PC may have the connection, but why MAC cannot have Anyconnect VPN?

Hi, we have MAC and PC users. Two users could reach inside the network through ASA and Anyconnect VPN. However, MAC users can not have connection (please see screenshot in attachment). The output of the show run webvpn command is below:

Act(config-WebVPN) # sh run webvpn
WebVPN
allow outside
allow inside
CSD image disk0:/csd_3.5.841-k9.pkg
AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
Auto-signon allow ip 0.0.0.0 0.0.0.0 auth-type all the

The lack of configuration ""anyconnect image disk0: /anyconnect -macosx- i386 - 2.5.2014 - k9.pkg "all the time." We don't think that this is the reason why MAC users are unable to reach the inside of the network because we do not have this command for a long time. Any suggestions can give? Thank you.

Advertisement

> The question is that the command for MAC was not there for long. Why is it could work when the order wasn't there?

I don't know, but I remember that in versions, it was not necessary to have * all * images in flash. Perhaps this changed some time. , You upgrade your ASA recently before the problems began?

Tags: Cisco Security

Similar Questions

  • Mapping to a Windows 7 disc from a XP platform, it creates the connection but it says "share: denied \Access.»

    Original title: mapping to a Windows 7 disc for XP platform

    Hi all is there anyone who can help me with the mapping a drive of windows 7 from my xp machine? I shared the drive on the computer 7 and everyone has permissions with full game. I can map other machines windows 7 itself but not some xp machines. I can ping the machine 7 machine xp with the address and the name of the computer. Now when I map the drive to create the connection but it says "share: denied \Access.»
    Any help is greatly appreciated.

    Hello Jgg5037,

    Double check to make sure that all computers are part of the same working group:
    Disable host group on the Windows 7 computer:
    Let us know if any of these methods help you resolve the error "access denied."
  • Recently my messages in the Inbox are no longer visible. The command Find says that they are still in the Inbox but I juast cannot see them. What should I do to make them visible?

    Original title: Windows Mail

    Recently my messages in the Inbox are no longer visible. The command Find says that they are still in the Inbox but I juast cannot see them. What should I do to make them visible?

    Thank you

    Hello

    Go to your Inbox > click on 'View' on the toolbar at the top > "Current view" > "Show all Messages" is checked.

    See you soon.

  • How to remove photos from the iPhone but on mac?

    I am very new to my Macbook and just trying to learn the ins and outs. I've had an iPhone for a few years now and especially had a Macbook because I love my iPhone and needed a new computer.  My problem is, I'm willing to delete the photos on my iPhone to clear up some space, but keep them on my Macbook. Whenever I have delete a my phone is off, it removes off my macbook too.

    Whenever I have delete a my phone is off, it removes off my macbook too.

    You have iCloud library enabled, as well on your iPhone and your Mac? Then you sync the library on your Mac and your iPhone in iCloud. all photos are stored in iCloud, make you adjustments will synchronize to iCloud, and then the changes will be synchronized to all devices, so your photo library will look exactly the same on all devices.

    Do not delete any photo you want on any of your devices, if you use iCloud photo library.  To win the storage on your iPhone select "optimize storage. Then the photos on your iPhone will be reduced in the size of the file, but you need an internet connection if you want to see the full versions.

    If you want less photos on your iPhone to your Mac, do not use iCloud photo library.  Select only 'My Photo Stream' transfer photos from your iPhone to your Mac or use a USB connection. My photo stream is more economic, in any case, because it's free. iCloud library uses the iCloud paid storage and only 5 GB are free. If your photos need more storage, you will need a paid subscription.

    See these support pages: iCloud Photo library FAQ

    and: iCloud: get help using my photo stream

    If you want to turn off iCloud photo library, be sure to disable 'optimize storage"before do you. Wait for the full versions to download again to iCloud.

  • Laptop keeps disconnecting the connection but not others

    I have two laptop computers Toshiba Satellite A300D and A500-13F and a new Linksys WRT120N router. A300D has an Atheros AR9281 wireless network adapter, while A500 has Intel(r) WiFi Link 5100 AGN, and both have Vista 32. It's the A500 which keeps disconnect the connection, it's as if it keeps restarting from the router. It will do this every few minutes and I can't do anything normally on the internet.

    I tried to do something but nothing works. Updating the drivers for the adapter on the A500 does not resolve the issue, although A300D works normally without updates, so there must be something wrong with the adapter on the A500. I also have sellected maximum performance in Power Options > change plan settings > change advanced power settings > wireless card settings, because I read somewhere that energy-efficient settings can interfere with the adapter. I thought that this solution worked until he started to lose and by restoring the link again. Everyone guess what else could be wrong? I generally know how to fix things, but the wifi is a new thing for me and don't know much.

