Blue ray recorder hard drive problem

Similar Questions

• How to burn a Blu - ray export Blu - ray to hard drive?

  I have about a two-hour project that is 21 GB as a blu - ray export drive to the hard drive (I chose not to export to my burner blu - ray, thinking that it would be faster and the desire to burn it later if I wanted to). Now, I have the 21 GB exported to a file .img file, but I have no idea how burn it. Compressor does not open the file and no "burn" which does no DVDs anyway. Just to clarify, then export the project on Blu - ray, I chose HDD as my output over my blu - ray burner, who was also an option.  Any help would save me probably 6 hours or re-export and would be greatly appreciated! Thanks, Paul

  If you are using El Capitan: control - click on the image file in the Finder, choose burn.

  For previous versions of OS, open with disk utility and click on the burn button.

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• The Blu - ray disc reader driver update

  I get Tempro-messages that I should update my driver disc Blue-ray (bluraydp-20130117155646) drive.

  I tried to install it several times but each time I get this error message:

  "Patch Project - Install Shield Wizard:

  Build version of the source is not build target.

  What can I do?

  Please continue the discussion on http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=286803
  There is no reason to start two identical threads.

• Qosmio F60 turning is not on - HARD drive problem

  My F60 running stock windows 7 and when I turn it on I get a black screen with the following text:

  + Check the file system on C: +.
  + the type of file system is NTFS.
  + Volume name is s3a5802d002 +.
  + One of your disks needs to be checked for conisitency. +
  + You can cancel the disk check, but it is strongly recommended that you continue.
  + To skip verification of the disc, press any key within 10 seconds.

  If I leave it just like that.
  I try to ignore it, and it does not work so I turn it off and go again on the third time, to turn on while I press ESC. What should I do about it?

  Re: do everything or send it as it is only 6 months old, it is Bernard did this for 5 months

  Hello

  It sounds a bit like a HARD drive problem.
  I recommend checking out the HARD drive using a free tool called Drive Fitness Test
  This free tool allows you to get more details on the State of the HARD drive and maybe some error would be detected which would mean that HARD drive failures and disk HARD must be replaced.

• A55 (8982 - 77G)-Windows 7 SATA Hard Drive problem

  Hi, hoping someone can help here. I just bought the above system, it came without a hard drive, as it was purchased at a business. I installed a Seagate 200 GB SATA hard drive and I am trying to install Windows 7 Ultimate... the HD is recognized by the BIOS and the POST, but the installer of windows 7 do not see, I searched relevant drivers for the motherboard... but can't find it nowhere I tried to set the Auto and Serial ATA SATA BIOS setting only with no success... Any help would be appreciated.

  Concerning

  Hi and thanks for the answer, had sorted out, seems it was a b the hard drive problem. Once I have two-way for another installation of windows 7 200 GB SATA drive picked up immediately.

  Concerning

• I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Hello

  I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Refer

  Using creative cloud | Download, install, update or uninstall applications

• Suddenly my laptop refuses to open the log in page and everything leads to blue screen of death, something to do with the hard drive problems.

  I do not quite understand computers.

  Randomly, I received a notice pop up saying that I need to backup my files because windows detected a hard disk problem.

  I did scans and system restore but nothing works.

  I used to be able to access safe mode, but now I do not get this option.

  I kept getting the blue screen of death to do something.

  But now I have nothing other than the loading page "TOSHIBA Leading Innovation".

  I have a Toshiba laptop, his more than two years and use Windows Vista.

  No miracle solution?

  Or should I bring to wait for him?

  If so where I will get the best service at afforable prices?

  Hi BethanyLa Chappelle,

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  What to do if Windows does not start correctly

  What are the system recovery options in Windows Vista?

• Portege M700 - protection of HARD drive problem

  Hello world

  I searched the net for a full day now try to find answers to this.
  Note, I am an accountant and not a computer geek.

  I have a laptop Portege M700. I am updating from Vista to Win7.

