Fake adapter?

Similar Questions

• Digital lightning original or fake av adapter

  Hello

  How do I know the digital lightning original or fake av adapter

  Online by serial number or model number?

  If it works it is unlikely to be a fake.  There is an IC personalized inside and it would not be a duplication for a small market value.

• USB to Serial Port Adapter

  Hi, my laptop is not a serial port.

  If I want to connect to some hardware using RS-232, RS-485, CANBUS etc, will I have problems using a serial USB adapter?

  When I was programming PIC microcontrollers, we were told not to use adapters to program the PIC. I found this a little confusing because the signal from the adapter must be identical to what would come of a serial port. I don't know what is the reason.

  Are there any known issues using a serial USB with hardware adapter (specifically the sbRIO-9651 reference carrier I use and also just in general) or I would be fine to use it?

  I have a box of NI USB - 232 which will stop working.  Not sure if it's a loop of mass or something with signals through it, but... Yes, they didn't last real long in my experience.  (It was years ago, I sent a bunch of back, don't know if improvements have been made since that time.)

  IOGear GUC-232 has and from SILabs CP2102/MAX3232 work well for me. never had a problem with those.  Anything FTDI is solid, beware fake chips with this manufacturer.

  7Fh has a HID-UART chip available (CP2110), which works well on machines that have restricted permissions for driver installation.

• HP Pavilion dv6 Notebook PC: replacement AC adapter

  Hello

  Update: I found the AC adapter plug. Thank you...

  I bought a HP Pavilion dv6 Notebook PC (used). The problem is that the AC adapter is overheating and battery (in Windows) information are constantly changing, "load" to "do not load"

  I would buy a new power adapter (including the power cord), but I want to make sure I buy the right, because the one I have right now says spare part (the original owner could buy a fake). The battery is also marked as a spare.

  Information on parts (those I have right now):

  AC adapter / CC: 65w. Input: 100-240 v ~ 50-60 Hz 1.6(1.6A). Output: 18.5V (18.5) 3.5 A (3.5 A)

  Product:

  Product name: LY894LA #ABM

  Serial number: [personal information]

  Thank you.

  Best regards.

  Hi @osk88 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-6166la and issues with the 65w AC adapter. Here is a link to your specifications product and it shows 120W AC adapter should be used.

  You can order parts directly from HP. Here is a link that might help.

  I hope this helps.

  Thank you.

• This computer has no announcement of uninstalled of configured wireless network adapter.

  I recently installed a new hard drive and had therefore to install a new version of windows vista. So I installed vista, but could not get on the internet. Just the computer will not read the wireless router. I have another computer and obviously it still works. I used it to download an updated driver for the NIC on the computer I just loaded vista on and that has not worked. What can I do?

  Hello

  Maybe this can help
  

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• In trying to retrieve the IP address, I get a message "connection to the Local Ethernet adapter, State media... network: media disconnected".

  Original title: connections to the LAN

  I can't establish an internet link. When I go to the command prompt to retrieve my IP address, I get a response stating, "ETHERNET ADAPTER LOCAL AREA CONNECTION: MEDIA STATE...". MEDIA DISCONNECTED. How would I fix this? Thanks for your help

  Hello

  Follow this procedure to ensure that the network the laptop is on and configured correctly.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to contact Microsoft to ask whether there is an updated driver for "Microsoft Virtual WiFi MiniPort adapter"

  When I checked the driver on this issue, I found this is version 6.1.7600.16385, dated 21/06/2006.After do a search, he started to download a replacement driver, but as it was not signed I cancelled the download. Then advised to contact Microsoft, which gave the pilot current, to see if there is a subsequent update. My system is Windows 7 Home Premium Service Pack 1, 64-bit on a Toshiba laptop.

  I do not pretend that you are worrying.  This is just the beginning post of this thread 'read' other posts from other users who have problems caused by those "fake" like most people 'all in one' driver updating software.  These never really find good "signed" drivers because there are "hundreds" of sites that can "host" similar named driver packages.  These packages can be 'false' or completely "valid" but usually "never verified."   Microsoft "allows us" to use their software and they officially publish the signed drivers on the Windows Update site.

