Block to the power of the device

Similar Questions

• Wireless network blocked by the Device Manager on HP 450 G1

  Hello I'm a newbie. I installed windows 7 on my new 450 Hp g1, and everything works fine except the wifi.

  When I open the hp connection manager it says that wifi is disabled in Device Manager.

  I tried all the drivers from the hp site and none of them work.

  When I open the Device Manager it shows me that he found under the name "other devices" controller network, but it is a small triangle on it and won't let me to install a driver that I found on the hp Web site.

  So please help me and thank you.

  Hello:

  This driver should work...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123191_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Video blocked on the device

  Anyone know why the above message appears on my iPhone 6 s trying to play songs or videos on You Tube?

  The cynical side of suggests me that it's Apple, not subtle way to get you to register to iTunes and it is probably just a matter of time before you do the same thing on OS X - hope I'm wrong and there is a simple solution.

  Any help appreciated - thank you very much.

  YouTube works fine on iOS devices. You use the application? Or should I try discovers via a browser? Do you have any restrictions any enabled on your YouTube account? Which country are you?

• I received spam messages supposed to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

  anti-spam messages expected to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

  Unless you have jailbroken your iOS devices, there are no viruses that can infect them. Sounds like PayPal tries to return the ball.

• Comm port not detected by VISA / MAX after the device power cycle connected

  I have a device communicating via USB virtual comm port. The device and labview program both work very well, most of the time. The program is designed for the automatic connection for the connected equipment. It works perfectly when I unplug and reconnect the USB cable.

  However, if the unit power cycled as the USB cable is connected and the program/vi is running of things go wrong. The device enters a phase of boot loader for a few seconds to the power upward, if labview tries to query the port comm during this phase the comm port is corrupted in some way and is no longer recognized by VISA / NI MAX. However, other programs, hyperterminal, etc device manager can see and communicate with the port when the boot loader is complete. For Labview / NI MAX to see the port I have to physically disconnect the USB cable. The program does not need to be restarted in order to detect the port comm again and, infact, labview is restarted or my compiled program does not solve the problem. Physically disconnect the USB port allows visa / MAX OR see the port is connected.

  It seems to me that there is a problem with VISA where somehow if a device is not correctly identified by VISA during the first attempt it just does not take into account the port until a physical intervention. Is there a way to force VISA to reassess completely all connected comm ports?

  Hello MJanus,

  As far as I know, most of the virtual com ports are not fully supported by VISA so some quirks in its operation are to be expected: http://digital.ni.com/public.nsf/allkb/6E1922B526572CB8862571AA00544057?OpenDocument

  Officially, we do not support the use of com virtual ports, if unfortunately, the feature you have now is probably as good you'll be able to get with this configuration. I know it's not the answer you were hoping to hear and I apologize for the inconvenience, but it is not really possible visa work well with all software virtual com port due to the wide variety of products available.

  Kind regards

• How to solve the error system CDRom - event ID: 7 - "the device, \Device\CdRom0, has a bad block.

  I receive thousands of billions of these error messages in the event viewer.  My CD player broke and he was writer b replaced a regular CD; It can also play DVDs that fine for now. I think that the error may be because the system recognizes the change. However, when I check in the Device Manager it says that the device (the CDRom works.  ??!! Need help!

  Hello

  In most cases, this error is displayed if the CD, DVD or Blu Ray, who is currently in your drive has a bad sector block.

  Method 1: Insert the new CD drive, remove the drive defective media from your drive.

  Method 2: You can also try following the steps from the link.

  http://support.Microsoft.com/kb/314060

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• What does "error code 39, the device, / Device/CdRom0, has an average of bad block and how to fix it?

  Original title: that means 'the device/Device/CdRom0 has bad block averaging, and how to fix?

  I can not access my CD-Rom.  I get an error code 39.  Can you help me?

  Depending on the circumstances that generated the error, it can mean one of several different but related things.

  1. The drive itself is a failure [replace the drive].
  2. The media in the drive is not compatible with the firmware of the drive. [Go to the decision-makers in car's web site and see if there is a firmware update for the drive - or - if a burning operation, try different media].
  3. Lead to problems of software or registry issues [go to the Device Manager and remove the player.] Restart Windows to reinstall. Remove the upper/lower case filters in the registry. Instructions available on the Internet. Do a Bing or Google search].
  4. Anisotropic Pseudo-aleatoires variability in the matrix of the error of the universe [restart Windows and try again].

