Blue screen crash. Error DRIVER_IRQL_NOT_LESS_EQUAL

Good evening!

I recently updated my Windows OS 8.1 and after that my pc has started getting a blue screen with an error DRIVER_IRQL_NOT_LESS_EQUAL (igdkmd64.sys). After going through 2 hours of update and reboot it started randomly blue screen of my PC. Especially after a game. Can it be caused be video card (most likely because the accident happens after a game) because it was not updated to the latest version?

Best wishes!

Hello

Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
online resources and the drivers and ask questions in the forums about known problems.
Updating the BIOS , drivers of low level chipset and embedded and separate major
device drivers
(anyone who can have an impact on the speed of startup and performance).

========================================================

Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.

Translate Windows 7 methods and use them on Windows 8/8.1.

Resolution of the blue screen in Windows 8/8.1 errors
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1)

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if make you it available the onedrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.

Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

A disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

ZIP or download the content of the C:\Windows\minidump

Use OneDrive to upload collected files

http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

-------------------------------------------------------------------------

Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html

===========================================================

BCCode: D1 0x000000D1

Think video drivers especially if it may be others. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
antispyway/antivirus/security programs can also cause this.

---------------------------------------------------------------------------------------------------------

BCCode: D1 0x000000D1

Control 0xD1 bug: DRIVER_IRQL_NOT_LESS_OR_EQUAL

The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

Important info if you received a STOP Code

If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

DRIVER_IRQL_NOT_LESS_OR_EQUAL parameters

The following settings are displayed on the blue screen.


Cause

A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

This bug check is usually caused by drivers who used a wrong address.

If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).

  • The function call was made to a function in another pilot, and that this driver has been unloaded.

  • The function was called by using a function pointer that was an invalid pointer.

Resolution

To begin debugging, use a kernel debugger to get a stack trace.

If the problem is caused by the driver that you develop, make sure that the function that was running at the time bug is not marked as pageable or does not call for all other inline functions that could be paged out.

BCCode: d1 0x000000d1<-- read="" this="">
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

-----------------------------------------------------------------------------------------------------

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)
low level chipset drivers.)

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

----------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • blue screen crash, error: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000).

    Hi all

    Having some problems after a fresh material (a certain components) is installed after the lightning damage, I'm not too technically savvy if I appreciate all help.

    (for some reason, the dump file memory is quite much bigger than normal)

    https://onedrive.live.com/redir?RESID=D3E785F4C52509CE%21303

    any help is greatly appreciated.

    Thank you

    Craig

    Please change your settings to create a small DMP file, as it will be much faster for you to download and we download.  The instructions are in this wiki

    These accidents were related to the corruption of memory (probably caused by a driver).

    Please run these tests to check your memory and find which driver is causing the problem.


    If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

    Since then, it is more likely to be a pilot run everything first.
    1-Driver Verifier (for full instructions, see our wiki here)

    If the auditor does not have the issue we move to it.

    2-Memtest. (You can learn more about running memtest here)


    If you cannot start after you have enabled the auditor reboot in safe mode
    In Vista & win 7 (F8)

    Co-written by JMH3143

    .

  • Blue screen Crash 0x7a error - whenever I play a game fullscreen (in this case, Fallout New Vegas)

    original title: Blue Screen Crash - whenever I play a game fullscreen (in this case, Fallout New Vegas)

    For some reason that I was constantly blue screen crashes whenever I'm playing Fallout New Vegas on my computer. I'm positive my computer takes care of everything, I will list the specs below. He broke down twice today while I played for a good two and a half hours before the first, but then when I rebooted and went back into the game, he has frozen almost immediately so I ended the process. Then I tried once more, maybe got 10 minutes of play until a third crash...

    Here are my specs;

    Biostar H55 HD motherboard Intel

    Intel i3 to 2.93 GHz processor

    Mushkin 4 GB Ram DDR3 (1333 MHZ)

    500 GB Seagate HDD

    NVidia GeForce GTS 450 graphics card

    Orion HP650D 650W PSU

    I went into the Device Manager and ensured that all my drivers are up to date, that don't seem to not be.

    Here are the final details of the accident.

