[SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

Similar Questions

• stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

  original title: stop random screen w/blue

  I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1

  nvstor.sys - address 83F42395

  Any help would be appreciated to gratly.

  Hello

  Here is a version of Vista of the troubleshooter that Dena referred:

  =================================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  Check with your manufacturer for newer drivers video card (special forces), known issues and
  other possible problems - check also the video card and game maker forums. It can even be
  a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
  video driver and a swap file error and other causes work together to create the problem.

  ==============================================================

  Even if you have done some of these methods here is the complete troubleshooting tool while
  dealing with his need.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly

  
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen error 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF880012DD031, 0xFFFFF880033245E8, 0xFFFFF88003323E40)

  So for some time that I get the blue screen error when I open Google Chrome, so I went through a few forums and how best to deal with it was to uninstall Chrome and then reinstall and immediately worked. But a few hours later, I then tried to open World of Warcraft and even once, the blue screen appeared, but this time with a different error code.

  Technical information: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF880012DD031, 0xFFFFF880033245E8, 0xFFFFF88003323E40).

  Also I tried to use cmd with the command chkdsk /f to fix disk errors but that did not work and instead, I received a message saying "the type of the file system is NTFS.

  Cannot lock the current drive. »

  So just played IV ' e League of Legends and I have another blue screen but this time it's a LeAPC_INDEX_MISMATCHErreur

  Technical information: 0x00000001 (0 x 0000000000000000, 0x00000000FFFFFFFF, 0x00000000778028AA, 0xFFFFF88009D45C60)

  Any help would be greatly appreciated.

  GW

  You did not remove the ATK and I would also delete AVG and use Microsoft Security essentials

  

• Blue screen error 0x0000007E (oxC0000005, ox8641C615, 0x866A07A4, 0X866A04A0.

  Had problem with vista shutdown and gives me a blue screen after installing a program have had problems in the past so I deleted all the partitions and OS using Toshiba drive and after completion of that task enabled on the computer with the disk installed and computer configured to load the CD first and kept getting the same code.

  Hi wrench9007,

  What happens when you try to boot from the hard drive?

  This problem may occur when a preparation system (Sysprep) image is created on a computer that uses an Intel processor and is then deployed on a computer that does not use an Intel processor.

  Most computers include an image that the manufacturer created by using the Sysprep tool. Sysprep allows the computer manufacturer generate an image that can be used on different computers.

  I suggest you try the following steps:

  Step 1: Disconnect external hardware devices (except the keyboard and mouse) that are connected to the computer. In addition, remove or disconnect any equipment that the manufacturer of the computer does not support. Also, remove any hardware that you recently installed.

  Restart the computer normally (leave the start the computer from the hard drive)

  Now having the same problem?

  Step 2: If the installation is underway after booting from the DVD, try to roll back, follow the steps mentioned in the link below:

  Troubleshooting the Stop error messages may occur when you try to install Windows Vista

  http://support.Microsoft.com/kb/935806
  (See section Stop: 0x0000007E or Stop: 0x0000008E)

  Reference:

  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"

  http://support.Microsoft.com/kb/953356

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Random blue screen errors

  I use windows 8 64-bit on my laptop, and lately I've been doing bluescreen errors frequently.

  It says «DRIVER_IRQL_NOT_LESS_OR_EQUAL (NETIO.» (SYS) 'and when I restart the system, it displays' runtime error Visual C++ to not enough space for thread data ".» It happens sometimes and randomly in an interval of 10 minutes.
  Help, please.

  PA

  These were all linked to netio.sys and frequently when this happens, it is in fact linked to the application of malicious programs installed.  What do you use?

  Please run the driver verifier

  Driver Verifier (for full instructions, see our wiki here)

• Blue Screen errors and random crashes, please help!

  Hello, I built a computer about a month back, and now, whenever I try to play games and talk on Skype/teamspeak all crashes saying that nothing does, and when I try to open another program it crashes instantly and now I get random blue screens. Here's the code for the blue screen: STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFF80002E9CBFI, 0XFFFFF880009A99D8, 0XFFFFF880009A9230) I look at the time and make sure that nothing is overheating, but it sews blue screen randomly, I tried to install windows debugging tool, so I can see the dump file, but whenever I try to install it, it says installation failed, it's my only computer, and I need it for school help Please.    Also, when I got this computer ready to go, I took the hard drive from my old computer and transferred the files and some games.