  As a general rule, always get the driver on the web site of the official "publishers' support.  Anywhere else, 'we' need to be 'worried' about 'integrity' of the person who posted the package update driver.

  Microsoft Virtual WiFi MiniPort Adapter is a driver that Microsoft seems to use so 'of interface' with wireless network adapters.  It allow windows 'WLan' system to manage wireless network connections.

• "Wireless LAN, Wi - Fi adapter media disconnected".

  Hello, all,.

  So I had problems with my laptop Windows 8.1 and wireless internet connectivity. Recently, I saw a tip online to try the command "ipconfig/release" then in cmd.exe, followed a "ipconfig / renew". When I tried the second line, I got an error message saying "media disconnected" many cards. Here's my ipconfig:
  Windows IP configuration

  Name of the host...: KEVIN-LT

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: ARRIS

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : B4-B6-76-40-90-65

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 12:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : B4-B6-76-40-90-62

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 13:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Hosted network virtual card

  Physical address.... : B6-B6-76-40-90-61

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. : ARRIS

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 18-67-B0-DE-7E-CA

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::8cd5:1414:648e:e57 %4 (Preferred)

  IPv4 address: 192.168.2.9 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday 5 December 2013 01:52:46

  End of the lease...: Thursday 5 December 2013 23:46:28

  ... Default gateway. : 192.168.2.1.

  DHCP server...: 192.168.2.1.

  DHCPv6 IOOKING...: 256948163

  DHCPv6 DUID customer...: 00-01-00-01-19-4D-BF-D9-18-67-B0-DE-7E-CA

  ... DNS servers: 8.8.8.8.

  8.8.4.4

  209.55.27.13

  NetBIOS over TCP/IP...: enabled

  Wi - Fi wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : ARRIS

  ... Description: Intel Centrino Advanced-N 6235

  Physical address.... : B4-B6-76-40-90-61

  DHCP active...: Yes

  Autoconfiguration enabled...
  . : Yes
  Tunnel adapter isatap. ARRIS:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : ARRIS
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 2:
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:79fd:286 b: 16f9:3f57:fdf6 (Preferred)
  Address IPv6 local link...: fe80::286b:16f9:3f57:fdf6 %9 (Preferred)
  ... Default gateway. : ::
  DHCPv6 IOOKING...: 184549376
  DHCPv6 DUID customer...: 00-01-00-01-19-4D-BF-D9-18-67-B0-DE-7E-CA
  NetBIOS over TCP/IP...
  . : Disabled
  Any ideas on how to solve this problem? I would really appreciate it.
  Thank you!

  Hello

  If it's a laptop, laptops the most have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  On any computer.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

• New AC adapter 65W 40Y7704 has 2 pin socket - is authentic?

  Last week I bought a spare adapter 65 - part no 40Y7704 - and was surprised to find it came with a power of 2-pin cord (i.e. where it plugs into the power brick) rather than pin 3 "clover", one with my original (and other ThinkPads I've owned).

  Is this true or maybe it's a fake? He was bought as a genuine part of Lenovo from a reputable site and seems convincing enough (form, labels, logos etc.) Although the seal came in a regular box without a Lenovo. Perhaps it's just a change in politics (it's a little harder to find the power cords clover 2 pin those IMO)?

  Veriton wrote:

  Maybe it's a fake?

  (snip)

  reputable site and seems convincing enough (form, labels, logos etc.) Although the seal came in a regular box without a Lenovo.

  My instinctive reaction, feeling is he may very well not be part lenovo authentic.

  Cutting power Adpaters are one of electronic products more easily and more frequently "rigged" market.

  See you soon,.

  Bill

• Fake call Tx detected with 160 seconds timeout

  I just upgraded ESXi hosts to 6 5.5U2 8. 0 b (2809209).  The first host I have improved (a Dell R910) is fine for about a week and then died in the middle of the night Sunday night.  Came to him hung up, couldn't SSH to it, does not respond on the console and was shown as disconnected in vCenter, all virtual machines on it had HA'ed to other hosts.  Should be able to turn off that through iDrac and he came fine.  The syslog feature stopped 9 minutes before the events in vCenter showing he's going down, so I couldn't check the newspaper to see what happened before he went down.  Writing chalked up an anomaly and put back into production.  Less than 24 hours later, woke to pages of our monitoring system of virtual machines on the same host.  These virtual machines are inaccessible.  The host was always sensitive and marked as upward in vCenter.  Cannot open consoles for any of the virtual machines on this host.  Was able to SSH in the host and it was in the vmkernel.log:

