I get a blue error screen, and I suspect that it is a driver problem.

Similar Questions

• Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green

  Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green.

  The only way that I could finally restart, was safe and then I restored to before I installed SP2.

  WinXP SP2 must have been installed more than four years ago.

  If you haven't installed SP2, you could not possibly have a functional application of the antivirus installed so see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the Blue error screen "DRIVER_IRQL_NOT_LESS_OR_EQUAL" frequently on windows XP Pro and Win 7

  Hello

  Our Office recently we are facing issue with as "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error blue screen frequently in most of the laptop,

  all the laptop with Win XP Pro-SP3 and Win 7 Professional.

  * It causes while he was working on several browsers or applications.

  * A few times everything by removing the Ac laptop adaptops, getting suddenly Bluscreen problem with the same error as "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  My troubleshooting:

  According to my Google search, I did the troubleshooting below:

  * In format and re-install with fresh people with Win XP and Win 7 Pro system.

  * Updated with the latest patches from Microsoft.

  * Updated all hardware drivers of Lenovo

  * We use Symantec Antivirus 11.0 client in all laptops, in this way, we had to also call with symantec and log the issue with them. but according to the confirmation of Symantec, it is not caused due to Version 11.0 Symantec

  * According to lenovo support, we have changed the physical memory RAM.

  After all troubleshooting done all too, we always get problem.

  Error message:

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: halmacpi.dll

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  Halmacpi.dll - address 0x834257a0 base at 83422000 DateStamp 0x4a5bbf07 0 x

  *****************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: SYMTDI. SYS

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  SYMTDI. SYS - address 0x8cf00023 base at 0x8ceef000 DateStamp 0x4ed7ca75
  ***********************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: igxpmp32.sys

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X100000D1 (0 X 00000002, 0 X 00000008, 0XB846D160, 0XB846D160)

  igxpmp32.sys - address 0xb846d160 base at 0xb8265000 DateStamp 0x4e85e92a

  *************************************************************************************************************

  Please give us the solution to get out of this edition

  Error logs:

  https://SkyDrive.live.com/redir?RESID=B7400F7AC914BDC7! 104 & authkey =! AHh7MiYoqEYxme0

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Get the Blue error screen: "error of Page in the nonpaged area".

  Original title: Page fault

  I get a blue screen Page fault in non paged area... just above what it lists win32k.

  I get this error when you create a new contact in Outlook or by using Firefox.  I can use IE 8 without any problem.  Do not know what is causing this problem.

  LJ

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  http://msdn.Microsoft.com/en-us/library/ff559023%28VS.85%29.aspx

  Please copy the files of the dmp to the C:\Windows\Minidump folder first on your desktop, zip dmp all in 1 zip file and download the zipfile to your Skydrive [1] and post a link here, so that I can watch the discharges with the debugger and to see the cause of the accident.

  André

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Get the Blue error screen when entering Sleep Mode

  Original title: BSOD

  I get BSOD a few times of the day when my computer enters "sleep".  I guess it is driver related but is unable to identify the culprit. I use BlueScreenView and on some files .dmp lists as the "caused by driver" ntkrnlpa.exe on others, it lists tcpip.sys.  Can I download files .dmp full if someone can give me an idea on how to solve this problem?  Thanks in advance.  Vista by the way.

  Hello

  BSOD CAUSE tcpip.sys which is a component of Windows that means something else, he drove in error.
  The question is usually the network drivers used and/or antivirus/antispyware/security programs.

  -----------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

• Get the Blue error screen: "Stop: 0x000000F4 (0 x 00000003, 0x885F7500, 0x885F764C, 0x83676AB0).

  Original title:-Microsoft Vista will not start. Blue screen with detected problem

  My laptop does not start at the top. I have a blue screen and it says Stop: 0x000000F4 (0 x 00000003, 0x885F7500, 0x885F764C, 0x83676AB0.) I tried to solve the problem with my disk of vista kaspersky rescue cd and windows. I did chkdsk and sfc/scannow. It does not start without failure or last configuration mode. I tried many methods in the forums before you reinstall the operating system. Please I need HELP!

  Thanks for the reply, but I had fixed 6.00 PM U.S. central time. I tried repairing the system 3 times using the original disk but still does not start. I tried to use the command prompt and ran the check disk and it worked. I had to type C: to indicate the correct drive and ran chkdsk and it repair the corrupted files. I think it was an update of a driver that caused the problems. It starts after running chkdsk. I learn a lot and thanks for the support.

• My computer keeps restarting and get a blue error screen

  I am running Vista Ultimate on my computer.  I recently had to reinstall the operating system and to update everything.  Since last week, I had problems with my computer suddenly stop working and going to a blue screen with error 0x000000C5.  I have not a clue what that means.  Any thoughts on what could be the cause?  More information is thus less to:

  problem signature

  Files helping to describe the problem (some files may be is no longer available)

  Additional information about the problem

  BCCode: c5

  BCP1: 00000000

  BCP2: 00000002

  BCP3: 00000001

  BCP4: 81B367D5

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 256_1

  Information about the server: 2c2c27f0-7a29-4b5d-8946-b27b35f5e4fd

  Mini010210 - 02.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  Caution:

  If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  Hi RB1972,

  Thank you for visiting the Microsoft Windows Vista Community.  Try to use the Safe Mode and clean boot to resolve your problem.  As referenced Kia, there may be a problem with a driver.

