Blue screen of death by practicing a new game.
Hello
I use windows 7 64-bit operating system.
I just installed a game called "counter-strike: overall offensive". "." First of all, he played normally, but after an hour it says their where some files missing, I've fixed the game. When the repair has got 100% my computer immediately got a blue screen of death (first dump file). After I played the game again and it did not work normally. Suddenly, after a few hours, I got another blue screen of death (second dump file).
So, I came across the forums hoping that I would get some answers.
Sincere greetings,
Tarik Atac
Annex:
This is the dump files.
https://onedrive.live.com/redir?RESID=957D95FE262ED04! 115 & authkey =! ADZDM5hlqc1FDYs & ithint = file %2 c
Run these two tests to check your memory and find which driver is causing the problem. Launch auditor. You don't need to run memtest again unless the auditor is not the cause, or you want to.
Tags: Windows
Similar Questions
-
Various blue screen of death windows 7, Asus laptop
Experts/dear Microsoft community,
Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)
My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.
I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.
To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.
Here's the accident report I got the program: Whocrashed
Look forward to hearing your suggestions.
Concerning
computer name: ICRASHEVERYWEEK
Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
Windows dir: C:\Windows
Material: N61Ja, ASUSTeK Computer Inc..
CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4140355584 total
VM: 2147352576, free: 1929850880--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------Crash dump directory: C:\Windows\Minidump
Dumps are enabled on your computer.
Friday, November 7, 2014 22:01:49 this computer crashed
crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Friday, November 7, 2014 22:01:49 this computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Friday, November 7, 2014 18:29:29 GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\athrx.sys
product: Atheros CB42/CB43/MB42/MB43 network card driver
company: Atheros Communications, Inc.
Description: Atheros Extensible wireless device driver
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_MFriday, November 7, 2014 18:27:43 GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTIONFriday, November 7, 2014 6:26:57 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: This indicates that invalid system memory was referenced.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREAFriday, November 7, 2014 17:57:41 CEST your computer crashed
crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
file path: C:\Windows\system32\drivers\atikmdag.sys
product: ATI Radeon Family
company: ATI Technologies Inc.
Description: ATI Radeon driver in Kernel Mode
Bug control description: sounds if a driver attempts to write to a memory segment read-only.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORYFriday, November 7, 2014 17:55:49 this computer crashed
crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\rdyboost.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: driver for ReadyBoost
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.Saturday, November 1, 2014 8:22:52 CEST your computer crashed
crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\drivers\athrx.sys
product: Atheros CB42/CB43/MB42/MB43 network card driver
company: Atheros Communications, Inc.
Description: Atheros Extensible wireless device driver
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:
athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.
Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.
Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.
Analysis of Dump 1Crash
--------------------------------------------------------------------------------Crash dump directory: C:\Windows\Minidump
Dumps are enabled on your computer.
Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
Error: CID_HANDLE_DELETION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: this bug control appears very rarely.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
Error: CID_HANDLE_DELETION
Bug control description: this bug control appears very rarely.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Monday, October 13, 2014 12:15:52 CEST your computer crashed
crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.Sunday, September 28, 2014 17:57:12 CEST your computer crashed
crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
Error: "KMODE_EXCEPTION_NOT_HANDLED"
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: DirectX Graphics MMS
Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLEDMonday, September 22, 2014 6:50:05 PM GMT crashed your computer
crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
Description: NT Kernel System &
Bug control description: This indicates that an error occurred serious memory management.
This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:
dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)
If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.
Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.
Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.
PC! PK
These two were related to the material. Specifically of the RAM. Please run memtest
-
All new computer, blue screen of death/accident
My boyfriend and I bought a new computer 3 weeks ago, it was an e-machine. Kept crashing, got the blue screen of death error. Back to Best Buy for a new computer. Compaq Presario. Has taken a House. The same problem. Returned to Best Buy and exchanged for a new one, exact model. Exactly the same problem. Problem occurs when it is on Facebook, play games or even a game installed on the computer.
I came to the conclusion after hours of research that the problem is Windows 7. It is a brand new computer that I paid a lot of hard earned money for. It should not keep breaking without reason. Was on the phone with HP tech support for over an hour, that still does not solve the problem.
I don't know much about computers and what information you need, so I'll just tell you what's on the box. Let me know if you need more information.
It is a Compaq Presario CQ5320Y PC with a processor dual-core AMD Athlon II X 2 240 Dual-core processor, 3 GB, 500 GB HDD, Nvidia GeForce 6150 SE graphics card.