  (2015 08-11 T 11: 14:52.338Z cpu23:33245) < 6 > 0000:41:00.0 ixgbe: vmnic4: hang Fake Tx detected with 160 seconds timeout

  (2015 08-11 T 11: 14:53.340Z cpu23:33256) WARNING: Linnet: netdev_watchdog:3678: NETDEV WATCHDOG: vmnic5: transmit timed out

  (2015 08-11 T 11: 14:53.340Z cpu23:33256) < 6 > ixgbe 0000:41:00.1: vmnic5: hang Fake Tx detected with 160 seconds timeout

  (2015 08-11 T 11: 14:53.340Z cpu23:33256) WARNING: Linnet: netdev_watchdog:3678: NETDEV WATCHDOG: vmnic4: transmit timed out

  (2015 08-11 T 11: 14:53.340Z cpu23:33256) < 6 > 0000:41:00.0 ixgbe: vmnic4: hang Fake Tx detected with 160 seconds timeout

  (2015 08-11 T 11: 14:54.342Z cpu19:33251) WARNING: Linnet: netdev_watchdog:3678: NETDEV WATCHDOG: vmnic5: transmit timed out

  (2015 08-11 T 11: 14:54.342Z cpu19:33251) < 6 > ixgbe 0000:41:00.1: vmnic5: hang Fake Tx detected with 160 seconds timeout

  (2015 08-11 T 11: 14:54.342Z cpu19:33251) WARNING: Linnet: netdev_watchdog:3678: NETDEV WATCHDOG: vmnic4: transmit timed out

  (2015 08-11 T 11: 14:54.342Z cpu19:33251) < 6 > 0000:41:00.0 ixgbe: vmnic4: hang Fake Tx detected with 160 seconds timeout

  These repeated again and again many times per second.  The host locked again shortly after and had to be restarted to force the VMs system HA to other hosts.

  The vmnic4 and vmnic5 are ports on the same Intel NETWORK adapter X 520-2 (two ports), Intel, not the re-brand of Dell version version.  We have two of these network adapters in each host with the ports of the other card of the NETWORK being vmnic6 and vmnic7.  vmnic4 and vmnic6 go to our network local, vmnic5 and 7 go to our iSCSI network.  These cards use the IGB driver (ethtool reports 3.21.6iov * last * with firmware version 0x61c10001).  TSO and LRO are off due to problems that we already had.  I spent yesterday upgrading all the firmware on the host of problem but the Intel X 520 - 2 does not appear to be newer firmware that I can find, even if Dell seems to have a version for it which does not apply to these network cards Intel version.

  The host of problem is currently in production with a very low charge on it for more than 24 hours so far and I am increasing the load on a regular basis to see if it eventually bombs again.

  Googling "Fake Tx crash detected" results in a lot of older hits, mostly from the Linux IGB problems associated with pilots.  Nothing to really related to VMware.  And nothing that seems relevant.

  Any ideas?  Find it me hard to believe that the NIC itself suddenly has gone wrong that this host has been with us for years without problems until we went to 6. 0b.  I have an another R910 which was bought at the same time that I'm tired of the upgrade that I can't have two hosts having problems it would cause problems of capacity within our cluster.

  Say that there is no work around and the only solution was to go down to 5.5U2 when I opened a SR with VMware, I discovered other ways there is a workaround script that seems to change the management of interruptions of CPU from automatic to manual, which is supposed to be the cause of this problem.  Why VMware is distributing this script to some people and not others that I don't know, I hope it was just the tech who worked my case not having is no knowledge of the script of the workaround at the time said.

  EDIT: I should add that since the purpose of this script to our guests, we have not seen the problem still happen when I had three accidents in the first week.  /knockonwood

• Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

  Hello gurus,

  : Server 1 HFM

  : Server 2 FDM

  Server 3: Database server

  1. I have managed to create an application of FDM using FDM web client.

  2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.

  3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.

  4. we have then configured the adapter with success.

  5. we get the following question when browse us the metadata -> control tables

  Cannot retrieve the data on the target system

  6 log has the following entry

  Error:

  Code...-2147220966

  Description... System.Runtime.InteropServices.COMException (0x8004021A):

  {0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error

  at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)

  at fdmFM11XG6C.clsHFMadapter.fConnect)

  Process... clsFMAdapter.fConnect

  Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll

  Version... 1116

  Identification:

  ... The admin user

  ... Computer name < servername FDM >

  Connection of FINANCIAL MANAGEMENT:

  Name of the application...

  Name of the cluster...

  Field...

  Connect status... No open connection

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.

  -------------------------------------------------------------

  ERROR:

  Code............................................. 10054

  Description... Adapter function [fConnect] failed.

  Process... clsBlockProcessor.DimensionList

  The component... upsWBlockProcessorDM

  Version.......................................... 1112

  Thread........................................... 80304

  IDENTIFICATION:

  User............................................. admin

  ... Computer name < servername FDM >

  Name of the application... < name of application of FDM >

  Client App....................................... WebClient

  CONNECTION:

  Provider......................................... SQLOLEDB

  Server data... < database server name >

  Name of database < database name >

  Trust connect... Fake

  Connect status... Open connection

  GLOBALS:

  Location......................................... Sample

  Location ID... 748

  Location Seg... 2

  Category......................................... WLCat

  ID of the category... 12

  Period........................................... Oct - 2013

  Period ID........................................ 10/31/2013

  POV Local........................................ Fake

  Language......................................... 1033

  User Level....................................... 1

  All Partitions... True

  Is Auditor....................................... Fake

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.

  -------------------------------------------------------------

  ERROR:

  Code...-2146818234

  Description... Adapter function [fConnect] failed.

  Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList

  Any help will be much appreciated.

  Thank you all for your help...

  It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

  Keep the username blank password in the configuration of the machine profile has solved the problem.

• How to add a VMXNET3 adapter

  I'm exploring the PowerCLI help file and cannot find the VMXNET3 setting.

  Type

  Specifies the type of the network adapter that you want to create. Valid types are e1000, Flexible, Vmxnet, EnhancedVmxnet. If the parameter is not specified, the network adapter is created of the type recommended by VMware for the particular person OPERATING SYSTEM.

  fake

  fake

  Anyone who successfully adding the PowerCLI VMXNET3 adapter?

  Try this... it of not pretty, but should do the trick

    $filter = @{"Name" = "Test"}
    $VM = Get-View -ViewType "VirtualMachine" -Filter $filter
  
    $NetworkBacking = New-Object Vmware.Vim.VirtualEthernetCardNetworkBackingInfo
    $networkbacking.deviceName = "VM Network"
  
    $NetworkSpec = New-Object Vmware.Vim.VirtualVmxnet3
    $NetworkSpec.key=-1
    $NetworkSpec.backing=$NetworkBacking
  
    $VDevSpec = New-Object Vmware.Vim.VirtualDeviceConfigSpec
    $VDevSpec.operation = 'add'
    $VDevSpec.device = $NetworkSpec
  
    $VmConfigSpec = New-Object Vmware.Vim.VirtualMachineConfigSpec
    $VmConfigSpec.deviceChange = $VDevSpec
    $VmConfigSpec.changeVersion = $Vm.config.changeVersion
  
    $Vm.ReconfigVM( $VmConfigSpec );
  

• The publication of the JCA adapter error.