  Tom Ferguson

• The progress of the installation is blocked on 'the new device is connected now' bar is just reload!

  The progress of the installation is blocked on 'the new device is connected now' bar is just reload! HP laserjet M1132 MFP

  Welcome @HELPMEPLSHSLOL,

  Thank you for your participation in the forums! I see that you are getting the error "new device is now connected" when you try to install the printer software. I'd love to help you.

  If you are using Windows and you're using a USB connection, try the steps in this document: HP Laserjet products - "Device setup has not completed" or the "Unknown device" Message appears in Windows during Installation of USB. If the printer will not be updated of the Manager of devices in the two Solution, make a right click and uninstall the print device. It may be listed as unknown device, USB or Laserjet M1132 print media. Disconnect, then reconnect the USB cable to see if it will continue the installation. If it is not that whatever it is listed for your printer, try another USB port directly on the computer or another USB cable.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected?

  Feel free to click on the 'accept as Solution' and the 'Thumbs Up' If this helped. Please let me know the results. Best regards

• Description: the device, \Device\CdRom0, has a bad block.

  I have McAvee.  A month ago a Trojan plopped o program my screen that said it was Windows and set the virus if I would be a click.  I knew better than to restart...  It ruins your computer of my husband 5 years ago.

  I saw that once again, but since I had a lot of problems.  The INVESTIGATION period didn't recognize me.

  I now have a PC Health Check, which appeared and he had my name on it IP.  Now I see it's been blocked.

  First of all, I couldn't start up right.  I had to choose F1 or F2.  I fixed.

  Online has been a problem.  I think I have two or three different names.

  All my backups do not appear so I can reinstall to an earlier time.  I can not restore from disk.

  Now it says I have a bad block and it is something on my CD.   Description: the device, \Device\CdRom0, has a bad block.

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• "The device, \Device\Harddisk0\DR0, has a bad block" on Dell Vista SP2

  I am repeatedly getting the error "the device, \Device\Harddisk0\DR0, has a bad block." in the event viewer. Recently, I fixed a security problem that prevented me to install windows updates. For this, I ran CHKDSK (see results below), System File Checker, and a complete analysis of the system of McAfee, spybot and Malwarebytes, both in security and the good start. How can I check for errors on my HARD disk?

  --------------------------------------------
  My problem earlier wire: http://social.microsoft.com/Forums/is/genuinevista/thread/60c76236-abd2-4fea-8980-007f424a8eb0

  Although most things seem to work very well, "the device, \Device\Harddisk0\DR0, has a bad block." error still occurs in the event viewer despite the installation of updates/CHKDSK and SFC. Check the results of said disc 'the volume is clean' and the System File Checker showed no errors. Windows resource protection did not find any breach of integrity. Any ideas, what is happening?

  In addition, I don't know if this is related, but a problem with the wireless network connection keeps recurring. "Windows wireless service" is not automatically start during the boot. It must manually be diagnosed and started. He gave the following error message:

  

  In network connections, the IPv4 and IPv6 protocols are verified and most up-to-date driver software is installed. When I tried to update the drivers under devices, I got the following message. "The best driver for your device is already installed. Windows has determined that the driver for your device software is up-to-date.

  -----------------

  New report MGADiag after CHKDSK runs and the installation of the updates.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - F4GJK - KG77H-B9HD2
  The Windows Product Key hash: iJAth4TbScMi8HdcPurlASXdEkw =
  Windows product ID: 89578-OEM-7332157-00204
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {A5A5B929-9AF8-43E5-A311-544A304C88A3} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 114 blocked VLK 2
  Microsoft Office XP Professional with FrontPage - 114 VLK blocked 2
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {A5A5B929-9AF8-43E5-A311-544A304C88A3}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-B9HD289578-OEM-7332157-002042S-1-5-21-3777094449-617660858-91839038Dell Inc.. MM061                           Dell Inc.. A14 20070402000000.000000 + 00056303507018400FE04090409Central Standard Time(GMT-06:00)03DELL M07 114114Microsoft Office XP Professional with FrontPage104iCnywwNW1w4s9ukTIwGMGxyGic =54185-640-0000025-1798914 39476F84C4B4004

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500204-02-1033-6000.0000-1402007
  Installation ID: 007894240565911961931104634943657564676410030663392174
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: B9HD2
  License status: licensed

