blocks - no record capacity CS6

Similar Questions

• The assignment of value to the block multi-record in Oracle's 10 g

  Hi all

  I'm new to form of Oracle 10 g.

  I have a block of several recording that does not rely on the database. I need to assign the value to this block multi-record dynamically the ref cursor.

  I'm trying to set the value as below, but its does not work. Please help me on this.

  loop
       fetch cur Into screenval_rec ;
        exit when cur%notfound ;
        first_record;
     
    :BLOCK1.COL1:= screenval_rec.value1;
      :BLOCK1.COL2 := screenval_rec.value2;
      :BLOCK1.COL3:= screenval_rec.valu3;
    
       next_record;
  End loop;
  
  

  Kind regards

  REDA

  Hi Craig,.

  Thank you for your information.

  But I found the exact cause of this "Invalid cursor error' (ORA-01001) in Oracle forms. It is because of the unique enclosed in quotes the select statement of the REF cursor. I found in the paragraphs below Oracle.

  Note 170881.1 - ORA-1001 calling a stored procedure that contains a REF Cursor Oracle Forms

  Once I deleted the quotes, it's working properly now.

  Thanks again for your help.

  Kind regards

  REDA

• navigation block multi-record question

  Hello
  
  I have a block multi-record with 4 fields in each record. Each field has a LOV attached to it. When I select a value from the LOV to the 1st field, the 'control' should go to the next field (ie., the slider should move to the 2nd field).
  
  How can I do this?
  
  Thank you
  Chiru

  No need for any trigger, set the automatic 'Skip' property for the LoV to 'yes '.

• Recording capacity for ASA firewall using ASA-SSM-20 IPS module.

  Hello

  Please could someone give some tips on how to get the ASA-SSM-20 to record information about something like Kiwi Syslog services etc. We just need to get the IPS alerts to generate the SMS/email feature to alert the various intervention teams.

  Thank you

  unfortantely, no syslog support

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807335ca.shtml

  You can configure rules to send snmp traps, and you can pull events using CETS, IPS Manager Express and Cisco.

  If you have logging enabled on the ASA a syslog msg appears when the IPS is asking or blocking traffic.

  Here is a link to IPS configuration guides

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/tsd_products_support_configure.html

• disable unused records block several record

  Forms [64 Bit] Version 11.1.2.1.0

  I have a block of several record based on a table. The State of block properties, it can display a maximum of 5 items on screen, the only item in the block is an image placeholder, which of course is filled with images on execute_query.

  My requirement is that if the query returns only the 3 images for example, I want to disable/hide the remaining 2 placeholders.

  Is there a trigger that is fired once after the sql operation is over and all the records are retrieved? If so I could loop through the elements of the code block and disable those that are not met. I couldn't find the correct trigger however. After query fires after every record, rather than at the end of the full extraction.

  If this is not the way to do it, someone at - it any other suggestions?

  Thanks in advance.

  I don't think that there is a non-transactional trigger that triggers once the query is executed.

  I assume that you have coded a built-in execute_query somewhere in your form (I guess in the outbreak of the exeqry key). The place for what you want is just after the integrated execute_query

  There you can see get_block_property QUERY_HITS and do everything that you want to hide the uninhabited element instances.

• How do 'Loop recording' in CS6

  I can find how define 'Loop while recording' (salt or view) that was available in CS3 by right clicking the record button.

  I tried setting the 'repeat' has no effect when you are recording a track.

  CurrentY when I press the record button it starts recording of the selected range in the track then STOPS.

  He did not return to the beginning and continue to record another file.

  I need to record streaming multiple files in a selected range.

  for example my vocal booth is on l ' of the piece that is on the computer.

  When I got CS3 it's simple record five takes both in a loop of record.

  WHAT ME MISSING HERE?

  @Ronin: I can't help but notice most, if not all of your answers state: "..." Search for an alternative DAW'. I guess Adobe should rename hearing to "Adobe Audition for TV/Radio, but no music CCXX.

  I now regret having upgraded from CS3 to CS6.

  The main part of "Loop recording while' must be hands free. for example save 5 solo lead in a loop for you can choose the one that suits. The ability to not touch the mouse or keyboard to reset the record button while your having a guitar in your hands is very useful. Why anyone would remove it is beyond me.

  Do not 'Loop while recording' confused with loops (repeat structure). Your suggestion of copy and paste is not what we are talking about here.

  I'll never RENT hearing on the cloud, so my only solution is to pester "Apple" out a Windows version of 'Pro Logic' (if all goes well for $200 or less) that take advantage of the Mac user (no rent for life, but you admit it).

• Flash block Builder, Flash Professional CS6 save

  Hello

  I use Flash Builder 4.7 and Flash Professional CS6 game development. When I save a file action script in Flash Builder, it sometimes blocks Flash CS6. It happens several times a day and it's really annoying. I'm working on iMac with Mac OS X 10.9.1. I also checked that I have installed all available updates.

