Blue screen of death, the PC toshiba laptop!

Similar Questions

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• Various blue screen of death windows 7, Asus laptop

  Experts/dear Microsoft community,

  Recently I had some problems with my laptop. I tried reformatting and everything but nothing seems to solve the problem long term, brief (2-3 days)

  My computer crashes (blue screen of death), whenever I play big games online. Games such as Company of Heroes, or Dota 2, etc. If I don't play these games solo (offline) I have no problems. Also all other programs work perfectly.

  I have a feeling that it has to do with my Asus laptop drivers, I tried to update, restore and re - install, but without result.

  To tell you that as the scenario for the crash: I start the game, I log on online, join a game. Then after 20 to 25 minutes of play online with no loss of FPS, it auto-shutsdown the game with absolutely no message, followed with an accident soon after, sometimes immediately.

  Here's the accident report I got the program: Whocrashed

  Look forward to hearing your suggestions.

  Concerning

  computer name: ICRASHEVERYWEEK
  Windows version: Windows 7 Service Pack 1, 6.1, build: 7601
  Windows dir: C:\Windows
  Material: N61Ja, ASUSTeK Computer Inc..
  CPU: GenuineIntel Intel (r) Core i5 CPU M 430 @ 2.27 GHz Intel586, level: 6
  4 logical processors, active mask: 15
  RAM: 4140355584 total
  VM: 2147352576, free: 1929850880

  --------------------------------------------------------------------------------
  Crash Dump Analysis
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-44912-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5996A0)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 22:01:49 this computer crashed
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0x7E (0xFFFFFFFFC0000005, 0xFFFFF80003BF56A0, 0xFFFFF880035AEE88, 0xFFFFF880035AE6E0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  Bug control description: this bug check indicates that a system thread threw an exception that the error handler did not.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, November 7, 2014 18:29:29 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-17737-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0x1C4F76)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF88005E67F76, 0xFFFFF880035A7438, 0xFFFFF880035A6C90)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  Friday, November 7, 2014 18:27:43 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-14570-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x1421E5)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF88005B4A1E5, 0xFFFFF88003E795E0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. SYSTEM_SERVICE_EXCEPTION

  Friday, November 7, 2014 6:26:57 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110714-15194-01.dmp
  This was probably caused by the following module: atikmdag.sys (0xFFFFF88005B20B5B)
  Verification of error code: 0 x 50 (0x0, 0xFFFFF88005B20B5B, 0xFFFFF8A0024CF000, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. PAGE_FAULT_IN_NONPAGED_AREA

  Friday, November 7, 2014 17:57:41 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110714-49280-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x899D90)
  Bugcheck code: 0xBE (0x12F9A6860, 0xFFFFF880035BC560, 0xFFFFF880062ACD90, 0xE)
  Error: ATTEMPTED_WRITE_TO_READONLY_MEMORY
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: ATI Technologies Inc.
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: sounds if a driver attempts to write to a memory segment read-only.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.).
  Google search: ATI Technologies Inc. ATTEMPTED_WRITE_TO_READONLY_MEMORY

  Friday, November 7, 2014 17:55:49 this computer crashed
  crash dump file: C:\Windows\Minidump\110714-16692-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8000395AA49, 0xFFFFF8800AB310C0, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, November 1, 2014 8:24:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\110114-17550-01.dmp
  This was probably caused by the following module: rdyboost.sys (rdyboost + 0x2C476)
  Bug check code: 0x1000007E (0x0, 0xFFFFF880035248B8, 0xFFFFFFFFC0000005, 0xFFFFF88003524110)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\rdyboost.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver for ReadyBoost
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Saturday, November 1, 2014 8:22:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\110114-18142-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, October 15, 2014 9:09:56 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101514-50856-01.dmp
  This was probably caused by the following module: athrx.sys (athrx + 0xF9D77)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880051BED77, 0xFFFFF880033A7708, 0xFFFFF880033A6F60)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\drivers\athrx.sys
  product: Atheros CB42/CB43/MB42/MB43 network card driver
  company: Atheros Communications, Inc.
  Description: Atheros Extensible wireless device driver
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: athrx.sys (pilot device wireless Atheros Extensible, Atheros Communications, Inc.).
  Google search: Atheros Communications, Inc. SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  13 dumps were found and analysed. Only 10 are included in this report. 2 third party drivers have been identified to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  athrx.sys (Atheros Extensible, Atheros Communications, Inc. wireless device driver.)
  atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  Analysis of Dump 1Crash
  --------------------------------------------------------------------------------

