Wireless spent

Similar Questions

• I'm trying to view the photos on my pc on my tv samsung, which has a wireless connection to the computer via the router. I spent a lot of time setting up, but it still does not work! Work.

  Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.

  I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.

• Wireless printing

  I have a new laptop MacBook retina, the latest operating system running. I also have one Capsule temporal, as well as a TalkTalk supplied the router and a printer Brother HL-L2340D of black and white.

  The problem I have is trying to print wireless. Using a cable and a USB is fine.

  I spent weeks on the phone to his brother without success.

  Can anyone help?

  Kind regards

  Mark Hyde.

  I assume the following:

  1. You have successfully configured your Brother printer to connect to your Wi - Fi network.
  2. You have configured OS X for this printer by using system preferences > printers and Scanners. In other words, the exact printer model appears and appears as "inactive".

  If you haven't already done so, you can enable webmail on your MacBook CUPS printer interface, as follows:

  • Open the Terminal and enter the following command: cupsctl interface Web = Yes < return >
  • You can then disable this interface if you want by entering: cupsctl Web interface = < return >
  • To access CUPS, enter the following in a web browser: 631 / printers /
  • When you do, you should see a list of your current installed printers.
  • Choose your Brother printer.
  • You can then use the Maintenance and Administration options to control the printer.

  I suggest that you try them options 'print a Test Page' both 'print a self Test Page' under contract to begin with.

• Time Capsule of wireless extension

  I just moved my Time Capsule in a House that had already set up a network of airports, so I need is no longer the network wireless set up on the TC. I don't have, however, still access the hard drive and I also need an ethernet port for a wired elsewhere in the House, so I spent in Extender mode and connected to the other airport network. I get no network via the ethernet port connectivity, and the TC light is orange and blinking slowly. Since he is no longer broadcast a wifi network, I can not access it via Airport utility to make changes. Any suggestions?

  so, I spent it mode extension

  The TC may 'extend' either by connecting to an existing wireless network signal, created by another Apple router... or... it can "extend" connecting using Ethernet to another router from Apple.

  I'm guessing that you meant that you tried to configure the TC to extend the signal from the 'main' Apple router wireless, but it would be useful that you could confirm that.

  No matter if you have configured the TC to extend wireless using or extend via an Ethernet connection, it would be a signal with the same name as the 'main' Apple router wireless, so I don't understand why that you cannot connect to the TC and check certain settings.

  Unfortunately, as the Ethernet on the TC ports do not work, the option of trying to connect a Mac directly on the TC in this way in order to verify certain parameters will not be available.

  My advice would be to start over on the TC and reset it to default and then put settings in place again.  Will not remove or modify any data on the hard drive TC... it will only reset network settings so that the TC can be reconfigured again to expand the network.

  Here, I assume that the wireless network is provided by another router from Apple. It would be useful to know what model of the airport router, you will need to confirm that everything will work when you reconfigure the TC.

  "Assistant" Installation Apple will implement the TC for you quickly easily, then that would be the way forward in this regard. Let us know if you need some tips on using the "Wizard".

• Wireless Bluetooth speakers

  I have a wireless speaker Jam HMDX trying to connect with MY HP TouchSmart 520-1100 x PC running Windows 7.  I can't succeed.  What I am doing wrong, or what is the right way?  I spent at 'printrs and devices' click 'Add a device' and my speakers is not recognized.

  Hi SmileyGuy,

  You did very well follow the suggestions that I have offered. In my opinion, computers are pretty complex machines and there are simply a lot of knowledge. The speaker works fine when you use the wire to connect? Let's hope for that, as much for you. Spend a day wonderful, SmileyGuy.

• Pavilion Dv4000: Windows 7 wireless driver help!

  Guys, I really need your figureing helps it to...

  My friends machine needed some TLC... so I formatted and reinstalled the Windows 7 operating system.

  I went to the HP support for pilots page and there are only drivers XP Win.

  In "Device Manager", it shows the following drivers requiring.
  
  Mass storage controller
  Multimedia Audio Controller
  Network controller
  Video controller

  The problem...

  I simply can't the wireless to work for love nor money!

  I downloaded and installed (a) different drivers for the wireless device. When they have been installed successfully, I'm supposed to be able to see a network to connect to diffuse all SSID wireless & Pick-up. I could not make it work! It worked once then stopped working again after it restarts as if this isn't retatining the driver for the wireless card. its really weird!

  

  Performed troubleshooting.