When it crashes it said space disk or something on a pilot. Launch of Nvidia and the updated graphics driver, it wouldn't let me update the driver for the card mother, says that there is a problem of incompatibiltiy.
Here is the error message we continue to do.
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\061910-15693-01.dmp
C:\Users\lance\AppData\Local\Temp\WER-27830-0.SysData.XML
I've always hated apples but I'm seriously thinking about getting one until Windows can recover, if that's even possible.
As happens with more than one system, it probably isn't a Windows problem and not likely to be a hardware problem. Looks like it's maybe a driver issue, but without more details, it will be difficult to know. Add nothing to the system (software, hardware, etc.) after he unboxing and problems? If you care about that resolve at all - and I don't really think, you should because you get the behavior with new systems (use the warranty and keep complaining the problem if it keeps recurring; get your money back if it is an option, and choose another brand of system.) Keep in mind that you've got a failed system [or the entire model is a dud!] and this should not reflect on Windows 7)-start by downloading the vacuum as described below.
Start here: you can download the c:\windows\minidump content to your SkyDrive and provide a link?
To treat blue screens, following general tips:
Consider running chkdsk on all partitions. Leave complete chkdsk on each partition and see if that helps.
Also consider running SFC/scannow.
Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.
Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that passes the test is not necessarily good - he just failed a test. Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.
If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?
It may be useful to use the driver verifier. To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.
Then restart and use the system as you normally and wait for a problem. In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.
Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.
-
Comments on new MBP XP got the blue screen of death at startup.
I get a blue screen of death when I copied and then started a guest Windows XP on my second MacBook Pro. I've used this comments XP on my old MBP for a year without problems. The two Mbps run VMWare Fusion 3.
During startup, I got the message "features supported by the processor (s) in this machine are distinguished by the features supported by the processors of the machine on which the snapshot has been registered."
Here are the details.
1. I made a judgment of my guest XP on my old MBP
2. I then copied the folder of the Virtual Machine - Open /Users/ - I chose the stermaster2_1VM.vmx -.
2. has asked if the machine has been copied or move - I chose copied.
3 merger then threw "features supported by the processor (s) in this machine are distinguished by the features supported by the processors of the machine on which the snapshot has been registered." -I chose Yes
4 merger threw "cannot connect virtual peripheral Serial0 because no corresponding device is available on the host. You want to try to connect this virtual device whenever you turn on the virtual machine? "- I chose YES
5 merger: "Virtual device Serial0 start disconnected." - I pressed OK
6 merger: "Cannot connect virtual peripheral serial0 because no corresponding device is available on the host." - I chose Yes
7 merger 'VMware Fusion is unable to provide all the graphics features expected by this machine virtual.' - I pressed OK
Then a blue screen of death
I was wondering if you see anything wrong with what I did above.
Thank you
Bernie
Check if you have a file *.vmss in the Directory VM - If yes - delete it and try again
___________________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Blue Screen of Death... Urgent!
Hey all. It's a little urgent, so any help is appreciated. So the story:
It all started last Saturday in the fourth. I plugged my 5s 32 GB iPhone in car charger and it blue screened, what frightens me. I quickly unplugged and and soft restarted as soon as I saw him, and everything was fine.
Since then, so three days later, I had to restart about 50 + times. So today I got sick of this blue screen, and I decided that I would try to fix it. I looked around solutions, and many say that it happens shortly after a solution when you remove the screen, but I've had my phone for four months and have never had to remove from the screen.
The next solution was to restore factory default, so I decided to try it, after that I backed up in iTunes which is
Finally, I was getting it restored, when all of a sudden, BAM. projected again blue.
Since then, happened across this restore Middle blue screen of death, and it's practically a piece of metal shit now. I can't do anything. I can't force the restart it you a blue screen. Can someone give me advice? I have some upcoming vacation and need my phone. Can anyone help?
Try recovery Mode
Connect your device to your computer and open iTunes.
When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.
Keep now until see you the recovery mode screen and wait that he eat.
You may need to do the above, more than once as recovery mode is difficult to enter.
Restore as New first, then restore sauvegardΘ if you wish.
https://support.Apple.com/en-us/HT201263
If the steps above do not help, you tested it on an Apple Store.
-
Blue screen of death WITHOUT Flash Player!
