blue screen caused by driver ntoskrnl.exe

Similar Questions

• Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:

  34 accidents

  one was caused by Wdf01000.sys

  three was a result of tcpip.sys

  and all the rest of ntoskrnl.exe

  I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)

  I don't know too much about software,

  Any help is appreciated.

  Hi bloo532,

  1. what application did you use to read dump files?

  2. did you of recent changes on the computer?

  It resembles that of the driver on the computer is causing the blue screen.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also make sure that all drivers are up to date on the computer.

  See the link below and try them the steps mentioned, check if it helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  If the previous step fails, then you will need to provide the minidump files.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  [Moved from Virus & Malware]

  In case you see something similar...

  

  (photo source: https://malwaretips.com/blogs/remove-debug-malware-error-895-system-32-exe-failure-popup/ )

  ... you can normally just use the Task Manager to exit your browser (' end task'), and the pop-up should be gone. Please visit: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/potential-malware-blue-screen-with-dialog-box-on/3569bb1b-c05e-4247-98dc-6bf22da581e0

• Blue screen of death-IRQ_... driver ntoskrnl.exe plus 2 other cause problem

  Blue screens reappear.

  I have scanned for viruses using Mcafee, Malwarebytes, superantispyware,

  I uninstalled the programs deleted files... do not know what is gong. Here's... more information please help!

  Computer information:

  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  System manufacturer Gateway
  System model D915GAG_
  System Type X 86-based PC
  Processor x 86 family 15 model 3 Stepping 4 GenuineIntel ~ 3200 Mhz
  BIOS Version/Date Intel Corp., EV91510A.15A.0067.2004.0722.1717, 22/07/2004
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Total physical memory 512,00 MB
  Available physical memory 73,34 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.22 GB
  Paging file C:\pagefile.sys

  I used the program BlueScreenView for minidump files:

  ==================================================
  Dump file: Mini081810 - 01.dmp
  Crash time: 08/18/2010-15:58:56
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x1000000a
  Parameter 1: 0x00000000
  Parameter 2: 0x00000002
  Parameter 3: 0x00000001
  Parameter 4: 0x80701a79
  Caused by the driver: hal.dll
  Caused by the address: hal.dll + 2 has 79
  Description of the file: Hardware Abstraction Layer DLL
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2111)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini081810-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 2600
  ==================================================

  ==================================================
  Dump file: Mini081710 - 01.dmp
  Crash time: 08/17/2010 11:10:06
  Bug Check String: IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x1000000a
  Parameter 1: 0 x 00000004
  Parameter 2: 0x00000002
  Parameter 3: 0x00000000
  Parameter 4: 0x804e7f0d
  Caused by the driver: hal.dll
  Caused by the address: hal.dll + 2428
  Description of the file: Hardware Abstraction Layer DLL
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2111)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini081710-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 2600
  ==================================================

  ==================================================
  Dump file: Mini081610 - 01.dmp
  Crash time: 08/16/2010 12:54:11
  Bug Check String: DRIVER_CORRUPTED_EXPOOL
  Bug check code: 0x100000c5
  Parameter 1: 0x0a030001
  Parameter 2: 0x00000002
  Parameter 3: 0x00000000
  Parameter 4: 0x8055196d
  Caused by the driver: USBSTOR. SYS
  Caused by the address: USBSTOR. SYS + 1440
  File description: USB mass storage class driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini081610-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 2600
  ==================================================

  Hi Nass1:

  Can you be specific with the name of the tool mentioned in your statement below? Thank you

  "It will be a good idea to test the RAM by using the windows crash Analyzer tool you can download from Microsoft."

• Laptop Dell - blue screen of death - CRITICAL_OBJECT_TERMINATION caused by driver: ntkrnlpa.exe

  Hello

  I searched for a solution to a major problem, as we have seen with some Dell systems I work with.

  three models who know that exact blue screen: Dell E6430, E7240, and E7440.

  Every accident is due to random, indicating the following:

  Bug Check String: CRITICAL_OBJECT_TERMINATION

  Bug check code: 0x000000f4

  P1: 0 X 00000003

  (the others are always different)

  Caused by the driver: ntkrnlpa.exe

  Address: ntkrnlpa.exe + dedd8

  32 bit OS/processor.

  So far, we tried the following:

  Update the BIOS of the systems to the latest versions.

  Update the version of the driver from the hard drive from the site of the manufacturer (not one Samsungs)

  Replace most of the internal parts (motherboard, RAM, CPU) with known work of Dell parts.

  Recreate the image on the computer entirely. (re - install windows, but still receive the error re-)

  In the end, we end up making a complete replacement of the HD.

  We carried out Diagnostics using a few tools (SMART data reading using SpeedFan) and it is not to report all errors. We used the Dells built in the diagnosis on the RAM, hard drive and nothing seems made of any hardware failure during testing of large 4 hours.

  I was wondering if someone had met these blue screens on other systems, and what other tools and resources, we could use to try and fix these without doing a complete system replacement.