  Please tell me how to solve this problem,

  Concerning

  Here are some things that help me:

  • Open the Flash version I want to use to compile the project first
  • Stop automatically build the project and use Ctrl-B instead of this, so you are compiling just when it makes sense for you, rather than each change.
  • Active sharing libraries can cause outages during "update of assets", so avoid them if you can. If you really need them, open the file in Flash before you try to publish from FB.

• 'Image' of block multi-record element type

  If I have a block of several record with a type of picture element, is it possible to load only / display an image for some of the records on a datablock? It seems that "READ_IMAGE_FILE" still applies to the whole element, which is responsible for the image for all records in the block... I can't find anything that will load only the image of a certain recording that I said... Something as sort of 'SET_ITEM_INSTANCE_PROPERTY' where I can put the record number I want the image to display on. Such a thing exists?
  
  Thank you!

  If the item of the Image is based on a BLOB column, you can escape to the population of the order of the day. I see no work around. It's like you ask a record, but do not want to display the content of the column.

  François

• Block multi Record

  Hello
  
  I have a block of several record and under certain conditions, I would disable lines that statisfies the condition
  
  I will check that the trigger in a TIMES NEW BLOCK INSTANCE.
  
  The problem is SET_ITEM_INSTANCE_PROPERTY it is an attribute of current_record, but do not know how to assign the condition current_record as the condition returns some value can only turn off the lines.
  
  Could someone help?
  
  Concerning

  Transfer your logic of an once - instance trigger new - block to a trigger after query on your block "block":

  IF: block.item = "SAVE" THEN
  SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_FALSE);
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_TRUE);
  END IF;

  But INSERT_ALLOWED no sense that the record exists, perhaps you mean UPDATE_ALLOWED?

• Records Illustrator CS6 crashing when recording

  I tried to reset the preferences, reinstall the application from scratch. I am able to function properly in another windows profile, but I really don't want to rebuild if I can avoid it. This is the accident report.

  Name of the failing application: Illustrator.exe, version: 16.0.0.682, time stamp: 0x4f6e762b

  Name of the failed module: AGM.dll, version: 4.26.20.19822, time stamp: 0x4f56925c

  Exception code: 0xc0000005

  Offset: 0x0024ed0b

  ID of the process failed: 0x1b48

  Start time of application vulnerabilities: 0x01d18b807c1653de

  The failing application path: C:\Program Files (x 86) \Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe

  Path of the failing module: C:\Program Files (x 86) \Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\AGM.dll

  Report ID: 0902c1cf-f774-11e5-8e75-f8b156d1a062

  A printer is installed, implemented and enabled?

• Preserving layers during the recording of CS6 to CS3

  Absolute novice Hi guys here in what concerns CS, but I need to open a file in CS6 which has several layers, working in the file, save it, then someone else can open in CS3 and rework on the layers.

  When you open the image in CS3, it seems to have lost all its layers... am I missing a step somewhere in order to preserve the layers in some way?

  Thanks for any help

  STUK,

  You should always save a copy in CS3 format (appears in the format options) in order to ensure the best possible handling, since you're downsaving to an earlier format.

  Some things may not be the same in all cases.

  But it is possible to keep the layers, of course.

• Need advice: mixer-> PC for recording hearing CS6

  I'm sure this question has been asked here, but I don't find that. I have a mixer Mackie 24 ch with SUB 1 & 2 set up to send a stereo mix to a new PC, I buiilt (i5 Quad Core, 16 GB ram, multiple disks, blah blah blah). Now, I discovered that the Line In on the Mobo is beyond cheesy, cycling buzz adds to the mix is quite comical. What is a better way to capture sound on the PC? USB audio interface? High-end sound card? I know that the output of the map is very well, I have been recording in the Tascam DR100 MKII new for several months and the sound is outrageous. That may be the answer, just take audio this way and pop the SD card into the PC and all right. But if I wanted to send stereo audio directly to the hearing, which is a good way to go? I would like to capture at 24 bits and 96K would be nice but 44.1 K is probably fine.

  Thank you!

  Usually the Focusrite products work very well with the hearing, but I would not take an individual, because it is only USB 1.1, and so rather a slow Communicator, especially at 96 k, even if capture at this rate is a waste of time and space on your HD ideally you want a similar device, only with a specification of the USB2.

  Almost certainly a better bet, with regard to the Focusrite products, would be to get this one.

• Can I block the recording of video Clips?

  I have video clips (MOV files) on a website that the icons of a PDF file I built can bind to and open (to clarify: the icons are actually just virtual boxes around the icon images that were in the Word doc where it was built). Generally, the MOV files open in a web page (which is quite good), and the user can right click on them and keep them (that's bad). Note: my default browser is Foxfire.

  However, I notice that if I have MS Internet Explorer open (but only if I actually open), the MOV files open in their own window Quicktime (good!), and the user cannot click on them and save them (great!). Is there a way I can force this desired behavior when I build the PDF?

  (Note that the consumers of the PDF will it reside on their local computer.)

  Thanks for your help!

