Blue screen caused by Page fault in non paged error

Similar Questions

• PAGE FAULT IN NON PAGED AREA and IRQL not less or equal

  I left my computer on overnight to come on this morning to find the blue screen of death saying IRQL not less or equal - I tried access through safe mode, but I get PAGE FAULT IN NON PAGED AREA. I tried and it was crossed by the last setting but I just got IRQL not less or equal - it's the next day, I quit a game on last night though.

  Edit: I can't quite

  Have you recently updated the video driver or a service update update it? Try restarting with the VGA driver or last known good configuration.

  Tom

• Satellite C850-1NU - BSOD with Page fault in non paged area error

  So basically I was looking through the web on my laptop, and then suddenly I got a blue screen of death.
  It said Page fault in nonpaged area.

  Some people say it means that the RAM could be faulty.
  Is this true and if it is faulty should I take it back to PC world where I bought it?

  Thanks ;)

  Hello

  The BSOD could be caused by system problems or malfunction of the equipment.

  .. and Yes; the BSOD containing the paginated Page Fault in any area error could be related to memory problems, but it could also be a temporal problem that appeared one last time

  But if this BSOD will appear in the future for the umpteenth time, I recommend you contact the service partner to verify the material.

• Windows 8 errors and Crash_ Page fault in non paged area + attempt to write a readonly database

  Hello

  I am running Windows 8 on my PC and have seen the Failure of Page in the nonpaged area error when starting and stopping down a few times.

  Recently, she was accompanied by an attempt to write a readonly database error starting up, which led to several auto-redémarre.

  Here is the link to download the Minidump files on my computer, if that would help.

  http://1drv.Ms/1nOJ8If

  Please guide me how to on this subject.

  Thanks in advance,

  Rohan

  Rohan

  These related to the 802.11 Wireless netr28x.sys adapt Driver Ralink Technology, Corp..  I would setup the possible latest driver even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading file Dump [C:\Users\Ken\Desktop\New folder\061814-23656 - 01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16864.amd64fre.win8_gdr.140309 - 1509
  Computer name:
  Core = 0xfffff801 'f0c1b000 PsLoadedModuleList = 0xfffff801' f0ee7aa0
  The debugging session: Wed Jun 18 03:25:39.915 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:10.667
  Loading the kernel symbols
  ..

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  .............................................................
  ................................................................
  ...
  Loading user symbols
  Loading unloaded module list
  .....
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88003a1e000, 1, fffff8800529b442, 0}

  WARNING: Unable to verify timestamp for netr28x.sys
  ERROR: Module load completed but symbols can be loaded for netr28x.sys

  Could not read the name of the problem driver
  Probably caused by: netr28x.sys (netr28x + 3e442)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88003a1e000, memory referenced.
  Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
  Arg3: fffff8800529b442, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  DUMP_FILE_ATTRIBUTES: 0X8
  Generated Triage of the kernel image

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff801f0f73168
  GetUlongFromAddress: cannot read fffff801f0f731f8
  fffff88003a1e000 non paged pool

  FAULTING_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  BUGCHECK_STR: AV

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff88000b89230-(.trap 0xfffff88000b89230)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff880039de000 rbx = 0000000000000000 rcx = 0000000000000282
  RDX = a 0000000 00000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff8800529b442 rsp = fffff88000b893c0 rbp = fffff88000b89540
  R8 = 0000000000000001 r9 = 0000000000000114 = 0000000000000000 r10
  R11 = fffff88000b89380 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  netr28x + 0x3e442:
  fffff880 ' 0529b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h ds:fffff880 ' 03a1e000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801f0d363e5 to fffff801f0c75440

  STACK_TEXT:
  fffff880 '00b 89048 fffff801' f0d363e5: 00000000'00000050 fffff880 '03a1e000 00000000 00000001' fffff880' 00b 89230: nt! KeBugCheckEx
  fffff880 '00b 89050 fffff801' f0cafb2b: 00000000 00000001 "fffff880 '03a1e000 fffffa80' 0730eb00 fffff8a0'00000001: nt! : FNODOBFM: 'string' + 0x33c2b
  "fffff880 '00b890f0 fffff801' f0c72eee: 00000000 ' 00000001 fffffa80 ' b 0, 200000 fffff880 '00b 89400 fffff880' 00b 89230: nt! MmAccessFault + 0x55b
  fffff880 '00b 89230 fffff880' 0529b 442: fffffa80'0 b 200000 fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff: nt! KiPageFault + 0x16e
  fffff880 '00b893c0 fffffa80' b 0, 200000: fffffa80 '0b 200000 fffff880' 00b 89540 ffffffff'ffffffff 00000000' 00000000: netr28x + 0x3e442
  fffff880 '00b893c8 fffffa80' b 0, 200000: fffff880'00 b 89540 ffffffff'ffffffff 00000000 00000000' fffff880'05291007: 0xfffffa80'0 b 200000
  fffff880 '00b893d0 fffff880' 00b 89540: ffffffff'ffffffff 00000000 00000000' fffff880'05291007 00000000 00000000': 0xfffffa80'0 b 200000
  fffff880 '00b893d8 ffffffff' ffffffff: 00000000 00000000' fffff880'05291007 00000000 '00000000 00000000' 00000000: 0xfffff880'00 b 89540
  "fffff880'00b893e0 00000000' 00000000: fffff880 ' 05291007 00000000 '00000000 00000000' 00000000 fffffa80 ' b 0, 200000: 0xffffffff'ffffffff