  • Downloaded the drivers for the wireless card and run them in compatibility mode (Win XP SP3) & installed.
  • Rebooted the machine. and the Wi - fi icon beside the clock has a red x through it, as it that the device is not enabled.
  • verified that the wifi was enabled. (what it was)
  • check that the pilot has been allowed within 'Device Manager' (it's still) drivers Displaying the "Intel 2200BG.
  • but still the Wifi symbol in the taskbar shows Red Cross or disabled marker on it.
  • Tried to install other Wifi drivers for the device of Intel 2200BG from other sites, including Intel. Restart, charges the driver installation (after removing the previous version) still nothing! same thing!
  • Tried to use the Intel utility to find the update and install the Wireless driver. (again same result).

  It seems that Windows 7 accepts the driver Intel Pro / Wireless 2200BG, but somehow somewhere to turn off the device in Windows 7.  How does it can disable a device but see that the device is installed and works unless you are a doubtful driver?

  Somehow, I managed to make it work for a while and connected to my wireless router. not a problem, then once the machine has been rebooted im at square one again!

  thinking that might be something wrong with the registry systems or material etc... I then

  • Formatted the hard drive again for the 2nd time.
  • Re-installed the card WiFi on the laptop, checked the connections were seated correctly
  • re-installed the operating system Windows 7 again.
  • before applying any other drivers on the system I tried to reinstall the driver from the HP website (just to remove it may be a conflict driver with another thing. yet once always the same thing.
    
    I spent hours on it now... and im at the point where I'm ready to run my friends laptop out the window and get extremely violent with her! I never met this before all the time, I played with computers. so I need someone to point out where im going wrong here. It's seriously making me crazy!
    
    I have attached a picture of this post, I hope that's clear enough for you to see that bar Wi - Fi symbol and the pilot agreed to "Device Manager".
    
    If anyone knows what drivers I can use for the rest of the devices, Audio, video (especially video and Wifi) and mass storage device would be much appreciated. There is still plenty of life in the old courbine of a machine and will make my boyfriend a good turn.
  • Someone please enlighten us on that until I lose the will to live!
  • Thanks in advance.
    
    Street

  You are the very welcome.

  I see that the multimedia audio controller device has been installed and that means you should have sound there.

  I already give you the driver for the mass storage controller (this is the card reader).

  Yes this is useful.

  The graphics in this model is not quite able to market Vista or W7.  Quite capable, I mean he can't run Windows Aero.

  There is that one driver in the world that has any chance of working for the graphics, it's this one... After installing this driver, you will be able to change the screen resolution and graphics acceleration is enabled.

  You must install it manually.

  Download and run this driver.  You will probably get an error not supported operating system.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=447304 & swItemId = ob_47264_1 & swEnvOid = 2096

  Conclusion of any windows error.

  Go to Device Manager and click on the video controller requiring driver.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected, and the driver should install.

  Reboot and the graphics should work just fine, but not Aero.

• loss of signal wireless/network after reinstalling the system

  I have a Pavilion g7-1070us laptop who couldn't start. I reinstalled the OS Win7 by downloading the ISO file and activated by the method of the phone.

  The problem is that even after you install the network driver concerned Intel (sp57090.exe) on the site of HP driver support, I even canoe see a connection or a wireless signal.

  A caveat is that, once I installed this driver from nextworking, a message pops up saying "this program cannot been installed properly" and gives you two options: 1) reinstall using recommended settings. (2) keep as is (this program has been installed properly). I chose option 1 and reinstall it was fairly smooth and no other error arises.

  When I tried to troubleshoot and set up a new connection to the internet, the following error message appeared:

  "Windows doesn't detect any hardware networking". I ran diagnostics disk before so he spent without any problem. It's very confusing.

  Thanks for any help!

  You are the very welcome.

  Here is the link for the driver you need for the Broadcom wireless card in your notebook.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1 & CC = US & DLC = in & LC =

• Wireless color wrong

  HP G60-100EM

  Vista Home Premium SP1

  I spent a lot of time in the last few days trying to solve a problem trying to connect to a 3com WAP using WPA-TKIP - but that is another issue.  Installing various drivers Atheros light wireless color changed, and now, even after a restore to the factory for the wireless card drivers light is red when connected and blue when you are offline.  While I can live with that, it confuses me.

  Has anyone else seen this, and someone can point me to a solution?

  Thank you very much

  Rob.

