"Blocked Pages.

Similar Questions

• Customize the Web content filtering block Page

  Does anyone how and where I can customize the block page on a SonicWall NSA 240 of web content filtering? Also, I can't using the details I thought I configured, what do you advise for this problem also?

  Kind regards

  RocknRollTim

  You can customize the block page CFS in respect of Security Services > Content Filter > scroll down to bottom & customize it under 'block the Web page to display when '.

• Firesight URL filtering - shows do not block page for https sites

  Hi all

  I configured to block certain pages of URL filtering. I configured the decrypting ssl as well. But I noticed that when a website https is blocked firesight does not display the block page. When the Web http site is blocked the block page shows correctly. Is this a limitation in the firesight?. The firesight version is 6.0.

  Thanks in advance

  Ophelia

  SSL web filtering occurs with the common name of the server certificate. When the end user opens any SSL-based Web site. End system not the TCP connection with the server and then SSL handshake begins.

  The probe monitors the SSL handshake and when the server sends the server certificate. Sensor corresponds to the common name of the certificate with the access rule (rules based on a URL). If it matches the sensor blocks the connection during the SSL handshake. Therefore, the connection has been blocked before reaching the application protocol (HTTP GET request) so that the system doesn't send any response page.

  The sensor not the resignation certificate (SSL decryption) when it receives the certificate of the server, but at the same time / name common package (server certificate) corresponds to the access rule (URL blocking) to block the connection. Therefore, blocking connection has occurred then the SSL decryption is not the case. In this way, the system can save some resources (CPU / memory).

  Kind regards

  Sunil Kumar

  Rate if that helps!

• Level the vs locking level field block page

  In my application, I have a page with fields and a button.

  1. by requirement, I need to lock each present field on this page. However, button should get not locked because it has script written on the click event to unlock the fields present on the same page.

  To lock all fields: Form.Page.access = 'protected' - it works fine

  Now for the release button: Form.Page.OverRide.access = ""; -it does not work. Always locked button. I printed out the status of the button on the console and it shows as open.

  2. If I try to lock each field individually, some fields are not getting locked and can still be modified. I checked the written code is correct.

  My second question is how to lock all fields without blocking a button on the same footer?

  Thank you, Jono and Melrose.

  I could solve this problem by placing all other fields on a subform and the substitution buttonn alone on an another subform and only the first lock.

• Is it possible to block pages web spesific?

  No details of which I guess...

  The following link will guide you through:

  Block / unblock websites with parental control on Firefox

• Is "Web reported fake! This web page to the 69.73.182.154 has been reported as a false web and has been blocked based on your security preferences' legitimate?

  Yesterday, my wife received an email from 'Unauthorized Communication on access' so-called [email protected], who requested that the attached document fill in name, address, SSN, DoB, ATM card and PIN, etc.
  Thinking that it is legitimate that it fills in and clicking 'Continue', how the screen "Reported false Web!" appeared with the URL in the line of the previous question. When you click on "why has this blocked page" she took to Support Mozilla page titled how does integrated, phishing and Malware Protection works?
  The reported fake Web legitimately from you message and was the content of the form she has blocked or destroyed, or is now at risk of identity theft? In other words, is the part of "reported Web fake" page of the author of the phishing scam, or is his information?

  There is a good chance that the form was never sent (I don't know how the form was sent because I don't have the email address so I can't promise that it has not been sent) and so your information is secure, but you must always take steps to ensure that you protect your identity immediately , placer place notice of fraud on your credit and debit cards, change your passwords online, pine, etc. Remember that your bank will never e-mail you asking for your information, they have it all already, why do need to check? These emails are always scams.

• Click Ad blocks on my site by accident and now they are without pictures, videos or the basic theme, just an outline of text pages.

  When using my Firefox browser, I opened my site (www.selfconfidenceforum.com). On the homepage of the Google Adsense box, I hit a little "AdBlock" icon by mistake. The google ad disappeared. I right click and find an AdBlock button, but when it opened I could not find a way to turn it off. When I went back to my site in Firefos, all images, including the header, videos, etc. disappeared. That shows a preview of the text of the pages & content. How can I fix it? PS When I open the same Web site in another browser, it was fine. All images and theme shows things as usual.