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  netr28x + 3e442
  fffff880'0529 b 442 c7800000040080000000 mov dword ptr [rax + 40000 h], 80 h

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: netr28x + 3e442

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: netr28x

  Nom_image: netr28x.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 531982e8

  FAILURE_BUCKET_ID: AV_netr28x + 3e442

  BUCKET_ID: AV_netr28x + 3e442

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_netr28x + 3e442

  FAILURE_ID_HASH: {5c6cc3bb-48d3-d6cb-422b-45f5619bcc52}

  Follow-up: MachineOwner
  ---------

• Vista updates cause a blue screen (Page fault in non paged area, 0x00000000, 0x00000002, 0xe2249b56)

  I have the same problem with my 32-bit vista, I checked the memory diagnostics and the material is 100% ok, but I can't clean to start windows after updates yesterday (Nothing helps to: No. safe mod or any of that). Please your answer was very comprehensive and detailed for the xp thing, help me with vista (I oc original and I am a telecommuter, so I desperately need my computer fixed at the rear).

  Potatis,
  Here is an article which covers the removal of updates through the command prompt.  Hope this is what you are looking for.
  Command line switches to eat the package
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen on expand page

  Hi guys

  I'm fairly new to lightroom, and for the last few weeks I got a blue screen on the page to develop when I select an image to change. Initially, I thought that I had cropped and fully zoomed in to a pixel but its obvious that it is not that, as I corrected the sizes of zoom and still no difference.

  any suggestions

  

  Clear the option use the GPU in the performance of the LR preferences tab.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• I get a blue screen caused by XDVAnnn.sys event

  I play a game called fiesta online, two weeks ago, when I tried to log on to the game wouldn't load.

  I rebooted the system, and as soon as the process has started I got a blue screen event and was forced to close.

  When I restarted the computer (presario CQ60) a notification has been shown and I reported to microsoft by using the problems and solutions and told me that there is a solution, the exact message is "Malware alert: problem caused by XDVAnnn.sys could be malicious.

  The solution was to scan a complete service in the center of windows onecare. The analysis concluded that there is no virus or anything else except registry problems that have been set.

  My internet security program is no problem and I can not find this program or anything like that.

  I'm using vista Home premium

  Help please, its driving me crazy...

  keeney1,

  Thanks for posting on the Microsoft answers Forum.  I did research on this error and what I found.  The XDVAnnn.sys file is apparently related to X-Trap that uses Outspark (Fiesta manufacturers).  X - Trap is an anti-cheating tool used by this company of online game.  I saw on the Outspark support page they request a screenshot of any error of X-Trap.  You can contact their support for all possible solutions.

  One thing I saw was a suggestion to disable your anti-virus program while playing the game. * DO this at YOUR OWN RISK * disable your anti-virus program can open your computer up to possible infections on the internet.  As you have seen that he is also suspected of having possibly attached to it as well Trojans.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 'Blue screen' causing the computer to stop. 0x9F_3_IMAGE_athr.sys, type 0

  My laptop recently, close and restart when I close. When I open it upwards to use it, I get a problem report that says... "A problem of wireless networking.

  You have received this message because hardware or software on your computer Windows to close unexpectedly and restart caused. It is a serious problem, commonly called a stop error or blue screen.

  Although the precise cause of this problem is not known, it seems to be related to the wireless network.

  To try to resolve this problem, follow these steps. "One step could solve the problem, but if it isn't, then go to the next step.

  I tried to do all the steps, that they suggested and none of them worked. My computer is more than 2 years old. It is a Dell Inspiron 1545.

  When I look at the event viewer, it gives me this information;

  Bucket 0x9F_3_IMAGE_athr.sys of error, type 0

  Event name: BlueScreen

  How can I solve this problem?

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen causing KB2272691 or KB9822110 - I does not start on Win7 64 bit ultimate

  After installing these updates in my pc I get blue screen every time whe windows 7 starts. Restore to solve the problem. So what's the problem with these updates?