  System Specs:
  NZXT Guardian 921 RB black, blue LED
  Two Green Logisys sound active Cold Cathodes
  AMD Phenom II 970 x 4 3.5 Ghz
  Zalman CNPS9700 LED blue 110mm 2Ball CPU Cooler
  HIS Radeon HD 5670 Itceq
  OCZ ZS 750w ATX POWER supply
  ASUS M5A97
  8 gb Corsair Vengeance 240 pin 1600 mhz
  1 TB Seagate Barracuda 7200 RPM
  Windows 7 home 64-bit

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Blue Screen Error: In reference to driver Canon A410 Power? have you tried the recommended solutions and still not solved?

  Blue Screen Error: In reference to Canon A410 power? have you tried the recommended solutions, a still unresolved?

  Hello Ms. LeggsAngelhearts,

  Download and install the latest Vista compatible drivers for your camera from the link below:

  PowerShot A410 - drivers

  See also: update drivers: recommended links

  Pick up the pieces after a computer crash

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Blue Screen error PAGE_FAULT_IN_NONPAGED_AREA & IRQL_NOT_LESS_OR_EQUAL after I found a redirect virus

  The other day I noticed that I had a virus that was redirecting my searches on Google to scour.com. I used my anti-virus installed (PC-Cillin) and downloaded Malware Bytes removed the virus. Since then, my computer always gives me the blue screen of death once it starts. Startup of Windows and the programs that are supposed to start start to leave, but after a few minutes I STILL get the blue screen of death, and I'm getting various messages including IRQL_NOT_LESS_OR_EQUAL (no driver is listed), I also gottene PAGE_FAULT_IN_NONPAGED_AREA; It seems to be a different problem each time. What is going on? I still have a virus or something?
  I tried the system restore, does not solve the problem. When I try to change the registry through the command prompt in safe mode to copy the \RegBack\ file beforehand, I get a "sharing violation". How can I fix the registry through safe mode?

  Hello

  To check again if the problem is caused by a Virus/Malware on the system, I suggest to refer to the link below and run the Windows Live OneCare safety scanner and check if the problem is caused by an Infection of Virus/Malware on the system

  To run the scanner Windows Live OneCare refer to the link below

  http://OneCare.live.com/site/en-us/default.htm

  The Blue Screen of Death occurs when Windows encounters a critical problem which it can't get out without stop to stop operations after posting the diagnosis of the problem in the form of the Blue error screen.

  Follow the steps below to solve the problem with the blue screen of death.

  Method 1:

  Try to access your computer in safe mode and follow the steps below. You can start safe mode and then try to repair the registry.

  To start your system in safe mode follow the article below:

  Start your computer in safe mode

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

   

  Method2:

  Step 1:

  Try to perform the clean boot in safe mode and check if the problem persists:

  To perform the clean boot follow the article below:

  Clean boot

  Note:
  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2:

  Also try to perform the material clean boot when you start return to normal mode. To perform the starting material in minimum mode follow the steps below:

  You can try to perform a clean boot material and check if the problem is caused due to all the equipment connected to the computer.

  To perform the material clean boot, follow the steps below:

  (a) disconnect all external devices.

  (b) start the system in safe mode.

  (c) go to Device Manager

  Device that can be disabled to perform a clean boot material are

  ·         Video cards.

  ·         Sound card.

  ·         Network card.

  ·         USB devices and controller

  ·         CD\DVD.

  ·         Modems.

  ·         Ports (series and parallel)

  After doing this, if you are able to Start in Normal Mode, try to activate the device one by one and find out which device is causing the problem. Try to install the latest driver for this device, or contact the vendor of hardware .

   

  Method3:

  You can run the control and verification of the disc if it solves the problem:

  To perform monitoring of disk check the steps outlined in the article below:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  For more information about how to manage the blue screen error please follow the article below:

  How to manage blue screen errors in Windows 7

• Blue Screen Error MODULE_NAME: Ntfs

  I have a few BSOD that appear from time to time and I do not understand the minidump files.

  My minidumps can be found at:

  https://onedrive.live.com/?ID=13511480866954F4! 135 & cid = 13511480866954F4

  Any help would be appreciated. Thank you very much.

  Hello.

