

  28 septembre 14:47: 17 pass: 2010-09-28 14:47:17.471 11A57B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/oralinux2/oralinux2.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 17 pass: 2010-09-28 14:47:17.860 11A16B90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/inspectorworks-dev01/inspectorworks-dev01.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 17 pass: 2010-09-28 14:47:17.860 31BFCB90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/Sol10_prodproxy/Sol10_prodproxy.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 18 pass: 2010-09-28 14:47:18.317 31C3DB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/LinDeb_staging01/LinDeb_staging01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 20 pass: 2010-09-28 14:47:20.554 31B7AB90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/RHEL55x64_websphere01/RHEL55x64_websphere01.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 20 pass: ERProviderImpl::_GetChanges: aggregate version 1552 overflow resourceConfig

  28 septembre 14:47: 23 pass: 2010-09-28 14:47:23.968 319B9DC0 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/ascari/ascari.vmx' current update heartbeatStatus: yellow

  28 septembre 14:47: 23 pass: ERProviderImpl::_GetChanges: aggregate version 800 overflow resourceConfig

  28 septembre 14:47: 24 pass: 2010-09-28 14:47:24.135 11AD8B90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/decisionworks-dev01/decisionworks-dev01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 25 pass: 2010-09-28 14:47:25.243 11A16B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/mack/mack.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 25 pass: 2010-09-28 14:47:25.274 31B7AB90 verbose "vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/oralinux2/oralinux2.vmx" fresh General real VM: 398438400 bytes

  28 septembre 14:47: 25 pass: 2010-09-28 14:47:25.276 31B7AB90 verbose "vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/rhel5_websphere/rhel5_websphere.vmx" fresh General real VM: 211795968 bytes

  28 septembre 14:47: 25 pass: RefreshVms overhead for 2 VMS update

  28 septembre 14:47: 26 pass: 2010-09-28 14:47:26.471 B 11995, 90 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/mypermits-dev03/mypermits-dev03.vmx' verbose, current heartbeatStatus of update: Green

  28 septembre 14:47: 26 pass: 2010-09-28 14:47:26.471 31CBFB90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/amarok/amarok.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 27 pass: 2010-09-28 14:47:27.837 11A57B90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/coregwt-dev01/coregwt-dev01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 28 pass: 2010-09-28 14:47:28.826 319B9DC0 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/LinDeb_Jira4/LinDeb_Jira4.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 28 pass: 2010-09-28 14:47:28.826 31BBBB90 verbose 'vm:/vmfs/volumes/4a00f72c-edda6033-77a9-001517ab4e9e/autobahn-dev01/autobahn-dev01.vmx' current update heartbeatStatus: Green

  28 septembre 14:47: 28 pass: 2010-09-28 14:47:28.901 31B39B90 verbose 'vm:/vmfs/volumes/4b626b35-1c969249-e654-001ec9f0c731/rhel5_websphere/rhel5_websphere.vmx' current update heartbeatStatus: Green

  28 septembre 14:51: 43 vmklogger: demonized successfully.

  28 septembre 14:51: 43 vmkernel: TSC: 0 cpu0:0) Init: 293: cpu 0: beginning tsc measured speed is 2327501023 Hz

  28 septembre 14:51: 43 vmkernel: TSC: 18578 cpu0:0) Cpu: 346: id1.version 10676

  28 septembre 14:51: 43 vmkernel: TSC: 32774 cpu0:0) CPUIntel: 300: Intel Enhanced SpeedStep is supported but disabled in BIOS

  28 septembre 14:51: 43 vmkernel: TSC: 36946 cpu0:0) CPUIntel: 361: C1E enabled by the BIOS

  28 septembre 14:51: 43 vmkernel: TSC: 41881 cpu0:0) Cpu: 408: mask APIC ID: 0xff000000

  28 septembre 14:51: 43 vmkernel: TSC: 45227 cpu0:0) Cpu: 1057: initial APICID = 0x0

  28 septembre 14:51: 43 vmkernel: TSC: 49091 cpu0:0) MicrocodeIntel: 485: signature update 60600000000, platform ID 18000088640720.