    Yes, in this scenario, this could be the problem with the adapter. Then I suggest that you contact the hardware vendor.

  • From high-speed wireless broadband with a cable modem, and shows the connection, but cannot access the web w / IE8

    I have Windows Vista, IE 8 and labtop HP Pavilion. I had just recently Cricket Wireless Broadband, with a USB wireless modem. I now have the Charter/Comcast broadband through my cable. The modem is connected to my PC via the Ethernet port. On the connection icon on the toolbar on the right down, it shows that I am connected. The "Local Area Connection Status" in the network and sharing Center seems to be connected, since bytes are sent and received.

    However, when I'm on IE8, it acts as if there is no connection. Not being able to view the web page. Also, now when I go to a local WiFi hotspot, I can't connect to a network, just as I always, and it shows that there is a link, however, it won't let me access the internet. It used to work, before everything first, I connected the cable modem.

    Any ideas? Thank you!!

    JFerguson15,

    If the Cricket connection works correctly but your cable connection is not, which suggests the computer is set up correctly and the problem is with the cable connection. All other systems are able to connect through the connection of the Charter? If this isn't the case, please contact Charter and see if they are able to determine the issue on their end or help you reconfigure the modem.

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Adobe Flash lost the connection @ 30%. Mac installation fails.

    I'm seeing this anywhere in the forums without anyone find a solution. I tried everything suggested in Safari or Firefox, including a clean install 3 times! Even after uninstalling and deleting the files flash in the library, when I try to download and install it immediately starts at 30% and then I get the error message "the connection interruption. Trying to connect... "it hangs a little bit and then I get"the connection has failed. Could not complete the installation. "I go to their link for assistance when the installation fails but the link which they suggest to download directly from the final step is"not FOUND ". See here: Installation problems | Flash Player | Mac

    This same link appears in several forums for a solution. I don't know what else to do. I write this option to add many others with the same question in the hope that Adobe will solve this problem! I'm on a MAC OS 10.9.5. Never had this problem before with flash updates!

    Solution found on another thread. Download the installer here offline: http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg

    I downloaded and was able to install Flash correctly. Make sure you do a clean just to be safe installation.

  • The user profile is not the connection. User profile cannot be loaded.

    original title: account login

    When I type my password, I get the message: the user profile has no connection. User profile cannot be loaded. I have two accounts and other newspapers with no problem. Can you help me? I use Windows Vista Home Premium.

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I can see the broadcast live on the site, but other people cannot see the stream!

    I downloaded on my Web site HTML incorporate code (by Flash Media Server full) by Flash Media Playback ! I checked the Server and found that it works! I can see the live broadcast on the site, but no other people can see the stream! What happens? I see the data flow but other people are not see. Use Flash Media Server (full) and Flash Media Live Encoder 3.2! I inserted the html cod in the body of my site in the index! I have prewieved (COD. html), I checked and its works, I can see on my website ! Thank you!

    The crossdomain.xml file must be placed in the folder is rootinstall/webroot and not the apache2 folder. 2/conf. There is no change required in the httpd.conf file. Please read "Setting crossdomain.xml file HTTP streaming in Flash Media Server" section in the link provided above carefully.

    Thank you

    Apurva

  • When you connect to the WebMail Firefox Earthlink remembers all the connections, but I have a misspelled, than I want to delete; How can I do this?

    I am running Win7 Pro 32-bit. On my XP machine, a disk cleanup deletes all the collected credentials, but I can't get rid of one incorrect in this computer. He has not come if I go to Earthlink WebMail use IE, if the ID is stored somewhere in Firefox. Content of about: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; RV:1.9.2.12) Gecko/20101026 Firefox/3.6.12

    You are welcome. Please mark this as resolved issue.

