5530:5530 ink jet won't print in black

Similar Questions

• HP 3522 won't print in black

  HP 3522 won't print in black - all new cartridges - replaced black for printing Sun and, now, not at all - has retried original cartridge - all basket original hp.  Tried every hp online help - none worked - out warrentry as on March this year.

  Thanks for the reply nc4159!

  I will send you a private message to explain what I would like to then if you are unsure how to check your messages on the forum this post, has instructions.

• Replace the empty ink cartride color to print in black and white on C7280

  Photosmart C7280 printer gets the error message O > c18a0306 and cannot print.  Study found more than clear cyan ink is empty (which in itself is incredible that very rarely colorprint). As I only need bo black and white printing is there a way to bypass this error message so I can continue printing in black & white?

  I don't think so.  The C7280 has permanent print heads which are not replaceable.  To avoid irreversible damage to the print heads, the pritner requires in all colors (and black) ink for printing.

  The here document includes information about using ink in HP (and other manufacturers) inkjet printers.  In the language of this document, the C7280 is an IIC printer.

• OfficeJet 6500 E709a won't print in black

  All,

  Printer operations were normal for the last year, until today.  Printer has stopped printing in black; test document printed in red, yellow and blue, but black only is not the book.

  Had a spare cartridge, tried.  No change.

  Tried the function to "clean the print head" in the Toolbox, and the message is "basic features drivers seem to be missing or nor configured '."

  Next message says "off print driver, click 'next' to install.  I clicked on "next" and get a repeat of the first message "... basic features. ».

  Not tried allows re - install printer but 2 way comm, and the installation wizard would allow me to continue.

  It is on a 64-bit Windows 7 system, more than one year old [just out of warranty...!] and has been flawless so far.

  Any thoughts?

  Thank you very much!

  See if this utility will help question:

  http://support.HP.com/us-en/document/c02762273

• CP1215 won't print in black

  My HP Laserjet CP1215 print not black (even in black and white mode).  The cartridge is fairly recent and has left more than 1,000 pages.  I'm unable to print documents.  The leaves come out blank or they will show as the colorful items.  It's something new.  FYI - my color cartridges are low, but still have pages left.

  Thanks for any help!

  I hope you do well welcome to the forum.

  GO HERE and upgrade to the latest firmeware if not already done. Click here and select your operating system e.g. Win 7

  I'm not positive that this printer supports this tool but let see if it is the case. GO HERE  Assuming you are using windows XP or later)

  Hope this helps and please let me know if I can help you further;

  RobertoR

• In the printer ink cartridge does not print in black on paper data

  The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h

  Operating system: Windows 7 64-bit

  Error message: no

  Changes made to your system until the problem occurred: no

  I went to copy the data on my printer and noticed the empty ink was passed out.  Changed the black print cartridge
  and now I can't print anything that has a black colour.  Replaced by a new black ink cartridge and

  Unable to copy or print everything about the color white.  Do you have all the guests on troubleshooting

  with no luck.

  Y at - it something else that can be done?  Would appreciate the help.

  Thank you

  Hello Alex,.

  You can try the following troubleshooting link:

  http://support.HP.com/us-en/document/c02914910

  In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.

  Hope this helps.

• Depleted ink color, want to print in black only

  Hello

  We have a HP Officejet Pro 8500 A910 printer all in one, and it happened for us several times.  When we have run out of color ink, but have a full black cartridge installed, the HP software allow to print text in black ink only documents.  It's very frustrating, because there is a setting in the "set preferences" dialog box that appears to allow such use, but apparently it is misleading.  Is there some kind of special 'switch' that I need to return order to stop don't not productivity when I don't have the money or time to buy unnecessary colors?

  Thank you, Bill

  Hello

  You have to buy color inks. I have test another days: printer still print but very slow and can get blank pages several times.

  Kind regards.

• 4615 Deskjet ink advantage will not print in black

  Hello

  I replaced the black cartridge about a week ago and it worked fine until today.  The printer indicates that the cartridge is full. Today used out in the middle of a print, and will not return. I tried all the procedures of cleaning recommended by HP without success. I also checked that the vent is not blocked.

  Operating system: Win 7, 32 bit

  Warranty expired dec 2013

  Suggestions, how can I would be welcome

  Hi arifle,

  Take a look at the troubleshooting document following the link:

  OfficeJet 4610 / 4620:

  http://support.HP.com/us-en/document/c03944809

  I suggest you read solution 3 downwards.  You have already entered through solutions 1 & 2.

  If none of this works, then it would probably be a good idea to contact the HP support in your region.  Here is a link to the contact numbers:

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  I hope this helps.

• 4620 OfficeJet won't print in black.

  I have exactly the same problem and have performed all tests without success. When I installed a new cartridge, it has been recognized as a cartridge HP & full poster on the ink estimator, but nothing!

  @SAMBENNETT

  I advise to call HP telephone support on this matter, because you might need a replacement

  Phone numbers

  http:// Welcome.HP.com/country/US/en/wwcontact_us.html

• HP Officejet 6500 Wireless print with black ink

  HP Officejet Wireless 6500 won't print with black ink. This printer as worked perfectly for years. Now, all of a sudden, he leaves by using black ink. All other colors are working very well. Any ideas?

  I tried several cleanings and reset by pressing on # and 3 when turning the power on. Nothing works, but the ink levels are declining due to all the cleanings trying to get this thing to work.

  I have it!

  I have searched all over the internet for a solution to this problem. Some people have the right idea, but not how to implement it.

  Problem: Black ink doesn't print all colors print but not

  Reason: for black print head is clogged.