  The most recent crash in this issue is 29 October so it may not be the same as the current problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• [SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

  [Problems]

  Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time

  Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast

  Solves delays random system - system shuts down randomly for no apparent reason
  Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2
  Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.
  [Source of problem]
  The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft.  6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.
  Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.
  [Clean Install FIX]
  When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.
  Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.
  [Windows OS already loaded FIX]
  -Device Manager-
  Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).
  Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.
  Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.
  I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D
  After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
  • Event ID: 1001 Source: error checking
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.

    The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.

  OS: Microsoft Windows 7 Ultimate 64 bit
  Antivirus: Microsoft Windows Security Essentials
  Motherboard: Gigabyte GA-890FXA-UD5
  RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

  Video: Diamond ATI Radeon HD5850 1 GB DDR5

  PROCESSOR: AMD X 4 965BE
  HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K
  PS: Antec EarthWatt 750W PSU V2.3
  KB: Logitech G15
  Mouse: Razer Deathadder 3.5 G
  Gamepad: Belkin n52te
  First try to solve this problem:
  Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.
  At ran Windows Update for the current patches. Random BSOD on restart.
  Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.
  Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.
  Run the checker - 90% chance of BSOD
  Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

  Second attempt to solve this problem (low-level format):

  Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.
  Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00
  Clear the result of the boot record - 0x00
  Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00
  
  
  Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)
  Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file
  Change the BIOS settings-
  Integrated Peripherals-
  OnChip SATA Type [Native IDE] change on [AHCI]
  (No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

  Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

  Install the driver USB 3.0 NEC 21:22 - result - GOOD
  Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

  Install the network drivers Realtek Lan_win7 - result - GOOD

  Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

  Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

  Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

  Shutdown - 21:51

  Power - result - GOOD

  Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD

  Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

  Install Google Chrome - result - GOOD

  Install Fusion - 2.0.1.117

  Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.

  Shutdown

  Power - result - GOOD

  Install the G15 - result - GOOD

  Install Windows Ventrilo 3.0.5 x 64-GOOD

  Install the Steam Client

  Install COD4MW2

  Change the settings to save energy for the computer to never sleep.
  22/05/2010
  Install gtalk, gApps
  Up to 08:57 05/22/2010 BSOD Mini dump.
  
  Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

  BSOD more 2s on 2 days.

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ===========================================

  The material is highly suspect!

  Since you reformatted and reloaded Windows this indicates that the problem is either material or a
  very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
  mouse or keyboard, BIOS, chipset and other low level drivers.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------

  Even if you have some of these here tried a fairly complete convenience store just in case.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -----------------------------------------------------

  BCCode: 109 0 x 00000109

  Cause

  There are generally three different causes for this bug check:

  1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.

  2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.

  3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.

  BCCode: 109 0 x 00000109<-- read="">
  * 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

  --------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer gets blue screen every day "wl merger.exe.

  Good day, IM having some problems with my toshiba satellite (15'6 A665-s5181 notebook pc intel core i5 - 480 m), the computer works pretty well, its when I stop working, blue screen appears and the computer stops its happens at least once a day, the computer does no harm at all to restart... when I check the CENTER of the ACTION to see what caused the screen blue its says failed to apply : WL merger.exe a work stoppage.   Located in the file updatus NVIDIA.

  Help

  I suspect that the "Trojans" might partially explain the weird behavior. They can basically upload other stuff to your PC once they have smuggled themselves on it.

  You download SP1 via Windows update? Have you tried to install it manually? See - http://windows.microsoft.com/en-US/windows7/install-windows-7-service-pack-1 and the link "Download and installation of SP1 from the Microsoft Download Center" on this page. Who installs it OK?

  I hope that the NVIDIA driver update will fix the problem that you were re

  ' merger.exe wl'

  The result of the SFC is good news.

  If you do not get an installation disc, its always a good idea to do a repair disc. Just in case where, it can be useful sometimes.

  Update and run Malwarebytes again, to make sure that nothing has reappeared.

  AND make sure your AV package (depending on what you are using) is up-to-date and run a scan with that.

  Back up your data before any significant change just as a precaution to prevent you from losing everything you need, if things go wrong, as an accident during the SP1 update.

  EDIT - 1. to cause such things - " Trojan.BHO, Trojan.agent, banker spyware," is perhaps a good idea to change a web site password you use esp for sites banking etc. It is difficult to say what these might be, but some of these types of attacks are designed to steal information and passwords and other.

  2. make sure that your firewall works. Go to this site, click https://www.grc.com/x/ne.dll?bh0bkyd2 go ahead and run the tests - at least the good test ports. If your FW working ports must display them under (not open or closed) and you should see a nice green SUCCESS.

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• KB9711486 blue screen causing 0x0000007e

  KB9711486 part of the recent automatic updates last Friday (10/16).  XP SP3, INTEL processor.   After the reboot, get a blue screen with the following error message when windows tries to start.
  0x0000007E (0x805c49b8, 0xf7a602b4, 0 x 8000003, 0xf7a5ffb0).  Also impossible to revert to last good configuration.  Get the error "PAGE_FAULT_IN_NONPAGED_AREA).  Requires external to go back to the last good configuration rescue disk.    Given that Microsoft was pressed so many updates (hotfixes about 11 last Friday... and I run autmatic update), it took trial and error to find patch that was causing the problem.  Ignoring this patch at the moment. Lost most of the weekend recovering in activity. Thank you very much.