  Right click on the ABP icon and choose 'open blockable items '. The blocked page items will be printed in red. You can unlock an element by right-clicking on it and choosing the appropriate option.

• Block the Page - Asa Firepower

  Hello world

  Now I m working with an ASA 5506 X and Sourcefire module, by now it s works well, but I have a problem with the calibrated block page (Https response) only works with Internet Explorer and the other browser does, and Don t show also the http response when the page is running with securty (HTTPS).

  URL filtering policies are working correctly, the problem is that I can't see the block page that I customized with browsers like Mozilla or Chrome and when the page uses port 443.

  No one knows why this happens?

  Thanks for reading. :)

  Hello

  For Https Web sites, we will not receive a message block, it is because https with encrypted data and fire power module does not have the ability to decipher the encrypted traffic. Only the material fire power and now the latest version 6.0 Drambuie devices will have the ability to decrypt SSL traffic.

  Only FirePOWER series-3 device support SSL at the moment so, this is the expected behavior.

  Kind regards

  Aastha

  Rate if this can help!

• Timer page and block

  I am current working on a project to review system and I'm trying to implement a timer for any question and I want to block page refresh, because it would change the content of the element in question. Any ideas?

  Visit the forum... There are SEVERAL threads on this...

  Examples:

  http://forums.Oracle.com/forums/search.jspa?threadID=&q=question+timer&objid=f137&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you

  Tony Miller
  Webster, TX

  Never give up dreams!
  JMS

  If you answer this question, please mark the thread as closed and give points where won...

• Latest Firefox block reported attack sites...

  Hi all, in the latest version of Firefox, the option "firefox block reported attack sites" is enabled by default. My question is, mettle is listed as one of these Web sites. I use mettle to allow people to download photos from events that I cover without having to affect the speed of my site... granted some might use mettle for wrong reasons, but not all.
  So, what can I do? Not all visitors to my website would have the knowledge to turn this setting off...

  Block page has been enabled by default for years, but blocking download has been added more recently, perhaps around early March when there was a wave of messages on it.

  The list of bad sites come from secure Google service. Downloads of Firefox updated lists of blocking at regular intervals. It is questionable to block a whole file, hosting site based on a bad user, so I hope that the next iteration of the data file removes the block; We are all at the mercy of the data on it.

  To check where your date file has been updated, you can watch here (type or paste into the start menu search box and press enter or use the Windows Run dialog box):

  %LOCALAPPDATA%\Mozilla\Firefox\Profiles
  

  It's the cache and temporary files folder corresponding to your active profile folder. Double-click your most recently updated and secure profile folder. Normally, you will find that the files have been updated within the last day.

• Blocked by some web sites - why?

  I noticed a strange behavior in recent days.
  This morning, I am trying to go to stonehouseinn.com. When I enter it, it starts to load the home page, then turn away to a blocked page:
  http://stonehouseinn.com/blocks/page_list/view.CSS?v=744eb82069f594b425d23f63d7bc2250

  Another site (in the same area of tourism) did the same thing.

  Interestingly, this does NOT happen on the computer of my wife on the same local network, also run firefox.

  Assuming that they did not like my no no track or other security settings, I have disabled them - same behavior. Re-activated security settings.

  In another anomaly, when I go to e.triblive.com (local newspaper web player), I was diverted to a Yahoo Search page:
  http://us.yhs4.search.Yahoo.com/YHS/ErrorHandler?hspart=gt & hsimp = yhse-gt & q=http%3A%2F%2Fe.triblive.com%2Fjquery.captcha.js & type = 827316

  Any help would be appreciated.
  Jim
  [email protected]

  First try to disable your add-on, that are only two add-on for Tidy 1.0 network and disconnect?

  Try disabling the
  Seedisable or remove modules

  In addition,
  Your list of details of the system shows that you have a user.js file in the profile folder to initialize some preferences at each start of Firefox.

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here. You can check its contents with a text editor if you do not create this file yourself.

  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file, so set of preferences via user.js can be changed temporarily for the current session.