When I try to watch video on YouTube I have Blue Screen Of Death. Sometimes after 1 min and sometimes after 10 min. I have installed Adobe Flash Player because it is not necessary to watch videos on YouTube. I checked disable "enable hardware acceleration and I always get BSOD.» I am running Windows 8.1 with all the updates, and also I've always updated Firefox when there is a new update. I tried to install Flash Player and tried all the solutions I found on the internet but non of them work so I uninstalled Flash Player. On Google Chrome, everything works normally, but I don't want to switch to him whenever I want to watch some videos in the fear of having BSOD. Please if anyone has a solution or an idea, it would be very useful. Thanks in advance!
Hmm, since you have already disabled the main hardware acceleration, it could be a problem with the video (or audio) decoding. For video decoding, you can try these setting changes:
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste media and make a pause so that the list is filtered
(3) double-click the preference media.directshow.enabled to true to false
(4) double click on the media.mediasource.mp4.enabled preference from true to false
(5) double-click the preference media.mediasource.webm.enabled to false to true
(6) double-click the preference media.windows - media - foundation.enabled from true to false
The effect of everything that should be blocking MP4/h.264 decoding and place you in the latest format WebM (VP9) YouTube. You can check the result on this page, but that might not show up after leaving Firefox and start it again:
https://www.YouTube.com/HTML5 (the two h.264 should be red)
It's not so convenient for other video sites, but I'm curious to know if it helps on YouTube or has the same problems.
-
Portege R100 - Random Blue Screen of Death (IRQL not less or equivalent)
Hello
I've been making 'Blue Screen of Death' screens random in the last few weeks. The error is "IRQL not less or equal ' and it performs a memory dump each time. If I get the error and try to restart the phone after, I usually get the same screen of "Blue Screen of Death" when starting.
I have not installed new hardware lately. Last update about a year; upgrade memory. I tried to replace the RAM with a spare that I had and I was still getting the same error.
I have not installed new software in the last weeks, which would coincide with this error.I am tracking the temperature of the processor and I'm higher than 48 degrees Celsius.
I'm not an expert, but I guess it's purely a hardware problem? As I rarely hear the CPU fan, I thought it might be overheating of the CPU.But even after that make the CPU fan to operate at 100% using a free software called "Fan speed" I always got the same random screen of 'Blue Screen of Death'.
I would really appreciate any feedback and assistance. Really, I love my R100 and want to fix it.
Select this option.
Hey,.
> If it's the memory controller can it be replaced?
No, you can only replace the motherboard together. The memory controller is a part of it and it of not possible to replace the memory controller only.Theoretically, it could be the motherboard (memory controller) to malfunction if Memtest86 errors even you have replaced the RAM already.
But 100% sure answer you can get a service provider approved because they have professional diagnostic tools.
Then get in touch with the guy and ask for help. They can also order a new card of mother if she needs to be replaced. -
Satellite M40-236 Blue Screen of Death
A few days ago, I bought a Toshiba Satellite M40-236. I hated the pre-installed Windows XP Home Edition and installed Windows XP Pro with SP2 integrated. Subsequently, I installed all the drivers provided and recommended by Toshiba of: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&teddProduct=5 38 & cmsFamily = Satellite & cmsSerie = Satellite + M40 + Seri are & cmsCategory = Notebooks & mode = allMachines & action = s earch
Video update of Bios, drivers and so on. Everything was well worked, installed all updates from the Microsoft update site and then tried to install Windows Media Player from the microsoft site. Then, when tried to open music file in media player him wound up Windows down with the blue screen of death. After the reboot, the blue screen remained. Tried to load in Safe Mode, last good known... no result... still blue screen.
Tried to reinstall Win XP it Recovery DVD - Rom, the same result... after that the files are copied to the HARD disk and the system is restarted, Win XP Logo current with progress bar and suddenly Blue Screen of Death :(((
Tried to do to reinstall a different version of Windows (2000, XP Home, Xp Pro, 98SE)-no result after that it says from Microsoft Windows (during installation), the blue screen of death and nothing more... STOP: 0x0000007E or STOP: 0x0000007F.
Maybe someone has the same? Can be any solution to this problem? I think because of the laptop is a new... maybe there's sth with RAM?
Hello clotidle
Well, it very difficult to tell what the problem is.
I don t think that the BIOS is wrong because as a wrong
The BIOS update procedure has damage to the motherboard and it is not possible to run or start anything.Sorry I n t have a proper answer.
In my opinion, you should contact Toshiba service partner because I don t think that you will solve this problem yourself.PS: You can downgrade the BIOS t.