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 54306) Cpu: 1304:38 physical bits, 48 bits virtual

  28 septembre 14:51: 43 vmkernel: TSC: 57932 cpu0:0) Cpu: 1836: MTRR: cap = variable 0xd08 with 8 MTRR on BSP 0

  28 septembre 14:51: 43 vmkernel: TSC: 62909 cpu0:0) Cpu: 1872: MTRR: deftype = 0xc00, active bit = 1 type and default value = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 68936) Cpu: 1591: MTRR Variable 0: start = mask 0 x 0 = 0x3f80000800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 74879) Cpu: 1591: Variable MTRR 1: start = mask 0 x 0 = 0x3f00000800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: 79541 cpu0:0) Cpu: 1591: Variable MTRR 2: start = mask 0 x 0 = 0x3e00000800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 84217) Cpu: 1591: Variable MTRR 3: start = mask 0 x 0 = 0x3c00000800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 88872) Cpu: 1591: Variable MTRR 4: start = mask 0 x 0 = 0x3f80000800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 93555) Cpu: 1591: Variable MTRR 5: start = mask 0 x 0 = 0x3fffc00800 end = type 0 x 0 = 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 99197) Cpu: 1744: start = 0 x 0 type = 0 x 606060606060606

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 104146) Cpu: 1744: start = 0 x 80000 type = 0 x 606060606060606

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 108451) Cpu: 1744: start = 0xa0000 type = 0x0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 111811) Cpu: 1744: start = 0xc0000 type = 0 x 505050505050505

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 116074) Cpu: 1744: start = 0xc8000 type = 0 x 505050505050505

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 120127) Cpu: 1744: start = 0xd0000 type = 0 x 5050505

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 123669) Cpu: 1744: start = 0xd8000 type = 0x0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 126861) Cpu: 1744: start = 0xe0000 type = 0x0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 130109) Cpu: 1744: start = 0xe8000 type = 0 x 505050500000000

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 134162) Cpu: 1744: start = 0xf0000 type = 0 x 505050505050505

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 138166) Cpu: 1744: start = 0xf8000 type = 0 x 505050505050505

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 2336551) Cpu: 186: type 2

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 2349641) Cpu: 187: numCores 4, numHT 1

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 2352749) Cpu: 189: L2 cache: size 6291456, Assoc. 24

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 2356011) Cpu: 191: L3 cache memory: size - 1, Assoc. -1

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 2360869) Init: 300: BSP Apic ID: 0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42670712) ACPI: 1326: found PDSP @ 0xf1ce0 @ 0x000f1d04 RSDT

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42677257) ACPI: 1201: valid RSDT @ 0xf1d04

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42694708) ACPI: 1381: address = 0xe0000000 reserved MCFG = 0x0

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42698670) ACPI: 1201: valid FACP @ 0xf1e48

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42701589) ACPI: 1394: RTC Century Byte offset NVRAM: 0 x 32

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42894866) VGA: 209: 8 screens

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 42897771) VGA: 1046:16 pixels high

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 120086967) VMKKBD: kbd0: atkbd0, generic (0), config:0 x 0, flags: 0x1f0000

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 120091440) VMKKBD:

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 134217874) from vmkernel initialization...

  28 septembre 14:51: 43 vmkernel: TSC: cpu0:0 134269338) BootConfig: 16: coresPerPkg = 0

  all comments and suggestions is appreciated in advance.

  Kind regards

  AWT

  Albert,

  I highly recommend using open Manger of dell to make your surveillance equipment it is crucial to be able to go back and look at problems like these coming out not where.

  Remember to follow instructions well and that you install the correct version - serves us in our environment and it has proved valuable.

  See you soon,.

  Chad King

  VCP-410. Server +.

  Twitter: http://twitter.com/cwjking

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• The root of the oracle/jpub/runtime/dbws/DbwsProxy class does not exist

  Hello
  
  I am using UTL_DBWS to call a Web service and get an error "ORA-29540: oracle/jpub/runtime/dbws/DbwsProxy of class does not exist"
  
  his back and forth between me and operations, I have aske to load the package, but still the script fails. Is it possible to confirm if the package is loaded, as the script below
  
  as sys:
  Select the State of the object where
  dbms_java.longname (parameter) = "oracle/jpub/runtime/dbws/DbwsProxy";
  
  Please help to find the root cause

  Please check if you have subsidies on UTL_DBWS.

• BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  BLOCK the POPUP is supposed to stop some analyses online.  How to kill my popup block?

  < email published by host >

  Safari > Preferences > Security > Web content:

  Uncheck "block pop-up windows".

