Blocks wireless HP Photosmart C4580 printer

Similar Questions

• Photosmart C4580 print without wires after installing Snow Leopard

  Hello. I recently installed Snow Leopard on my MacBookPro. Since then, my Photosmart C4580 print wireless. I checked the updates of the software and the message computer read that I was up-to-date so I don't know what to do. Any suggestions?

  Geez-you are a genius! Thank you very much - your solution has functioned perfectly!

• Photosmart c4580 print problem

  Hello, I have a photosmart c4580 running on wifi... I have two mac osx on 10.7.4 but when I print, it says 'printing 100% ' then I get a messase saying 'this printer is not responding' IV ' e removed the software from the computer off and removed the printer and reinstalled but it still has the same problem...

  Can anyone help?

  Thank you

  Daniel

  Unfortunately, the problem of compatibility makes it is a bit difficult.  The update of the firmware will fix the problem, but it does not work with 10.8.

  The only way to get the updated firmware update is to find a system that uses OS X 10.5 or more.  The update utility lists Mac OS x 10.4, Mac OS X 10.5 and Mac OS X as in charge.  I suspect that the last option, although it is not listed, is 10.6.  10.6 may work, but I recommend you find a 10.5 system to ensure the update will be a success.

• Photosmart C4580: How can I configure my Photosmart C4580 printer for wireless printing?

  Hi, I changed my wireless network name, so my printer is no longer connected to it.

  I tried to set up the new name wireless using Windows 10 but I can't figure out how to do it. I tried to do by using the HP Solution Center software, but I get this message (see photo).

  Can anyone help to reconfigure my printer?

  Thanks for your help.

  Hi XE1RDR!

  Let me show you how to install your printer to your computer windows 10. But let me put your expectations that the printer driver may or may not work because it has already exceeded and your current operating system is the latest Microsoft.

  Well, lets move on to serious things.

  1. first of all, you must have the printer attached to your computer USB cable/cord.

  2. then download the driver complete features of the printer by clicking on the link: http://support.hp.com/us-en/product/HP-Photosmart-C4500-All-in-One-Printer-series/3575173/model/3575174

  -Select SOFTWARE and DRIVERS

  3 download the full driver

  4. run the file and install the printer through the USB port

  5. once the installation is complete, run the program again

  6. this time, select CONVERT to without WIRE USB

  7. continue with installation and the last part should ask you to remove the USB cable to complete the installation

  Your printer must be set by default, and then try to print.

  Good luck bro!

• Blocking of the Photosmart 5510 print job

  I get no output from my wireless printer. So, I checked the print queue and saw print jobs lined up behind a print job that I don't recognize that blocks all my legitimate print requests. I highlighted this first line and tried to delete. In the status column I get "delete - print" but employment niether draws or losses.

  What other option I have to remove this line so that I can start printing again?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• HP photosmart C4580 printer

  I would like to know if this printer is compatible with Windows 7.  The seller says that it is (!), but the documentation I've seen mentions only XP and Vista.

  Thanx

  JeniD

  Yes. Download the drivers from HERE.

• HP Photosmart C4580 Wireless - can't get to work

  I just had to get a new computer and a new printer.  While I was there, I set up a wireless network.  I am running Windows Vista 64-bit on the new computer (gateway) and a HP Photosmart C4580 printer with wireless capability.  I can't the printer to work regularly.  Whenever I have reinstall, it works very well until it's the computer goes to sleep or stops.  Then, it no longer works.  Reinstall... it works... sleep, it stops working... vicious circle.

  I spent hours with HP cat trying to solve this problem and even more time to try to find me a solution.  This is my first HP product and I must say that I am at the end of my mind with him.  I can't believe that I'm the only one on Earth with a similar problem, but I can't find any help anywhere.  I'm sure I'm doing something wrong, but I did not have enough experience to understand and can't seem to find someone who does.

  I'd appreciate any help I can get at this point.  This is my last resort before you give up and go back to Dell!

  I have a few questions and suggestions:

  1. The IP address of the printer, the computer or both changes over time?
  2. I recommend that you set a computer DHCP reservation and the printer.  Connect to your wireless router, look for LAN Configuration, address reservation.  You should see a list of clients connected to the wireless router.  Define bookings of at least the printer and the computer.
  3. The SW (sorry about that) to uninstall and reinstall.

  With the IP address of the computer and the printer now set, the SW should not have problems to find the printer when it wakes up from sleep (I hope).

  BTW - unless you are using a surge protector, very inexpensive, the printer should be fine tuned on.   I think that the Councils to plug the printer directly into the wall, as a way to solve the problems SW is very interesting.

• Photosmart c4580 color print number / iMAC OSX 10.5.8

  Connected to a HP Photosmart C4580 printer via "wireless".   Although Print 'presets' show the color still seems to me that power print in black and white. System preferences under "Printer" Apple doesn't give me an option option color/black and white?

  Also checked and my HP software updates are all up to date. When I select 'Preview' option on PAGES/FILE/PRINT the document is displayed in colour - but printer still prints in black and white!  Advice please?

  Shlomi

  Thank you so much to also answer my question "Forum Apple."  I used the Apple forum link http://support.apple.com/kb/HT1341 that you kindly referred me to-which worked like a charm!

   

  Your suggestion has finally solved the problem of color printing.

