Blocking issues particular junkmail

Similar Questions

• I would like to know how to block a particular website of all browsers.

  Original title: blocking websites

  I need to know how to block a particular all browsers Web site. I don't want to go into each browser to configure the modules or extensions. I want a challenge. Quick and easy. Something I can do when I add user accounts.

  Go into the hosts file and draw a line for each domain/Web site you want to block and make reference to the following 127.0.0.1 and the name acronis.com

  For example, I've blocked Acronis.com (see figure)

  You will have to take possession of the hosts file in order to save the edition

  The host file is located in window\system32\drivers\etc

  When a browser attempts to access a site that is blocked, he'll tell: page not found and error

  

• Hi all, I have little doubt all blocking issues?

  Block delivers the means

  When there is #Missing in cube it only creates blocks.

  ex script: calculation - California = newyork + 100;

  for this equation 1 my cube is now empty (#missing), I ran above.it calculation script won't get showing data.it #missing.

  If I use createnonmissingblock or createblockonequation, it will work: data, it will show.

  2. now I enter some data in New York only and in California, is #missing.now I ran above work calculation script.it means data is it in California with 100 + New York data.

  If the above 2 points correct ways. my doubt is. California = New York 100; if New York with some of its data empty fine.if of New York, which is uses California = newyork + 100 New York data are not there (#missing) which is used to give of California = New York 100 +

  My conclusion is if data is in cube, we get block issues.if used it is not here that we get block questions is this correct or not?

  3035274 wrote:

  Hi Dan,.

  Thanks for the reply.

  you gave the link in this 4 ex: according to the formula and the structure of the data, calculate a formula top-down and bottom-up may involve two questions.

  As I sad given is the first mandatory next top down or bottom up to overcome the block issued.

  

  Dan can you explain this.

  There of not much to the MFI here, documentation is simply illustrating behaviors from the top down vs bottom.

  If there is no block for the sparse intersection not supposed to contain a computed value and the calculation is a bottom-up fashion, then nothing is calculated. It is because in calc from the bottom up, Essbase will evaluate block to determine by looking at the index. Because there is no entry in the index for Cola-> New York-> Budget, since the block does not exist, then nothing is calculated.

  In descending mode, Essbase will evaluate all possible sparse intersections.

• Blocking issues, of sleep and extended Vista

  Running Vista Enterprise edition on a HP 6930p with Service Pack 2 installed. Some days, that the machine works well, if I lock it then he out of lock fine, if I left in standby mode, I have to reboot for it to wake up. Other times I hit ctrl + alt + delete and nothing happens, system does not allow me to lock it. Cause then me having to let him sleep on his own, which then means that I have to restart it wound out of mode "Eve". Have turn off Hibernate that too did not work for me. Apply all patches, patches and do it yourself links I can find on the site of microsoft and the knowledge base. If anyone has a better solution, circumvent or difficulty apart from reinstalling Vista, please let me know. It is an end-user machine and has been a problem since giving him the laptop with Vista installed.

  The machine itself is built from a brand image and not really tested before the user receives. The question also not spread wide which means we have a lot of users with similar HP and vista, but not the problem. This leads me to believe that a driver problem is to blame or maybe a setting within the system itself. I did the BIOS update and patches installed and used the latest drivers from the HP site. This seems to fix the problem at the time, but I have a particular user that this keep recurring with. Any other suggestions would be great, thx

• Tactile blocking issue 10

  Hello

  We use SX80 along the CTS-CTRL-DVX-10 +. We were faced with cause to touch 10 suspended i.e. a circle rotating guard on the Center with blue screen and nothing happens. After about 2-3 minutes, it returns its own. So, we did the RMA to touch and same question came up after 10 days.

  We use a gray flat Ethernet CABIN cable - DV1 - 12. 5 m, which comes from Cisco

  So, we went SX80 TC7.3.6 version 7.3.6 TC. But the situation is always the same. We even restarted the box taking cable POE

  If someone can guide?

  regds,

  Aman

  Have you tried changing the Ethernet cable?

  We had several devices with similar issues and that grey flat cable was nearly always the problem.