  Hello
   

  Method 1.

  Install the updates manually and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  Download the updates from the links below:

  Update for Windows 7 (KB982110)

  Update for Windows 7 (KB2272691)

  Method 2.

  Also, you can zip the minidump in the C:\Windows\Minidump folder files and make available (provide the link) through Windows Live SkyDrive.

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Hope to hear soon back on your part!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• KB9711486 blue screen causing 0x0000007e

  KB9711486 part of the recent automatic updates last Friday (10/16).  XP SP3, INTEL processor.   After the reboot, get a blue screen with the following error message when windows tries to start.
  0x0000007E (0x805c49b8, 0xf7a602b4, 0 x 8000003, 0xf7a5ffb0).  Also impossible to revert to last good configuration.  Get the error "PAGE_FAULT_IN_NONPAGED_AREA).  Requires external to go back to the last good configuration rescue disk.    Given that Microsoft was pressed so many updates (hotfixes about 11 last Friday... and I run autmatic update), it took trial and error to find patch that was causing the problem.  Ignoring this patch at the moment. Lost most of the weekend recovering in activity. Thank you very much.

  Incidentally, now that the PC is working again, getting another error during the operation:
  DSCA.exe - routing of common language of the debugger service Process ID 0x8d4 Thread id (2260) = 0x8d8 (2264).  Anyone idea what all this on and how do I get rid of him?

  I found this and it worked.

  1 boot from your Windows XP or DVD CD and start the recovery console (see this Microsoft Help article at this stage)

  2. type this command: CHDIR $NtUninstallKB971486$ \spuninst

  3. type this command: BATCH spuninst.txt

  4. type this command: exit

• Portege M400: update XP to Vista causes the page fault in nonpaged area

  I spent several hours working through the Vista upgrade only. After a restart the process, I get a BSOD now reporting a page fault. Microsofts advice was to regularize the upgrade and then try again. Useful (or not) This resulted in the same second time around. The office is now closed for the weekend, probably because no one gets questions Friday night / on weekends?

  There is a KB on support.microsoft.com (kb 939720) which refers to a similar problem and a fix, but you can not download it - you must call. All other users Portege had the same problem and how they have solved their?

  Concerning

  Chris

  Hello

  just a quick question: have you already installed the BIOS compatible Vista on your computer? It s one of the most important steps before installing the 'wonderful' on your drive Vista hard (I don't understand why you need but it s OK your machine... ;))

  If it isn't already, go to the website of Toshiba Driver download and download the latest BIOS for machine (Vista compatible) which is absolutely essential if you decided to put Windows Vista on your computer.

  Here´s the link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Would appreciate any comments about your situation.

  Greetings

• Blue screen causing Internet sharing

  I try to use internet sharing with my Nokia Lumia 920 and my windows pc 8 every time my pc connects to my phone, I get a blue screen which says that the computer encountered a problem and needs to restart with an error driver irql. How can I solve this problem.

  It worked for me:

  1. Open the control panel
  2. Click on Device Manager
  3. Expand network adapters
  4. Double click on the wireless LAN adapter
  5. Click the Advanced tab
  6. The selection mode the 802.11n
  7. Change the value to off

• Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"

  Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter

  Hi all

  I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)
  A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:
  STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)
  AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801
  I couldn't find anyone with the same problems. Can you help me?
  Thanks in advance,
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

• Blue screen of the SRTSPL64. SYS (Symantec Endpoint) error on normal startup.

  Original title: , I get the blue screen of death of the SRTSPL64. SYS (Symantec Endpoint) error on normal startup.  How can I get rid of Symantec because Windows install does not work in safe mode?

  System: Windows Vista 64-bit

  Computer: Gateway NV52

  When I start my computer, it stops with the blue screen of death because of the SRTSPL64. SYS error.  I understand that this error comes from Symantec Endpoint that I am running on my computer.  Symantec is provided by the University I attend because users must have a valid antivirus program up-to-date and to access their wireless system.  I want to delete Symantec, but I can't get my calculation to start so I can access the menu to uninstall programs.  I can't uninstall in 'Safe' mode because the Windows Installer is not active.  HOW TO MAKE MY COMPUTER SYMANTEC?

  In addition, I can't a good restore of system restore point so that the option is not available.

  Hello

  I would recommend that you put your computer in a clean boot in SafeMode State, then try to uninstall Symantec Endpoint and check if that helps.

  Note: Follow step 7 to your computer as usual.

  See also:

  How to manually uninstall the client of Symantec Endpoint Protection for Windows Vista, Windows 7 and Windows 2008 32-bit
  http://www.Symantec.com/business/support/index?page=content&ID=TECH102286