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEABQABAAEAAQABAAAAAwABAAEAJJRiENrxWFBy8jZ2jNDqTizZupDy9IwU5rIQVqxW9Eg =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL M07
  FACP DELL M07
  HPET DELL M07
  STARTING DELL M07
  MCFG DELL M07
  M07 DELL SLIC
  SSDT PmRef CpuPm

  Hello

  You look at the statistics of SMART to see if the hard drive is a failure.
  http://mikemstech.blogspot.com/2011/12/how-to-detect-failing-hard-drive.html

  If he is not in default, you run chkdsk /f /r to ensure that bad sectors are marked. One way to do this forum works it offline.
  http://mikemstech.blogspot.com/2011/12/how-to-perform-offline-system-integrity.html

  If the disk is failed, you may need to save your data,

  http://mikemstech.blogspot.com/2011/12/how-to-rescue-files-from-damaged-system.html

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Application of CLDC cause the power of the device is turned off.

  Hello

  One met this problem, when the execution of my application and for a while, the device has been turned off automatically. I tested several times, always happens, happens on dperipherique (not on the Simulator), the so I can't debug.

  My application is a SNS client it's network connection (http) and persist the data on the device, of course, the user interface to display the data.

  I think there is a mistake in my application caused the device to be off power (only slide off the battery voltage may start the device again). Anyone have any idea what could cause this?

  Thanks in advance.

  MoWriter

  OK, it seems apparent to the bad battery. Even thoug, it showed there is 1/3 battery, when some app run (not my own application), it would be off.

  If I plug the charger while test, then no power offshore.

• 120W:how RV to block of connected device to intern in the name of the device?

  Hi guys,.

  I use the router, rv 120w

  can I block device connected to the internet through device name?

  for example, the phone Android wil always has "android" in their name of the unit. How can I block the device which has "android" in their device name of connection to the internet?

  Thank you.

  Hello

  Please use our forum

  Hi Louis, my name is Johnnatan and I'm part of the community of support to small businesses. Can´t you block any device by name, but you can block devices using mac address. Go firewall > access control > Mac filtering in this section, you can specify the mac address of devices and block them.

  I hope you find this answer useful,

  "* Please mark the issue as response or write it down so others can benefit from.

  Greetings,

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.

• The device, \Device\Harddisk1\DR1, has a bad block.

  Hello world

  After scanning FAT/FAT32/NTFS partition with the attempt to recover bad sectors, the system marks all free clusters as bad.
  The event log is then filled with error messages "the device, \Device\Harddisk1\DR1, has a bad block.".

  Hard drive is 100% healthy. I bought three weeks ago.  I am 100% sure that there no erros surface, because I tested with Seagate SeaTool and HD tune Pro.

  I tested it on three computers different windows 7 and I still got the same error.
  CnMemory support won't accept as an error, they say that it is the problem of Microsoft Windows 7.

  Here is one video.

  Some info:
  My OS = Windows 7 x 64, with all updates until the 2013.03.29.
  Product name = "CnMemory Spaceloop 3 TB USB 2.0 sata external drive»
  Inside of the box is Seagate ST3000DM001 SATA 3 TB hard drive with 4 k sector.

  Thanks for the help,
  Eduard

  Hi Edward,

  Welcome to the Microsoft Community Forums.

  It seems that the system marks all free clusters as bad and the event log registered as "the device, \Device\Harddisk1\DR1, has a bad block. We will analyze and identify the cause of the problem.

  Perform the steps:

  Method 1:

  Queries or sets the bit of impurity of a volume. When the volume dirty bit, one is set, autochk automatically checks the volume for errors the next time the computer is restarted.

  Syntax-

  fsutil dirty {query | value}
  

  Reference:

  Fsutil dirty

  http://TechNet.Microsoft.com/en-us/library/cc788091.aspx

  I would like to know the output of the following command:

  fsutil fsinfo ntfsinfo

  Method 2:

  You can run Chkdsk from WINRE.

  In order to solve this problem go chkdsk from WinRE (Windows Recovery Environment) mode and search for the issue.

  You can follow these steps to run CHKDSK:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  c. on the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.

  d. click on repair your computer.

  e. click on the Windows 7 installation you want to repair, and then click Next.

  f. click on command prompt.

  At the command prompt, type the following command and press ENTER:

  CHKDSK drive: / p

  CHKDSK drive: / r

  CHKDSK warning:

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information helps. Get back to us if you have more queries about Windows.