  Implementation of solution:

  Set 920 ink jet cartridges in cartridge print head which is held in place by small arm on the right side of the ink cartridges.

  1. remove all the ink cartridges. I didn't want them to dry, so I wrapped them in plastic wrap.

  2. lift the arm and remove the print head cartridge.

  3 rinse the WHOLE print HEAD under a stream of water. I know it sounds crazy, but it will work. I thought it was best to rinse all the (not only black) because if I did not then the ink left any color would dry up and clog in any case!

  4. I leave the printhead to dry for about an hour, BUT IT DOES NOT WORK. When I handed the printhead my 6500 gave me an error message that it could not find the head of printing or something like that. I thought I ruined which was the risk I was willing to take. I went online and searched for a replacement at low prices. I immediately ordered it. But I have excluded the old printhead to dry just in case it is water which made it unnecessary.

  5. four days later I received a new printhead. Before I opened the package I tried the old an new AND IT WORKED! First, I installed the old print head cartridge, then each of the inks. After having done that, the 6500 did the rest. He went on a very long print head cleaning and alignment. He gave me the message "Please wait. Printer preparation occurring. »

  6. when the cleaning and alignment end it automatically prints a test page. It didn't look perfect the first time, but it was close. The message I got was, 'success. Alignment with success. Recycle or discard the printed page. Press Ok to continue. "The problem was that the ink cartridges were emptied of this whole process, even though they had about half of the ink when I removed them left. I changed the ink cartridges and did a cleaning and a level 2 cleaning and alignment. It worked!

  7. because I could not return the new printhead that I am now in case of failure of the print head for another reason.

  I don't know how long it will take to dry print head after rinsing but I know works of 4 days. Perhaps a few days would have been sufficient. If someone does and less time please let others know here.

  If you don't have success using my method, at least you know it will solve a new printhead. I paid about $35 for a new.

  Good luck!!

• HP 6510 don't print in black

  Hello

  I just changed my black ink cartridge and my printer won't print with black ink. Cartridge changed for a new one, but nothing works.

  Reset the printer, aligning, cleaning, nozzle check, think I have tried almost everything except to buy a new one.

  You have a final option before you buy a Samsung / Canon / Epson?

  Hi @RenaudD

  Please do not disassemble the printer, I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Why can I not print in black and white only?

  Why is the HP Officejet Pro 8600 more unable to print black and white only if the black cartridge is not empty?

  What I mean is that I went into the settings to set the printer to print black and white only but also print text in black only.  Yet, I HAVE to replace the cyan, magenta and yellow cartridges, because they are exhausted.  Nothing to do with black printing, whereas a SEPARATE black cartridge is and is always full should cyan, magenta and yellow ink?

  I'm aggravated about how the driver for this printer is designed TO FORCE me to buy cartridges not black when I deliberately put printing be BLACK ONLY.  I'm unable to move forward with my impression.  This is considered to be a show-stopper and is unacceptable as the setting that I've assigned and exhausted cartridges message contradict each other.  If the adjustment is made for print in black and white only including text, then print black and white, because I know that the black ink is still available.

  Take into consideration that printing may take place at any time.  Not being able to use black as my other color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop.  I can't go forward until the store open.  Wal-Mart isn't always an option.   It's lost time.

  The inability to switch to self-supply to meet to use the black cartridge is only a waste of time.

  Call it for what it is, a form of ransom. HP wants me to spend the money on the color cartridges that have nothing to do with black and white printing.   When I am ready to print in color, which should be a time of my choosing.

  Either way, the form, which I am trying to print is black and white only.  No color is on this form.  It is foolish to force printing in color to a black and white document.

  Hello

  Specially protect the print heads printers much NEED other inks even they only print in black. During the warm-up process, printers require all inks so they can stop before we continue. Some printers allow printing (especially those who have the ink tank three colors), but they can print at a speed of snail baby.

  Kind regards.

• Want 5530: Printer does not print in black ink

  I recently updated my HP 8.1 Windows of Windows 10 laptop.  I have the same type of printer (Envy 5530) installed at my other House and updated my desktop computer for Windows 10 and had no problem with printing, but now I'm with the laptop.  I try to print documents now and the printer does not print anything using black ink.  Color ink prints, black ink just not. The two jets of ink are filled.  I did all the "try these patches" suggested Windows and HP Print doctor.  I uninstalled and reinstalled the printer twice.  I rebooted the computer several times.  I'm no tech person by any means and have no one to help me or ask what else to do. Can someone help me understand this please?  Thank you!

  Hi @KKLfromIA,

  Welcome to the HP Forums!

  I understand that you can not print in black with your printer to HP Envy 5530 on Windows 10. And I'm happy to help you!

  You use genuine HP cartridges or refills?

  One of your ink cartridges, low or empty?

  In the meantime, try the following solutions:

  Solution: remove the black print cartridge

• HP Envy 5530 won't print computer this weekend.

  HP Envy 5530 won't print computer this weekend.  I turned off and unplugged.  Bought on 25/10/13.  It has happened, but this time cannot operate.  Impressions of my iPad.

  Thanks for getting back to me SammyAmazon!

  I am happy to know that you can print again!

  Remember to mark our thread here as "accept as Solution" since the problem seems to be resolved.

  Have a great weekend

• HP envy 5530 - printing in black ink only

  How to print in black and white only on my Ipad? I use air print and print it in color

  Hi @YW1,

  Welcome to the Forums of HP's Support. I understand you want to learn how to print in black and white on your iPad.

  AirPrint is currently a minimum printing options are available to be changed. If you wish to have more show options what is available please download and install the HP ePrint Mobile's application. I've included the HP ePrint Mobile App FAQ document for reference.

  Please let me know how it goes.