Similar Questions

• How do I remove high-low lines with VID HD in first elements 7?

  Problem: Every time I have shoot original sequences in camera and import video in first, there are lines up/down, unless I develop the video that will ruin the quality of original shooting.

  Camera:  I use a Sony 10.2 mega pixels HD AVCHD, taken from view in 1080I/480I - HD - 16:9

  Aim: I would like to edit my videos without expanding (ruining) of original sequences where my final videos are produced without high-low lines on the you tube videos.

  HELP: How can I solve this problem, either my camera or settings or something else that I need.  Your help is appreciated!

  It seems, from your other post, you understand that you use the correct project for your video and audio settings. This should help you 95% of the way.

  Then, when you export your video by using the share/Personal Computer / MOV, use one of the default presets. Usually, this will give you a version non-Letterbox your video. Also, take a look at the FAQ to the right of the forum.

  http://forums.Adobe.com/thread/390608?TSTART=0

  But remember also that YouTube has its own action in progress, and it could well be ondoing everything you do right. The best you can do is do your best - and hope YouTube is not screw it up too bad of re - encode.

• Volume of the Satellite A300D going low-high-low-high

  Hello

  I have a Toshiba Satellite A300D and I was listening to music through the built-in speakers and the volume seemed to go low-high-low-high (as a pulse)

  It is not that noticeable, but now I know about it.
  I'm quite get irritated with it. (I'm playing music via iTunes)

  In addition, this also happens when I use headphones, and when I play through external speakers.

  Anyone have any ideas on how to solve this problem?

  In addition,

  The button of the Player multimedia music button on the laptop itself opens Windows Media Player.

  Does anyone know how to change it to iTunes?

  Thank you!

  > I get quite irritated with it. (I'm playing music via iTunes)

  Have you noticed what playing music with MS Media Player, Win Amp or other applications?
  Do you have this notice without installation of software 3rd party such as iTunes for example?

  To be honest I have never heard of this issue, and I think that this could be linked to the gift of pre-installed software 3rd party laptop.

  > The button of the Player multimedia music button on the laptop itself opens Windows Media Player.
  > Is anyone knows how to change it to iTunes?

  As far as I know that's not possible. I use my mind Winamp buttons because I could activate this software WinAmp but it s doesn't know only not for me, it would be iTunes software supports the extension of the networks too.

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• How to stop the pop-up notification "this program blocked by group policy?

  Greetings,

  I created a software restriction policy that blocking a program running. In this case I get a pop-up window with the message "this program is blocked by group policy."
  How can I stop this pop-up?

  Hello

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question on the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps!

• Output a TTL HIGH 10 usec via the PFI port on AWG signal generator

  LV dear community,

  I want my signal generator (PXI-5422) to produce a pulse of 10usec with its PFI1 range each time that a wave of exit CH0.  The frequency of repetition of the CH0 impulses and the port of PFI1 is 10 kHz.  Is it possible for the signal generator automatically generate this HIGH TTL signals for usec 10 on the PFI1 line all at the same time produce a long-wave 100 usec?

  Another approach, that I'm considering is to re - route a pulse of RTSI1 (10usec) from an FPGA and output via port PFF1 of the GTS. However, I doubt that this is possible, as the HELP MENU for the working group said that the report can only occur when the Working Group is in "idle" mode.

  Any help will be greatly appreciated!

  Have a nice day I have attached a diagram of operation that hopefully, explains what I'm trying to do a little better.  Once again thanks for looking!

  -Daniel

  

  Hi Denn_Mann,

  To get around the limit of 320ns, you should be able to use scripts with the FGEN markers to achieve your goal. Anything you want to do is use of script with markers in alternating mode. You may want to toggle high then low rocker after the number of samples you want pulse is high while your signal is present. I've linked some information below that should be good resources for script for you if you are not familiar.

  Trigger on the arbitrary signal generators and advanced waveform sequencing

  Creating an event marker in Script Mode

  Script mode

  Example of the expedition: "Fgen Arb Script.vi.

  Kind regards

  Ann Travis

• MI iphone 6s esta blocked is that not me acuerdo of the clave of acceso al Teléfono, lo trate reiniciar en itunes pero no e could

  MI iphone 6s esta blocked is that not me acuerdo of the clave of acceso al Teléfono, lo trate reiniciar en itunes pero no e could

  The password lock screen, the restriction code and your Apple ID password can be very different. If she asks you a password, you should be able to use the options described in the lower part. If she asks you your Apple ID password, you can work around it and will need to recover. See the articles below. Also, if you have proof of purchase for your device, you can go to an Apple store, they will help you with the Apple ID PW, but only if you can prove that you are the owner legitimate.

  Forgotten ID Apple PW:

  https://support.Apple.com/en-us/HT201487

  I forgot the password:

  https://support.Apple.com/en-us/HT204306

  If you have forgotten your password to use the Recovery Mode screen lock.

  https://support.Apple.com/en-us/HT201412

  If you have forgotten the password of restriction, you need to restore your device as New. Go through the normal process to restore your device, but when you see the option restore again, or from a backup, do not forget to click New.

  https://support.Apple.com/en-us/HT201252

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• 6035-E high frequency noise reduces the resolution of 14 bits.

  Dear Technical Support Group OR and MF DAQ,

  I don't get the complete 16-bit on my DAQ 6035 - E cards and 6034-E resolution because of the high frequency noise.
  The Test Panel and the actual catches show 1.2 mV peak-to-peak noise with entries is is failed the GA right input in differential ended mode and single connector - Test Panel screen grab and connector attached picture.
  With a range of +-10V, noise LSB + half expected specified in the manual should be only 305 microvolts (20/65536) which is four times less than what I see.
  So far, I've been scanning (a channel) to ten times (60 KHz) the rate I need (6 KHz), then SavGol the filtering and sampling downstairs.
  The problem is that I need to sweep the four channels that now exceeds the capacity of 200 KHz of the card and also results in huge quantities of useless data.

