Blocks of purple in monitor (not reading)

Similar Questions

• Cross-origin request blocked: the same political origin does not read the remote resource

  while trying to perform the CORS get request I get this error:
  Cross-origin request blocked: the same political origin does not read the remote resource
  In chrome it works fine.
  I'm using firfox version 29

  A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

• My star bookmark icon does not show my favorites already recorded. My Favorites still exist just unordered, bookmarks section that the star icon does not read the

  Hello. My Bookmark star icon does not read my favorites. I can always use it to record the new bookmarks, but I don't see the 'old'. My Favorites are still there, but the star remains white when I open them and shows them as not saved. Thanks in advance for any help!

  Some added addons toolbar and anti-virus are known to cause
  Firefox issues. Disable all of them.

  When the star is to check the Bookmarks Manager, he must control
  all the entries in the file. It could be that the bookmark of the webpage has been deleted.
  Or the sea address have changed. I'm not aware of entries to the
  bookmarks being blocked, unless you have something blocking the changes.

• Satellite T130 - 10G: Firefox does not read any video or flash content more

  My Firefox does not read any video or flash content more. And in watching the news of repair troubleshooting/malfunction in Firefox under graphics, he said that "Direct2D activated" and 'WebGL Renderer' have been blocked because of the version of the graphics driver.

  I downloaded a new version on the Toshiba site, but an update of the driver can not find the new version.
  I had briefly solved the problem by installing the new driver from the file but it is not recognized in Device Manager.

  Automatic update through Windows just tells me that the driver is up-to-date.
  I have the Satellite T130 - 10G.

  Would be great if someone could help.

  Thank you!

  Hmmmm... as you know Toshiba doesn't support third party software so I think that your question has nothing to do with Toshiba directly.

  You find the same content with other browsers?

• Portege R500 - after what ODD hardware upgrade will not read

  Recently, I bought a vintage 2008 Toshiba R500-11Z laptop ultraportable. He needed a new keyboard, because most of the keys are dead, so I bought a new replacement (exact same keyboard, an eBay seller). I also decided to give a new breath of life by installing a SSD drive. The old keyboard was attached to the frame with some sort of sticky back plastic, which is not reusable, so for the new keyboard, I used a strong adhesive tape double-sided. Before you screw the plastic rear landing gear I installed Windows 7, with the loosely adapted landing gear up. Installation of Windows is complete and everything seemed fine. After screwing in the landing gear, I discovered that optics player his original "open-top" mat * a DVD-RAM UJ - 844-S would not read disks. He just made a noise 3 times but does not spin then upward as it normally would. Drive is visible in Explorer solutions and Device Manager.

  After unscrewing the undercarriage, the relocation of the optical drive and rescrewing several times, I was not able to get the optical drive to play all discs. What I created is that the disc must be catching on the ceiling, thus signalling the reader to turns don't not upward; leaving the screws each side of the lander was allowed to create a gap, so there is more room between the optical drive and the ceiling of the laptop. Disks will then turn upward and Windows AutoPlay will open to them. What I can't work, it's what has changed in regard to the way in which the drive is mounted and its position relative to the ceiling above him. Or if the reader is now trying to turn a corner. There are two blocking screws that hold the drive in place, so that the reader must be at the same place its always been.

  I was wondering if anyone has come across this problem before, and if there is an easy solution. According to me, I hit a wall of bricks on this one!

  Thanks in advance.

  Just to say, after a lot of head scratching, I worked on the problem. I had made a mistake by attaching the clamp metal Assembly at the rear of the optical drive.

  I had screwed the clip outside the Orange connector when he had to be inside (between the optical drive and the orange connector). It seems that it must have pushed the player to place just enough to prevent it from functioning properly.

• My memory card is not read

  Hello!

  I'm having a small problem. My computer has a location where it says SD/MMC, so I inserted my memory card, but nothing has popped up. I went to my computer and apparently it don't the had not read. What should I do? There is a small green light on the computer indicating that it recognizes that there is a card in there, but not on the monitor. Help?

  -Naomi

  Naomi, welcome to the forum.

  When a help request, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  Are you sure that the memory card is the correct format for the reader?  It is the most common problem, we see.  In addition, the reader has read the card in the past?

• Help: Monitor loading READ in F5 from Sony

  Can't find much on the subject. Settiings on the camera are grayed out and I can't understand how to load to READ just for the use of monitor (not cooked in the SxS film).

  IM on firmware v3 on a sony f5 and want to have an option to use a LUT on the VF as well as go out with SDI to my SmallHD AC7

  LUTs are only available in mode CineEI.