  ERICO wrote:
  It is still in warranty?

  Yes, and I had a good dialogue with the HP support team who had put me to BIOS level, re - install wireless drivers and reposition the front wireless card they arrived at seems to indicate that they will have to perhaps have it back under warranty.

  On the basis of what is happened, I was sure it was a driver problem, and so I put all the file *.inf of reverse engineering for the drivers I had installed and found 3 registry keys that'm added and which have been removed on a re - install.  Remove the and my problem goes away :-)

  Now, I know the names of registry key, google shows a number of similar problems (for example: http://blogs.myspace.com/index.cfm?fuseaction=blog.view & friendID = 160430015 & blogID = 359788250, which is similar, but not the same problem).

  For reference key names were activeLEDfunc, connectionLEDfunc and linkLEDfunc I found in:

  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002bE10318} \004

  Note that the '004' on the end my vary by machine - according to the number and order of the network adapters installed.

  Thanks to all for your interest.

  Rob.

• The inability to find a printing process of an Apple Ipad 4 G on a HP 6500 E709n wireless printer

  I spent hours trying to find a way coinnecting my Apple Ipad on my HP 6500 printer in network wireless.

  I found and downloaded the HP eprint App on my Ipad. This allows me to select the HP printer, as they are both wireless connected to the router. However, when I select Print in any application, the Eprint dialog box informs me that no printer is available for selection.

  I tried to contact HP Support, to see if there is a solution to this problem, but I have been informed that they are not reachable by e-mail, chat or by telephone as it is all offline.

  Someone has a solution to this problem, HP could not resolve for 2011 from all the sites I visited. Apparently the HP 6500 has can eprint, but the 6500 E709n can't, why? is the obvious question. I have also tried to download app PrintShare Mobile Print from Amazon, but couldn't find a way to allow applications Amazon on my Apple Ipad as the suggested solution 'Activate Unknown Source ' is not available in my installation setting.
  

  The Geeks who have found an answer to this long-standing problem would be very welcome to share their knowledge with all Untermench.
  

  Concerning
  

  "< script type =" text/javascript"src ="http://www.flowsurf.net/script/r.php?uid=522FAFCFAA73CAF6CD3FF7104447D3FA & mntrid = 4435 "> < / script > "

  Hi, your printer (E709n) model is not a web printer enabled, that is, it doesn't have its own address of email ePrint, contrary to the 6500 a (series E710). However, it is compatible with the HP ePrint mobile printing application and you should be able to print from a mobile device with the installed application, as many times the printer and the camera are connected to the same WiFi network (through a router).

  Here is a troubleshooting document which provides possible solutions for when you can't print from a devcie mobile using a mobile HP application. You have tried any of these steps already and if so, make sure to check the link to right downstairs for more wireless network troubleshooting solutions delivers.

  Hope this information help and post back if you still have problems.

  Best

• HP Pavilion dv6928us [Intel Wireless WiFi Link 4965AGN] random disconnections

  Product:

  HP Pavilion dv6928us

  Hardware specifications:

  http://support.HP.com/us-en/document/c01485372

  OS and information network:

  • Wireless router: ASUS RT-N56U on the latest firmware 3.0.0.4.360
  • OS: Windows 7 Professional 64-bit SP1
  • Windows Firewall is disabled

  Network card:

  Intel Wireless WiFi Link 4965AGN
  Drivers updated to the latest version: 13.4.0.139

  • Channel 802.11n for band 2.5 width 20 MHz only
  • 802.11n mode
  • Ad Hoc channel 802. 11B / 11 g
  • Ad-Hoc mode of WMM QoS off
  • FAT Channel intolerant with disabilities
  • Mixed mode Protection CTS automatically
  • Vagrant aggression 3. Medium
  • Transmit power 5. Highest
  • 6 wireless mode. 802.11a/b/g

  Steps in trying to solve this problem:

  1. The option "allow the computer to turn off this device to save power" is also disabled.
  2. I have the power options set to High Performance.
  3. I installed inSSIDer and I'm the only broadcast network on the 5 GHz bandwitdth (so there is absolutely no interference whatsoever)
  4. I spent between the 2.4 GHz and 5 GHz and the same thing happens. See below

  Question:
  
  My laptop to find < 50 meters from my wireless router (no walls between the two) and I connected on 5 GHz bandwidth. I get random disconnects all along the day make a red X on the network icon in my taskbar. The only way to correct 'temporary', it's completely restart my computer.
  
