'Image' of block multi-record element type

Similar Questions

• The assignment of value to the block multi-record in Oracle's 10 g

  Hi all

  I'm new to form of Oracle 10 g.

  I have a block of several recording that does not rely on the database. I need to assign the value to this block multi-record dynamically the ref cursor.

  I'm trying to set the value as below, but its does not work. Please help me on this.

  loop
       fetch cur Into screenval_rec ;
        exit when cur%notfound ;
        first_record;
     
    :BLOCK1.COL1:= screenval_rec.value1;
      :BLOCK1.COL2 := screenval_rec.value2;
      :BLOCK1.COL3:= screenval_rec.valu3;
    
       next_record;
  End loop;
  
  

  Kind regards

  REDA

  Hi Craig,.

  Thank you for your information.

  But I found the exact cause of this "Invalid cursor error' (ORA-01001) in Oracle forms. It is because of the unique enclosed in quotes the select statement of the REF cursor. I found in the paragraphs below Oracle.

  Note 170881.1 - ORA-1001 calling a stored procedure that contains a REF Cursor Oracle Forms

  Once I deleted the quotes, it's working properly now.

  Thanks again for your help.

  Kind regards

  REDA

• navigation block multi-record question

  Hello
  
  I have a block multi-record with 4 fields in each record. Each field has a LOV attached to it. When I select a value from the LOV to the 1st field, the 'control' should go to the next field (ie., the slider should move to the 2nd field).
  
  How can I do this?
  
  Thank you
  Chiru

  No need for any trigger, set the automatic 'Skip' property for the LoV to 'yes '.

• Block multi Record

  Hello
  
  I have a block of several record and under certain conditions, I would disable lines that statisfies the condition
  
  I will check that the trigger in a TIMES NEW BLOCK INSTANCE.
  
  The problem is SET_ITEM_INSTANCE_PROPERTY it is an attribute of current_record, but do not know how to assign the condition current_record as the condition returns some value can only turn off the lines.
  
  Could someone help?
  
  Concerning

  Transfer your logic of an once - instance trigger new - block to a trigger after query on your block "block":

  IF: block.item = "SAVE" THEN
  SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_FALSE);
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_TRUE);
  END IF;

  But INSERT_ALLOWED no sense that the record exists, perhaps you mean UPDATE_ALLOWED?

• Querying a multi-record in my form block

  I have a form where I perform validations of items entered on my main block. I compare the value of the item entered an expected value and if they are different then an exception record must be created in a separate block, several recording in my application. A record on my main block can end up with several different recordings of exception in the block of multi-record. As a result, my validation must include determining if the user has already created an exception record for the article I'm validating in the block of multi-record.
  
  Is it possible for me to query and uncomitted, block multi-record in my form? Help would be greatly appreciated!

  That's what I meant with "loop on the block."

  Write a function, lets call it FK_CHECK_FOR_EXCEPTION, give in the code and the name of the element as parameters and let it returns TRUE if the exception exists, false otherwise:

  FUNCTION FK_CHECK_FOR_EXCEPTION(i_vcItem IN VARCHAR2, i_vcCode IN VARCHAR2)
  RETURN BOOLEAN IS
    bFound BOOLEAN:=FALSE;
  BEGIN
    GO_BLOCK('BLOCK_B');
    FIRST_RECORD;
    LOOP
      EXIT WHEN :SYSTEM.RECORD_STATUS='TRUE';
      IF     :BLOCK_B.ITEM=i_vcItem
         AND :BLOCK_B.CODE=i_vcCode THEN
        bFound:=TRUE;
        EXIT;
      END IF;
      EXIT WHEN :SYSTEM.LAST_RECORD='TRUE';
      NEXT_RECORD;
    END LOOP;
    RETURN bFound;
  END;
  

  Then, in your VALIDATION KEY, you can something like:

  IF =FALSE THEN
    IF NOT FK_CHECK_FOR_EXCEPTION('ITEM1', 'THECODE') THEN
      RAISE FORM_TRIGGER_FAILURE;
    END IF;
  END IF;
  

• have a multi-record with several unrelated elements blocking, filled by simply calling

  Forms of oracle, I have a form with a block of several recording, with several unrelated elements.
  One of these non-is a basic formula element.
  The formula for this article fills the others not consolidated items.
  A procedure with several out parameters is called.
  
  For example
  : cmr.id (now the unique id of a database record)
  : cmr.unbound_dummy, with the formula f_fill_blk_unbound_items(:blk.id)
  : cmr.unbound_adres
  : cmr.unbound_contactperson
  
  function f_fill_blk_unbound_items (p_id in customers.id%type)
  Return number
  is
  number of l_rc;
  Start
  customer_pck.get_adres_and_contactperson
  (p_id = > p_id - IN)
  , p_adres = >: cmr.unbound_adres - OUT
  , p_contactperson = >: cmr.unbound_contactperson - OUT
  );
  Return (0);
  end;
  
  QUESTION: How can I do something similar in the APEX; have a blocking of multi-record with several elements not related, filled by calling a procedure with several out parameters?

  The suggestion refers to functions in pipeline
  http://www.Oracle-Developer.NET/display.php?ID=207

  This will allow you to select your information you need in a query like

  SELECT * FROM TABLE(table_function)
  

  It should also more powerful than the example of forms.

  Scott

• Cannot access the multi-record block

  Hi friends
  
  I am facing a problem in one of 6i.
  
  On the form:
  In our form, we have two tabs:
  
  Tab1: We're looking for an order
  
  Tab2: Lists all commands
  
  Problem:
  When we have two tabs enabled, then I am able to move through the records of Tab2 (keyboard and mouse)
  
  However when Tab1 is disabled, so I am not able to navigate through the folders in Tab2 (keyboard or mouse)
  It has scrollbar in Tab2, when I drag the scroll bar, and then I am able to navigate through folders block2, but still not with the mouse.
  
  Limit of naviagtion of mouse is form
  For the block gives problem: elements have keyboard navigable Yes
  
  
  
  I do not understand this behavior, that is our requirement for some tab1 user will be disabled

  Hello

  u think to tab1 to user2 invisible so pending a TIMES-NEW-FORM, you can use to have...

  GO_BLOCK...
  GO_ITEM...
  

  I doubt that will help me with that: If the 2 trigger is executed after 1

  WHAT is the name of the trigger you want to know about his execution?

  I hope this helps...

  Kind regards

  Amatu Allah

• How to check the values in multi-record block. ?

  Hello
  
  I'm new to forms. I have the field titled "Comments" in the block of multi-record. I have a button called "reject". Reject button is in the control block. If I press the button reject, field comments must be entered in one of the record. Otherwise, he should tell message. How to check the multi-record block. ?
  
  Pl.Help.
  
  Thanks in advance.
  Mano

  Mano,

  Add NEXT_RECORD just before the END of the LOOP.

       GO_BLOCK('');
       FIRST_RECORD;
       LOOP
            IF NVL(:., ' ' ) = ' ' THEN
                 MESSAGE('');
                 RAISE FORMS_TRIGGER_FAILURE;
            END IF;
            EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
            NEXT_RECORD;
       END LOOP;
  

  Kind regards

  Manu.

  If my response or response from another person was helpful, please mark accordingly

• How to do the validation to the record level in multi record block.

  Hello
  I use form 10g. I have a doubt in form 10g. Look, I got multi-record block (10 records).
  In this block, I have a few items of text
  (1) S_NO
  Account_number 2)
  withdraw_amt 3)
  Deposit_amt 4)
  (5) balance_amt.
  
  These are the fields and sample data that I posted in forms.
  S. n ACC_No - WITHDRAW_AMT - DEPOSIT_AMT - BALANCE_AMT
  1-250 - 1000.00 - 1000.00
  2.------250-----------500.00-------------------------------------------500.00
  3-250 - 2000.00 - 2500.00
  
  
  Now, I entered the data manually in all areas...
  But what I need is if I entered the field of deposit in the amount it will add to the old balance and if I add the amount to remove the field that he removed from the old balance automatically.
  Pls tell me what are the possible ways to implement this form...
  
  
  Eliane.

  For the calculation of the fields there are some properties, you can define and then let the calculation forms. The WHEN-VALIDATE-POINT-approach will not work, because it increases your balance_amount whenever you change the value.

  But what exactly is the logic for your calculation. It's just: BALANCE_AMT =: DEPOSIT_AMT-: WITHDRAW_AMT?

  If so, create a new database item not in the block, assign Calcaulation-mode of 'Formula', a formula to something like

  NVL(:BLOCK.DEPOSIT_AMT,0)-NVL(:BLOCK.WITHDRAW_AMT)
  

  Then whenever you change DEPOSIT_AMT or WITHDRAW_AMT, the BALANCE_AMT will be calculated again.

• Fetch the multi-record acquisitions takes too long

  Hello

  I need to improve the performance of my code in multi record acquisition on the following system.

  LabVIEW 2009, Niscope 3.5.2 map 5122 digitizer on the PXI-1042 with PXI-8106 controller connected to the host PC Dell Optiplex 380 with 4 GB of RAM by crossover cable.

  I tested the speed of transfer of my connection to the chassis using the niScope memory transfer Rate.vi Maximum flow, the result was 110,74 MB/s.

  I need to use the scanner to get the waveform of different seismic sensors and it should be as fast as possible to get different transducers in a reasonable time. I used the Multi files get VI to monitor the rate at which the code executes. I want to acquire 30 signals with 10,000 record length to 100 MECH sampling rate. / s.

  Extraction of 30 records with 10 000 record length takes about 300 ms, that is far too long for my experience. I tried different numbers Records and found that the code takes 10 milliseconds per registration type. I've found that extraction vi takes most of the time. I ran my code both recording Multi search vi. Two sleeves at the rate which is not satisfactory for my application. I appreciate if someone can help me solve the problem.

  Thank you

  Ahmad

  .

  I found that on the pulse generator FRP was set at 100 Hz, which means it sends the impulse evey 1/100 sec or each 10 m I think the program was waiting to acquire the signal. I changed the FRP at 1 K Hz, it became much more quickly.

  Thank you

  Ahmad

• Problem event name: ServiceHang name of the Service: Image name MEANING: sens.dll Image Version: 6.0.6001.18000 Type of Service: 20 Startup Type: 2 OS Version: 6.0.6002.2.2.0.768.3 locale ID: 1033

  Hello

  I am writing to find out if I've broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm blocking this computer to do a clean install of Windows 7.
  ___________________________________________
  Windows NT Version 6.0 Build: 6002 SP2
  Product (0x3): Vista (TM) Home Premium Windows
  Edition: HomePremium
  BuildString: 6002.18484.x86fre.vistasp2_gdr.110617 - 0336
  Flavor: Multiprocessor Free
  Architecture: X 86
  LCID: 1033mama
  ___________________________________________
  Description
  Service System Event Notification Service hung on starting.

  Signature of the problem
  Problem event name: ServiceHang
  Service name: SENSE
  Image name: sens.dll
  Image Version: 6.0.6001.18000
  Type of service: 20
  Startup type: 2
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem
  Version.txt
  minidump.mdmp
  ___________________________________________

  Plain talk:
  The computer works well except there anyway any internet connection.
  As in not even one toe in the door more.

  Recovery is off, so no chance to try this.
  No virus is embedded.

  What I was doing?
  I was streaming a lot of Netflix for the last two weeks...

  I like to think that I run a pretty tight ship with this machine as in its 'own' (except recovery being off)...

  Toshiba Satellite A205 - S4607

  Device Manager shows everything is working normally. It would show if the equipment was broken?

  A month ago I noticed a bulge just above F7 to F11. The highest part being F9. It is just the plastic,
  but, obviously something had warm, yet, the machine worked very. When I discovered that it was the other
  morning after and streaming aircraft are asleep... computer had been just sitting there with remnants of
  'Dead' in the browser since ignored Netflix...

  So, back at the beginning of this email:
  "broken hardware or software corruption...?
  In the end, after I transfer files via a cable, I'm crashing this computer to do a clean install of Windows 7. »
  (or am I?)

  Thank you for any constructive comments,
  Tim

  Hi T9mothy,

  Method 1
  Device Manager would show if the driver for the hardware is corrupted or damaged which can be resolved by updating or reinstalling the driver. Try the steps from the following link to resolve the problem of the internet.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2
  SFC scanner. SFC will correct if you have corrupted system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If you have problems with the hardware, then you need to contact the manufacturer of the computer.

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Why the images are blocked in my emails?

  My e-mail work fine except that some images are blocked and contain a small box with a red x in it. Also when I open Thunderbird, it says that it cannot connect to the proxy server.

  ... it says it cannot connect to the proxy server.

  Check your network settings, then correct for the proxy. If you do not use a proxy, adjust the setting accordingly.

• Multi-record acquisition and fetch registration number

  My question relates to the fact an acquisition multi-record and go look for more than one record by extraction, but less than the total number of records.

  Let's say I am absorbing N records and go pick up j at a time where 1<>

  Hi EDD,.

  You are right that the "Fetch Record Number" property is adjustable to i * j in this case. Given that I have is starting from scratch, it works wonder. However, you need to make sure you stop the loop after the right amount of documents were recovered, which will be asked to configure the correct logic. This could be kept simple if you pick a divisor of your total of records every time, but if not, you will need to determine when you are on the last iteration, and the number of records you have left to seek before arriving at the end of your files.

  For example, if you are purchasing records total N = 100 and go for j = 10 at a time, you can simply extract I * j every time and to know when to stop, simply take (I * j) + j > = N. It works fine when j is a divisor of N integer, but otherwise, most logical should be included to determine the number of records can be left at the end, and then to seek a large number. Hope this helps,

• Plugin element type: css-class of APEX interface is lost...

  Hi guys!

  It is still a matter of plugin.

  And before that: is there a forum dedicated to issues around the APEX plugin development? I don't know http://www.apex-plugin.com/ where you can share, but not discuss your own little ones. And other sites are more commercial.

  Perhaps someone here can also answer my current question:

  In the developer interface, you have the form HTML CSS Classes element and attributes of the HTML Formfields in the section of the element .

  The an element type plugin interface (among others) carries parameter apex_plugin.t_page_item.element_attributes.

  Documentation:APEX_PLUGIN

  Now the problem is that the values I enter in the field of the HTML form element attributes are passed to plugin procedure, the values of the Class CSS of HTML form elements get lost. And I couldn't find any other setting for this field of class.

  That's how I made of the element:

     v_html := '<input type="text" name="@name@" id="@id@" width="@width@" @attr@>';
      v_html := replace ( v_html, '@name@',     apex_plugin.get_input_name_for_page_item(false) );
      v_html := replace ( v_html, '@id@',       p_item.name);
      v_html := replace ( v_html, '@width@',    p_item.element_width );
      v_html := replace ( v_html, '@attr@',     p_item.element_attributes );
      sys.htp.prn(v_html);
  
  
  

  ... and so far every thing works. Certainly I can include my own class here, but I often insert a class at the level of application development, and I imagine that others do also.

  I also tested other plugins of item type, and did not see how the css class I spend there, reached the HTML.

  I forgot something or is it a flaw in the development of a plugin?

  Thank you and best regards,

  Tobi

  Work with 4.2.1

  Hey Tobi,

  You can find this setting in p_item.element_css_classes. I just checked out apex.oracle.com (4.2.4) and this attribute is passed correctly,

  Peter