Channels disappear in WMC at the output via HDMI

Similar Questions

• How to get an audio output to the TV via HDMI on my satellite

  I have connected to the TV via HDMI to view downloaded content from BBC.
  How can I get the sound?

  Go to the control panel-> Sound-> playback tab
  Here you must choose a digital output as default device.

  Also check this:

  + HDMI port allows her too?
  + http://aps2.toshiba-tro.de/kb0/FAQ9401AY0001R01.htm

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• 750se envy: envy of the brand new office no signal to the monitor via HDMI

  Just got my new 750se envy and 25 x 25 backlit monitor. After putting it all together, I connect the monitor of the Tower via HDMI. Tower boots, display lights, I pop in setting up the drive, but the monitor says that it cannot find a signal. I test my old monitor to the new Tower (a monitor of series pavilion aged 7 years). Same results. The Tower seems to be the treatment given that you can hear what it read the disc.
  
  I take another hdmi cable and and test exactly as described above. New monitor, new Tower and new hdmi cable still no signal. Old monitor, new Tower and new hdmi cable still no signal.
  
  Just to be sure, I plug my new monitor to my old HP Pavilion desktop computer. Tower lights up as usual, and the new monitor immediately comes to life with color. I can safwly guess it's the tower. I open the side panel and check all jacks to make sure they are warm and fully attached. Nothing seems to be loose or out of place.
  
  I start to sting online for answers. I met this reset of the BIOS. Press F10 to 8 seconds, down, 3 times arrow, enter twice and restart. Nothing. Still no signal. Can I assume there is something wrong with the Nvidia GeForce GTX 960 and windows the cause? Maybe turn hdmi ports are messy? It was the only other subjects I really found on the issue. Everything seems to work, just no signal between the monitor and Tower.

  89kowens

  Since it is a relatively new machine, instead of hurt for hours to fix yourself, why not just let HP repair at our expense!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Good luck

• Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  ampawase wrote:
  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

• No pavilion dm1 sound when I connect to the tv via hdmi

  I put the HDMI as audio by default output when connected to the TV and have no sound.

  I've updated the Bios, graphics and driver sound but still no joy.

  Here are the details of the laptop if it helps...

  No. A2D08EA #ABU

  Serial number {removed privacy}

  Display graphics card AMD Radeon HD 6320

  The Windows 7 32-bit operating system

  All sorted now and works great

  After the recovery to factory settings, I tried connecting via HDMI on my main TV (Plasma LG 50PC1DA) and it still does not work... Tried another HDMI cable and still no joy with the sound.

  Tried the DM1 on two TVs (Samsung LE40R74BD of LCD and a Panasonic Plasma TH-42PX8B) and everything worked fine... Was not what anyone defined as default... Just connected via HDMI cable and all was fine...

  Hope this helps other users having the same problem

  Now for a couple of beers

  ATB Kev

• MacBook Pro & Samsung Smart TV: could not get the display via HDMI

  Hi Forum members,

  I'm not able to get the display of macbook to smart tv via HDMI cable.  Here are some of the conclusions that I have. Can someone please shed some light on this weird question.

  MacBook Pro Rentina 13 "El Capitan 10.11.5.

  Samsung Smart TV 48 "UA48J6200

  Crush - HDMI cable.

  
  

  -TV says 'No Signal'.

  -J' checked the cable is good since I'm able to get my Dell Latitude processors E7450 and controller display.

  -Go to Preferences > display. I see no possibility to detect the display etc...

  -Able to connect same macbook to the sony smart tv at my friend using the same cable and it's all good.

  At this point, I am not able to understand where is the problem... TV or Macbook

  Thank you.

  Hmm. Have you tried to get your friend or someone connect to your Samsung Smart TV?  It does seem like your Macbook or the cable are the issue.

  Edit: actually re read your post. I think that to see the option detect go to Preferences > poster under view press on and hold down the option key. bottom right, it should appear.