  You can use regular Ethernet cable to test.

• Oracle SQL Developer 3.0: Debugging of PL/SQL anonymous blocks: ISSUES

  Hello
  I just downloaded the Oracle SQL Developer 3.0. I used EA versions because they have emerged and was happy to see the final version. So I immediately tried to debug an anonymous block (something I was not looking to do in EA versions) and nothing happened.
  
  The "Debug" is grayed out and the string 'ctrl-SHIFT-F10' key did nothing. I found this forum:
  Re: 30EA1: debugging of anonymous block?
  and Vadim Tropashko follow-up advice. This has nothing to my anonymous block but has worked well for a simple example.
  
  So I started to whittle my anonymous block to the bottom to find the culprit, here's a breaking point repeatable for me:

  declare
      stmt1 long;
      stmt2 long;
      stmt3 long;
      stmt4 long;
      p_data varchar2( 500 );
      i      varchar2( 10 );
  BEGIN
      STMT1 := 1;
      STMT2 := 1;
      STMT3 := 1;
      STMT4 := 1;
      
      --the moment this is in the block "Debug" is no longer an option
       select
          SendDocumentResult
         into
          p_data
         from
          XMLTABLE( '/data' 
                  PASSING 
                  xmltype.createxml( '<?xml version="1.0" encoding="utf-8"?><data><SendDocumentResult>test</SendDocumentResult></data>' ) 
                  COLUMNS SendDocumentResult varchar2( 1000 ) PATH 'SendDocumentResult' ) ;
  end;

  The moment that I SELECT INTO... XMLTABLE() it fails (a normal SELECT INTO works very well).
  
  Is this a problem with my environment or there's a problem with SQL Developer 3.0.04. Overlooking the comments of K, it seems that debugging has worked for 'simple' blocks, so I wonder if it's just out of reach...
  
  My environment:

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production     
  PL/SQL Release 11.2.0.1.0 - Production                                           
  CORE     11.2.0.1.0     Production                                                         
  TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production                
  NLSRTL Version 11.2.0.1.0 - Production
  
  and Oracle SQL Developer
  3.0.04 (Buld Main 04.34 with bundled Java) on a Window's XP box.

  The analysis has been the problem indeed. Can offer no alternative workaround, that packing horror XML in a view.

• How can I get User Account Control to STOP blocking a particular program?

  UAC continues to ask me if I trust Java (jucheck.exe) update program even if I always click "allow." It's really annoying.

  Log in as an administrator and change the update tool itself do not ask to update.

  or

  User Account Control (UAC) notifies you before changes are made to your computer that requires an administrator-level permission. The default UAC notifies you when programs try to make changes to your computer, but you can change how often UAC notifies you.

  do a little reading.

  My answer is still standing and so, what happens if I am boring.

  I gave the right answer and I googled ' ed the question and found all sorts of responses just like mine.

  Noting that I programmed a Tandy 1000 in high school, using programming base of door in Turbo C Windows form. This has nothing to do with you doing a little reading on a fundamental approach to programming.

  If above the falls, read the manual.

  http://www.TechRepublic.com/blog/window-on-Windows/selectively-disable-UAC-for-your-trusted-Vista-applications/635

• Block a particular cell on each row in a table

  I have a single Table ("TableA") with 4 rows - all named 'Row '. So... Row [0], row [1], row [2] and row [3].

  
  

  Each row has 3 cells.

  What I'm trying to make is the cell ("Cell2") to lock the 2nd row - locking, essentially an entire column.

  I tried to use the script on a button, but it does not work.

  TableA.Row [*]. Cell2.access = 'protected ';

  Any ideas?

  Thanks in advance!

  Tony

  I figured it using a loop statement...

  Let this posted just in case it helps someone else in the future!

  lines of the var = xfa.resolveNodes ("TableA.Row [*]. Cell2");

  for (var i = 0; i)< rows.length;="">

  {

  var lockField = rows.item (i);

  lockField.access = 'protected ';

  }

• Block emails from senders

  If you block a particular sender, do they get an email telling them that they are blocked if they send you an email?  Or any kind of error message?