  Hello
  
  I created a DBAdapter through JDeveloper and created the .bz file of the. JCA file using the OSB eclipse console. I have provided data source configurations and deployment on the weblogic server. When (executed on the server) published the .bz file, I get error follolwing.
  ===============================================================
  < 17 March 2011 20:06:12 IST > < WARNING > < netuix > < BEA-423420 > < Redirect is executed to start or refresh action. Redirect URL is /console/console.portal?_nfpb=true & _pageLabel = ConnectorApplicationOverviewPage & ConnectorApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DDbAdapter%2CType%3DAppDeployment%22%29. >
  < 17 March 2011 20:06:12 IST > < WARNING > < WebLogicDescriptorWL > < BEA-2156000 > < D:\Oracle\Middleware\Oracle_OSB1\soa\connectors\plan 'config-root' was not >
  < 17 March 2011 20:07:21 IST > < error > < JCATransport > < BEA-381979 > < an error has occurred during the transport JCA endpoint validation, exception: javax.resource.ResourceException: cannot find class oracle.tip.adapter.db.DBWriteInteractionSpec Java
  javax.resource.ResourceException: cannot find class oracle.tip.adapter.db.DBWriteInteractionSpec Java
  at oracle.tip.adapter.sa.impl.fw.validation.WSDLDeploymentValidation.validateWsdlJcaBindingOperation(WSDLDeploymentValidation.java:338)
  at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadataHelper.validateJCAOperationSpecProperties(JCABindingEndpointMetadataHelper.java:262)
  at oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadata.validateJCAInteractionSpecProperties(JCABindingEndpointMetadata.java:348)
  at oracle.tip.adapter.sa.impl.JCABindingEndpointContextImpl.validateJCAInteractionSpecProperties(JCABindingEndpointContextImpl.java:151)
  at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.validateJCAInteractionSpecProperties(JCABindingReferenceImpl.java:154)
  Truncated. check the log file full stacktrace
  >
  ===========================================================================
  
  The data source > the outbound connection properties
  
  dataSourceName java.lang.String
  fake java.lang.Boolean defaultNChar
  platformClassName java.lang.String org.eclipse.persistence.platform.database.Oracle10Platform
  java.lang.Integer sequencePreallocationSize 50
  true java.lang.Boolean usesBatchWriting
  true java.lang.Boolean usesNativeSequencing
  true java.lang.Boolean usesSkipLocking
  xADataSourceName java.lang.String jdbc/JDBCEmp
  
  
  If I reboot the server, I get a different error
  
  < 17 March 2011 20:00:53 IST > < WARNING > < coherence > < BEA-000000 > < Oracle coherence (Member = n/a) 3.5.3/465p2: Local address '127.0.0.1' is a loopback address. This cluster node does not connect to the nodes located on different machines > < 17 March 2011 20:01 IST > < WARNING > < WliSbTransports > < BEA-381917 > < MQ Transport could not be saved due to: Missing MQ library > < 17 March 2011 20:01:01 IST > < error > < hats > < BEA-149205 > < could not initialize the application "DbAdapter" due to the error weblogic.application.ModuleException : A < jndi name > is specified for the resource adapter bean in weblogic - RA.xml but class < resourceadapter > nothing is specified in ra.xml.weblogic.application.ModuleException: a < jndi name > is specified for the resource adapter bean in weblogic - RA.xml but class < resourceadapter > nothing is specified in ra.xml to weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:229) to weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:507) to weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) to weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149) truncated. check the log file full stacktrace > < 17 March 2011 20:01:01 IST > < error > < hats > < BEA-149205 > < failed to initialize the application "OracleAppsAdapter" due to the weblogic.application.ModuleException error: java.lang.NoClassDefFoundError: oracle/tip/adapter/db/DBManagedConnection.weblogic.application.ModuleException: java.lang.NoClassDefFoundError: oracle/tip/adapter/db/DBManagedConnection to weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:239) to weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199) to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:507) to weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41) to weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149) truncated. check the log file full stacktrace
  Caused by: java.lang.ClassNotFoundException: oracle.tip.adapter.db.DBManagedConnection to weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280) to weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253) to java.lang.ClassLoader.loadClass(ClassLoader.java:307) to java.lang.ClassLoader.loadClass(ClassLoader.java:248) to weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:177) truncated. check the log file full stacktrace > [ERROR] AdapterManager - Manager of ServletContainerAdapter not initialized successfully.
  Debugger Oracle Service Bus is listening on port 7453.
  < 17 March 2011 20:01:14 IST > < opinion > < LoggingService > < BEA-320400 > < D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. > < 17 March 2011 20:01:14 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log00013. Log messages will continue to be connected to D:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\logs\base_domain.log. > < 17 March 2011 20:01:14 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. > < 17 March 2011 20:01:14 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN > < Mar 17, 2011 20:01:14 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING > < 17 March 2011 20:01:14 IST > < WARNING > < Server > < BEA-002611 > < Hostname "PC102536.cts.com". , corresponds to multiple IP addresses: 10.226.187.76, fe80:0:0:0:197 b: 851 d: ec88:5730 11% > < 17 March 2011 20:01:14 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 10.226.187.76:7001 for iiop, t3, ldap, snmp, http protocols. > < 17 March 2011 20:01:14 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:197 b: 851 d: ec88:5730:7001 for iiop, t3, ldap, snmp, http protocols. > < 17 March 2011 20:01:14 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 0:0:0:0:0:0:0:1:7001 for iiop, t3, ldap, snmp, http protocols. > < 17 March 2011 20:01:14 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on 127.0.0.1:7001 for iiop, t3, ldap, snmp, http protocols. > < 17 March 2011 20:01:14 IST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:0:5efe: ae2:bb4c:7001 for iiop, t3, ldap, snmp, http protocols. > < 17 March 2011 20:01:14 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "AdminServer' field 'base_domain" running in development Mode > < 17 March 2011 20:01:15 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE > < 17 Mar 2011 20:01:15 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation > < 17 March 2011 20:01:23 IST > < error > < JCATransport > < BEA-381979 > < an error occurred during validation of JCA transport endpoint, exception: javax.resource.ResourceException: cannot find class oracle.tip.adapter.db.DBWriteInteractionSpecjavax.resource.ResourceException Java : could not find Java class oracle.tip.adapter.db.DBWriteInteractionSpec to oracle.tip.adapter.sa.impl.fw.validation.WSDLDeploymentValidation.validateWsdlJcaBindingOperation(WSDLDeploymentValidation.java:338) to oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadataHelper.validateJCAOperationSpecProperties(JCABindingEndpointMetadataHelper.java:262) to oracle.tip.adapter.sa.impl.meta.JCABindingEndpointMetadata.validateJCAInteractionSpecProperties(JCABindingEndpointMetadata.java:348) to oracle.tip.adapter.sa.impl.JCABindingEndpointContextImpl.validateJCAInteractionSpecProperties(JCABindingEndpointContextImpl.java:151) to oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.validateJCAInteractionSpecProperties(JCABindingReferenceImpl.java:154) truncated. check the log file full stacktrace
  