  Lance

• Problems to install the driver for printer HP Photosmart C4580 point Windows 8.1

  I bought a new laptop (Asus i7 with Win 8.1) and I'am trying to install the current driver for my HP Photosmart C4580 printer. I downloaded the driver full HP website: size 233 Kb, but when I try to install it I get the same message: ' Impossibile find it file specificato: c:\Users\Appdata\Local\Temp\7zs08EC\Setup\hpzpnp.ic...» »

  Please help me. TXS a lot.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Print HP Photosmart C4580 cartridges missing or not detected

  Hello.

  I have the HP Photosmart C4580 printer, printer all-in-one, and every time I turn on the printer, I would get the message that the cartridges are missing or are not detected. I tried the solution from the cartridge and the message still appears. I tried cleaning them and then unplug the power cord and it still shows the error message.

  I tried to print before and it was fine. But sometimes shortly after, the message appears. I really need to find a solution soon because I need to print some documents.

  Anything is appreciated!

  Hello

  I suggest you contact for manufacturer of hp. Given that the problem is related to the material.

  For more information, see the link

  http://welcome.HP.com/country/us/en/contact_us.html

• cannot configure photosmart c4580 to connect to my wireless network

  I tried to connect my photosmart c4580 following your instructions and got to the last step and after I hit APPLY, the grip of the page for a while then it says "the server where the page does not.  I hit refresh several times but no luck.  I'm stuck.  Any suggesstions?

  Hi @BossLady2,

  Welcome to the Forums of HP Support! I see that you have problems affecting the printer through the network wireless on the Mac. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• I have a Photosmart C4580 all-in-one, do I need a wired connection to analyze instead of the wireless

  PhotoSmart C4580 - windows 7 - wireless set up - how to scan? No problem to print or copy, except the printing from the internet. Keep getting errror occurred in the script on this page. HP does support not any help so far

  Thanks Sabretooth04 works great now. Much better than with an old computer and printer just to analyze something

• Photosmart C4580 HP dv7 notebook wirelessly and not a router...

  Hello

  I bought one for features wireless Photosmart c4580 because we are on the road a lot, but I can't seem to set up.

  I have a broadband connection to the usb Pantech Verizon for internet and I guess it does not recognize that.

  How would I go all setting this up with my HP dv7 laptop with Vista 64 without router?

  I use Norton Internet security. Don't know what the hell I do

  Thanks for the help ():

  Thank you so much, Jim B, for your time. I appreciate it! Your instructions worked and the printer print wireless!  Fortunately, I have to print all day.

  Have a nice day, Jan

• HP Photosmart C4580 Wireless problem - Snow Leopard

  Hello

  My HP Photosmart C4580 has worked for wireless (albeit a bit slowly) until I made 2 changes:

  (a) I changed my router SSID (network name) and password

  (b) I have upgraded from Leopard to Snow Leopard

  At first I tried to use the HP configuration utility to reconfigure the network my printer wireless.  It doesn't not work - he told me that my printer to be connected via USB, while he was already.  I tried different things and ended up reset wireless to the printer (using the printer menu).

  Then, in the HP that I read that HP utilities do not work with Snow Leopard help files.  But the instructions for wireless network with my snow leopard printer did not work.  I could install my printer via USB (and downloaded driver), but it does not appear on the list without wire.  I couldn't find a way to configure wireless with USB connection, as I already had when I initially set up my printer with Leopard.

  Video instructions to set up wireless for Mac (http://h30434.www3.hp.com/psg/board/message?board.id=Macintosh&thread.id=231) seemed promising, because it would finally give me a chance to give my printer on my network information.  Wireless Network Test report gives the network name (SSID hpsetup) (since I have reset the settings), that I found promising, although only under IP address, he said 'not applicable' (and obviously fails it test under 'Network name found' failed-it).  However, my macbook can't take any hpsetup network and on the network Page Configuration I printed the network status is 'offline', Active connection Type is None, URL is 0.0.0.0.  Apparently my printer cannot connect to this network hpsetup.

  I have spent a few days on this and I am completely at a loss to know what to do.  Can someone please advise?  Thank you very much.

  OK, we can solve the problem.

  First you uninstall the 10.5 HP software before installing 10.6?  If this isn't the case, we might as well do it now.

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt, as well as Apple and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)
  Click on continue
  Let the cleaner it is.

  Then, remove the printer in System Preferences, Print & Fax.

  After that, go to hp.com and download the 10.6 complete package

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-74785-1&LC=en&DLC=en&cc=us&lang=en&OS=219&product=3418707

  Having attached to the C4580 usb cable and select Wireless when you can.  Follow the rest by.

  I noticed problems where people have "special" characters in their password wireless.  If it fails, and you have no alphabetic characters or digital, you will need to go through the process of hpsetup ad hoc, as detailed in the video you mentioned.

• Photosmart C4580 all-in-One - color print is not true

  Regardless of the software application in use, our printer does not print the colors on the screen. We have worked through all the settings and the types of paper and color choices, and nothing seems to make a difference. Tonight I prepared a certificate using PowerPoint and one of the predefined themes - nice blue background prnited on a Brown dirty. Ideas, suggestions, etc.?

  Hello there Hermits2,

  I saw your post on the issue of "print quality" you have little matter where you want to print from your Photosmart C4580.

  I understand that you have already tried several troubleshooting steps however, browse the guide below and if anything that you have not yet tried, try them. The print heads could very well be on their way if do not help the steps. If this is the case, then I would say calling HP support to see about a trade in option for you.

  Missing colors in printing

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Monday