  Lol it's just in your deleted items folder. (if you are using Outlook Express).

• Complete security for the family by blocking programs after uninstall

  Hello

  I tried to activate the control of application on my son's account to prevent it from playing games online before major exams.

  I activate the control application and checked the games'programs and only game programs.
  It appeared that she also blocked Open Offfice programs (office of her school program)
  and he could no longer do his homework on his computer.
  So I tried to turn it off.
  It did not work.

  I tried in many ways, in vain,
  so I tried to uninstall the parental control.
  Totally: uninstalled Windows live on your PC (standard Microsoft recommended procedure).
  delete his account on the Microsoft Family Safety Web site.
  deleted the account parent on the Web site too.

  I tried CCleaner.

  By blocking.
  How a program always popup blocking issues after uninstall is complete?
  It is totally buggy!

  Tried to reinstall averything, check everything restart, uncheck everything.
  By blocking.

  Dumbest thing I've seen: a parental control popup telling me that family safety has blocked... Family safety!

  How can I clear out bleach these flags hidden scrap blocking?

  Please don't tell me to follow the official Microsoft uninstall procedure.
  I already did it twice.
  I need a patch, a difficulty, a hammer blacksmith for this program bugged.

  Current status: disabled family installed and active, the control of the application, always blocking Open Office.

  Thank you.

  Hello

  I saved my son data (excluding ApData which I knew well for hide hidden control settings).
  delete his account;
  restarted;
  re-created his account,
  reinstalled Live Family Safety;
  it activated on son's account.
  restarted.

  I tried OpenOffice and the game, are not blocked.

  I'll wait some time (it has a lot to do to build on green energy for school) before trying again to activate the control of the application.

  Thank you for your support.

  Pascal

• Need to find a way to block a MAC address

  Hi all

  I'm trying to block a certain MAC address or get an IP via DHCP, or if not possible to access the network.  I have remote sites with Cisco routers, but have not all Cisco switches.  What I find is that some people are plugging their devices and portable personal computers to the network.  Since I caught and got the MAC address of the DHCP bindings, I'm willing to put in some sort of rule to block.  I asked, but they openly ignore me.  If I have something in the router, they can get around that.  I tried to create an access list 700 to block the mac, but that doesn't seem to work.  I tried this on a Cisco 1841, 1921 and 2901 and it did not work.  Guidance on how to block a particular MAC address, or a bit of doing anything with a Cisco router, running, but without a Cisco Switch location is greatly appreciated.

  Thank you

  David

  Far from having a full network as Cisco ISE access control system, it is easier to do on your DHCP server, but whether or not you can do depends on the type of server you are using.

• Kill the blocker

  Hi all

  11.2.0.1

  We have been long hampered by a blocking process that prevents our batch process to complete successfully during midnight.

  This script has helped me identify the blocker, but did not provide the serial number #r to kill the process.

  
  

  Select distinct s1.username | » @'|| S1.machine | "(INST =' | s1.inst_id |) ' SID = ' | S1.SID |')

  blocks ' | S2. UserName | '@' || S2.machine | ' (INST =' | s1.inst_id |') SID =' | S2.SID |') '

  LIKE blocking_status, s2.program, s3.sql_id, s3.sql_text gv$ lock l1, gv$ session s1, gv$ lock l2, gv$ session s2, s3 in v$ sql

  where s1.sid = l1.sid

  and s2.sid = l2.sid

  and l1.block = 1

  and l2.request > 0

  and l1.id1 = l2.id1

  and l2.id2 = l2.id2

  and s2.sql_id = s3.sql_id;

  She that look, to prove that I am not 'lazy' I revised the script and tell me if it fixes by testing your respective DB.

  Here is my modified script:

  Select distinct 'alter system kill session' | " ' || S1.SID | «, » || S1. Serial#||',@'|| S1. INST_ID | " ' GV $ lock l1, gv$ session s1, gv$ lock l2, gv$ session s2, s3 in v$ sql

  where s1.sid = l1.sid

  and s2.sid = l2.sid

  and l1.block = 1

  and l2.request > 0

  and l1.id1 = l2.id1

  and l2.id2 = l2.id2

  and s2.sql_id = s3.sql_id;

  Please check it's going to kill the right process?

