Blocking issues, of sleep and extended Vista

Similar Questions

• sleep and extended problem solved!

  Hi all.
  Finally I solved my problem (see "sleep and extended in windows XP" for more details).
  I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

  Now I understand why the HP software does not work properly, you know?

  See you soon.

  Gianluca

  It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

  But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

  Hans Bye

• Sleep and extended in Windows XP

  My computer will not sleep or hibernation any more (maybe if I installed a HP psc). I want to know why.
  Thank you
  HP psc = HP printer Scanner Copier

  [Edited by: admin on 16/09/04]

  Do you know how can I restore the stand-by and extended functions?

• HP Pavilion x 360: back issues of sleep and stop; MEI driver moved

  I have upgraded to Windows 10 last summer and, like many people, I had sleep and close issues. The computer wouldn't wake him up after he went to sleep and when I stop the computer the light remained on and the fan will continue running. I was able to fix by updating the graphics card and the driver of MEI.

  Windows has released a new update a few days ago and it has been applied automatically to my computer. Now, sleep and shutdown questions have returned.  This time, the graphics card is fully updated, but now I can't downgrade my MEI driver back to version 8.1 of Windows ( 9.5.24.1790 1.5 M ). When I try to install the driver it says 'Setup progam was able to start one or more application processes' and stops. I tried running the installation through Setup of HP and download directly, and none worked.

  Does anyone else have this problem? Any advice?

  Open Device Manager, expand the 'System devices' section, and then find "Intel Management Engine interface", double click it and go to the driver tab, and then click on "roll back driver" button, it will come back to the previous driver.

  You can do most any device in the device manager driver.

  If roll back driver button is gray, then there is no older driver to restore.

• Sleep and extended modes disappeared!

  Hello! All of a sudden, the sleep and hibernation modes have disappeared: the options are then to stop, but they can not be selected. In addition, the "sleep mode" does not activate when I close the lid of the computer (even though I already checked in the options it is supposed to do). I hope someone can help with this!

  @jessnoun...

  Found this...

  "Vgasave is that Windows uses when the graphics driver is not present or does not work, or in Safe Mode." Go to the Device Manager and check the status of your graphics card and also check hard goods that could conflict with display usually under 'other devices' or 'Unknown devices' if present. Remember that you have the latest driver from the manufacturer's support Web site. »

  Source-> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/vgasave-is-killing-me/2fe723...

  Try it...

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Mode-exit sleep and extended

  Hello
  When my Qosmio X 500 - 10W (windows 7 x 64) is in standby or hibernation mode, I can't on the mode 'sleep' or hibernation mode.
  Please, what is the procedure?
  Thank you for your response.

  Have you ever tried to wake up your laptop? How?

• Sleep and extended booklet

  My libretto U100 wake up after going to standby or hibernation. If anyone else has had this problem and if so any suggestion on how to fix?

  Any help would be appreciated.

  Hi Anthony

  I checked all the options on my friends book and everything works fine. I also checked all the options of the electric tool under the Action of Setup (manual configuration) tab.

  Your device comes pre-installed with a Toshiba recovery media?
  Try to remove the tool and install it again.

• Sleep/wake extended options greyed out

  I have a HP Compaq Presario CQ61 - Windows 7 64 bit. My sleep and hibernate options in the start menu are grayed out. I thought it was a problem with my video card, and when I go into Device Manager there is a yellow bang next to my called Mobile Intel (r) 4 Series Express Chipset Family display adapter and below it is written: this device cannot find enough free resources that it can use. (Code 12)  If you want to use this device, you will need to disable one of the other devices on this system. I tried to update the display adapter according to HP I have the latest driver, so I have no idea what to do? My laptop used to have installed vista, but my hard drive failed, I got a new one installed with Windows 7 and since I got Windows 7, this problem occurred. Help would be much appreciated!

  [Moved from comments]

  Hi Sam,

  A power plan is a collection of hardware settings and system that manages how your computer uses and conserves energy. Power management can save energy, maximize system performance, or balance conservation of energy with performance.

  Let us try these methods.

  Method 1.