  Here's the problem:
  -Initially tried to uninstall Toshiba HDD Protection via Control Panel and got the message error "internal error 2753 setupftc.exe.
  -Then searched the Internet and realized that I had to stop the service first. Note that I does NOT initially stop the service in the Service Manager.
  -Now went in the Service Manager to seek Protection of HARD drive and it is not at all.
  -Returned east to configuration-Toshiba HDD Protection Panel is listed as a program. It will not always uninstall it... the activiates Assistant uninstaller, and after a few seconds, he simply says the same error message is ' «internal error 2753 setupftc.exe»»

  -a search on the internet about this error does no useful result. They underline that the registry cleaner programs. I have NOT installed the registry cleaners.

  - then I went to the registry and created a backup of the registry.
  Then tried all the items containing 'HDD Protection' and started deleting them hoping that it would work.
  Then I tried to uninstall.
  The computer popped up a message stating that a restart is required.
  Tried to restart and got a blue screen.
  Then restared in safemode, reloaded the old registry file and VOILA the computer is back to normal again.

  BUT...
  I can not even uninstall HDD Protection. Get the same bloody error.

  -then downloaded the site Web of TOSHIBA HDD Protection file.
  Try to install this file... I get the same error, i.e. "internal error 2753 setuptfc.exe.

  Ok.. now, I'm ready to give up.

  Really, I didn't wipe my comptuer clean to do a fresh install, because it's such a big hassle. And I'm an accountant, not a computer expert so I don't know what to do for a new installation.
  For the time I've wasted on this already, I probably just to find instructions on the net and then made a complete new installation.

  All the advice to fix it, pleeeeeeeeeeeease! : ??

  Thank you.

  So clean Toshiba HDD protection tool didn't help installation then some registry entries must be screwed to the top.
  Believe me, best you can do is to install the OS to aid installation of HARD - disc of recovery http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm recovery mode or use if you have a.
  After a clean install of Vista, everything will work correctly, and then you can start with the Win7 upgrade procedure.

• Since the update of Vista on my external hard drive problems

  I have a problem with my external hard drive. A week ago I reinstalled Windows Vista Home Premium on my PC. Everything worked very well, my external hard drive, too. But after installing all the new updates and SP2 my external hard drive has problems. If I copy something from her, or just listen to the music is recorded on it, so overall if I work with her, after 1 to 3 minutes it stops working. I have to sign in to get access to it again. But before installing SP2 updates after SP2 everything worked out very well. So I think that there is a problem with SP2 or the following updates. My Pc is a Dell Dimension 9200 and the external hard drive is a Verbatim 1 TB external hard drive and USB 2.0

  I tried to bbot with Ubuntu and delete the Autorun.inf. Now everything works fine again.
  Thank you

• No audio/s devices after xp reinstalled because of hard drive problem

  Hello, my brothers Emachines W3502 encountered a problem and wouldn't start. It would also not reinstall the OS from the unique DVD ROM drive there. We thought the drive was defective (this computer sat near a tanning bed). His friend has replaced the hard drive, I don't know with what. He has also reinstalled windows xp home edition. Subsequently, there was no noise. No volume devices, no device for sound playback, no sound recording device, no MIDI music playback device. Also, the Device Manager shows YELLOW? (question mark) next to the other category of devices, and in the other devices category the simple PCI, PCI communications device controller, video controller (VGA compatible), SM bus controller all have YELLOW? (question mark). Thanks in advance for any help. Thanks, Jim

  I would like to add the following:
  in the "other devices" category, all devices show that no driver has been installed
  When I try to reinstall the drivers for the "other devices", without the cd, allowing the computer to search the web for the drivers, it does not find the necessary software for any of them. Thanks, Jim

  2nd edition:
  I have also noticed that in the information system / components / his device, this area is completely empty without any information whatsoever. I also noticed that this seems to be a hot potato for a reason, so, I would like say that if the only advice that I can be given is to try the operating system reinstall once again, it would be quite enough. Thank you and you have been more than useful in the past for a person with the knowledge it please go ahead and say "try again" or something else, so I'm convinced it's the best solution to this problem and I can mark this as answered.
  Me not wnt be troble juice try a lern