  Thank you very much

  zxy

  yxes2013 wrote:

  It will be biased if I have my own QA script

  You should do the QA, and you can also use it for your future blocking issues

  Thank you

  It is my QA then to deploy it to Production & let us know the results.

• What are the reasons for blocking a thread?

  There is a question in the PL/SQL forum, that as is often the case, is not to the point. I asked for more information, and the OP provided. Now, I know what the OP really intends to ask, and I can answer.
  
  Or at least I could answer, except that the thread is now locked: ' this thread is locked - replies are not allowed. " According to the FAQ, this means that a moderator has locked the question. But why? Why block this issue and not the other threads of the same buggy? If the lock is due to an offence on the part of the OP, why not just delete?
  
  In short, why hang on to a question without a question? Is it zap and slightly reduce noise in the forum, or unblock and allow for a response.
  
  At the very least, a policy of blocking issues without apparent reason or explanation undermines the role of contributors.
  
  Cheers, APC
  
  P.S. [url https://forums.oracle.com/forums/message.jspa?messageID=10025314#10025314] here's the thread in question. OkF
  
  ---------
  
  Follow-up: I noticed that the user has at least another locked thread. So maybe there's something in their behavior that deserves imprisonment? But they have other threads that are still open. So, my main point remains valid: what are the reasons for blocking a thread? Why not just ban the userf and or delete questions?
  
  Published by: APC on December 11, 2011 16:48

  Gasparotto N wrote:
  I see, but as Andrew said, there is no evidence in the taken only a single thread without going through the history of the user all the.

  Nicolas.

  Agreed. If I block a thread, then I often put a message to say I'm locking it and the reason why and possibly a link to other threads of the same question if it's because of the duplication of the op.
  It is not that often that I have lock son well.

• 10.2 exasperating IOS - cannot get rid of lock screen notifications or phone calls end

  Hi all

  I hate the new update!  Mainly due to the following question: my lock screen insists to show me the notifications I don't want - next Up, showing what I then in my diary, the Siri app suggestions and news.  I thought it would be simple to disable in the settings, BUT it does not work!  In my settings, news notifications are turned off completely, but still they appear (and Yes, I tried turning market!)  I have no interest in the next place, and cannot turn off anyone.  The Siri is ok - little useful and the same as what was there.

  The other issue particularly infuriating is that the block of additional notifications to the wide space on the phone's screen and I can't see what I'm doing.  In particular, if I'm on a call for long enough for the kick lock screen, for me to put an end to the appeal that I need move these notifications in the way that, slide or press the home button, which takes time. I do not understand why this is happening - surely if you are on a call the lock screen shouldn't come?

  So 2 questions: 1. How can I remove the undesirable elements of the lock screen and 2. How can I prevent the lock screen suddenly to avoid end me a call

  Thank you very much!

  Let's first answer the simple question:

  Clairelfc wrote:

  In particular, if I'm on a call for long enough for the kick lock screen, for me to put an end to the appeal that I need move these notifications in the way that, slide or press the home button, which takes time.

  This is not correct.  To complete a call, you can simply press the sleep/wake button!

  Regarding then until the next, etc...

  Simply scroll to the bottom of the screen (that starts with 'To the top next' and click on change it.)  Then, you can move or delete what you want.

• Spectrum 13D-3000: Sound LED (F11 key) does not work on Windows 10 1607

  Hello!

  After the upgrade to Windows 10 1607, I have a problem with the sound led (F11 key).

  It is now always red even if I turn on the sound (by pressing fn + f11 key) or by turning on the sound in the Windows menu.

  Before updating the LED becomes white when I turn on the sound. IDT Reinstaling driver did not help. What can you recommend to solve this problem?

  Thank you!

  Mykyta salvation,

  Thank you for your answer!

  The issue started after a recent update of Windows 10? If Yes, then I suggest a System Restore to before that point and see if the problem is resolved. Then, you can block the particular Windows 10 update does not happen. How to temporarily prevent a reinstallation of Windows 10 driver update.

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that this post helps!