  
  =======================================
  
  Please help me on this...
  Thank you
  PM

  Caused by javax.resource.spi.InvalidPropertyException: double Exception of property values.
  The properties [xADataSourceName] and [dataSourceName (both in the connector properties)] is not both can be [JDBCEmployee].

  I think the mistake is quite obvious. In pool (DBAdapter) connections, you must set xADataSourceName (for XA data sources) or dataSourceName (for non - XA data sources) but NOT both. Disable any of these properties and redeploy/upgrade the DBAdapter after you made the change.

  Kind regards
  Anuj

• Fake H710p PERC? -Firmware upgrade error

  Hallo,

  I recently bought a DELL PERC's H710p to the address but I can't update the firmware or install the driver. I always get an error like:
  "No controllers present or detected."

  First I thought that this is because the PERC H710p is not supported on a DELL R710 server. But after some research, I found something weird.

  The reason why the update of the firmware fails is simply the fact, that the "SUBDEV = 1f38" required when updating cannot be fond. My 'H710p' has a different SUBDEV. His SUBDEV is 1f77. So my question is, I bought some controller "false"?

  If this is not a 'fake' controller, what should I do to update my H710p and how to install the drivers?

  Thank you

  Here is the log from Megafl:

  Card #0

  ==============================================================================
  Versions
  ================
  Product name: adapter PERC H710P
  Serial number : xxxxx - Im not sure if its save to publish a sn on the internet. But if a job DELL need to check the controller, please send me a PM.
  FW Package Build: 21.0.2 - 0002

  Data from MFG.
  ================
  MFG Date: 01/04/13
  Transfer date: 01/04/13
  Revision no.: A00
  Battery FRU: n/a

  Version of the image in Flash:
  ================
  BIOS version: 5.30.00_4.12.05.00_0x05110000
  CTRL-R Version: 4.00 - 0014
  Pre-launch CLI version: 05.00 - 03: # 00008%
  FW version: 3.130.05 - 1587
  NVDATA Version: 2.1108.03 - 0093
  Boot block version: 2.03.00.00 - 0003
  STARTING version: 06.253.57.219