  Select the AE Cine mode in system > Basic setting...

  Lut can then be selected via the side panel or via the menu video > MonitorLUT.

  If you are working in custom LUTs can not be selected.

  Best regards, Clive

• Global has not read breast all loop - but Local is

  I have a face before written to a variable switch, so it should be read in a while loop.   If the variable is local, it is read and my code works, but I need to do a Subvi the inner loop, so it seems I have to use a global variable - but then it is not read, and the code does not work.  I am very new to Labview and I do not remember this difference being made watch anywhere.  I posted a very simple example.

  Instructions: Click on SW - LV, the beginning of the inner loop; Turn the switch off, inner loop stops.  Click on SW - GV to start the inner loop, but the inner loop does not stop by turning the switch.  If I go on the front of the SW - GV I can stop the inner loop.

  Any help woud be appreciated.

  I use Labview 2011 assessment and Windows 7.

  You are a little out of your reasoning.  I'll explain what continues.

  The outer loop runs in the lower loop and the inner loop runs once per iteration of the outer loop until the value of SW - LV is True. Then the inner loop starts reading the value of SW - LV each iteration until what you press the SW - LV thw to witch point passes the value of SW - LV (believe me, tearing up the Local write on and it works the same)

  The top loop: outer loop runs and the inner loop runs once per iteration of the outer loop until the value of SW - GV is true AND The Global is written.  Global cannot be written again in this loop as the outer loop is waiting for the inner loop at the end (you have a classic blocking!)  Written across the world elsewhere (as from global itself, breaks the deadlock)

• Free extractor error - could not read the news SFX

  I hope I am in the right forum!

  I am downloading Gamblock on my laptop, but when I run the file and try to check out I get the error "FreeExtractor error - an error prevents this program to continue - could not read the news SFX - it is probably corrupted.

  GamBlock are several that this isn't a problem with the link, and to be honest I have not had problem with it in the past. I am at my wits end with it but now and wonder what it is that it blocks and think it must have something to do with the system in some way.

  The laptop is brand new

  Any help would be great!

  Hello les150,

  I suggest that you run the System File Checker to see if you have corrupted system files.

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Restart your system

  Now run the command chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If please reply back and let us know if this helped with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP a1630n will not read new SanDisk UltraII 4 GB SD card

  My memory card reader will not read my new card, SanDisk Ultra II 4 GB cards memory 15 MB/s.  I have 4 cards.  I have reformatted all 4 in my camera and they work fine.  When I insert into the card reader, I get a "Please insert card into the drive H:" pop up.  I used the same procedure with my old card SanDisk Ultra II 1 GB card and there is no problem with him.

  I need to update my drivers to read the fastest memory card?

  Model: a1630a

  Product: RC658AA-ABA

  Build software: 64NAemMPA4

  Thank you.

  Hello

  Many readers of cards have been created before the SDHC technology became available and are not able to work with the new format. For example, a memory card reader that was made in 2002 is capable of reading a card Secure Digital (SD) 1 GB, but can not read a 4 GB card.

  Please note that the card drivers memory are installed automatically by the operating system.

  To use your card memory of higher capacity without blocking the computer, do one of the following:

  If you use the card in a camera or another device, you can connect the device to the computer via a USB or FireWire cable. When connected, most devices appear as a removable drive in Windows and can be used in the same way as the card reader.
  Buy a USB memory card reading device that plugs into any free USB port. Make sure that the USB device is able to read the SDHC. These devices are fairly inexpensive and can be used in any computer equipped with a USB port.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• Attached to a letter from Apple is not read by windows computer

  Attached to a letter from Apple is not read by windows computer.  No current attachment.

  If you plan to support, you must provide much more information. Tell us exactly what you are doing and what is happening, including at the receiving end.

• Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

  I'm a big supporter of Toshiba product.

  Please help me

  Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
  My * DVD UJ-845 s * do not read any CD or DVD.
  Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

  The system to recognize it. The driver is installed and working properly.

  After I installed supports DVDRAM of Toshiba.
  The same thing occurs when playing a CD, the system tells me:

  * E: / not accessible *.
  * incorrectness function *.

  I try with a program on the net but no way.

  I was well able to put the original firmware, but I could not find.
  If someone can do a dump of the original Firmware for me it will be a miracle for me.

  Help, please.
  My great respect.

  I think I can help you:

  Go to my computer right click on the CD/DVD drive.
  Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
  Now click on apply and restart the laptop.

  Check of workaround and post comments