Blocking of the Photosmart 5510 print job

Similar Questions

• The photosmart c8150 print with the new ipad

  The photosmart c8150 print with the new ipad?

  Hi toddgas1,

  Unfortunately, this printer does not support Airprint or ePrint.

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• How do the reset full on my photosmart 5510 printer all in one

  Hello

  I would really like to complete reset of my 5510 Photoscmart instructions.  We do not print black.  I have changed the cartridges twice, cleaned the heads of printer on the screen and with a damp cloth (as shown on Youtube) but still no black.

  Can you help me!

  The printer is out of warranty.

  Nicola

  (UNITED KINGDOM)

  Thanks for the reply Nicola!

  With this information, I'll send you a private message to gather additional information. If you are unsure how to check your messages on the forum this post, has instructions

• HP Photosmart 5510 'Printer offline' show

  To the right,.
  
  I started having a problem with my HP Photosmart 5510 - running on a Mac OS x 10.6.8 computer wirelessy.
  
  Until yesterday, I was able to print wireless towards her, even when he was asleep he wakes up and print.
  
  Now, however, I get a "Printer offline" message whenever I try to print what he's awake or not and I have to turn on the printer and on again before it prints.
  
  My printer HP utility can see the printer and it is connected to my network.
  
  Any help would be appreciated,
  Thank you
  Ronan

  I found this on the Apache site:

  "You unexpectedly see an Apache HTTP Server installation page when you visit a Web site. If you sent us mail because you have seen a page saying "it worked!" (or something similar indicating that Apache has been installed) on your screen or a Web site you have visited, please go back and READ the page. It must also specify what happens. The page is the equivalent of a demo or the Readme file from a Windows installation of the application; It is intended for the person who has installed the software and is supposed to show that the installation has been completed successfully. The problem you are experiencing has nothing to do with us, and we cannot help you. You must contact the webmaster of the site. If the site is www.foo.com, for example, try to send mail to . If it is www.toddsbeer.org, send an email to . And so on. »

  I think that there is something funny, with (probably your DNS of ISP) your router's DNS settings.  You can enter the configuration of the router and change the google DNS or OpenDNS DNS?

• without the Photosmart 5510 ink cartridges Control Panel cannot be accessed

  I have a Photosmart 5510 which has no ink cartridge. My intention is to use it to scan only, and I would like to be able to set up wireless. When I turn on the printer, the control panel displays this: "problem of ink cartridges.  One or more cartridges appear to be missing or damaged. Install or replace the affected cartridges. »

  The wireless button or the ePrint button cause anything to appear on the control panel and there is no other options, such as cancel or continue.

  Is there a way to go beyond this message of ink cartridges without installing cartridges?

  Hello

  In general, I'm afraid the answer is no, as a multifunction device, it requires the ink required to operate the device but there are of the workarounds you can try.

  That there is a problem with one or more of the ink cartridges should be sorted first, the control panel will not answer while the device is in an error state.

  You try to use the computer temporarily plugging in a USB port on the printer.

  If the printer is recognized by the PC in such a State, let it finish its configuration and open the software HP Photosmart 5510.

  Open the utilities tab and click on Setup & software printer, then click on convert USB to wireless and follow the steps on your PC.

  If this success then run a scan of your PC use.

  If it is not detected, which is likely to be affected by the error status of the device, such you will solve the problem first.

  You can follow these steps to solve a problem of cartridge if necessary:

  http://support.HP.com/us-en/document/c02924284

  Kind regards

  Shlomi

• How can I install my HP Photosmart 5510 printer on my computer Windows 8?

  I just bought a Toshiba laptop with 8 of the window.  In recent months, I bought a Photosmart HP 5510 printer.  The installation disk will go up only to Winows 7.  How can I install the printer on my new computer?

  I included a link to the drivers for your printer. Click here for the drivers.

  Let me know if it helps.

• Photosmart 5510: No color on Photosmart 5510 printer printing.

  I've purcheased new cartitgages. I shook the cartiratages. I tried the cleaning function, realign, even the old hit on the machine of Nintendo days tour! I am completely lost as to what could be the issue. It prints black, but black only. It does not read even the new cartriatages as full. I bought office depo. Please help me!

  Hello

  Welcome to the HP Forums!

  I understand that no color is printing printer Photosmart 5510. I'm happy to discuss this issue for you!

  Please take a look through this guide, the printer prints blank Page not printing black or color ink for the Photosmart HP 5510 e-all-in-One Printer Series.

  If you've been through all of these steps and the issue is not resolved, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  I hope this clears things up for you!