  Images pending in Flash
  ================
  None

  PCI Info
  ================
  Provider code: 1000
  Device ID: 005
  SubVendorId: 1028
  SubDeviceId: 1f77

  Host interface: PCIE

  Frontend Port number: 0
  The Device Interface: PCIE

  Backend Port number: 8
  Port: address
  0 4433221102000000
  1 4433221103000000
  2 0000000000000000
  3 0000000000000000
  4 0000000000000000
  5 0000000000000000
  6 0000000000000000
  7 0000000000000000

  HW configuration
  ================
  SAS address: 590b11c04b521300
  BBU: present
  Alarm: Absent
  NVRAM: present
  Debugger series: present
  Memory: present
  Flash: present
  Memory size: 1024MB
  TPM: Absent
  On board the Extender: Absent
  Key update: Absent
  Sensor of temperature for ROC: present
  For controller temperature sensor: present

  ROCK temperature: 57 degrees Celcius
  Temperature controller: 57 degrees Celcius

  Parameters
  ================
  Current time: 20:28:33 9/4, 2013
  Predictive failure polling interval: 300sec
  Interrupt the active gas number: 16
  Interrupt the completion of the throttle: 50us
  Regeneration rate: 30%
  PR rate: 30%
  BGI rate: 30%
  Consistency check rate: 30%
  Rebuild rate: 30%
  Cache flush interval: 4 s
  Max led to spin-up at the same time: 4
  Between groups of spin-up time: 12s
  Coercion of physical training mode: 128 MB
  Cluster mode: disabled
  Alarm: disabled
  Auto regeneration: enabled
  Battery warning: enabled
  ECC bucket size: 15
  ECC bucket leak rate: 1,440 Minutes
  Restore the hot spare to the Insertion: disabled
  Exposing pregnant devices: disabled
  Keep the history of the PD Fail: disabled
  Reorganization of host application: enabled
  Auto Detect Enabled BackPlane: SGPIO/i2c MS
  Load balancing mode: automatic
  Use only the FDE: Yes
  Security assigned key: No.
  Security key failed: No.
  Not saved security key: No.
  Default policy LD PowerSave: controller set
  Maximum number of disks to connect direct to the top at 01:00
  Any Cache offline VD kept: No.
  Allow booting with preserved Cache: No.
  Disable controller Reset online: No.
  KFC in NVRAM: No.
  Use the disk activity to locate: No.

  Capacity of
  ================
  RAID levels supported: RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, 11 with covering PRL, layout of PRL11-RLQ0 DDF with no span, DDF PRL11-RLQ0 available with span
  Supported disc: SAS, SATA

  Permit mixture:

  Mix allowed attachment

  Status
  ================
  ECC Bucket Count: 0

  Limits
  ================
  Max of weapons by VD: 32
  Max extends by VD: 8
  Max tables: 128
  Maximum VDs: 64
  Max parallel orders: 1008
  County EMS max: 60
  Max Data transfer size: 8192 sectors
  Max band PerIO: 42
  Band of min size: 64 KB
  Max band dimensions: 1. 0 MB
  CacheCade varied size: 512 GB
  Current size of CacheCade: 0 GB
  The current size of the Cache FW: 887 MB

  Current device
  ================
  Virtual drives: 1
  Gradient: 0
  Offline: 0
  Physical devices: 2
  Disks: 2
  Critical records: 0
  Has no records: 0

  Card operations support
  ================
  Rebuild rates: Yes
  Rate of CC: Yes
  BGI rate: Yes
  Rebuild rates: Yes
  Patrol read rate: Yes
  Alarm control: Yes
  Cluster support: No.
  BBU                             : No
  Spanning: Yes
  Dedicated backup: Yes
  Reversible spare discs: Yes
  Foreign Config import: Yes
  Auto diagnosis: Yes
  Allow the joint redundancy on table: No.
  World Relief: Yes
  Deny SCSI Passthrough: No.
  Reject the SMP Passthrough: No.
  Deny STP Passthrough: No.
  Security: Yes
  Snapshot enabled: No.
  Support ECO without adding drives: Yes
  Support the KFC: No.