Only the AEP has a possibility to do so.Good bye
-
Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot
Aloha everyone,
I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
The installation ended safely. I then install my screen reader, Window-Eyes, requiring a reboot. After the reboot, I started to install critical updates to Windows. On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD. I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice. Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result. I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem. He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember. The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not! To restart the BSOd was back. It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit. The Vista system, the last time I got a BSoD has been for more than a year.After researching this problem on Google, it appears that there is a problem without a solution.
I ran "which has crashed, you can get:
http://www.resplendence.com/downloadsThe following accident report:
Monday, December 21, 2009 23:23:44 your computer crashed
This was probably caused by the following module:
Wininit.exe
Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
Error:
CRITICAL_OBJECT_TERMINATION
Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
file path: C:\Windows\system32\wininit.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: Application to Windows startup
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Monday, December 21, 2009 20:22:10 crashed your computer
This was probably caused by the following module:
Ntoskrnl.exe
Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
Error:
PAGE_FAULT_IN_NONPAGED_AREA
Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Sunday, December 20, 2009 15:28:42 crashed your computer
This was probably caused by the following module:
Ntoskrnl.exe
Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
Error:
PAGE_FAULT_IN_NONPAGED_AREA
Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Thursday, December 17, 2009 12:27:45 AM your computer crashed
This was probably caused by the following module:
Ntoskrnl.exe
Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
Error:
PAGE_FAULT_IN_NONPAGED_AREA
Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
file path: C:\Windows\system32\ntoskrnl.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: NT Kernel System &
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Monday, December 14, 2009 20:59:21 crashed your computer
This was probably caused by the following module:
Wininit.exe
Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
Error:
CRITICAL_OBJECT_TERMINATION
Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
file path: C:\Windows\system32\wininit.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: Application to Windows startup
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Sunday, December 13, 2009 02:17:55 your computer crashed
This was probably caused by the following module:
Wininit.exe
Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
Error:
CRITICAL_OBJECT_TERMINATION
Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
file path: C:\Windows\system32\wininit.exe
product:
Microsoft® Windows® operating system
company:
Microsoft Corporation
Description: Application to Windows startup
The accident took place in a standard Microsoft module. Your system configuration can
be incorrect, perhaps the culprit may be another driver on your system which cannot
be identified at this time.
Conclusion
6 dumps were found and analysed. Note that it is not always possible to
assert with certainty whether a reported driver is really responsible for crashing
your system or that the cause is in another module. However, it is suggested
looking for updates for the products that these drivers belong to and regularly
Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
defective material is in trouble, a Google search on the bug control
Errors, as well as the name of the model and brand of your computer can help you investigate
This further.
end of the crash report.
A side comment:
Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
[Window title]
Incident reports[Main instruction]
Problem connecting to the Windows error reporting service[Content]
Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.[Close] »
I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received. To this end, the problem will not be found.
Thanks much for any help.
Manny
P.S. I'll never upgrade a Windows operating system. My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download. If it works for you, consider yourself lucky and buy the upgrade. If it does not, then remove Windows 7 and stay with your old system.Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
HP deskjet 1510: blue screen of death with the installation of the printer
I installed a new HP 1510 about 3 weeks, no problem... then there's 5 days started to have the blue screen of death (BSOD) on & above. Several hours and attempts to update other drivers, I uninstalled the printer, did a system restore and it worked fine. No BSOD more.
Waited 2 days, for sure - then reinstalled and the same thing all over again. So have uninstalled and reinstalled 3 times.
Ran malware and virus program and nothing came. At the end of my mind - help, please!
I solved the problem by moving to a port 2.0, restore to an earlier time, and then reinstalling.
-
Blue screen of death (Minidump) - several stop codes.