  Have considered buying a new USB DAQ with better record, I fear that all products OR suffer the same flaws and gave the purchase.

  Please, share your ideas.

  Thank you.

  GPSman salvation,

  Looking at your control panel test plot, it would seem that there is a discrete steps on your axis is between - 0.0019 and - 0.0012 or 700 µV.  Then you can see that there is about a little more than 2 discrete steps to your signal, which brings value to about 300 microvolts, exactly as the resolution makes clear.

  You can also find that there is a specification of noise and precision in specification.  You can find for a single point, the accuracy in the +/-10V between 1,085 millivolt.  This is on page 4.  This would allow your signal of +/-1 mV of the expected value, the test also indicating panels.

  Does that help?

  best,

• Aspire V 15 Nitro sound very low even when the value to 100%. Does anyone have a solution?

  Dear community,

  I tried clicking on the sound icon.

  By selecting "playback devices".

  Clicking Tealtek High Definition Audio, and then click Properties.

  In "Improvements" all I have is a box unchecked to "disable sound effects everything" and nothing else. so, I can't find anything to change.

  When audio is playing on the icon settings sound is 100%, but the green bar is only part of the lower part of the bar.

  The sound was working fine last week. I don't know what I may have accidentally made.

  I would like suggestions or ideas.

  Thanks D.

  Dear IronFly,

  Thanks for all your suggestions. I just found out what caused the problem. A recent update for the onboard sound of Acer apparently gave it priority over Nvidia. To give priority to Nvidia and then by restarting the computer, its a was restored in all its splendour. If all goes well, this solution can help people who have lucky on a similar problem.

• USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  USB drive to block via group policy but keyboard, mouse, printers and USB Datacard work

  How to activate a strategy disable Usb drive but the keyboard mouse printer and the usb datacard work machine Windows 7.

  Hello

  In order to get better assistance to the group policy setting to block the use of a material to a computer, you should post your query in group policy on TechNet forums. I provided the link below, please use it to more assistance with Group Policy:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  I can't create a new thread there matching your query will help you to better understand the implementation of group policy.

• I get an error, "blocked by group policy.

  Original title: blocked by group policy

  I have a laptop win 7 which is blocked by group policy

  The admin account has been deleted and if I try the command run as admin I always get

  blocked by group policy Looks like a virus, but I can't install or do anything.

  all ideas

  If it is a recent problem, then you can correct it as follows:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Use system restore to set Windows to a point before it was infected.

• Error "this program is blocked by group policy. For more information, contact your system administrator. "downloading program.

  Original title: virus

  I can't download new programs, changing the date or make a few changes to my computer, that is the message I get "' this program is blocked by group policy. For more information, contact your system administrator ' ' how can I solve this problem.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. Your computer is connected through a network of field?
  2. You did it any significant hardware or change software on the computer before this problem?
  3. You have any other security software installed in the system or that you have uninstalled earlier?

  The question could arise due to lack of permissions due to the remains of some program in the uninstalled registry before. To further diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and check if the remains of any previously uninstalled security software is deleted.

  The problems that the programs cannot be installed or uninstalled

  Method 2:

  Give all the permissions on your user account and check if it helps.

  Follow the steps to give all permissions:

  a. press the Windows key + R, type regedit.exe in the Run dialog box and press enter.

  b. right-click on HKEY_LOCAL_MACHINE , and then click permissions.

  c. click Add under the Security tab and add a new group: everyone.

  d. Select everyone and check the option: total control.

  e. restart the computer and check if the problem is solved or not.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  Method 3:

  Please see the advice given by HappyAndyK April 26, 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-security/group-policy-on-Windows-81-issue/8a524894-fa6c-41AE-9E26-29ec4ccca36c

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Let us know if you need more assistance. We will be happy to help you.

  _____________________

  Thank you best regards &,.

  Isha Soni

• High low SNA SNA

  Hi all

  A redo log file has the same "low RCS' as the 'high' of his previous log sequence SNA. This means that it again for the transaction secured by this SCN is reflected in both these log files?

  Kind regards

  Vinod

  When you view this information?

  v$ log_history a first_change # and next_change # for newspapers. Note that it is the NEXT issue of change, not LAST change number. The NEXT of a newspaper is the FIRST of the next newspaper.

• High resolution quality of the State of stocks, Adobe and work with the previews?

  I used Sutterstock in the past, but being a CC subscriber, I am seriously investigate Adobe Stock.

  Because you don't actually see the image high resolution up to that after purchasing with Adobe Stock I can't say how easily compare its inventory with Sutterstock.

  I downloaded preview AdobeStock_52339199_WM which was, of course, low resolution and it was much smaller in size (preview 1000 x 662 cases real is 4590 x 3040).  Therefore, I really could not do anything with the preview since it's a "postage stamp" even if Larry White was a video how I was suppose to be able to work with the preview in Photoshop and when done, then buy the license.  And once again, in low resolution, I had know idea, with regard to the quality of the finished product, I'd be buying.

  Any help on these questions would be greatly appreciated.

  Hi Ray,

  I understand your concern. However, from now on, you will only be able to download the image in watermark, which is a version low resolution of the image. If you like, you can buy a version the same high resolution.

  Your comments are appreciated.

  ~ David