  Operations supported VD
  ================
  Read the policy: Yes
  Write policy: Yes
  IO policy: Yes
  Access policy: Yes
  The strategy of Disk Cache: Yes
  Reconstruction: Yes
  Deny locate: No.
  Reject the CC: No.
  Allow encryption Ctrl: No.
  Turn on LDBBM: Yes
  Breakmirror support: Yes
  Energy savings: Yes

  PD supported operations
  ================
  Force online: Yes
  Force offline: Yes
  Rebuild the force: Yes
  Deny the Force failed: No.
  Deny the good/bad Force: No.
  Refuse to replace missing: No.
  Deny Clear: Yes
  Deny locate: No.
  Support temperature: Yes
  Disable the Copyback functionality: No.
  Enable JBOD: No.
  Enable the feature Copyback on CHIP: No.
  Activate Copyback of SSD on SMART error: No.
  Select SSD read: No.
  PR Correct unconfigured areas: Yes
  Enable Spin Down of unconfigured disks: No.
  Turn off the Spin Down of the hot spare function: Yes
  Spin-Down time: 30
  T10 power state: Yes
  Errors counters
  ================
  Memory correctable: 0
  Mistakes not rectifiable memory: 0

  Cluster information
  ================
  Authorized cluster: no
  Cluster Active: No.

  Default settings
  ================
  PHY polarity: 0
  PHY PolaritySplit: 0
  Base rate: 30
  Band size: 64 KB
  Hunting time: 4 seconds
  Write policy: WB
  Read the policy: Adaptive
  Be cached when BBU Bad: disabled
  IO caching: No.
  SMART mode: Mode 6
  Turn off the alarm: No.
  Mode of coercion: 128 MB
  ZCR Config: unknown
  Dirty disk activity LED Watch: No.
  BIOS continue on error: No.
  Spin-Down Mode: no
  Authorized device type: SAS/SATA Mix
  Allow Mix attachment: Yes
  Allow to Mix SAS/SATA HDD to VD: No.
  Allow Mix SAS/SATA SSD in VD: No.
  Allow Mix HDD/SSD in VD: No.
  Enable SATA in Cluster: No.
  Chained Max speakers: 4
  Disable Ctrl-R: No.
  Enable Web BIOS: No.
  Direct Mapping PD: Yes
  BIOS enumerate VDs: Yes
  Restore the hot spare integration: No.
  Exposing pregnant devices: No.
  Keep the history of the PD Fail: No.
  Disable any perforation: No.
  Zero based speaker enumeration: Yes
  PreBoot CLI enabled: no
  Disk activity see the LED: Yes
  Disable cluster: Yes
  Disable SAS: No.
  Auto Detect Enable BackPlane: SGPIO/i2c MS
  Use only the FDE: Yes
  Led enable header: No.
  Delay during the POST: 0
  EnableCrashDump: No.
  Disable controller Reset online: No.
  EnableLDBBM: Yes
  Uncertified hard disk drives: enable
  Treat simple span R1E as R10: Yes
  LD max by the Bay: 16
  Energy saving option: don't turn down the readers not configured
  Don't turn down hot spares
  Do not Auto centrifuge configured Drives
  Power settings apply to all readers - cannot set the individual parameters of power PD/LD
  Max power savings option is not allowed for LDs. supply Conditions only T10 should be used.
  Written in cache is not used for queue down VDs
  Annex can disable save energy at the level of the controller
  By default the spin time in minutes: 30
  Enable JBOD: No.
  Journal of the ATS in Flash: no
  Auto improved Import: No.
  BreakMirror RAID support: Yes
  Disable the join mirror: Yes
  Time required to detect the CME: 60 s

  Exit code: 0x00

  Controllers H710 series have been tested and validated in the Dell only 12 servers (such as the PE 720) generation.   Further, check your H710p came from a Precision Workstation.  The following valid this information, which came from the file nocheck.bat for this controller:

  OFF @Echo
  CLS

  put the FW = 21.0.2 - 0002
  Set ROM = H710PAWS.rom
  SUBDEV = 1f77 set
  DOS32A = set / AC /NOWARN:9004

   
  You will need this patch: http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=CGM2K which is the latest available for this particular controller.

  The controller may or may not work in your PE710, it just has not been tested or validated.  Good luck!

  Kind regards