• Satellite A300 - 1GC PSAGCE connect to the TV via HDMI on Win XP

  Hey everybody,

  is it possible to connect an A300 1GC with Windows XP to a fullHD TFT via HDMI Port?
  I can't find the drivers for the HDMI port on the Toshiba support page, there is one for Vista, so it is not possible with Windows XP?

  The VGA port can´t normal display solutions-HD 1920 x 1080, correct? (ATI Mobility HD 3650, 1 GB)

  Thx a lot for your help

  Podozyt

  AFAIK for HDMI port you need separate driver. Audio and video signal should be addressed without any problem, but I'm skeptical about obtaining a full HD resolution.

• Satellite P200 - 1EE, problems of HD - DVD after you connect to the TV via HDMI

  Hello

  Like many others I have read on here that I'm too have problems with playback of HD DVD.

  However the difference for me seems to be that, initially, I was able to read my DVD HD (it was the movie 300 passing) until I tried to connect the laptop to my HDTV via HDMI (it is only 720 p not 1080i). He doesn't have to play with the message "not responding". Now, the HD-DVD will not play even on the laptop.

  Any suggestions?

  I tried to use windows restore without success and also tried to download the update of the driver, as described in other posts, but the download is not completed. (also I can't find an update of the firmware on the Toshiba site)

  Any help is greatly appreciated.

  Thank you
  John

  Hello

  After watching HD-DVD on your TV you have arrested film closed HD-DVD player, back switched to LCD screen using FN + F5 key combination and then disconnected the HDMI cable?

• How to select the output device HDMI as audio playback for Windows Media Center device

  Output audio media center units

  Hello

  I'm trying to set up my media center from windows to windows media center of output through a separate audio device audio device by default.

  In this case, I have hdmi output that I want to be the output for windows media center and my realtek analog to be the default for all the rest.

  So my overall question is how I make windows media center requires is not the default audio device.

  Thank you

  Andrew

  Method 1 is useless. Does that change the audio device by default in the system, what the user seeks specifically not to do.

  Method 2 has no effect at all on Media Center.
  The answer seems to be no, Media Center only works with the audio output device by default.

• Dv9260nr HP without the audio via HDMI

  I have had no audio through my HDMI at least a year now without any help from any internet research sources or HP technical support. When I bought my computer laptop, everything worked fine on a year ago sound through HDMI has stopped working. I put the output SPDIF sound as I always did in the past. I have updated my vidio of Nvidia drivers and cannot find archived former drivers for restore. The current driver that I have dated 01/30/09. It is the Nvidia Geforce Go 7600. I've also recently updated my laptop with a clean install of Windows 7 32 bit Ultimate from Vista 64 bit Ultimate. I made this not knowing that there were not any drivers that support Windows 7 for my laptop HP but nevertheless I like working with 7 much better. Anyone else with this problem and maybe a solution? Thank you!

  Hello

  Uninstall your current graphics driver from Nvidia system.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the old driver for Vista:

  NVIDIA GeForce series video Driver here

  I got confirmation from users with the same model that this driver solved that problem.

• ENVY 17-j053ea: no sound on TV connected to the laptop via HDMI

  When my laptop is connected to my TV via HDMI computer laptop if poster on the TV but the sound is played if the laptop speakers and not the TV.

  I had this problem since I bought the laptop in October 2013, while she was running Windows 8, it is now running Windows 10, which actually has no difference.

  I tried to update the drivers of graphics card (NVIDIA GeForce GT M 740), Intel HD Graphics 4600 graphics card and speakers. If I'm in the playback devices, that the TV does not, even when it is set to display disabled and disconnected devices, but I do not know why.

  I know that the problem is something to do with my laptop and not on cable TV or HDMI because it works with 2 other laptops in my house, and the TV is shown as an audio device on both.

  Any help or suggestions are greatly appreciated.

  OK, this driver must have worked.

  Just click on this folder 7-zip created because I want to show you where to find the driver.  We will now try to force the installation.

  Click on the file and it will show several records.  Click the DisplayAudio folder.

  Then, there are two folders inside this one.  Click on the top a list (6.16.00.3178).

  Then click on the configuration file IntcDAud and you will see the driver for the hardware ID you have posted.