  • http://KB.mozillazine.org/Preferences_not_saved

  You can rename or delete the prefs.js file and numbered possible prefs-# .js and the file user.js to reset all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder:

  Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Note that the folder "Application Data" in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• MSN account has been blocked, and all valid for get info to reset attempts are not received to my alternate e-mail address

  Hello - I use abrand new account just to register for this problem. My account * address email is removed from the privacy * was blocked - I filled out a form of reset for my alternate e-mail address, but nothing up there. I then retried and and filled out a background form thanks to the regulator blocked to prove my payment options and email of recent information to prove who I am. Still not reset info received to the alternative e-mail address. Today, I tried again and there is no control of the blocked page but my password does not work and I do not have information received to the alternative e-mail address. I understand that you can have some resets sent to mobiles but I can't this configuration. Finally, I asked a password reset today and no still no reception to alt address. Help! You will need to get mail NOW. I pay for this service, but there is no support and I didn't ask for this remove - what number should I call to get this sorted out instantly or, Alternatively, to close the account that I do not pay for a service that does not work... Report as abuse

  This is not an appropriate forum to do so, however...  You want to see what I'm about to post to make sure that you have not missed something...

  You talk directly to Microsoft here.  It is - for the most part - a peer-to-peer forum (those, like you, are simply users of Microsoft products).

  You could go through this article - make sure you have done everything...
  http://www.itechwhiz.com/2011/04/account-recovery-reset-Windows-Live.html

  And someone is probably going to put these links here also:
  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

• Number of the page of search results

  Hello

  Can anyone help me please with a problem that has me pulling my hair right now. I googled extensively and had no joy. My Indesign Scripting experience is pretty weak, but I spend a lot of time in VBA and PHP then coding and objects are not foreign to me.

  I'm modyfing the existing (and excellent) script to cover my needs. I need to find each instance of a paragraph style, then use the page number and the text to build a content page later. The original script achieved via an index, but it is not convinient for me in this case that I need to first make a change more.

  I successfully converted the original script to search all text that has a special paragraph on her style. I'm so succsefully entering the text. I just can't do, is to enter the number of the search result page. I understand that I probably need to look at the parent page of tags, but I don't see how. If there is no help, the paragraph style is likely to be nested within two or three tags embedded in a text box.

  Any help would be greatly appreciated.

  JavaScript document

  /*

  Based on the "marking of the character style index words" of Josha Hubbers who was based on the "Marking of the color index words" script by Thomas Silkjær

  http://indesigning.net/

  */

  var result_words_found = 0;

  var curr_document = 0;

  var my_document = app.documents.item (curr_document);

  Create a list of samples

  var list_of_paraStyles = my_document.paragraphStyles.everyItem () .name;

  var list_of_paraStyles is my_document.paragraphStyleGroups.item("Book").paragraphStyles.everyItem () .name;.

  var list_of_paraStyles is my_document. ParagraphStyleGroup.allParagraphStyles)

  var yesNoDialog = ['Yes', 'No'];

  That the dialog box to select the style of char at index

  var paraStyle_dialog = app.dialogs.add ({name: "Generate index of paragraph style"});

  {with (paraStyle_dialog.dialogColumns.Add ())}

  {with (borderPanels.Add ())}

  {with (dialogRows.Add ())}

  {with (dialogColumns.Add ())}

  staticTexts.add ({staticLabel: "choose the style of paragraph :"});})

  }

  {with (dialogColumns.Add ())}

  var selected_paraStyle = dropdowns.add ({stringList:list_of_paraStyles, selectedIndex:0});})

  }

  }

  {with (dialogRows.Add ())}

  {with (dialogColumns.Add ())}

  staticTexts.add ({staticLabel: "search all documents opened :"});})

  }

  {with (dialogColumns.Add ())}

  var selected_search_span = dropdowns.add ({stringList:yesNoDialog, selectedIndex:1});})

  }

  }

  }

  }

  catch the Cancel button

  var doSearch = paraStyle_dialog.show ();

  If selected_search_span.selectedIndex == 0 then search for 'all documents '.

  other searches only active document.

  an active document is element 0 of the array app.documents.item

  If {(doSearch)

  Set the options to search text to find all words with the selected character style

  app.findChangeTextOptions.caseSensitive = false;

  app.findChangeTextOptions.wholeWord = false;

  app.findChangeTextOptions.includeFootnotes = false;

  app.findChangeTextOptions.includeHiddenLayers = false;

  app.findChangeTextOptions.includeLockedLayersForFind = false;

  app.findChangeTextOptions.includeLockedStoriesForFind = false;

  app.findChangeTextOptions.includeMasterPages = false;

  app.findTextPreferences = NothingEnum.nothing;

  app.findTextPreferences.appliedParagraphStyle = my_document.paragraphStyleGroups.item("Book").paragraphStyles.item (selected_paraStyle.sel ectedIndex);

  Browse open documents to index all the...