  Hmmm I wonder, I wonder
  Sorry to have bothered y ' all just sick as Mark said, because I don't like leaving in suspended animation like this causing unnecessary looks. Anyway thanks, really. See ya later, Jim Me wnt be no troble juice try a lern

• Start with external hard drive problem

  I recently bought a Western Digital 1 TB external hard drive. When it is connected through the USB port my Pavilion a815n Windows XP hangs on the blue HP screen at startup. Western Digital technical support Advisor info sent to me I need to change a setting in BIOS but I can't find the trunk of USB device option setting in the BIOS of HP.  Can you tell me how to access this setting, or what else to do to solve the problem?  Thank you!  Jake

  Problem:
  After connecting a device USB to the PC, the computer does not start in Windows.

  Cause:
  The motherboard has a boot from the USB device, or a similar option, which is enabled in the system BIOS.

  Solution:
  In the system BIOS, disable the option to boot from the USB device and the USB Legacy Support option. This will allow the PC complete the process on the internal hard disk and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB key. Once the computer is fully booted Windows, plug the USB and wait for the operating system to detect the drive.

  Update the BIOS seems to have solve the problem. It was normally restarted with the attached hard drive.  Thank you!!  Jake

• Copying files between hard drives problem

  Hello

  I have problems copying files between hard drives on my computer. I was having this problem on Windows 7 and Windows Vista, but never met him on XP.  It seems that there are several similar topics, but I think I've noticed a few oddities in my own experience...

  I have several drives, between 500 GB ~ 1 TB.  Problems arise when I try to copy a folder with a large number of files (pictures, records about 4 GB in size, typically).  Initially, the transfer rate would be HD burst speed, somewhere between 90 MB to 150 MB.  Speed would be reduced to about 30 MB, or even lower.  The transfer ends by becomes so slow that the operation would take hours to complete.  If I try to cancel, it would take minutes to do.  The computer run slowly for a long period of time, with an offset of intermittent until I have to reboot the system.  This occurs regardless the source and destination drives.

  On some Samsung drives, this problem is actually lead to the corruption of data on the source and destination drives and i/o error messages.  CHKDSK runs at startup, try to solve the problem, but the data would be lost or unreadable disc.  I have since thrown the Samsung WD drives, do not have IO error, but the file copy problem persists.  I also disabled chkdsk at startup for all readers.

  My drivers and Bios are up-to-date.  Computer is free of viruses and malware.  I have no more trouble with Windows 7.  Curiously, if I compress my folders/files in one RAR file, I have no problems copying (transfer rate remains stable at 30 ~ 50MB).  This leads me to believe that this is not a hardware problem, but a problem with the Explorer of solutions, and that respect more particularly with the number of files transferred rather than size.  (But unpacking these files also lead to poor performance sometimes...)

  Is this a known issue that will be corrected?  I really like Win7, but because I work with large number of files and many backups all the time, stability during the file copying is a must.  I have perhaps to go back to XP, or use another OS entirely...

  I had the same problem;

  My system-

  Windows 7 Pro 64
  Core i7 940
  7200 RPM dual 500 GB SATA
  Gigabit ethernet

  Gigabit ethernet switch
  Gigabit router

  Buffalo NAS 1 TB, RAID 0, Gigabit Ethernet

  -----

  I was getting speeds of transfer of a maximum of 500 / 600 KB/s between the hard drive and network storage drive. I went through a number of * fixed * on the web without success, however, I disabled "TCP AutoTuning" and "RSS" rebooted and voila, I now get speeds of transfer of 9-10 MB / s and from the network drive.

  The fix
  It should be noted that, in addition to this, I have updated to the latest updates for Windows and off the DRC in the Windows Options under programs/features.