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101.

  Close to this now.

  Go to Device Manager and click again on the HD audio device.  Click the driver tab.  Click on set to update driver.

  Select the browse my computer for driver again software option, but this time at the bottom of this window, select the let me pick from a list of drivers for devices on my computer.  Then click on disk and browse the right to this configuration information IntcDAud file and see if the driver will be installed in this way.

  If this is the case, restart the PC.  If it is not, unfortunately, I have no idea why this driver not install because it must have worked using the first method.

  But this lack of driver, that's why you have no audio from the HDMI out port.

• Firefox is not updated final 5.0b2 to 5.0 (beta channel) day after switching to the output channel

  I use 5.0b2. In b2, I went from the beta update channel on the channel of update release.
  Today 5.0 final is out, and Firefox does not update saying "your version of Firefox is updated.

  BTW, the "Channel selector" function is missing from the Firefox 5.0 and later versions. It has not been used as intended developers, so it's history.

  If the information provided from Helper7677 do not indicate that you have version 5.0 installed, download and install version 5.0 of yourself.

• P70 - A satellite - after victory 8.1 update no sound on the TV via HDMI

  Hello

  I bought my laptop 3 months ago and I didn't have any problems until today.
  Yesterday I updated to Windows 8.1 and since then, I have a problem with the HDMI output...

  I connect to my laptop to the TV and the video is ok but his continuous in the laptop.
  I go to control panel > Sound > playback, but the HDMI output icon is missing.
  I can only see the audio speakers (conexant HD Smart) icon

  I tried to restore my laptop to an earlier state (the only one I could choose was yesterday) and it worked fine, but when I changed my computer laptop and then changed again to a second display screen...
  . It happens again... Output HDMI icon disappeared again

  Anyone know if this has to do with the upgrade to windows 8.1?

  How can I fix because until yesterday, everything worked well
  Thank you

  P.D.: Excuse my English... I m from Spain

  I don't have this model, but on my Satellite everything works correctly after upgrade Win8.1.
  Have you installed upgrading Toshiba instructions and document of instructions to facilities offered on Toshiba download and support page?

  By the way: can you please send name of full model of your laptop?

• L750 satellite will not connect to the TV via HDMI and stops

  Hello

  When I try to connect my laptop Satellite L750 (a Conia Plasma) TV via a cable HDMI, the laptop screen turns black and becomes immune, while TV records the laptop for a second, but then said no signal. Even when I take the HDMI to the computer, the screen will remain always black, and I end up having to restart.

  I tried all the HDMI ports on the TV and the different HDMI cords without change.
  Other laptops will play on TV without problem and my laptop will join also the other TV more, so I'm completely at a loss as to why the two custom work together!

  Also (not sure if it is relevant or not) but when I press FN + F5 to display output options, the only option available is output to LCD display. Is that means the laptop will connect only with a LCD TV?

  Is it possible to change/upgrade, that?

  All advice from someone who has had a similar problem or help from someone who knows how to solve this problem would be greatly appreciated!

  Thanks :)

  You can use the HDMI out port in connection with all TVs and external monitor which favour the HDMI IN jack.
  The HDMI isn't limited to a certain TV interface.

  The FN + F5 key combination to toggle between internal and external monitor/display (if connected).

  In your case, there is an open question about preinstalled system.
  Do you use the operating system preinstalled by Toshiba or did you change it in the past?

  If you have changed the system, the problem could be linked to the preinstalled graphics driver.

  However, my recommendation is simple:
  First of all I recommend you to reinstall the graphics driver.
  First uninstall the installed driver (do this in Device Manager). Then download the compatible driver from Toshiba UE driver page and perform the installation.

  Now close the notebook. Switch on and press F2. Now, you need to access the BIOS.
  In the BIOS, press F9 to load default settings. After that, press F10 to save the changes and exit the BIOS.
  Now connect the laptop to the TV using an HDMI cable.
  Turn on the TV and then laptop.
  Shortly after, use the function FN + F5 keys to switch to the external video output.

  Good luck!