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• HP Color LaserJet CP2025dn UPD: Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

  HP Color LaserJet CP2025dn will be printing and stop suddenly and get into the routine cleaning or a calibration for no reason apparent.  This will be the last 5-10 minutes and then resume the print job.  It was produced for each 2-3 pages it prints.  I provide support for a medium-sized company, we are a print HP shop all, we use

  HP Color LaserJet CP2025dn UPD PCL 6. can someone help me solve this problem please.

  Thank you

  You must make changes by using the SAP or box below to tools:

  * Do not change/modify all settings for printer drivers. Let the printer with the default drivers.

  In the System tab and the management of the paper:
  Default paper size: letter or A4 size
  By default paper Type: plain
  Manual feed: Off
  Tray 1 size: any size
  Tray 1 Type: All types
  Tray 2 size: A4 or letter
  Tray 2 type: heavy 111-130g
  Size tray 3: A4 or letter
  Type tray 3: heavy 111-130g

  In document manipulation:
  Select specify time and Action.
  Paper at a time: 0 seconds
  Paper action: substitute

  In the tab system and print quality:
  Calibration of market: 60 Minutes
  The calibration setting: 168 hours

• Windows 8 drivers/software for the Photosmart C7280 printer/Scanner

  Hello

  I have a HP Photosmart C7280 printer/scanner. I have recently installed Windows 8 Preview Release and discovered that the software I have installed Windows 7 doesn't seem to work as well. On the Setup, the only butotn displayed is "Exit" - that's why I can not install the software and drivers.

  Are there solutions available for Windows 8 again (even if its only beta software - I'm happy to give it a go)?

  Thank you

  Jamie

  Hi Travis_C,

  Thank you very much for the reply.

  What happens to me with respect to scan using Windows' built in the analysis Assistant which is OK but that only gives me the option to save as a bitmap, .jpeg, .gif, .png or .tiff.

  Software of HP that I used in Windows 7 accepted save me the scanning to PDF which is what I want in this case. Is it possible to get this software to run in Windows 8? In addition, will you be brining a version of Windows 8 of this software?

  Thank you

  Jamie

• Cancel the non-existent print jobs

  Every two weeks or so my computer stops recogizing my printer.  I liquidate uninstall and reinstall everything and the pilot with hit or miss the chance.  Today, I am unable to uninstall the drivers due to "one or more print jobs pending."  There is certainly nothing pending.  I even stopped and restarted the print spooler.  How to remove non-existent print jobs or force uninstall of the printer driver so that I can restart and re-upload?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• Prevents printing on the bottom HTML print job

  I have a print job that is set up in a Flash animation which works perfectly - during testing. As soon as I display the swf file in a browser window, the print job is the same as in Flash, but he captured the background color of the HTML page. Is there a way to get around this? My doc flash background is white, but my HTML experience is green. If the printed page is showing green background when I print from the swf file in a browser window.
  
  Is there a way to get around this?
  
  Thank you
  
  Julia

  I thought about it - she had nothing to do with my background HTML - all with tags in my HTML code to embed document. In case someone else has a similar problem: in order to have a movie background color to print dynamic content on white, I placed a white box in my clip at once the print job is created and developed across the box to the height and the width of the print job.

  Hope that helps!

• HP Photosmart Premium 310 has: not be deleted from the queue at the end of print jobs.

  Printing problems with Photosmart Premium 310 has.  Last job have not removed from the queue of items to print, even if the work is completed.  I have to go to the screen that shows what is printing and delete the item that was printed before the next item in the queue will be printed.  Any suggestions to fix this?

  Hello @shumaung and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing speed.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Blocks wireless HP Photosmart C4580 printer

  Hello

  I have a HP Photosmart C4580. It was connected to my Wireless network. The other day I decided to change SSD and WPA key my route for security reasons. The printer has stopped working so I again installed the software so I could configure the network printer information.

  Problem is that now it never acknowledges that the printer is active wireless. I tried in a computer with XP and a macbook pro with snow leopard. In both cases the critical points of configurations in trying to find the printer. I realized that something happened to the printer wireless radio, because when I run the printer, the wireless has become active and then it stops just the printer. The buttons and the display of the printer becomes simply does not. Likewise, I can't get the printer because the power button is unresponsive. I have to disconnect the printer taking and during startup, go to wireless menu and turn off the wireless radio, so it is not blocking the printer quickly. I also (at start and quickly) restored the default radio wireless configuration. But that has not solved the problem. Also tried to reset the printer unplug the power cord in the back and in the decision-making. Nothing has changed.

  I have no idea what makes the printer freeze. Probably something with the edge router? I just change the WPA key and SSD.

  Thank you in advance.

  Hello

  Take a look at this ad because it has a solution on the WPA encryption Open to change.

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/C4580-change-wireless-settings-from-open-to-WPA/TD-p/158877

  This should give you a few pionters.

  Good luck