Blocked ink jet

My printer is a DeskJet 720C, and my colour, HP1823 cartridge, an unused original, which has been stored for a while and is now out of warranty, it's completely blocks Magenta inkjet.  The Cyan and yellow jets have also blocked when I tried first, but soon, they flowed and printed as usual after a few minutes in a bath of hot water and rubbing alcohol.

A breath of air would help?  I could pull out the cartridge with me the next time one of my tires should be inflated!  Thank you!

Blowing air from an air compressor would probably damage the print head.  You could try the print head to an inch of very hot water for a few minutes, but most likely you will just need a new cartridge #23.

Tags: HP Printers

Similar Questions

  • HP Envy 4500: HP Envy 4500 Ink Jet works with both cartridges are black?

    Then I load two black cartridges in this ink jet printer and do it print? (after that I tell it to do black and white only).

    Hello

    Unfortunately no, printer will check the cartridge slot to ink three colors and it stops if it does not find (even physically there is something).

    Kind regards.

  • How can I remove ink jets if my all-in-one is broken and does not light?

    My hp officejet pro8600 than n911g was struck by lightning.  It will turn is no longer.  I used a new cord without result.  I need to remove the ink jets, I recently installed.  How can I access them without power?

    It is possible that the printer was not fried, but the power may need to be reset.  Watch this video for sure:

    http://h20621.www2.HP.com/video-gallery/us/en/customer-care/1245172417001/fixing-your-HP-printer-when-it-wont-turn-on-or-respond/video/

    If the printer is really fried, remove the front panel to access the cartridge Board and force it to the left.  Since you printer is not repairable, you lose nothing.

  • I just bought a new HP 6500 Ink Jet and it WILL NOT work cable OR wireless.

    I tried everything possible to connect with the USB cord or via my wireless connection.  I'm frustrated enough who

    the so-called wireless printer is such a pain to implement.

    I am running Windows XP and have the HP 6500 Ink Jet printer.  Basically says that it cannot find the printer.

    IrishSpirit

    Hi irishspirit,

    Try the procedure described in the following document.

    http://support.HP.com/us-en/document/c02430792

  • Ink Jet blocked and do not print

    HP Photosmart Plus e - all in a series of B210.

    Black ink will not print.  How can I clean the hea.

    Hello

    Please see the Page 32 of HP User Guide *:

    http://h10032.www1.hp.com/ctg/Manual/c02456532.pdf .

    (direct link to PDF download)

    for information on cleaning the print heads.

    * I couldn't find B210a B210 model.

  • CE251A, CE253A CE250A: Laser ink jet cartridges

    Sifting through my late father, I came across these 3 laser jet ink cartridges. My mother no longer has the printer those cartridges go. Is it possible that we can send them to you for a partial refund. Of course we have no receipt, and they are at least 4 to 6 months old. Thank you for your attention to this issue.

    Let me first off the coast with I'm a volunteer and do not work by HP but here's my thoughts.

    First of all, let me say I'm sorry to hear about the loss of your father, my father died many years ago.

    Without a receipt, you don't know if your dad bought these at HP or from another source.

    If you can determine where they were bought you a chance at returning to a kind of credit, or even possibly a refund.

    If they were paid for with a credit card, you may be able to find the purchase on a credit card bill.

    If all else fails you could go to an eBay dealer and at least get a bit of money for them.

    The lines that follow this sentence are automatic and appear on every post that I do, they may seem a little insensitive to this particular post but it's just something that is set up to happen every time I reply to someone so I don't have to type them again and again.

  • T120: Will be this Ink Jet Dry Out?

    I'm looking to replace my designJet 450 c late which lasted about 14 years. My biggest complaint with this printer was that after sometimes go months without printing, the nozzles on the ink cartridges would be dry. I was able to revive the black ink cartridge by rubbing its nozzles with isopropyl alcohol on a Q-Tip, but color cartridges were less forgiving and had to be replaced long before their ink have been spent. I finally gave up on using color printing.