  The only way to prevent a video to be saved locally is to broadcast using a negotiated protocol and a video streaming software on the server (Adobe Media Server, etc.). Any static file on an http (web) server will be downloaded to the hard disk of the user in order to play, regardless of the format or what application he plays. Whenever you play a video remotely in Acrobat or Adobe Reader, the user will display a security command prompt list the URL of the video file, so it is trivial for the user to copy.

  PDF files created in Acrobat 9 and later versions include the readers that are integrated for videos that are hosted online, including the files delivered through streaming servers (URL starting with rtmp or rtmpe), but the implementation of the server is expensive.

• Number of records in a block

  I need to know if a block contains records to activate a button to run a process.
  I tried to use something like this:
  
  declare
  Number of the CNT: = 1;
  Start
  go_block ('my_block');
  premier_enregistrement;
  
  While: system.last_record = "FALSE".
  loop
  CNT: = cnt + 1;
  next_record;
  end loop;
  
  : ANOTHER_BLOCK. RECCOUNT: = cnt; -will hold the number of records
  
  end;
  
  I put this code in a WHEN-VALIDATE-ITEM trigger to activate the button immediately the user types in a record (MY_BLOCK has only a single element)
  But I get this message: Illegal procedure GO_BLOCK limited in...
  I removed call GO_BLOCK and get: illegal procedure NEXT_RECORD limited in...
  and so on.
  
  Maybe I need to use another type of code or should use this code in another trigger this effect.
  
  Is it possible to do? Please advice
  
  Thanks in advance
  Oscar

  Another solution:
  On your block when you enter a date, create a second hidden digital field. In the trigger of the ORGANISATION to the date, if the date is not null, the numeric value of 1. Otherwise, set it to zero or null. (Lower...)

  In a control block, create a hidden numeric field, with its method of calculation set to summary, summary = sum function, summarizes block & element to the digital element hidden in your block to date.

  In the WVI trigger above: after you set the value of the number hidden in one or zero, check the value of digital field hidden control block. If it is > 0 and your button is not enabled, set it to enabled. If value = 0 and the button is enabled, set NOT active.

• 2 colors on several block record

  How 2 color block multi-record without external tool. IM using devsuite10g R2.
  
  
  for example:
  1. each same white = datarowrecord;
  2. each odd gray = datarowrecord;
  
  It is im going to make loop? and call the Visual attribute 2 to paint in each multirecord base on the MOD function?
  
  in the powerscript code > > is something like this: if (currentrow () = getrow(), 65535, if (mod (getrow (), 2) = 0, 79741120, rgb (255,255,255)))
  
  TNX...

  Yes, you can do it by using a java bean. Take this as a starting point:

  The java code

  package forms;
  import java.awt.Color;
  import oracle.forms.ui.VTextField;
  import oracle.forms.properties.ID;
  
  public class CField  extends VTextField
  {
    public static final ID ODDROW   =ID.registerProperty("ODDROW");
    public static final ID EVENROW  =ID.registerProperty("EVENROW");
  
    private static final Color m_oddColor=Color.YELLOW;
    private static final Color m_evenColor=Color.RED;
  
    public boolean setProperty(ID id, Object value)
    {
      if (id==ODDROW)
      {
        setBackground(m_oddColor);
        return true;
      } else if (id==EVENROW)
      {
        setBackground(m_evenColor);
        return true;
      } else
      {
        return super.setProperty(id, value);
      }
    }
  
  }
  

  Build an a pot of this code and add the jar to your archive or archive_jini-tag in the formsweb.cfg

  In your form, set the class of implementation to "Forms. CField' for all elements of text in your building.

  Create this procedure in your form

  PROCEDURE PR_COLOR_BLOCK(i_vcBlock IN VARCHAR2) IS
    nRowsDisplayed NUMBER:=GET_BLOCK_PROPERTY(i_vcBlock, RECORDS_DISPLAYED);
    bOdd           BOOLEAN:=TRUE;
    vcProperty     VARCHAR2(10);
    vcItem         VARCHAR2(61);
  BEGIN
    FOR i IN 1..nRowsDisplayed LOOP
      IF bOdd THEN
        vcProperty:='ODDROW';
      ELSE
        vcProperty:='EVENROW';
      END IF;
      bOdd:=NOT bOdd;
      vcItem:=GET_BLOCK_PROPERTY(i_vcBlock, FIRST_ITEM);
      LOOP
        EXIT WHEN vcItem IS NULL;
        SET_CUSTOM_PROPERTY(i_vcBlock || '.' || vcItem, i, vcProperty, '.');
        vcItem:=GET_ITEM_PROPERTY(i_vcBlock || '.' ||vcItem, NEXTITEM);
      END LOOP;
    END LOOP;
  END;
  

  Call the procedure in the WHEN-NEW-FORM-INSTANCE-trigger.

  For other types of items, such as checkboxes and Poplists, you write according to classes. Also, if you want to change the color when scrolling, you will need some other encoding.