  

• How can I block the annoying social media tabs that open web pages on the left side. they totally block what I'm trying to read. I have more ad block

  I have ad block more with the help of masking extension element. Yet these annoying social media tabs always opens on the left side of many pages. What makes the small available playback area. I don't want that on my screen, any body know how
  I appreciate any help
  Thank you kindly
  Bry

  Many web pages are those * % # $((^ % # choses.)) There are two things
  You can try. (1) use AdBlock to block the image elements.
  2) go to the web page. After the page loads, mouse to the address bar
  and on the LEFT , click the icon. A window to display information of site should
  developed. Select more information. Now select support. Go through the menu
  and select block on anything with Facebook (and others) as his address.

  I searched for an add-on that will do it, but have not seen a.

• Media Player error "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Hello

  Whenever I try to play something or burn something using Media Player, I get a message.  "A problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.

  Help

  Jason

  No worries, go to the start screen and find the Green store icon.  When you open it will let you know if the update is available.

• Is it possible to block the execution of Javascript from an IP address?

  In accordance with article http://tech.firstpost.com/news-analysis/more-trouble-for-airtel-injects-javascript-code-to-monitor-data-usage-activist-receives-notice-270111.html, my broadband provider is inserting javascript in web pages browsed by me. I would like to block the download and execution of Javascript to this IP address. is it possible to do?

  Have you tried the YesScript extension? It can block scripts by IP (or domain name).

  1. Add YesScript in Firefox.
  2 Add-ons Manager open (Ctrl + Shift + A)
  3. click on Extensions
  4. click the button Options of YesScript
  5. Add the IP address

• Autoruns is blocking the main process Explorer under Windows 7 64-bit

  The latest version of Autoruns (13,40) blocks the main process explore on my 64-bit Windows, when I run it (it shows the entries normally thereafter). It doesn't always, but very often. Usually it's on his first run in a 'session' (i.e. it won't eventually happen if I try to run it more later on; but after a reboot, there is a high probability of it crashing explorer.exe again).

  No work around to do this, other than to wait for the update? It never happened with earlier versions of Autoruns (which is also a wonderful tool).

  Hey Anubis,

  I apologize for the misunderstanding of the question. In this case, I suggest you to check if the same problem occurs on a different user account. This is to check if the problem is caused due to problems specific to the user.

  If the problem is specific to users, then I suggest you to refer to the following article from Microsoft Help to fix the damaged user account.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• I received a message which reads "the product key you entered has been blocked the use of Microsoft. I bought the original Windows 7 Professional SP1. Why do I get this message?

  Hello
  I received a message which reads "the product key you entered has been blocked the use of Microsoft. I bought the original Windows 7 Professional SP1 a year ago. Now, I get this message. What is the reason?

  Where did you bought it?

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to remove the FBI Moneypak Virus / Malware that was blocking the PC requires the payment of 100 Dollars?

  How to remove the FBI Moneypak Virus / Malware that was blocking the PC requires the payment of 100 Dollars?

  Get your updated antivirus program and boot into Safe Mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• New iMac with El Capitan blocks the first export

  We bought this new iMac last year (2015) and it came with El Capitan. In addition, it cannot be demoted to an operating system previous x. driver problems.  So after a few months first started crashing on the Adobe Media Encoder export. There are other bugs, but this one is debilitating. This works if you simply export but if you send to the SOUL, it blocks the two programs. I guess one of the latest Apple updates OS X caused this?

  Hi Garrett:

  I suppose that you change files from QuickTime movies, correct?  What CODEC are you using?  Apple has deprecated QuickTime for executives of Foundation AV.  Thus, the operating system is more multimedia as processing time it used to.  If your question is somehow associated with CODEC, you'll want to convert all your images source H264 or Apple ProRes (you may have noticed that QuickTime Player 10.4 OS x 10.11.5 does this automatically if necessary).

  Maybe try the demo version of CC?  If it works more as you'd expect, it's money well spent.  Also, do you know that you can subscribe to just first Pro CC for $19.99 / month?

  Another solution could be to Adobe Premiere Pro Elements, but also consult iMovie and Final Cut Pro X.  iMovie should already be installed (as I am sure you are aware) and I think that Apple always offers a trial version of FCP X.

  -Warren

• Why DurationElement is not blocking the characters not substituted?