    I would like a new printer 24 inch large format color, mainly used for architectural drawings, and the T120 is in my budget. The question is, is ink technology and feel similar to that of the 450 HP. and so give me the same problems of drying out or have improved that will give me years of carefree color printing without ink with clogged nozzles?

    To be honest continuous months without printing is never a good idea with any inkjet printer even high-end.  The new Designjet printers uses a different method for the delivery of the ink in your old c of 450.  On your old printer, the ink and the print heads are one unit if the ink ran out you need to replace or if the printhead part went wrong, you need to replace.  Plotters of today have separate and distinct from the printheads ink tanks.  They use a set of tube between the two to provide the necessary ink.  The print heads contain little ink since it must flow from the top down and is powered by the tanks and the tubes where the ink is under pressure.  Also, service stations where parks of the carriage house when not not used are made better and cap the print heads better to provide a better seal to avoid drying out.  Usually, I recommend to my clients to print a flush at least once every 2 weeks.  May be a small article, but it keeps the cool heads and prevents the clogging in the long term.  On most modern conspirators, I see today, printing heads last 2 to 5 years without problem.  Also, as far as I saw never ink tanks go wrong.  On some models, the inks expire, but most allow for continuous printing with inks has expired.  Most recent plotters also have a cleaning routine that cleans the print heads when the obstruction has occurred.  Hope this helps with your decision.

  • How to clean on deskjet f4500 ink jet printers? two new pairs of cartridges = washed out colors. No manual.

    I replaced the cartridges in my HP Deskjet F4500 printer before they were empty, because the print quality was poor.  It got worse until there was no being black doesn't print at all, only pale colors. I tried another new pair of cartridges in which case it is the ink, but it's all the same.

    The assistance program HP on my computer tells me that I should clean the inkjet - to consult the manual that came with the printer.  I can't find. He lost.

    I'm lost!

    Waiting for legal document!

    Help, please.

    Hello BethWales

    You can find the user manual at the link below.

    DeskJet F4500 manual

    Also try the print quality article as well. It can help solve the problem.

  • Inkjet 3630: HELP WITH the ALL IN ONE ink JET PRINTER 3630

    MY INKJET 3630 don't WILL NOT MOVE CARRIAGE ON PRINTER to ENABLE ME to CHANGE of INK CARTRIDGES so OBVIOUSLY WILL NOT PRINT or SCAN A DOCUMENT can NOT SEE or FIND ANY OBSTRUCTIONS AFFECTING the PRINTER - CAN someone please HELP me I AM at a LOSS WHAT to DO

    Hi @She1,

    Thank you for joining the HP Forums!

    I noticed your post that your printer HP 3630 will not move to the transport of ink. I'm happy to help you!

    Please try the steps in this jam of transport guide, a "E3" display of the error (jam carriage)and let me know what happens!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this guide helps!

  • HP 940XL ink jet: black discoloration 940XL ink jet ink

    HP black cartridge real pretty new installed.  Disappeared in black ink in some parts of the half top of page, worse about it.  Only happens on every page, about 40%.  Printed test sheet, cleaned and aligned printheads - no improvement.

    -Very well, make sure first that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document should help you solving print quality problems with your printer.

    If after following the above, you still have questions, the printer must be replaced. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

    Please let me know the results after following the above. If you are able to improve the quality, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • 920XL black HP ink Jet cartridge failure model...

    It's simply turn the orange cover on the outlet of ink and he started shooting like crazy!  The foam as small insert wasn't there when it was deleted, there was nothing to stop him to dump.  Until when should I receive my check for a new Lane leather sofa?

    I have forwarded your message to the right people for their review. You should hear from someone bit via private Message on this forum.

  • Software problem J610a 3050 ink jet

    I lost the printer maintence fuction (check the ink level, head cleaning, etc.) but the other functions of the software (preferences, see what printining, customize your printer) ok. I installed the CD and selected repair but has not set. Should I uninstall and reinstall the software?