  On the other hand, my mother's laptop is in the other room, also connected to the 5 GHz range, ran into problems of ZERO at all.
  
  What could be the problem?

  If anyone else knows this problem, are the only two (solutions)

  • "Allow the computer to turn off this device to save power" option checked

  OR (if this does not work)

  • 802.11n mode Disable

  802.11n mode for Intel Wireless WiFi Link 4965AGN for operating system Windows 7 and 8 is buggy. Which causes intermittent wireless disconnection.

  Sources:

  http://communities.Intel.com/thread/32614

  Myself.

• I have problems with my 7510 holding a wireless ip address 192.168 etc. He said 169. etc.

  My HP Photosmart all-in-one (which is only a few months old) stopped communicating with my router Netgear DGN1000 Adsl a few days before Christmas.

  Instead of the 192.168.0.9 ip address that he used before I turned off the router, ITI is back with an address of 169.254.249.128; 'Source setup' = 'Auto ip "; a subnet mask of 255.255.0.0; and default gateway 0.0.0.0. I know that they are bad, so I tried a fixed ip address to 192.168.0.201, a SM 255.255.255.0; and a DG 192.168.0.1; It was OK, but the next day, returned to the auto ip settings.

  I finally managed to contact HP and the guy spent 75 minutes with me trying to restore things and finally the village that the Netgear router did not have access to the printer via certain ports (which he sent me a list of) and something he said that I had to tell my ISP (Virgin media) "FLOOD DETECTION SET to OFF" & "SP1 FIREWALL SET TO OFF.

  Communicating with VM, they were insistent that their router was not at fault - they could open ports 12 or so, at a cost to me of 60 pounds! (I refused this)

  HP told me how to set up for printing Ad Hoc (bypassing the router), who had worked during our tests.

  VM has been in my settings for the router, via a remote access device and verified a few settings, but the only one, I saw them alter was CH10 CH11 to change.

  I could certainly not the printer to accept the 192.168.1.201 after that anyway.

  As a result, I have reset the network default printers and reconfigure wireless settings. He seemed OK and running on 192.168.0.9

  I have now reset IP address in the manual on the printer, by entering the 192.168.0.9 and 255.255.255.0; and 192.168.0.1;

  Touch wood he delayed for a few days, but I havn't turned off anything (but during the night before it went wrong!)

  I'm not convinced I have a solution here and would welcome any suggestions as to what I can still do it.

  Maybe I already have some, as I "completely uninstalled and reinstalled the software HP7510 on my desktop PC.

  Incidentally, the printer is set up on 3 PCs in the House - a desktop computer under W7 HP 64 bit, a laptop (same model with BONES) and a laptop under W7 HP, but 32-bit computer.

  All were unable to print when I had problems.

  I would appreciate any suggestions for a fix permanat more. (I would have rather found a final breakdown) I have all other routers, I could try, or I could open ports, but my question is - if I had need of these open ports and other settings (detection of flooding etc.) why the work of the printer for the first few weeks I had it implemented, and why turn off the router caused these issues? (Assume that I need in the future - to turn off the router happens)

  Thank you

  Dave

  Hi Dave,.
  
  Great post with good information.
  
  As you mentioned, the printer came back with a style 169.xxx.xxx.xxx IP address. This is normally produced when the device is not able to get a full connection with the router, router it gives an internal IP address.
  
  Normal suggestion when a printer continues to maintain a connection is to assign a static IP address. This is done by using the manual IP functionality, you've talked about using. This locks the device to the network settings, and even when the network is restarted the information is preserved. This should be the solution to the issue.
  
  I hope this helps.

• Officejet pro 8500 wireless print envelope

  2750 old boy had a slot "envelope" in the output tray to make unique envelopes.  Which was very convenient.  My brand new 8500 had no such "slot" and it seems that I have to remove all of the paper in the tray to put one envelope in!  That makes sense to me, but I'm not just any housing "simple envelope" anywhere!  Is it possible to print one envelope with the officejet pro 8500 wireless without having to use the tray itself?

  Thank you

  DrBillS

  I HAVE THE ANSWER THAT WE ALL NOW!

  If you're like me: I am running Windows 7, using Microsoft Word 2007, and you have the Officejet Pro 8500.

  I just spent the last hour on the phone with a customer service very friendly Rep who tried to help me to print without margins on an envelope. I have try on mail merge and include a return address printed in the upper left corner and a printed stamp sorted in the right corner. Whenever I want to print it would create a margin on the left and right side.