Hello
==================================================
Dump file: Mini101911 - 02.dmp
Crash time: 2011-10-19 14:22:12
Bug Check String: KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug check code: 0x1000008e
Parameter 1: 0xc0000005
Parameter 2: 0xbf80124b
Parameter 3: 0xba127a48
Parameter 4: 0x00000000
Caused by the driver: win32k.sys
Caused by the address: win32k.sys + 124 b
Description of the file: multi-user Win32 Driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 5.1.2600.6149 (xpsp_sp3_gdr.110906 - 1620)
Processor: 32-bit
Plant address: win32k.sys + 124 b
Stack address 1: win32k.sys + 831d0
Stack address 2: win32k.sys + b8fa7
Battery 3 address: win32k.sys + 1142
Computer name:
Full path: C:\windows\Minidump\Mini101911-02.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
====================================================================================================
Dump file: Mini101911 - 01.dmp
Crash time: 19/10/2011-12:01:17
Bug Check String: DRIVER_CORRUPTED_EXPOOL
Bug check code: 0x100000c5
Parameter 1: 0 x 00000004
Parameter 2: 0x00000002
Parameter 3: 0x00000001
Parameter 4: 0x8054bfd2
Caused by the driver: sr.sys
Caused by the address: sr.sys + 4bbf
Description of the file: System Restore filesystem filter driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 5.1.2600.5512 (xpsp.080413 - 2108)
Processor: 32-bit
Plant address: ntoskrnl.exe + 74fd2
Stack address 1: ntoskrnl.exe + 19eb1
Stack address 2: ntoskrnl.exe + aca58
Battery 3 address: ntoskrnl.exe + e44aa
Computer name:
Full path: C:\windows\Minidump\Mini101911-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
====================================================================================================
Dump file: Mini101811 - 02.dmp
Crash time: 2011-10-18 12:45:15
Bug Check String: DRIVER_CORRUPTED_EXPOOL
Bug check code: 0x100000c5
Parameter 1: 0x00076e14
Parameter 2: 0x00000002
Parameter 3: 0x00000001
Parameter 4: 0x8054bfd2
Caused by the driver: Ntfs.sys
Caused by the address: Ntfs.sys + 575 b
Description of the file: NT File System Driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 5.1.2600.5512 (xpsp.080413 - 2111)
Processor: 32-bit
Plant address: ntoskrnl.exe + 74fd2
Stack address 1: ntoskrnl.exe + 19eb1
Stack address 2: ntoskrnl.exe + aca58
Battery 3 address: ntoskrnl.exe + e44aa
Computer name:
Full path: C:\windows\Minidump\Mini101811-02.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
====================================================================================================
Dump file: Mini101811 - 01.dmp
Crash time: 2011-10-18 12:23:39
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x1000000a
Parameter 1: 0x005c003a
Parameter 2: 0x0000001c
Parameter 3: 0x00000001
Parameter 4: 0x80502cd6
Caused by the driver: ntoskrnl.exe
Caused by the address: ntoskrnl.exe + 2bcd6
File description: NT kernel & system
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 5.1.2600.6055 (xpsp_sp3_gdr.101209 - 1647)
Processor: 32-bit
Plant address: ntoskrnl.exe + 2bcd6
Stack address 1: ntoskrnl.exe + 2bf2f
Stack address 2: ntoskrnl.exe + 230d9
Battery 3 address: ntoskrnl.exe + 2316c
Computer name:
Full path: C:\windows\Minidump\Mini101811-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
==================================================So, I'm wondering for corrupted files, I can just remove or repair? For example, I got a blue screen of death before, so I remove the source of the blue screen of death which is
==================================================
Dump file: Mini070811 - 01.dmp
Crash time: 08/07/2011-18:28:31
Bug Check String: IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x1000000a
Parameter 1: 0 x 00000016
Parameter 2: 0x0000001c
Parameter 3: 0x00000000
Parameter 4: 0x80502eb4
Caused by the driver: adasprot32.sys
Caused by the address: adasprot32.sys + 1440
Description of the file:
Product name:
Company:
Version of the file:
Processor: 32-bit
Plant address: ntoskrnl.exe + 2beb4
Stack address 1: ntoskrnl.exe + 2329e
Stack address 2: adasprot32.sys + b31
Battery 3 address: ntoskrnl.exe + 1819f
Computer name:
Full path: C:\WINDOWS\Minidump\Mini070811-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 2600
Size of the dump file: 94 208
==================================================This is an example for you to understand the process. The essential 'Address', what is more important than 'address crash' and ' address 1-3' of the battery. I delete the corrupt of this show. So I wonder is that files that are displayed as blue screen of death appear as new files or has been corrupted (not new, but the changes) so that files is important, it is not good to remove it but just fix it? In this case, it is program file, so that files can be removed, but for above I'll list five blue screen of death (at the top of this page and recently), is files computer, more important than the program files. So I can delete files, but it would affect the entire computer? Or fix it? Another thing that is feature computer sank black and can't restart for some time. Thus, the program can cause corrupted files or delete files that is corrupt to become new and separate, which means that it can be? Are there two types of files? SE do not become like nine files can you repair files, but changes or files that become like new but bad files, it can therefore be removed. Thus, since the site Web who say it is the right program or files, but it is good to scan files that can cause of spyware, malware, virus or a program? So, do you know what could be cause of the last blue screen of death to connect to black on computer screen. It's as if I hard harddirve, but this isn't like that. This is exactly the same process of result with old hard drive causing the computer screen black, but this case is different departure process. If you tell me to use the cd, to solve the problem, tell me what cd and if it is a restore cd that say recovery on the cd for xp or more. It is large and clear a word that mean the recovery? If this is the case, I don't have it. Well, don't have no possible, but in case I did not.