  Incidentally, now that the PC is working again, getting another error during the operation:
  DSCA.exe - routing of common language of the debugger service Process ID 0x8d4 Thread id (2260) = 0x8d8 (2264).  Anyone idea what all this on and how do I get rid of him?

  I found this and it worked.

  1 boot from your Windows XP or DVD CD and start the recovery console (see this Microsoft Help article at this stage)

  2. type this command: CHDIR $NtUninstallKB971486$ \spuninst

  3. type this command: BATCH spuninst.txt

  4. type this command: exit

• the pc switches work and I get a blue screen when the driver is installed

  INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

  I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

  It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

  If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

• 'Blue screen' causing the computer to stop. 0x9F_3_IMAGE_athr.sys, type 0

  My laptop recently, close and restart when I close. When I open it upwards to use it, I get a problem report that says... "A problem of wireless networking.

  You have received this message because hardware or software on your computer Windows to close unexpectedly and restart caused. It is a serious problem, commonly called a stop error or blue screen.

  Although the precise cause of this problem is not known, it seems to be related to the wireless network.

  To try to resolve this problem, follow these steps. "One step could solve the problem, but if it isn't, then go to the next step.

  I tried to do all the steps, that they suggested and none of them worked. My computer is more than 2 years old. It is a Dell Inspiron 1545.

  When I look at the event viewer, it gives me this information;

  Bucket 0x9F_3_IMAGE_athr.sys of error, type 0

  Event name: BlueScreen

  How can I solve this problem?

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failure blue screen State Power Driver

  I have an out of State driver blue screen open the Minidump file and the problem seems to be with netr7364.sys.  Now what should I do to solve the problem?  I did not any changes recently, so I don't know what could have caused the problem.

  After uninstalling and restarting, the version of netr7364 is 4.00.00.0015.

  I had not recorded the vwifibus.sys version, but now is 6.1.7600.16385 (win7_rtm.090713 - 1255).

  The RaCoInst.dll driver is no longer listed.

  And now, he will recognize that the wireless network settings match!  It does not connect because it says that the password is incorrect, even if I am sure that it is in fact correct.  But that's a separate issue.  I think that would have solved my problem.  After some time with blue screens is no longer, I'll be sure.

  Thanks a lot for your help!

• Blue screen causing KB2272691 or KB9822110 - I does not start on Win7 64 bit ultimate

  After installing these updates in my pc I get blue screen every time whe windows 7 starts. Restore to solve the problem. So what's the problem with these updates?

  Hello
   

  Method 1.

  Install the updates manually and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  Download the updates from the links below:

  Update for Windows 7 (KB982110)

  Update for Windows 7 (KB2272691)

  Method 2.

  Also, you can zip the minidump in the C:\Windows\Minidump folder files and make available (provide the link) through Windows Live SkyDrive.

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Hope to hear soon back on your part!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I get a blue screen caused by XDVAnnn.sys event

  I play a game called fiesta online, two weeks ago, when I tried to log on to the game wouldn't load.

  I rebooted the system, and as soon as the process has started I got a blue screen event and was forced to close.

  When I restarted the computer (presario CQ60) a notification has been shown and I reported to microsoft by using the problems and solutions and told me that there is a solution, the exact message is "Malware alert: problem caused by XDVAnnn.sys could be malicious.

  The solution was to scan a complete service in the center of windows onecare. The analysis concluded that there is no virus or anything else except registry problems that have been set.

  My internet security program is no problem and I can not find this program or anything like that.

  I'm using vista Home premium

  Help please, its driving me crazy...

  keeney1,

  Thanks for posting on the Microsoft answers Forum.  I did research on this error and what I found.  The XDVAnnn.sys file is apparently related to X-Trap that uses Outspark (Fiesta manufacturers).  X - Trap is an anti-cheating tool used by this company of online game.  I saw on the Outspark support page they request a screenshot of any error of X-Trap.  You can contact their support for all possible solutions.

  One thing I saw was a suggestion to disable your anti-virus program while playing the game. * DO this at YOUR OWN RISK * disable your anti-virus program can open your computer up to possible infections on the internet.  As you have seen that he is also suspected of having possibly attached to it as well Trojans.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen causing Internet sharing

  I try to use internet sharing with my Nokia Lumia 920 and my windows pc 8 every time my pc connects to my phone, I get a blue screen which says that the computer encountered a problem and needs to restart with an error driver irql. How can I solve this problem.

  It worked for me:

  1. Open the control panel
  2. Click on Device Manager
  3. Expand network adapters
  4. Double click on the wireless LAN adapter
  5. Click the Advanced tab
  6. The selection mode the 802.11n
  7. Change the value to off