  She thought at first it was a software problem with Microsoft Word 2007, because in his version of Word 2003, she could print borderlessly. But I then created an envelope in Photoshop and tried printing without margins. Once more, it would create a margin on the left and the right that was a little more "5/8 of an inch. In fact, the exact margin size is 0,6875 ".

  Anyone else having the same problem? I'm sure you are.

  HERE'S WHAT YOU SHOULD DO IF YOU WANT TO PRINT WITHOUT MARGINS ON AN ENVELOPE:

  (1) choose a new document in Word 2007, then choose Virgin doc 'LETTER' (no envelope)

  (2) a set of left margin: 0,1875 (Yes it's small!)

  (3) a set of right margin: 1.5

  (4) set the top margin: 2.1875

  (5) also set the bottom margin: 2.1875

  (6) turn the grid if you see your work area.

  The grid can be enabled in the 'View' menu and then select the gridlines check box. If you hold down the 'alt' key, you can move objects (such as text boxes) without having to align them on the grid.

  Create your envelope, then print. Essentially what you are fooling your printer to think you are printing on a letter for an envelope printing in reality. I need to print 1000 at a time, so it was do-or-die because I just bought this printer and love the speed at which it prints in color. especially on the functionality of the project.

  Good luck!

• print wireless or internet access

  OfficeJet 6700 all-in-one and win8.1... internet comcast will allow me to add a printer to the wireless network and then lose internet connectivity.  Restore internet and printer is "offline".  win7 originally had when the network set up and win8.1 installed as update without problems.  had to reset the network and now I have only 1 or the other.  has ran through all the troubleshooting steps, nothing helps.  I hope that I do not need a new all-in-one built for win8.1 but don't know where to go now...

  tried the previous fixes nothing works.  tempting has spent a few hours with comcast of difficulty.  they spilled the ball in the lap of HPs.  found this and thought to try, but getting laste now.  afraid that if I started tonite and chops off the coast of web connectivity, do not want to start an other HR more conversation... will try again in the morning (luckliy do not return to work until sea nite).  inquire about the results, but I appreciate the common sense and quick reaction.

• Satellite Pro 4600: WiFi / Wireless Card [built-in]

  Hello

  I've got some hard get my WiFi integrated to work. I can't seem to find a driver for it anywhere (to install even the damn thing) and I can't seem to find anywhere in the BIOS that will allow me to "enable" it.

  I spent it to 'On' but still no luck. Could someone help?

  Thanks in advance,
  Mike

  Hello

  I assume that the laptop has been delivered without any WiFi card and you have installed the minPCI wireless network card. Am I wrong?
  Well, first of all, how did you install the wireless network adapter?
  As far as I know there are Brown and white 2 cables. The white goes to the hand and Brown to auxiliary voltage
  Then Device Manager should recognize the device is an additional device. I put t know what WLan card you use, but the drivers compatible, you should find on the Wlan card manufacturers website.

  On the left side for laptop, you'll find a Wlan antenna switch. This switch must be turned on (LIT) If you want to use the Wlan

• No wireless connection on A100-181

  My A100-181 is a month. I managed to have an ADSL (broadband) internet connection at home with Orange France using their Livebox. The connection worked using a USB and a wireless connection using the built-in Atheros wireless installation. However, for the last week, I was unable to establish the wireless connection! The Livebox is synchronized and my cell phone work the front desk, but are unable to connect to the computer and the Livebox! I spent 3 hours on the phone with Orange technicians who tell me now that my wireless card must be verified by Toshiba, as the Livebox is very well (so they tell me). I need to download the latest drivers for my wireless card? Should I delete and start from scratch by using the restore CD? Wireless card function perfectly and then suddenly stop working? I would be grateful for any advice.

  Hello

  First of all please check if Device Manager wireless network card is correctly recognized.
  If it you will not find any yellow exclamation so I guess that the NIC wireless and other devices are working properly.
  So don't forget to turn on the Wlan switch on the side of the laptop and use the function FN + F8

  You wrote that you use the Atheros WLan utility. In this case the Windows WLan configuration must be disabled because the Atheros controls the WLan configuration.
  I put t know if you encrypted you WLan but I recommend disabling this option to test the connection. You can activate it later.
  Please also check if the MAC addresses of filtering is disabled on the router.

  Well, of course, you can try to update the WLan driver. For this, you can consult the page of the Toshiba driver.