  {}

  my_document = app.documents.item (curr_document);

  Search in the document

  var found_words = my_document.findText ();

  Make index

  var my_contents

  check if words are found

  If (found_words.length > 0) {}

  To loop through the paragraphs, create a list of words and mark them as index words

  myCounter = found_words.length - 1;

  {}

  var found_word = found_words [myCounter];

  var my_topic_name = found_word.contents;

  check if the subject is not empty

  If (my_topic_name.length > 1) {}

  items have been found

  result_words_found += 1;

  / / Need to retrieve the page number as a variable here.

  Create the page reference

  my_topic.pageReferences.Add (found_word);

  }

  -myCounter;

  } While (myCounter > = 0);

  }

  remove unused topics from the index, just for cleaning

  break if a single active document is extended search

  If (selected_search_span.selectedIndex == 1) {}

  break;

  }

  curr_document += 1;

  } While (curr_document < app.documents.count ());

  display the dialog result...

  If (result_words_found == 0) {}

  Nothing found alert

  Alert ("nothing has been found, try again...");

  } else {}

  Alert ("made of indexing! \n"+ result_words_found +" items found.\n\nNow choose \"Generate index\"in the Panel Index to update your index.")" ;

  }

  }

  The number of the page on which there is a text is the name of the parent of the text of the parent text block page (if you know what I mean):

  var found_words = my_document.findText ();

  $.writeln (found_words [0] .parentTextFrames [0].parentPage.name);

  Is CS5 and later versions. In CS4, it's a little different, I forgot the details.

  Peter

• The page flow stopped

  I was editing a chapter for three days with no problems, unexpectedly, blocked page output and I can't get the paragraphs to advance to the next page. I tried the following things:

  • check to ensure that the current and future pages have the same flow rate. (They do).
  • Save and close the file, quit FrameMaker and restart my computer
  • using a different paragraph tag
  • disable track text changes and try to move to the next page with text not marked
  • Select the preview with the text track changes mode off

  I've implemented the following:

  • FrameMaker 9.0p237
  • Windows 7 64 bit
  • A very rugged computer
  • A customer by a crazy time

  Help, please!

  Thank you

  Karen

  Great detective, Karen!  Each reference table has its own stream of individual text, so at some point got content added in the reference stream. I'm still working with text symbols indicating, for this reason, there is a little less likely to inadvertently get in the flow of bad content.

• Could someone help: right to left page headers

  Hi all. I've been using indesign for almost a year now and am that scratched the surface so please forgive if this is easy.

  I have a set book in place with a number of documents.

  The pages are fairly simple to print laser A4 back to back.

  "spreads" are implemented with the first page as an odd number. I've implemented indesign to always finish each document so that the next opens on an odd number.

  Very good, but...

  At the top of each page is the title of the page, on the left hand spread, it's on the left and on the right hand spread his right side, so when you print the page title always appear on the outer edge of the majority.

  Where everything breaks down, if I insert a page, and then do the following pages he sees the title inside edge. I hope I'm making sense.

  I could paste them into the master, but it is not just that I would have to replace each master page just to change the title. And I do not know how to proceed.

  So basically I always keep my titles appear on the outer edge, left for the left side spread like right on the right side that spread. If adding a page in the furture I need the rest of the pages to understand that they moved and adjust the title accordingly.

  Is this possible?

  The layer is a convenience. It menas you can put things everywhere where you (and who could become an issue with table of contents, which lists the elements according to the coordinates of the upper-left corner of the text block page) without having to go through any other special hoops. You can make an individual non-printable in the Panel object, but it's an extra step, or you can use type colored with the [None] swatch or any number of other devices, but once again, each one requires some additional effort beyond simply creating the text, and many of them have negative factors for publishers in the future to find.

  One of the disadvantages of the approach of the layer, is that if the text is redéroule, the separate framework will not move with it automatically. If it is a concern, then you would be better to use an anchored object and create an object style to make this invisible text.