    1

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 4105

    More information about the problem:
    BCCode: 7A
    BCP1: FFFFF6FC400070C8
    BCP2: FFFFFFFFC000000E
    BCP3: 00000000108BA860
    BCP4: FFFFF88000E19008
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\111010-25156-01.dmp
    C:\Users\Adam\AppData\Local\Temp\WER-51921-0.SysData.XML

    2

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.3
    Locale ID: 4105

    More information about the problem:
    BCCode: f4
    BCP1: 0000000000000003
    BCP2: FFFFFA8005B20B30
    BCP3: FFFFFA8005B20E10
    BCP4: FFFFF800031855D0
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\111010-31187-01.dmp
    C:\Users\Adam\AppData\Local\Temp\WER-42468-0.SysData.XML

    If someone could give me a hand I would be very grateful, it became extremely frustrating :(

    Hi Adam,.

    This method works.

    the sfclog tells me that the files in this folder are damaged:

    C:\Program Files\Windows Sidebar\Gadgets\Weather.Gadget\images

    Replace them with the files of your DVDs:

    http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

    BugCheck CRITICAL_OBJECT_TERMINATION (f4)
    A process or thread crucial to system operation has unexpectedly left or been
    terminated.

    1 crash is probably caused by: csrss.exe

    ExceptionCode: c0000005 (access violation)

    the second accident is caused by your HARD disk:
    MODULE_NAME: hardware_disk

    FAILURE_BUCKET_ID: X64_0xF4_IOERR _C000000E_IMAGE_hardware_disk

    Your disk has i/o errors causing Windows to fail. Back up all the data and check the HARD drive with a diagnostic tool.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

    I have my computer to another, here my specs:

    Intel Core 2 Duo
    Hard drive 500 GB
    2 GB OF RAM
    DVD player
    Floppy Disk
    The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
    Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

    Hello

    1 did you change on your computer before this problem?

    2. What is the blue stop screen error message?

    3. When you receive a blue screen during the upgrade?

    You can follow the suggestions and then check.

    Method 1

    Disconnect external devices connected to the computer?

    Method 2

    You can read the article and then check.

    Upgrade Windows XP to Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

    See also:

    Windows 7 Upgrade and Migration Guide

    http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

  • Computer has a blue screen crash about 5 minutes after each start up successful

    Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

    Hi jason12685,

    1. Did you the latest changes on the computer?
    2. When was the last time it was working fine?

    Method 1

    Possible causes of this error include the following:

    • Drive hard damage
    • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
    • Incompatible device driver
    • Incompatible software

    Check out the articles below and try the steps mentioned, check if it helps.

    You receive a random "0x0000008E" error message on a blue screen in Windows XP

    http://support.Microsoft.com/kb/827663

    General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

    http://support.Microsoft.com/kb/945658

    Method 2

    I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

    How to manage devices in Windows XP

    http://support.Microsoft.com/kb/283658

  • When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

    When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

    I can only log in safe mode of network.

    original title: blue screen error

    If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

    "How to solve configuration errors by using the System Configuration utility in Windows XP"
      <>http://support.Microsoft.com/kb/310560 >

    "System Configuration Utility overview"
      <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

    HTH,
    JW

  • A blue screen (Stop error) has been reported. The message contains the error details.

    Hello Hello.
    can someone help me why this error is coming.
    I use a laptop lenovo.
    Error details:
    product-windows stytem, operating
    ID-1003,
    source-system error,
    version - 5.2.
    sysmbolicname-ER_KRNLCRASH_LOG,
    error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

    A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

    Concerning

    Chandra Murali

    .net developer,

    HYD.

    Hi Murali,

    ·         What is the random question?

    Try the following.

    Method 1: Check for memory questions

    Microsoft Online Crash Analysis - windiag

    Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

  • By clicking on the firefox icon causes the blue screen crash

    It started Friday, February 25, at mid-day. The only changes to the system this morning there were a plugin Adobe Flash player or Shockwave update, I'm not sure and an update on the Office of Scottrade Elite trading app. Two of these changes took place around 0900. The problems began around 1130, when the system, Windows 7 Home Premium had a blue screen crash. Therefore, I uninstalled each of the applications mentioned. I can't open Firefox to work on plugins, because whenever I click on the icon I get a crash blue screen with the words "Failure of Page in the nonpaged area" at the top. I also uninstalled and reinstalled the Firefox application with no clear beneficial effect. Scottrade trading app has been reinstalled and working well, causing no other probs.

    Hi all

    I have just recived an e-mail from mrcart and I think it is very likely that his problems were caused by "Iolo System Mechanic Pro":

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-crashes-with-blue-screen-when-running/3e72f5e2-0d59-4946-8050-401a397e2911

    "Windows 7 crashes with blue screen during the execution of IE8, 'page in the nonpaged area failure'...
    What this shows is that the ampse.sys driver is the cause of the crash.
    The ampse.sys is a driver for System Mechanic Pro.
    System Mechanic Pro has been known to cause problems in Windows 7...

    best regards / John Kirk.