    CamaraHello and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have lost your software maintenance feature. I want to help you with this.

    I suggest to download and run the HP print and Scan doctor.

    If this does not work I would uninstall the printer software and reinstall the HP Deskjet 3050 all-in-One Printer - drivers J610a.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • 5530:5530 ink jet won't print in black

    Will not print scanner and computer. It will display a page of alignment with black on it. Clean the contacts. It has a single page and that's it. Not performed since Word doc. tried in the text doc no chance. This unit has been renovated in HP.  Have not had any luck with HP printers. This one got in the hope that they improve.

    Hello!
    Welcome to the HP Forums, I hope that you are @Weisse,

    I saw your post on the black ink, don't want no printing of your 5530 and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

    Color or black ink does not print

    If you have trouble, let me know and I'll do my best to help.

    Hit the "accept as Solution" if we reached a solution and the "thumbs up".

    to say thank you for my help.

    Have a wonderful day

    HP technical support are available by clicking on the following link:

    http://h22207.www2.HP.com/us-en/?openCLC=true

    (1) once will open the support page please select the country in which you are

    located. Then enter your model of HP on the right number.

    (2) then choose the 'Contact Support' tab at the top and scroll down to the

    bottom of the page "HP Support - Contact" to fill in the form provided

    your contact information.

    (3) Once finished, click the "Show Options" at the bottom right.

    (4) Finally, scroll to the bottom of the page and select ' Get phone

    number. "A file number and telephone number will now fill for you.

  • Cannot print anything in color, except for the ink-jet printer test page

    All prints black and white with the exception of when I print a test page for the printer itself (Dell v313).  Had no problems with it.  I called Dell and they want $129 to 'fix' my Windows problem.  No errors.  Have full ink cartridges.  Also recently installed drivers and firmware for the printer, thinking that might solve the problem.

    Hi Monte,

    Did you recent hardware or changes to the software of the system?

    Method 1:

    You can view the following items from Dell support and check if help.

    Printer does not recognize the ink cartridge

    Troubleshooting of printhead Dell V313w AIO, V515w, V715w, P513w and printers P713W

    Method 2:

    Alternatively, you can try to uninstall and reinstall the printer drivers and check.

    a. Click Start. In the start search box type "devmgmt.msc", and then press ENTER.

    b. expand the "Printer", double-click the entry for the device.

    c. click on the "Driver" tab, click "Uninstall".

    d. Click Start. In the start search box type "appwiz.cpl", and then press ENTER.

    e. remove all entries related to the network card.

    You can check the Dell support to address following link and install the latest version of the drivers.

    Dell V313 AIO inkjet printer

    Hope this information is useful.

  • I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

    Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

    Hello

    as the poblem started when you changed the ink cartridge contact Lexmark

    http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

Maybe you are looking for

  • Contact ID is working but saying it's the wrong finger

    Hello! I need your help because I was in a meeting and I turned the my iPhone 6 s broad so that you have to press the Tower of button for a long time to restart. Thus ended the meeting and I went home, but I forgot my phone it was quite late so I wan

  • Satellite Pro C660D - screen does not turn

    I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop. She lights up on the front (and I can rotate the block number power sp that the keyboard works).Any ideas?

  • Portege R700 - Touch Pad, ecoUtility and presentation of the key does not

    Hello I got a Portege R700 with Windows 7 64 bit.This machine starts very slowly after the log in user mode only.The system is waiting for 1 to 2 Minutes before you can work. In administrator mode erverything is fine and fast. Thus our directors thou

  • Question about the functionality of years on Skype?

    So I received messages from my people on my contact list when it was his birthday and I was wondering if they would receive a message whenever it was my birthday. The only thing is that I have the birthday party on my blank profile. When I signed up

  • Equium A200-1V0 starts

    I left my laptop computer for a bit, and when I came back it froze.So I restarted, but it wouldn't boot.So I tried to fix it, but I thought that "problem could not be resolved" or "If the problem is resolved, the computer should work, if the problem