Device error - sense Code (5-26-00)?

Similar Questions

• Error message "device error - sense Code (6-28-00).

  Try to burn a project composed of MP4 video files (about 2 1/2 hours in length) and when it reaches about 97%, I have this message "Device error - Code detection (6-28-00) - no loan average exchange" and then first elements 9 processes in order to burn a perfect DVD with menus and everything.  Any ideas?

  SenseCode errors are often caused by hardware problems with a multi-lecteur (burner) and can be perhaps old firmware in the Multi-lecteur, or connection problems on the network, between the Multi-Player and the operating system. I would first check the updates of the firmware of the mfgr of the multi-lecteur. Web site. Don't forget to read the instructions for "flashing" the ROM with updates firmware - VERY IMPORTANT - follow these instructions to the letter!

  They can also be caused by problems of blank media, like bad blank media, non - RW media, which has already been used or RW, which has not erased.

  What brand and type of blank media are you using?

  Good luck

  Hunt

• "": Blu - ray device error "', '3' Code, note:" CreateStcSequence: cannot write the file of the M25. "

  I get this error message about 11 GB when burning a 22 GB Blu - ray. «Blu - ray error: "device error", the '3' Code, note: "CreateStcSequence: cannot write file M25.»» I tried almost everything as administrator, starting a new project and change the disc. I use CS6 and mad... any ideas?

  It worked for me! I built my project to a blu - ray image, then burned a disk from the image without any problems. Maybe it's that you must try then too!

• sense code 43e02

  Authoring of disc in Encore.  I got this error:

  "Still could not complete the operation due to a hardware error (sense code 43e02).  Contact the manufacturer of the hardware for more information. »

  I have a machine ADK Media

  Intel i7 - 3770 k cpu @3. 50 GHz

  32.0 GB OF RAM

  64-bit operating system

  I'm burning Phillips + R double layer

  I opened again as administrator

  I tried to burn it on the slowest speed

  I tried to burn a small project to a disc single layer and got the same error.

  rebooted and tried to create the new project with one of the same files - error

  created an image disk successfully

  I am running CS6

  Help

  > successfully created a disk image

  Use the FREE http://www.imgburn.com/index.php?act=download to save files or folders or ISO on DVD or BluRay drive (send the author a PayPal donation if you like his program)

  When you write on the disk with Imgburn, use speed SLOWEST possible setting, so your burner has the best chance to create "good, well trained" laser drill holes... Since no DVD drive is required to read a burned disc, have a 'good' after a try to white high quality will help

  Use Taiyo Yuden simple layer or layer two Verbatim or Falcon Pro for layer two printable inkjet

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I/O device error code: 10 and if I can't open my memory SD/MMC card when it is inserted.

  Original title: why I can not open my card memory SD/MMC when inserted?

  What is the problem & how do I fix?  . I/O device error code: 10 when I try to read from memory card.  OS: XP, 32-bit Clean up memory and maintenance?  Never had a problem before.          Teddi

  Hi cindy,.

  Did you the latest changes on the system?

  You can read the following article and check if it helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.

  Original title: windows 7 backup of IO error 0x8007045D

  I tried to back up my hard disk but to halfway through it says I/O device error code: 0x8007045D.  I disabled mcafee to see if it was interfering, but that did not work.   I have an acer aspire laptop with windows 7.  I was not able to save anything.  Does anyone have any suggestions?

  Sheila,

  This can happen if your virus scanner (or another application of heavy disk activity) access to training. You can try running chkdsk in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you run chkdsk in safe mode and you still have problems of backup, try to perform a clean boot to disable all third-party applications and test support upward:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save the 0x8078002A error code. The request could not be performed due to the i/o device error (0x8007045D).

  I tried to backup my C folder on a hard disk extrenal and received the following message:

  
  OT: Backup failed Windows7 0x8078002A error Code.
  Quote
  One of the files of backup could not be created (0x8078002A). The request could not be performed due to the i/o device error (0x8007045D).
  End of quote
  Can someone advise me?
  Nitin

  Hello

  Method 1
  Check the shadow copy Volume service in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. Locate the Volume Shadow Copy service

  Make sure that the startup type is automatic. Steps to set the auto services

  a. Locate the service

  b. right-click on the service

  c. If the service is stopped and then starts the service

  d. Select Properties

  e. and in startup type, select automatic

  Method 2
  Try the steps listed in the link below: error message when you try to perform a full backup on a Windows Vista-based computer: "the request cannot be performed because of an i/o device error":http://support.microsoft.com/kb/952272 (for Windows 7)

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• loading photo to DVD files, have I/o device error:-code 0x800745D

  I'm in the middle of the copy of certain records of picture on a DVD, it fails to do the job and come with I/o device error. the error code is 0x800745D can you explain?     concerning the

  Hello,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it looks that you are having problems with the 0x800745D error code when you download photos on DVD.

  1. the error code is 0x8007045D?

  2. were there any changes (hardware or software) to the computer before the show?

  Check the disc and see if the problem persists.

  Check a drive for errors (Windows 7)

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.

  Meet us if you encounter problems with downloading the pictures on DVD or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  I just lost 2 Blu - Ray discs, try to burn a project. I tried to burn a very simple project: a chapter two Blu - Ray with two episodes of 55 minutes of a TV on this topic show.  Recently I used the exact same computer to do exactly the same work successfully, so I don't know what the problem is.
  There are no menus in the project: it's just a rudimentary auto play disc with stereo sound.  Layer the watch 24.37 GB used on a single BD disc.

  The files are consistent and that construction starts, the following error appears:

  Blu - ray error: "device error" Code: "3", note: "AS-StorageError =-97060.

  System information:

  Windows 7 Professional

  Service Pack 1
  Intel i7 8 cores @ 2.80 GHz

  12 GB 1600 RAM

  AMD Radeon HD5870
  File HD 7200 RPM WD 3 TB NTSC system

  Pioneer BD - RW BDR-206 ATA burnerncore

  Adobe still CS6

  I do not see another example of this type of error the "97060" in it.

  I never have confidence I think remember me this, but note that the GB 24.37 may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get another error, but who knows.

  I would try the building to a folder to see if this succeeds. Then you can return to the question of the combustion. Many of us prefer ImgBurn to burn and not yet.

• In a work previously Win 7 Pro Shuttle system, we are now "this device cannot start (code 10)" with high defination driver.

  The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ.  The sound is integrated 5.1 audio channels.  This works installed sense July 14, 2011.   We now have no audio.  After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?

  Hi Jack,

  You did changes to the computer before the show?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you try the steps from the following link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/en-us

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services