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  Open the power Troubleshooter: http://windows.microsoft.com/en-in/windows7/open-the-power-troubleshooter

  Method 2.

  You can create a new power plan and check if that helps.

  Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-in/windows7/change-create-or-delete-a-power-plan-scheme

  Additional information.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-in/windows7/power-plans-frequently-asked-questions

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-in/windows7/sleep-and-hibernation-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Sleep and Hibernate works not properly

  Hello
  I have a laptop HP running Win7 64 bit which has developed a problem when you use power-saving features and ensures extended. I rarely stop or restart the system and very rarely use Hibernate, opting instead for simply use sleep function when I close the lid. Stop and restart both to perform as expected, but whenever I try to use the sleep function, either by closing the lid or via the options on the start menu, simply, the screen goes black and the laptop runs - the fan is on and the hard drive light flashes sometimes. I waited for about ten minutes, but nothing changes. Then, when I lift the lid to wake the system, nothing happens and I have to do a closed hard. The same thing happens with the Hibernate.

  I used the system restore already to try to resolve, by choosing a restore point, a few days before the recent updates or system changes, I did but the problem remains.

  I also changed the settings in the power settings to try to solve the problem, but once again failed to do.

  I turned it off Hibernation using start, run, powercfg-h off but once again, this has not fixed the problem. >

  Any advice greatly appreciated.

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  =======================================================

  If necessary after trying the above, (this won't help if all settings are always wrong).

  Try a repair Installation which should allow you to maintain programs and the same data if
  redundant backups are always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to activate the sleep and Hibernate functions?

  

  I think the image to explain my problem!

  Hello

  This should help you.

  "Sleep and extended: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  See you soon.

• Windows Vista goes to sleep and then wakes up immediately at the login screen

  Original title: sleep function appears just right back to the login screen

  When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

  I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

  -HE'S

  When I use the sleep function on Windows Vista (the switch icon to the left of the lock in the start menu), the system go to the start screen, but a few seconds later, the computer comes back, says "Recovery Windows" and then displays the password login screen.

  I scanned the computer many times for viruses (using McAfee), but found nothing.  Is there a way to tell the computer to sleep and have it actually do?

  -HE'S

  See if the following can help you...
  Start button > Panel > Classic view > Power Options > click on change power settings > click on advanced editing powersettings > scroll down until you see Miltimedia parameters, click the plus sign (+) sign in front of > again once, click the (+) sign sign in front when media sharing > on battery shoud read " allow the computer to sleep ".
                                                   Sector should read " allow the computer to sleep ".
  If they aren't, it must 'prevent the idling to sleep' or 'allow the computer switch to Away mode. Click on it, you should see a pointer on the far right, click on it and select allow the computer to sleep.
  Click OK when finished.

  t-4-2

• Satellite P300-h-13 is not waking up from sleep and hibernation

  My laptop (Windows Vista 32 bit) cannot wake up from its sleep or hibernation.
  Laptop is on the mode of feeding.

  However, once the screen is off (after 10 minutes), I am unable to wake up.
  Cannot open the the Task Manager, Shut Down, nothing works, I see is a black screen, the disc access light flashing and the fan is running.

  I find myself holding down the power button to turn off.
  This is a recent development, it had to start when I installed Office 2010 on the laptop.

  Any suggestions?

  Hello

  Since when did you notice this problem?
  This issue was present after the installation of the system clean?

  What is the BIOS? Is up to date?
  I read in a few discussions setting the BIOS update can help with these similar problems.
  So the update of the BIOS is definitely worth a try.

  Also update the display driver would be recommended. Of course just in case you do not use the latest version.

  By the way: Win 7 isn't an option for you? Windows 7 is a lot better and a lot of different issues that appeared in the Vista system, have been smeared in Win 7

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Problems with sleep and stopped after upgrade to Windows 10

  Hello

  So I'm going to sleep problems and stop once I have upgraded to Windows 10 laptop won't sleep or stop correctly. The screen turns off, but the power LED remains lit and fan as well. If I chose the sleep he wakes up little matter what I try, and I have to make a hard stop at every time.

  Any solution to this problem?

  Thank you.

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG