Block multi Record
HelloI have a block of several record and under certain conditions, I would disable lines that statisfies the condition
I will check that the trigger in a TIMES NEW BLOCK INSTANCE.
The problem is SET_ITEM_INSTANCE_PROPERTY it is an attribute of current_record, but do not know how to assign the condition current_record as the condition returns some value can only turn off the lines.
Could someone help?
Concerning
Transfer your logic of an once - instance trigger new - block to a trigger after query on your block "block":
IF: block.item = "SAVE" THEN
SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_FALSE);
ON THE OTHER
SET_ITEM_INSTANCE_PROPERTY ('block.deptno', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_TRUE);
END IF;
But INSERT_ALLOWED no sense that the record exists, perhaps you mean UPDATE_ALLOWED?
Tags: Oracle Development
Similar Questions
-
The assignment of value to the block multi-record in Oracle's 10 g
Hi all
I'm new to form of Oracle 10 g.
I have a block of several recording that does not rely on the database. I need to assign the value to this block multi-record dynamically the ref cursor.
I'm trying to set the value as below, but its does not work. Please help me on this.
loop fetch cur Into screenval_rec ; exit when cur%notfound ; first_record; :BLOCK1.COL1:= screenval_rec.value1; :BLOCK1.COL2 := screenval_rec.value2; :BLOCK1.COL3:= screenval_rec.valu3; next_record; End loop;
Kind regards
REDA
Hi Craig,.
Thank you for your information.
But I found the exact cause of this "Invalid cursor error' (ORA-01001) in Oracle forms. It is because of the unique enclosed in quotes the select statement of the REF cursor. I found in the paragraphs below Oracle.
Note 170881.1 - ORA-1001 calling a stored procedure that contains a REF Cursor Oracle Forms
Once I deleted the quotes, it's working properly now.
Thanks again for your help.
Kind regards
REDA
-
navigation block multi-record question
Hello
I have a block multi-record with 4 fields in each record. Each field has a LOV attached to it. When I select a value from the LOV to the 1st field, the 'control' should go to the next field (ie., the slider should move to the 2nd field).
How can I do this?
Thank you
ChiruNo need for any trigger, set the automatic 'Skip' property for the LoV to 'yes '.
-
'Image' of block multi-record element type
If I have a block of several record with a type of picture element, is it possible to load only / display an image for some of the records on a datablock? It seems that "READ_IMAGE_FILE" still applies to the whole element, which is responsible for the image for all records in the block... I can't find anything that will load only the image of a certain recording that I said... Something as sort of 'SET_ITEM_INSTANCE_PROPERTY' where I can put the record number I want the image to display on. Such a thing exists?
Thank you!If the item of the Image is based on a BLOB column, you can escape to the population of the order of the day. I see no work around. It's like you ask a record, but do not want to display the content of the column.
François
-
Querying a multi-record in my form block
I have a form where I perform validations of items entered on my main block. I compare the value of the item entered an expected value and if they are different then an exception record must be created in a separate block, several recording in my application. A record on my main block can end up with several different recordings of exception in the block of multi-record. As a result, my validation must include determining if the user has already created an exception record for the article I'm validating in the block of multi-record.
Is it possible for me to query and uncomitted, block multi-record in my form? Help would be greatly appreciated!That's what I meant with "loop on the block."
Write a function, lets call it FK_CHECK_FOR_EXCEPTION, give in the code and the name of the element as parameters and let it returns TRUE if the exception exists, false otherwise:
FUNCTION FK_CHECK_FOR_EXCEPTION(i_vcItem IN VARCHAR2, i_vcCode IN VARCHAR2) RETURN BOOLEAN IS bFound BOOLEAN:=FALSE; BEGIN GO_BLOCK('BLOCK_B'); FIRST_RECORD; LOOP EXIT WHEN :SYSTEM.RECORD_STATUS='TRUE'; IF :BLOCK_B.ITEM=i_vcItem AND :BLOCK_B.CODE=i_vcCode THEN bFound:=TRUE; EXIT; END IF; EXIT WHEN :SYSTEM.LAST_RECORD='TRUE'; NEXT_RECORD; END LOOP; RETURN bFound; END;
Then, in your VALIDATION KEY, you can something like:
IF
=FALSE THEN IF NOT FK_CHECK_FOR_EXCEPTION('ITEM1', 'THECODE') THEN RAISE FORM_TRIGGER_FAILURE; END IF; END IF; -
have a multi-record with several unrelated elements blocking, filled by simply calling
Forms of oracle, I have a form with a block of several recording, with several unrelated elements.
One of these non-is a basic formula element.
The formula for this article fills the others not consolidated items.
A procedure with several out parameters is called.
For example
: cmr.id (now the unique id of a database record)
: cmr.unbound_dummy, with the formula f_fill_blk_unbound_items(:blk.id)
: cmr.unbound_adres
: cmr.unbound_contactperson
function f_fill_blk_unbound_items (p_id in customers.id%type)
Return number
is
number of l_rc;
Start
customer_pck.get_adres_and_contactperson
(p_id = > p_id - IN)
, p_adres = >: cmr.unbound_adres - OUT
, p_contactperson = >: cmr.unbound_contactperson - OUT
);
Return (0);
end;
QUESTION: How can I do something similar in the APEX; have a blocking of multi-record with several elements not related, filled by calling a procedure with several out parameters?The suggestion refers to functions in pipeline
http://www.Oracle-Developer.NET/display.php?ID=207This will allow you to select your information you need in a query like
SELECT * FROM TABLE(table_function)
It should also more powerful than the example of forms.
Scott
-
How to check the values in multi-record block. ?
Hello
I'm new to forms. I have the field titled "Comments" in the block of multi-record. I have a button called "reject". Reject button is in the control block. If I press the button reject, field comments must be entered in one of the record. Otherwise, he should tell message. How to check the multi-record block. ?
Pl.Help.
Thanks in advance.
ManoMano,
Add NEXT_RECORD just before the END of the LOOP.
GO_BLOCK('
'); FIRST_RECORD; LOOP IF NVL(: . , ' ' ) = ' ' THEN MESSAGE(' '); RAISE FORMS_TRIGGER_FAILURE; END IF; EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE'; NEXT_RECORD; END LOOP; Kind regards
Manu.
If my response or response from another person was helpful, please mark accordingly
-
How to do the validation to the record level in multi record block.
Hello
I use form 10g. I have a doubt in form 10g. Look, I got multi-record block (10 records).
In this block, I have a few items of text
(1) S_NO
Account_number 2)
withdraw_amt 3)
Deposit_amt 4)
(5) balance_amt.
These are the fields and sample data that I posted in forms.
S. n ACC_No - WITHDRAW_AMT - DEPOSIT_AMT - BALANCE_AMT
1-250 - 1000.00 - 1000.00
2.------250-----------500.00-------------------------------------------500.00
3-250 - 2000.00 - 2500.00
Now, I entered the data manually in all areas...
But what I need is if I entered the field of deposit in the amount it will add to the old balance and if I add the amount to remove the field that he removed from the old balance automatically.
Pls tell me what are the possible ways to implement this form...
Eliane.For the calculation of the fields there are some properties, you can define and then let the calculation forms. The WHEN-VALIDATE-POINT-approach will not work, because it increases your balance_amount whenever you change the value.
But what exactly is the logic for your calculation. It's just: BALANCE_AMT =: DEPOSIT_AMT-: WITHDRAW_AMT?
If so, create a new database item not in the block, assign Calcaulation-mode of 'Formula', a formula to something like
NVL(:BLOCK.DEPOSIT_AMT,0)-NVL(:BLOCK.WITHDRAW_AMT)
Then whenever you change DEPOSIT_AMT or WITHDRAW_AMT, the BALANCE_AMT will be calculated again.
-
Fetch the multi-record acquisitions takes too long
Hello
I need to improve the performance of my code in multi record acquisition on the following system.
LabVIEW 2009, Niscope 3.5.2 map 5122 digitizer on the PXI-1042 with PXI-8106 controller connected to the host PC Dell Optiplex 380 with 4 GB of RAM by crossover cable.
I tested the speed of transfer of my connection to the chassis using the niScope memory transfer Rate.vi Maximum flow, the result was 110,74 MB/s.
I need to use the scanner to get the waveform of different seismic sensors and it should be as fast as possible to get different transducers in a reasonable time. I used the Multi files get VI to monitor the rate at which the code executes. I want to acquire 30 signals with 10,000 record length to 100 MECH sampling rate. / s.
Extraction of 30 records with 10 000 record length takes about 300 ms, that is far too long for my experience. I tried different numbers Records and found that the code takes 10 milliseconds per registration type. I've found that extraction vi takes most of the time. I ran my code both recording Multi search vi. Two sleeves at the rate which is not satisfactory for my application. I appreciate if someone can help me solve the problem.
Thank you
Ahmad
.
I found that on the pulse generator FRP was set at 100 Hz, which means it sends the impulse evey 1/100 sec or each 10 m I think the program was waiting to acquire the signal. I changed the FRP at 1 K Hz, it became much more quickly.
Thank you
Ahmad
-
Multi-record acquisition and fetch registration number
My question relates to the fact an acquisition multi-record and go look for more than one record by extraction, but less than the total number of records.
Let's say I am absorbing N records and go pick up j at a time where 1<>
Hi EDD,.
You are right that the "Fetch Record Number" property is adjustable to i * j in this case. Given that I have is starting from scratch, it works wonder. However, you need to make sure you stop the loop after the right amount of documents were recovered, which will be asked to configure the correct logic. This could be kept simple if you pick a divisor of your total of records every time, but if not, you will need to determine when you are on the last iteration, and the number of records you have left to seek before arriving at the end of your files.
For example, if you are purchasing records total N = 100 and go for j = 10 at a time, you can simply extract I * j every time and to know when to stop, simply take (I * j) + j > = N. It works fine when j is a divisor of N integer, but otherwise, most logical should be included to determine the number of records can be left at the end, and then to seek a large number. Hope this helps,
-
Hey Odie,
I have a requirement in XML, where I'll be getting a XML file with record multi. The sample XML file is like this. I need to confirm whether or not the multi record is acceptable.
There is no record of the child. It's just registration tabular information.<?xml version="1.0" encoding="UTF-8" ?> - <XMLTEST> - <HEADERS> <a>RPO</a> <b>000</b> </HEADERS> - <HEADERS> <a>ABC</a> <b>456</b> </HEADERS> - <HEADERS> <a>DEF</a> <b>789</b> </HEADERS> - <HEADERS> <a>GHI</a> <b>VALE</b> </HEADERS> - <HEADERS> <a>ACCEPTED</a> <b>MULTIRECRDS</b> </HEADERS> </XMLTEST>
For the above data, I wrote below mentioned examples of code
I'm not able to find all the records in the staging table. XML directory is already existing in the system, no problems with all other external things. Please confirm where exactly the sequence is missing.DECLARE lv_supp_file XMLTYPE; l_file_name VARCHAR2(300); l_folder_name VARCHAR2(300); lv_sysdate DATE := sysdate; lv_err_msg VARCHAR2(2000); BEGIN lv_supp_file := xmltype( bfilename('XMLDIR','XMLTEST.XML'), nls_charset_id('AL32UTF8')); -- dbms_output.put_line('P_XML_FILE '||lv_supp_file); INSERT INTO xml_test (A, B) SELECT A, B FROM XMLTable('/XMLTEST' passing lv_supp_file columns A VARCHAR2(100) path 'HEADERS/A', B VARCHAR2(100) path 'HEADERS/B' ) ; DBMS_OUTPUT.PUT_LINE('RECORDS INSERTED '); COMMIT; EXCEPTION WHEN OTHERS THEN DBMS_OUTPUT.PUT_LINE('Error Occurred :='||SQLERRM); lv_err_msg := SQLERRM; END; /
Kind regards
Mr. Nagendra
Published by: 838961 on December 5, 2011 01:20OK, did you change the paths accordingly too?
SELECT a, b FROM XMLTable('/TESTXML/HEADERS' passing lv_supp_file columns a VARCHAR2(100) path 'A' , b VARCHAR2(100) path 'B' ) ;
-
Relative position of a form of multi-record Record in a block
Hi all
I have a block record multi with number of items displayed in the 16. This block is used to fill the data in the table that can contain 100 records. When I scroll down the block for a record 39 said individual, I get the value of current_record than 39. But how do I know its relative position, that is to say which position he is currently now out of these 16 files that are displayed. Is there a way to manipulate it.
Version of form: form of Oracle 10 g
Thanks and greetings
JaKes
Hello:
You can use: TO_NUMBER (Get_Block_Property (: system.cursor_block, CURRENT_RECORD))-TO_NUMBER (Get_Block_Property (: system.cursor_block, TOP_RECORD)) + 1
Kind regards
-
How to check the previous value of the element in a multi-record block
Oracle Version: 10 g
Forms Version: 10 g
Hi all
Hello everyone, I have a multi-dossier block in a form where one of the values of elements is of LOV.user can select the value of LOV.
If once the user selects the value of LOV and moves to the next of the multi-file record, and selects the value of LOV again, I shouldn't allow users to select the previous value of the user in order to avoid duplication of records.
and important remark is that I should get there before you save it in the database because once registered in the database I can compare the values and hide the previous value.
Any help will be appreciated.
Thanks and greetingsThis is a question frequently asked in the forum! There are several different solutions. Take a look at the following articles. Both will perform the necessary verification of duplicates.
Forms - registration of treatment group (value in double check...
or
Avoid records duplicated in a blockIf none of these solutions don't work for you, search the forum for other options.
Hope this helps,
Craig B-)If someone useful or appropriate, please mark accordingly.
-
multi record selection in shape has 3 tubular blocks
Good times for all
I have a form that has 3 tubular blocks
I need to highlight for the 3 files that are now involved in 3 blocks
I write this code in two triggers but not work
Triggers is
when_validate_record
post_query
Start
IF
: SYSTEM. RECORD_STATUS = 'true', then
Set_Item_Instance_Property('GRADE_NAMES.) USER_GRADE_ID', current_record, VISUAL_ATTRIBUTE, 'VISUAL_CURR');
Set_Item_Instance_Property('GRADE_NAMES.) PROGRAM_NAME_AR', current_record, VISUAL_ATTRIBUTE, 'VISUAL_CURR');
-OTHER
-Set_Item_Instance_Property('<BLOCK_NAME.field_n ame>,current_record,VISUAL_ATTRIBUTE,'TEXT');
END IF;
end;
Applications
Ibrahim
Hello
You don't need to write the code
Just do the following
1. create the Visual attribute with desire color
2 assign this Visual attribute on the property of current Visual attribute Record Group block (all three block)
Please check the question answer correct/good, if this has answered your question. Thank you
-
To add values in a multi-record block in oracle forms 6i
S. n
Agenda
Quantity
1
KEYBOARDS
5
2
MOUSE
6
3
MONITOR
2
4
CENTRAL PROCESSING UNIT
4
TOTAL quantity
17
Hello world
He is an example for adding records in this block. I need to add the values of the quantity of each time when it has updated. Entering the first record(value=5) the total should display 5. When you enter the second value(value=6) the total should be 11. And if it changes in accounts are rendered already entered the total value must be updated. Please help me do this in oracle forms.
Hey, Moris,.
For the contents according to your requirement, create a block and put an element contained in this block that reside on the same canvas.
Then below mentioned property BLOCK for newly created block:
- Single disc: Yes
Then set below mentioned ELEMENT of property for the newly created item:
- Data type: number
- Method of calculation: 'summary '.
- Text-to-speech function: "sum".
- Block in summary: block that you created
- Point summary: Point you have created
I hope it will work for you, I tested and works great.
Thank you
Nilesh Goswami
Maybe you are looking for
-
Backup will not install applications
I tried to backup my iPhone to my 2012 than MacBook Air and I get an error message saying that my computer is not allowed to install the phone apps. So I go into account > authorization > authorize this computer. Once I authorize my computer and you
-
Hello, in my office we recently bought printer HP Designjet T2500 and, so far, works great but I have a doubt with the procedure of the Analyzer in the case where the main panel is malfunctioning. How can I scan a document without the help of the mai
-
Can I switch to El Capitan directly from OS x with Safari 6.2.8 10.8.5?
-
How can I get advanced original to standard oem display settings
MY VALUES CHANGED BY ANOTHER USER, AND I HAVE NO IDEA WHAT ARE THE ORIGINAL ADVANCED DISPLAY SETTINGS! WINDOWS XP
-
Windows xp sp3-basically a six year old child was playing on the computer. I didn't know that the idea that he did. Looks like he has deleted all devices. There are simply not there. When I click on the drives, it completes. Everythings still on disk