Hello Khalif Foster,
It may be a problem with the Table of master files on the hard drive that does not, however, another option is to use the tool in the mentionted Knowledge Base article.
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617
To verify exactly which driver may be the cause of this problem. (if you don't believe the issue is the hard drive).
Hope this information helps.
-
Blue screen of death after the update installed at startup upward.
I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:
Stop: c000007b {bad image}
The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.
I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.
Install the updates one at a time or 5 at the time may not be a bad idea. Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.
You said you DO or DO NOT have to System Mechanic configured to run at startup? Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat. If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.
The Dell has a number of service tag sticker and if so what does it say? You can search for things by service number
You should make a bootable CD of XP (no XP media required) Recovery Console.
You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.
If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...
First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.
Here's how:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
-
Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E"
Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter
Hi all
I bought a new USB wireless internet and after installing it, it automatically connects to our network, but fails to connect to the internet. (Local access only)A roommate told me that it was something to do with my IPv4 settings. However, after trying to change these settings several times, it always freezes when I push the "close" - button. It is followed by a Blue Screen of Death with the following codes:STOP: 0X0000007E (0XC0000005, 0X92C1B7D1, 0X8C1CBC0C, 0X8C1CB908)AFD.sys - address 92C1B7D1 base at 92C0F000, DateStamp 4db03801I couldn't find anyone with the same problems. Can you help me?Thanks in advance,We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.We prefer at least 2 DMP files to track trends and to confirm the cause.
Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at hereIf you have any questions regarding the procedure, please ask -
Blue screen of death analysis guide
This guide is intended to help an end user to analyse and understand what may have caused their computers to break and cause a blue screen of death.
This guide is an information guide and help you to analyze and try to find what caused the crash and why and not necessarily try to help with the crash itself.
To use the guide, you can use the Table of contents below to access the section that benefits you.
I. introduction
Tools and Computer Configuration II.
III. installation of the debugging tools for Windows
IV. setting up Windbg
V. debuggingIf you are needing help with a blue screen please do not post in this thread. Use the create a new topic and create a thread and post there. This guide is for information purposes only.
VI. resources
Google - when you see a bug check code enter in Google and do a search on it
Bug Check Code référence - guide to the mistakes you can see Microsofts and links
Lack of wire - blue screen error list and to resolve common troubleshooting steps
Forums of HP - you are already here, but we are here to help you if you have blue screens and troubleshoot the best.
-
The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
-Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
Event name: BlueScreen
Answer: no
Cabin ID: 0Signature of the problem:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:Attached files:
C:\Windows\Minidump\Mini013110-01.dmp
C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txtThese files are available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
Online from the best part of twenty minutes before it occurred. The two users of the
program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.Hello
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.BCCode: 7F 0x0000007E
Cause
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
- 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques.
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .
In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.
You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.
-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
http://www.NirSoft.NET/utils/blue_screen_view.html
Displays information on all the "crash" of a table - freeBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
I can't get rid of a few partitions I'd for dual boot than my iMac, but I change my mind, I did before this new version of disk utility I'm not a Fan I have all tried and good now I Restore my Mac and it's going to Can I would like to delete the part
-
The font size in the page mail g became larger, how can I reduce this return to normal 4 x?
Screen of G Mail - suddenly expanded to 4 x normal size. Resized images. 4 x larger than normal fonts. How can I return the screen to normal size. I can't find any way of thei PRI.
-
Satellite U400 - 12 p and mSATA SSD
I have the Satellite U400 - 12 p.The motherboard has two free slots miniPCI if they install mSATA SSD OCZ AC Nocti - MSATA - 120G, for example in these slots?
-
Hello I am able to signal to the DAQ assistant and I take the average of all the data that I get on a cycle, for this I use a while loop and a change of register and after loop finished the race, I've split the output of the shift by the while loop +
-
How to transfer files from one user to another in Windows Vista?
How to transfer files from one user to another under Vista?