  • Blue screen crash

    Hi guys,.

    Its a week ago my laptop started to have a problem with this blue screen crash. This blue screen appeared suddenly and forces it to close. At startup, it hangs at the start page. It appears the Hp Logo in the Middle East and "Press ESC to continue" but nothing happened when I hit ESC. It will take some time before it can be turn on again after clicking on F8 at startup to save Mode.

    Here is the link to the Minidump file

    http://www.mediafire.com/?5c36f4a8iue9oti

    Also, im using Hp Probook 4411 s. I have no idea how to solve this thing crash blue screen. Thanks in advance for your kind answers.

    Have you tried running sfc/scannow? Hello

    Microsoft System Restore can be applied if you enter in safe mode or operating system you can enter inside Windows? No matter if, within windows or safe mode, you can press start, all programs, accessories, System Tools, and system recovery. Will appear a Board where you can select an earlier date in time as attempt to correct the problems.

    Run chkdsk /f /r can be launched in cmd, if you enter in safe mode you can press start, all programs, accessories, cmd. Then type the command and press ENTER.

    If you don t know how to get in safe mode, when you turn on the device immediately press F8 repeatedly, appears advanced startup options and there you can select Safe mode and press ENTER.

    Alternatively, you can run full antivirus scan of the system, but what is your antivirus protection?

    Post the results and doubts or questions Don t hesitate and ask.

    Best regards.

  • Satellite A350 - blue screen with error message

    At the start of windows7, I get a blue screen with error message 0 x 0000116.

    Can someone help please?

    It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

    It is for VISTA but should be the same for win 7 too.

  • Blue screen with error message

    Product name: HP Media Center M7250n desktop PC

    Product #ED842aa-aba

    I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.

    Hello

    If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.

    NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).

  • HDMI causes the 'Blue screen' Crash Vista (64), Dump &amp; Halt

    Vista (64) 'Blue screen' Crash, Dump & Halt causes the HDMI

    I have a HP Pavilion dv9843cl Entertainment Notebook PC

    .. .and when I tried my HDMI it fails and does not hurt with a Vista (64) judgment of crash, dump and system 'blue screen '.

    Any ideas of what can be the cause?  .. .and even better, a solution?

    Greg

    Try the old driver 7.15.11.5665A. I solved my problem with the old driver.

  • HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

    And I also noticed that some hardware is not installed to properliy:

    1 base system device:
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2384 & CC_088000
    PCI\VEN_197B & DEV_2384 & CC_0880

    Device base system 2:
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2382 & CC_088000
    PCI\VEN_197B & DEV_2382 & CC_0880

    3 base system device:
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
    PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
    PCI\VEN_197B & DEV_2383 & CC_088000
    PCI\VEN_197B & DEV_2383 & CC_0880

    unknown device 1
    ACPI\ENE0100
    * ENE0100

    unknown device 2
    ACPI\HPQ0004
    * HPQ0004

    Can someone help me with this problem?

    Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

  • Blue screen driver error less than stop: 0x000000D1

    Hi everyone-

    I get the following error message when you access the Internet (such as randomnly)

    Blue screen driver error less than stop: 0x000000D1 (0 x 00000778, 0xF93D8F0F, 0x00000002, 0x00000001) NDIS.sys - address F93D8F0F base at F93C0000, datestamp 41107ec

    I have frankly not much idea on why this would happened because I don't use a lot of this computer. I actually erase me just my files and photos and to transfer to a USB port so I could donate to this computer. Anyone has any advice they can share? (I did an error checking and it did not work)

    Computer details:

    IBM Think Pad R50 series (R51)

    Windows XP

    Hello

    1. have you made changes on the computer recently?

    Follow the steps listed in the articles below and check.
    Stop error message on a Windows XP-based computer: "STOP 0x000000D1".
    http://support.Microsoft.com/kb/916595

    You receive an error message "STOP 0x000000D1" on a laptop computer Windows XP Service Pack 2
    http://support.Microsoft.com/kb/888399

    I hope this helps.

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

    blue screen code error 0x0000007e

    http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

    http://support.Microsoft.com/kb/953356

    Or more articles in this search:
    http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

    Hope one of these AIDS. QQ learn manage!

Maybe you are looking for