  How to disable TCP AutoTuning and receive scalability side

  1. Open a prompt with administrator rights.
  2. Type the following commands, and press enter (the second command on RSS is optional):

     netsh interface tcp set global autotuninglevel = disabled
     netsh interface tcp set global rss = off

  3. Restart the computer.

  
  ----------------------------------

  website design agency wirral

• "Hard drive" problems repair installation XP

  I have used "some critical XP boot file not found" error message on a backup computer (an early 1.1 MacBook which has 1 GB RAM) I have not used for a year or two and tried to repair the installation.  In the measure where that actually, I start with the CD, download the .flp SCSI file, by pressing FnF6 at the right time (which is not easy!) and exercise. There is one more step curious where install asks if you want to load a SCSI driver and when I said YES, he told me that he was loading the VMWare SCSI driver and operated.

  Unfortunately, it was where the problems began, because when it allows you to press R to repair the installation, install can still not find a hard drive.

  
  

  Anyone know what is happening please?

  
  

  Strangely, when I will to know and seek a. A VMDK file, spotlight can't find? I don't remember when I created initially XP if I did in bootcamp or directly through Fusion, but surely there should be a virtual machine somewhere? My installation has certainly appears as a guest in Fusion when I start it?  And when I go in the APPLICATION SUPPORT folder in the folder of the user on the hard drive, there is no record of VMWare Fusion.

  
  

  A bit worrying, when I first tried to fix this, I accidentally created a new virtual machine and installed XP in that, without realizing that I wasn't not repair installation on site.  All right, but just as he was about to do the installation, after copying all it's files from the CD etc etc and install from those files, it suddenly gives a mysterious cyclic redundancy error, claiming that there is a problem with the CD he uses is more.

  I would like to begin with the fact that the command bootcfg /rebuild but I would probably want to first look at the contents of the boot.ini file.

  BTW is that you have all the USER data on this Virtual Machine, then you should try to recover first in VMDKMounter.

  VMware Fusion (menu bar) > help > VMware Fusion help > using the Interface of VMware Fusion > work with Virtual Machine packages

  VMware Fusion (menu bar) > help > VMware Fusion help > managing Virtual Machines > VMDKMounter to help mount a virtual drive as a Mac Volume

• iMac hard drive problem

  My older iMac 8.1 (Intel Core 2), running OS x 10.9 ran slow, then a few application icons disappears from the display, after a restart, the application has stopped working completely. I tried to reinstall OSX, when this does not work, I did a full erase and reinstall it again, still none of my apps does not work. It manifests itself, and when I click it, it does nothing. I even went back to my original OSX 10.6 Snow Leppard and reinstalled drive and my desktop icons appeared for a few minutes and then everthing disappeared. Also, this has happened during execution of 10.9 as well. Now the only thing that the computer be used to mail is electronic and Safari. I can't run programs and do not have access to HD. If I tried to re - install 10.9, it tells me that it is impossible at this time. I think that my HD is dead? You wanted to check before I replaced it. It starts well, can run internet but not impossible to install, download or run programs. Disk First aid indicates that the computer is fine. Can not really afford to buy a new Mac now, so hoping that this can be a cheaper alternative.

  How much free space on the hard drive?

  There is no 100% way to check the health of a hard disk. Disk utility check alone is doing a part-time job to check the directory structure but not physical integrity of the reader. If you select the top level of a drive in disk utility and then file > retrieves the information of to half way down you can see the report of the SMART State which can indicate if a drive is having problems.  With one of my discs that I checked that feature, but it was not picking up on several defective sectors systematically producing errors.

  The only real way to test a faulty hardware on a computer is to isolate the part (normally in the replacement, or do without it) and see if the issues go away.

  I always keep a clone bootable backup of my drive on a separate drive so I can still boot from the second disk to see if it's an internal drive error.  Having this type of backup is just a part of the ownership of a computer.

  I suppose there is also the possibility, it's another problem as the RAM.  A bad drive would be more consistent as to what elements show problems such as you see.

  You can check on sites like ifixit or OWC (macsales.com) for instructional videos on how to replace the disks.