  Bugcheck 1E, {ffffffffc0000005, fffff80002d7daf5, 0, ffffffffffffffff}

  Probably caused by: memory_corruption (nt! MmCreateSection + 395)
  
  Error checking 24, {fffff88002811e78, fffff880028116d0, 1904fb, fffff80002aa88de}
  Probably caused by: ntkrnlmp.exe (nt! CcUninitializeCacheMap + this)
  
  Bugcheck 3B {c0000005, fffff80002a902a5, fffff88004628f40, 0}
  Probably caused by: ntkrnlmp.exe (nt! KiSystemServiceHandler + 7 c)

  Ntkrnlmp.exe is a component of Windows which mean than anything else that the leads in
  Fault.

  BiosVersion = F10e DS
  BiosReleaseDate = 01/04/2009
  SystemManufacturer = DataLogic
  SystemProductName = G31M-S2L
  BaseBoardManufacturer is Gigabyte Technology Co., Ltd..
  BaseBoardProduct = G31M-S2L

  1. check with Support Gigabit, their documentation and online drivers. Update the
  BIOS, drivers from the chipset and drivers of major on-board and separate devices (see pilot
  Update methods below). Also check for later versions at Intel and the other device
  tea.

  Support for Gigabyte
  http://www.gigabyte.com/support-downloads/technical-support.aspx

  Gigabyte Downloads
  http://www.gigabyte.com/support-Downloads/Download-Center.aspx

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel Download Center
  http://Downloadcenter.Intel.com/

  Intel - Support
  http://www.Intel.com/p/en_US/support
  Intel - community and Forums
  http://www.Intel.com/content/www/us/en/blogs-communities-social.html

  ------------------------------

  Avast has been executed in two events of BSOD and can cause instability.

  2 uninstall Avast and running of its removal tool to avoid leftovers. MSE - free use

  instead.

  MSE - free
  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  3 check memory very carefully (see memory test methods below).

  4 use ALL other methods in the troubleshooters below if necessary.

  5 if necessary run the Driver Verifier to see if it can indicate a CAUSE (see Driver Verifier
  methods below.

  ====================================

  Resolve errors stop (blue screen) under Windows 7 - has a section for them if you can
  or are unable to start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ====================================

  BCCode: 24 0 x 00000024

  Remove ALL power and reconnect the cables (at both ends, memory and cards)
  When possible) - in fact, remove and replace - do not just tight.

  The main cause of this Bug_Check is disk emits however it can be caused
  problems of memory and same antispyware/antivirus/security programs.

  -----------------------------------

  BCCode: 24 0 x 00000024

  BCCode: 24 0 x 00000024<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votes

  Bug Check 0 x 24: NTFS_FILE_SYSTEM
  https://msdn.Microsoft.com/en-us/library/ff557433%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  ====================================

  BCCode: 1st 0x0000001E

  
  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. Those who are for a PC and on what is possible for a laptop is reinstall the memory and clear the vents. Make sure BIOS, drivers from the chipset of low level and main device drivers are all to date by check manually at the sites of the manufacturers.

  Bluescreens many are caused by the BIOS, chipset of low level drivers and other major drivers that are not the latest, even if the computer is new. Following the link manually check updates using the methods of updates as indicated in the resolution of the problems.

  BCCode: 1st 0x0000001E

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  BCCode: 1st 0x0000001E<-- read="" this="">
  * 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

  Bug_Check 0x1E - read link for the example
  http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx

  ====================================

  BCCode: 3B 0x0000003b

  Try to remove and replace all the memory cards and cables (both ends where possible)-actually delete and replace - not just in the warm (on a PC) and clean the dust bunnies and vents. On a laptop on everything that can be done is to reinstall the memory and clean the vents. (Of course remove ALL power before opening the case).

  
  BCCode: 3B 0x0000003b<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/system-service-exception-0x0000003B-* 1074.html

  Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION<-- read="" this="">
  https://msdn.Microsoft.com/en-us/library/ff558949%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  ====================================

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd partywith their own software and drivers and other major device drivers, you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967
  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen error 0x0000001E on Windows 7 Professional

  Firma problema:
  Problem event name: BlueScreen
  SO version: 6.1.7601.2.1.0.768.3
  Locali impostazioni ID: 1040

  Further information sul problema:
  BCCode: e1
  BCP1: FFFFF80003375610
  BCP2: 0000000000000002
  BCP3: FFFFFA8008AB20E0
  BCP4: FFFFFA8008AB20E0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Problem on Acer laptop with Windows 7 teacher ITA

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ============================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the problems above and/or the
  methods below (which are the same).
  