  • Please someone tell me why I get this error, as my D: recovery drive has 3 GB of space on 28, I don't know how to delete it and it may be the cause but I'm not sure, that's why I'm here :(

    The error is the reference 0x00c91187
    memory 0x47be01e0. The memory could not be read

    Here is a link to the screenshot of my http://tinypic.com/view.php?pic=1e56v6&s=8#.VCyjYPldVOZ error

    I don't know why I get this error and its very annoying, my hard drive has 3 GB of space for 28 gigatbytes, why is there so much space taken up there and how I delete it without hurting important files

    It dose it when you try to run an apillication game. or other

    Sorry for not being detailed

    I hear by clear weather, how to free up space on my D: recovery drive?

    and I am referring to the game app is soldier fonts 2, it gives me error when I start the game

    and no, I only get this error with the soldier make game 2 application only

    and here's a better link RII

    Sorry for the inconvenience

    http://Tinypic.com/view.php?pic=1e56v6&s=8#.VC3GRfldVOZ

    OMG IT WORKS SO BAD, I HAD TO UPGRADE TO WINDOWS 8.1 WAHOOOOO

  • OfficeJet Pro 8610: 8610 plugged Ethernet think he lost the connection but eventually prints

    I have a 8610 connected to 2 PCs; USB, an ethernet.  The ethernet connected printer is configured on the PC as a network printer.   When we print the Ethernet connected PC sometimes it prints immediately and we sometimes these messages:

    When we get the messages the printer has his light and isn't in offline mode I can find.    If we simply not do whatever it is, the printer communicates eventually and the job will print.

    Anyone know why this is happening and how to fix it?

    Note: we had this PC configured to print wireless but had long delays in printing that indeed.   It's faster with ethernet connection is operating properly.

    Hello tilzie,

    Welcome to the HP Forums.

    The issue you described concerning the communication of the question, it looks like that is having a problem of recovery since printers sleep/standby mode.

    First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    I also suggest that we run the HP print and Scan Doctor.  I would like to know if the doctor fails, or if you see the error codes.

    See you soon,.

  • Iceweasel maintains the connection but gets nothing

    using the jessie debian distribution, I have today improved iceweasel 31.8.0 - 1 ~ deb8u1 to 38.4.0 - 1 ~ deb8u1 on an amd64 platform.
    The old version was to have no problem alone, but the new version repeat myself some 'connection to AccountName"receive nothing.

    I have no idea where I should start. I do not change my settings account in any way. Iceweasel new poss褥 which must be defined that I know not?

    Also I have a little trouble finding the debian package to reinstall the older version. Where can I find it?

    Thanks in advance, ruud

    Found. My company made a network change so that it was not to use the proxy. The proxy is always used in the configuration. The old version was apparently have no problem with it. This new version has done of course.

    No configuration "no proxy" did the trick.

  • P1 of Lenovo Vibe (3G does not work, to the connection but very very slow)

    No idea how her figure-out and resolve the cause first Lenovo Vibe P1 3G connection failure / slow connection problem?

    I have 3G plan but not able to use it. WiFi works well, but 3G does not work after update to Marshalmallow.

    I found solutions to the question:
    -If you have problems with network i.e., 3 G/Wi-fi you just need to reset the network settings to (settings > Backup & reset > reset network settings)
    -If you have any problem with other things you have to factory reset your phone after the upgrade Marshalmallow.

  • Acer Predator G6-710 BSOD works well after the connection, but...

    Hi I'm new to the forum.  My question is that if someone else got some error checking to restart error and if so, how to solve it.  I'll share the info I get from Whocrashed from the dmp files.  I am running windows 10.

    ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump

    Dumps are enabled on your computer.

    Tuesday, October 4, 2016 05:25:53 GMT crashed your computer
    crash dump file: C:\WINDOWS\Minidump\100416-3984-01.dmp
    This was probably caused by the following module: iccwdt.sys (ICCWDT + 0 x 7838)
    Bugcheck code: 0xD1 (0xFFFFF80746167838, 0xFFFFF80746167838, 0x2, 0 x 8)
    Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
    file path: C:\WINDOWS\system32\drivers\iccwdt.sys
    product: driver Intel® Watchdog Timer (Intel (r) WDT)
    company: Intel Corporation
    Description: driver Intel® Watchdog Timer (Intel (r) WDT)
    Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: iccwdt.sys (driver Intel® Watchdog Timer (Intel (r) WDT), Intel Corporation).
    Google search: Intel Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL

    I can't connect to my desktop and everything works normally.  But when I leave my computer alone, if I run a game or not, and no one touches, it displays a blue screen with the error above.  Does anyone have a solution?

    OK, but a week later the same problem occurred.  This time I retried the search google for anything whatsoever.  I managed to find the message with a driver who has a problem of "overclocking".  I went to the Acer website and went to the drivers.  I thought I had them all, but I missed the chipset driver.  Now, I got the BSOD when I updated and since then, I have not had a crash.  I hope that this help anyone having the same problem.  And thank you to everyone who has helped too.

Maybe you are looking for