  In OSMF 0.95, I used successfully a DurationElement to implement a framework simple poster, using a composition of series built as follows:

  var posterImageEl: MediaElement =

  mediaFactory.createMediaElement (new URLResource (...));

  durationEl var: MediaElement =

  new DurationElement (0.0001, posterImageEl);

  var videoEl: VideoElement =

  VideoElement (mediaFactory.createMediaElement (new URLResource (...)));

  videoEl.defaultDuration = 31.67;

  var el: SerialElement = new SerialElement();

  (durationEl) el.addChild;

  el.addChild (videoEl);

  With the media player AutoPlay property set to false, after loading, the image of the poster was posted. When the player started playing, the image of the poster disappeared and read video. This is the desired behavior.
  This code has stopped working in OSMF 1.0. After loading, nothing is displayed. The image of the poster is not displayed until the player starts to play.
  I found the cause of the problem. In OSMF 1.0, the class of DurationElement block exposure of all traits not substituted when the element is neither play nor suspended. In particular, it blocks the exhibition of the characteristic of the display object until the item is played. If my image of the poster does not appear until the player starts to play.
  I was able to work around the problem by commenting the line of code in DurationElement which blocks the line of display object. I replaced lines 250 to 259:

  private public static const ALL_OTHER_TRAITS:Vector. < String > = new Vector. < String > ();

  {

  / / Everything but LOAD, SEARCH, PLAY and TIME.

  ALL_OTHER_TRAITS.push (MediaTraitType.AUDIO);

  ALL_OTHER_TRAITS.push (MediaTraitType.BUFFER);

  ALL_OTHER_TRAITS.push (MediaTraitType.DISPLAY_OBJECT);

  ALL_OTHER_TRAITS.push (MediaTraitType.DRM);

  ALL_OTHER_TRAITS.push (MediaTraitType.DVR);

  ALL_OTHER_TRAITS.push (MediaTraitType.DYNAMIC_STREAM);

  }

  with:

  private static const ALL_OTHER_TRAITS:Vector. < String > = new Vector. < String > ();

  {

  Everything except LOAD, SEARCH, PLAY and TIME.

  ALL_OTHER_TRAITS.push (MediaTraitType.audio);

  ALL_OTHER_TRAITS.push (MediaTraitType.buffer);

  ALL_OTHER_TRAITS.push (MediaTraitType.DISPLAY_OBJECT);

  ALL_OTHER_TRAITS.push (MediaTraitType.DRM);

  ALL_OTHER_TRAITS.push (MediaTraitType.DVR);

  ALL_OTHER_TRAITS.push (MediaTraitType.DYNAMIC_STREAM);

  }

  With this change, my code once more to work correctly, and the image of the poster is displayed when loading.
  So my question is: in OSMF 1.0, why DurationElement blocking features not to be overridden when the element is neither game nor paused? My solution is likely to lead to some kind of problem, I'm not aware of that?
  A related question:
  In the ExamplePlayer example, there is a poster frame example that uses a class named PosterFrameElement that extends from ImageElement to add a dash of game, as well as a class named PosterFramePlayTrait that extends from PlayTrait to stop as soon as it is played. Is - that the best way to make posters simple frames? This approach seems to be too complicated compared to my attempt to (perhaps naïve?) simple to use a DurationElement.

  The change you are referring was in response to this bug:

  https://bugs.Adobe.com/jira/browse/FM-719

  Basically, before the fix for FM - 719, the proxiedElement of her DurationElement would expose his features even when the playback head was not the beach of the DurationElement.  This proves to be problematic if her DurationElement was placed in a SerialElement, in what traits would be exposed even when him DurationElement wasn't the current child.  Usually this isn't a problem, but if you have a SerialElement (with a DurationElement) which is in parallel with something longer, then her DurationElement will expose his features, even when its duration is reached, which is unlikely to be an expected result.  So, your solution would solve your problem, but this could introduce problems in the case where the DurationElement is used by other means (no-shows framework).

  The example of ExamplePlayer circumvents the whole issue of the times by mapping the poster in the "play" operation frame display  In general, it is a useful model to use to include pieces isolated from the logic that must be performed immediately (BeaconElement uses the same schema).  I agree that it is more complicated than the direct use of a DurationElement, but it is much less fragile because it does not depend on the calendar somehow.