  
  BCCode: 1st 0x0000001E

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

  2. The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
     Copy

     typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

     Use the command dd (display memory) to this address to view the data.

  3. The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

=========================================================

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

Start - type in the box search-> auditor/Reset hit enter to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

----------------------------------------------------------



References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (main drivers and BIOS)

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.

Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A200 - blue screen error when you try to open HWSetup

  Hello

  I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.

  Any ideas how to solve this problem?

  See you soon!

  Hello!

  Using Windows Vista?
  If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• I get the blue screen error that says CONFIG_LIST_ failed

  I get the blue screen error that says CONFIG_LIST_ failed with the error stop

  0 x 00000073 (0xc000017D, 0 x 0, 00000001 00000001, 0xF90EEBB8)

  and no FAILURE, but also last Config mode. are not able to enter either. PS my CD rom drive has been inoperative for a long time so can't use reinstall disk

  and available good PC has no floppy. Can I use a flash drive to copy all the files needed XP recommended installation. disc?

  Hi philadel37,

  Unfortunately, you can not use the flash drive to restore system files or to solve this problem.

  You will need to use the Windows XP installation disk to perform a repair of Windows XP installation.

  See the article for more information about the Windows XP repair installation.

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Windows Vista blue screen error problem

  It is only this month where I get the blue screen errors but I do not think that I have installed new software. Computers are not really my thing, so it would be a great help if someone could help me solve this problem.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 18441

  More information about the problem:
  BCCode: f5
  BCP1: 0000006
  BCP2: B4647198
  BCP3: B4647168
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini062514-01.dmp
  C:\Users\A\AppData\Local\Temp\WER-6717839-0.SysData.XML
  C:\Users\A\AppData\Local\Temp\WER52E2.tmp.version.txt

  If it's important, please note that I changed the file user has in this post to avoid putting a real name.

  Link to minidump files

  Loriane
  What you see below to happen is a conflict between, AVG, Microsoft Security Essentials, all installed and running at the same time. This conflict is causing file corruption and other problems that adversely affect the stability of your system.

  1. Please download the AVG uninstall tool and save it to your desktop.

  AVG Remover

  http://www.Avg.com/us-en/utilities

  2. If you have currently installed MSE, download a new copy and save to the desktop. The current installation is probably damaged.

  Microsoft Security Essentials (MSE).

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  3. disconnect from the Web.

  4. run the AVG removal tool to uninstall AVG.

  5 uninstall MSE.

  6 uninstall report

  7 reinstall MSE.

  Verification of error F5 {6 d, b 8456, 180, 8456b 150, 0}

  Failed to load image \SystemRoot\system32\Drivers\AlfaFF.sys, Win32 error 0n2
  WARNING: Unable to verify timestamp for AlfaFF.sys
  ERROR: Module load completed but symbols can be loaded for AlfaFF.sys
  Failed to load image \SystemRoot\system32\DRIVERS\avgmfx86.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for avgmfx86.sys
  ERROR: Module load completed but symbols can be loaded for avgmfx86.sys
  WARNING: Unable to verify timestamp for RapportPG.sys
  ERROR: Module load completed but symbols can be loaded for RapportPG.sys
  Probably caused by: AlfaFF.sys (AlfaFF + 3769)