  Please let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A blue error screen and all of a sudden stop on my M70 Sat

  I have a portable M70 I buy only 3 weeks ago. I start to deal with the following issues
  -l' display system piece blue with an error message that I don't understand () just when I move a bit my laptop, or even when simply changing the angle of the screen! (sometimes with a noise from the right highspeaker stange)

  -Sometimes the screen closed, but the system works normally (I can hear the noise and the LED is brightning)

  I am grateful for your help and your interest

  Hello

  Usually if the blue screen error message, so it could be a serious software problem or malfunction of the equipment.
  There is generally no solution for this problem. In my opinion you should check, if the software is responsible for this dysfunction.
  Try to install the new OS or retrieve the unit with the supplied restore CD.
  Maybe this will solve the problems.
  If this isn't the case, then there must be something wrong with the hardware. You should contact the service of Toshiba. He can run some diagnostic tests and you will get a detailed response that it s wrong.

• Dell Inspiron 5100 Blue error screen and Diagnostic test fail. Please notify.

  I don't know which article I have to go but I will try section copula.

  I was downloading the software wireless and I got the blue screen message to run the diagnostin test. For a few days I couldn't do it because everytime I turn the power on my laptop turns off after 10/12 seconds.

  Yesterday someone Advisor, I just opened the rear plastic cd/dvd and memory module cover and I was able to turn on the laptop. If I close the lid in plastic, then I wasn't able to turn on the computer laptop co I kept the lid of the box open so that I can at least put in operation and run the test.

  I got this blue screen message

  " Disable or uninstall an anti-virus disk defragmentation or backup utilities. Check the disk hard configration and check that all of the updated drivers. Run chkdsk to check for check disk hard curroption.

  Technical information.

  Stop.0X00000024 (0XF8965408, 0XF8965104, 0X001902FE, 0XF8576A27).

  VOISANP. SYS-address F8576A27 Base at F8576000, DATESTAMP 41107b6e.

  Can someone explain in English how to do all these things mentioned above in bold.

  I run the diagnosis after it and test all test except one listed below.

  EARLY DST TEST RUNS

  IN CASE OF FAILURE

  ERROR CODE: 1000-0146

  I also need help with this test. What I have to do.

  I reinstalled Windows XP again and drivers except 1 (PCI Modem, I have a problem)

  As you can tell I'm not good with laptops so I hope just that if it can be fixed easily or maybe it's time to get a new one instead of spending money on a Jules Destrooper.

  But I like the challenge of it. If anyone can help me with this.

  Thank you

  
  

• I get a blue error screen please help

  Hello I am late to the federal Government without a lot of noise for a week before the Internet while browsing blue Bianda got down screen Dimming error yazacam soon his first seeing this error I tried to Vaari user the result of research on the internet and I did computer recovery however, frustration and mistakes so error continues in an elegant way the following figure = drıver_ırql_not_lessor_equal (rtwlane.sys) I have no knowledge on how to solve the error I am happy if you can help thanks in advance

  Hey, @bykusss.

  Looks like your card wireless Realtech driver is due to a malfunction, but you can try updating your driver... but I think that you may need to replace the wireless network card, it should be a hardware problem... If you have the guarantee that you can claim.

  RealTek - downloads (search)
  http://www.Realtek.com/downloads/

  Kind regards.

• Windows 8 cannot start every morning, get the Blue error screen

  I installed windows 8 pro on my Lenovo ideapad laptop. Every morning I start my system, it won't start and I get a screen of recovery blue crash and then it restarts and then starts normally. What is happening every day. Please help me.

  I solved this problem. This was due to the lack of drivers for the hardware a bit on my system. I checked in Device Manager and install.

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the Blue error screen nvlddmkm x 116

  Run Dell 8400 with 2 GB of RAM with the video driver Nvidia 306.97.  a lot of cool space, card Nvidia has two power cables attached and I have a 400 MW power protruding 100MW original equip.

  Applied mods MSFT updated 14/11/12 AM, 6 hours later Nvidia messaged "Nvidia is low-powered and will reduce the display quality.

  This notice came on the next and then broke down.  Applied the new Nvidia release (306.97) same question.  Regularized update to 5/15 of Nvidia, same question, BSOD once per day.  Performed the test four times, MSFT and Dell no memory problem.  Then ran test video, BSOD, pointing always toward "nvlddmkm (14) in the event log."  The event log tell the sender of the error could not find pgm to treat it.

  I looked on Nvidia (many problems with nvlddmkm) and BSOD x 116.  Now, I have not had this problem before update 14/11/12 of MSFT.  Still don't like not framework code updates.  They have been a source of many problems for my computer systemw.

  Pointers of solutions would be apprecianted.

  J.

  As you understood nvlddmkm.sys crashes. Your directX files can also be crashing. Update