  STACK_TEXT:
  9432b3e0 807b83ce 000000f5 0000006 8456b 180 nt! KeBugCheckEx + 0x1e
  9432b 400 8456b 150 9432 b 420 807b845b 8 d 240769 fltmgr! DoReleaseContext + 0x32
  9432b40c 8 d 240769 8456b 180 00000000 8a2c5918 fltmgr! FltReleaseContext + 0x11
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  9432b 420 8d23e8b6 b0ecb540 8a2c5970 AlfaFF + 0 x 3769 8456b 180
  9432b 454 5918 00000000 b0ed9c88 AlfaFF 012c 8d23ea21 + 0x18b6
  9432b46c 807b70f3 8a2c5918 9432b 490 b0ed9c88 AlfaFF + 0x1a21
  9432b4d0 807ba090 002c58b8 8a2c58b8 00000000 fltmgr! 0x1f1 + FltpPerformPostCallbacks
  9432b4e4 807ba5c6 8a2c58b8 8a2d9298 b 9432, 524 fltmgr! FltpProcessIoCompletion + 0x10
  9432b4f4 807bac37 8bb85150 8a2d9298 8a2c58b8 fltmgr! FltpPassThroughCompletion + 0 x 94
  9432b 524 807 643 9432b 544 00000000 and 00000000 fltmgr cd! FltpLegacyProcessingAfterPreCallbacksCompleted + 0x2e1
  9432b 570 8785f97a 8bb85150 8bb86008 a8dfd314 fltmgr! FltpCreate + 0x2a1
  9432b 588 87a5a86c 33448aa8 8445532c 8b7c1df8 nt! IofCallDriver + 0 x 63
  9432b 658 87a48c9c 8b7c1e10 00000000 84455288 nt! IopParseDevice + 0xf6f
  9432b6e8 87a5622b 00000000 9432b 740 00000240 nt! ObpLookupObjectName + 0x5a8
  9432b 748 87a5b973 9432b 930 00000000 a8dfd200 nt! ObOpenObjectByName + 0x13c
  9432b 964 9432 b 930 87a6077e 9432b7bc 00120089 nt! IopCreateFile + 0x63b
  9432b 818 9432b 964 9432 b 930 807cf7dc 00120089 nt! IoCreateFileEx + 0x9d
  9432b89c 807cf8ce 952d6e30 9523f570 9432b 964 fltmgr! FltCreateFileEx2 + 0xae
  9432b8e4 a 957986, 0 952d6e30 9523f570 b 9432, 964 fltmgr! FltCreateFile + 0 x 38
  9432b 968 957988f5 9432b9b0 b29f231c 00000060 avgmfx86 + 0x16a0
  9432b 990 807 b 7809 b29f231c 9432b9b0 9432b9d0 avgmfx86 + 0x18f5
  9432b9ec 807b9ff8 9432ba2c 8a32d1bc 00000000 fltmgr! FltpPerformPreCallbacks + 0x2e5
  9432ba00 807ccfc0 9432ba2c 807cb88c 00000000 fltmgr! FltpPassThroughInternal + 0x32
  9432ba14 807cd 631 9432ba2c 8a32d008 89eac364 fltmgr! FltpCreateInternal + 0 x 24
  9432ba58 8785f97a 8bb85150 8bb86008 844ea96c fltmgr! FltpCreate + 0x28f
  9432ba70 87a5a86c 334487b 0 81d3435c 8b7c1df8 nt! IofCallDriver + 0 x 63
  9432bb40 87a48c9c 8b7c1e10 00000000 81d342b8 nt! IopParseDevice + 0xf6f
  9432bbd0 87a5622b 9432bc28 00000000 00000040 nt! ObpLookupObjectName + 0x5a8
  9432bc34 87a5b973 00f6e178 00000000 00000001 nt! ObOpenObjectByName + 0x13c
  9432bca8 87 has 21511 00f6e1c0 00f6e178 00100001 nt! IopCreateFile + 0x63b
  9432bcf0 96826d 73 00f6e1c0 00f6e178 00100001 nt! NtOpenFile + 0x2a
  9432bd44 87865c 96 00f6e1c0 00100001 00f6e178 RapportPG + 0x1bd73
  9432bd44 77195d 14 00f6e1c0 00f6e178 00100001 nt! KiSystemServicePostCall
  00000000 00000000 00000000 00000000 0x77195d14 00f6e240

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  AlfaFF + 3769

  8 D 240769?              ???

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: AlfaFF + 3769

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: AlfaFF

  Nom_image: AlfaFF.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 47309837

  FAILURE_BUCKET_ID: 0xF5_AlfaFF + 3769

  BUCKET_ID: 0xF5_AlfaFF + 3769

  Follow-up: MachineOwner

  Remove this driver if you are unable to update.

  1: kd > lmvm alfaff
  start end module name
  8d23d000 8d245d00 AlfaFF T (no symbol)
  Loaded symbol image file: AlfaFF.sys
  Image path: \SystemRoot\system32\Drivers\AlfaFF.sys
  Image name: AlfaFF.sys
  Timestamp: kills Nov 06 11:37:11 2007 (47309837)
  CheckSum: 00011077
  ImageSize: 00008D 00
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Description of the driver: File AlfaFF Mini-filtre Monitor Network Edition system

  Driver update site: http://www.Alfa.com.TW/in/front/bin/ptlist.phtml?category=105437