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-17004-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B90)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 5:41:45 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheck + 0x0)
  Verification of error code: 0 x 17 (0x0, 0x0, 0x0 0 x 0)
  Error: CID_HANDLE_DELETION
  Bug control description: this bug control appears very rarely.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 12:15:52 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\101314-17784-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x2EDF95)
  Bug check code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80003145F95, 0xFFFFF88004650448, 0xFFFFF8800464FCA0)
  Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a system thread threw an exception who did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 11:09:34 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-14320-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0xA (28, 0 x 2, 0 x 0 x 0, 0xFFFFF80002F21D80)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 13, 2014 2:53:45 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\101314-46987-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x3B (0xC0000005, 0x0, 0x0, 0xFFFFF88002DA2910)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Sunday, September 28, 2014 17:57:12 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\092814-16926-01.dmp
  This was probably caused by the following module: dxgmms1.sys (dxgmms1 + 0xC0A1)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\drivers\dxgmms1.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics MMS
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.
  Google search: Microsoft Corporation KMODE_EXCEPTION_NOT_HANDLED

  Monday, September 22, 2014 6:50:05 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092214-42525-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1A (0xFFFFF780C0000000, 0x1DEE, 0 x 5003, 0x420700003BD8)
  Error: MEMORY_MANAGEMENT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an error occurred serious memory management.
  This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  --------------------------------------------------------------------------------
  Conclusion
  --------------------------------------------------------------------------------

  7 dumps were found and analysed. A third-party driver has been designated to be the cause of breakdowns of the system on your computer. It is strongly recommended that you check the updates for these drivers on their corporate Web sites. Click on the links below to search with Google for updates these drivers:

  dxgmms1.sys (DirectX Graphics MMS, Microsoft Corporation)

  If no updates for these drivers is available, try searching with Google on the names of these drivers in combination errors that have been reported for these drivers and include the brand name and model of your computer as well in the query. This often gives interesting results of the discussions of the users who have similar problems.

  Read the WARNINGS GENERAL topic for troubleshooting failures of the system for more information.

  Note that it is not always possible to say with certainty whether a reported driver is in fact responsible for crash your system or cause is in another module. However, it is suggested that you look for updates for the products that these drivers belong to and regularly visit Windows Update or activate the automatic updates for Windows. In case a piece of defective material is originally wrong, a Google search on the errors of control of bug with the name of the model and brand of your computer can help you to deepen this review.

  PC! PK

  These two were related to the material.  Specifically of the RAM.  Please run memtest

  

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Blue screen of death, the Tecra M10 runing Win XP

  My Toshiba Tecra M10 works like a dream for three years without ever gasp

  Until the other day.

  My Toshiba laptop is constantly cycling with a BSoD - then I will start windows - it looks like it'll work - it gets in the paper password on screen - then a few blank screens - BSoD then again repeatedly

  I am running XP Pro SP 3

  I couldn't get my laptop to stop doing this, so I removed the battery and then the power cable and it started again and then when he went to BSoD I took a picture of the screen with my digicam fortunately I have one that focuses immediately and take the picture instantly too

  the ERROR is

  BAD_POOL_CALLER

  Tech Info

  STOP 0X000000C2 (0 X 00000043, 0XC38C0000, 0 X 00000000 0 00000000)

  I haven't changed anything on my PC recently and I have tried all the beginning of the top safe mode and last known good configuration but it still cycles round and round and round

  This laptop is not connected to anything and comes standard with a module of memory 2 MB in it to bog

  the last known good configuration does not either, nor did one of the other options in the "safe".

  So I slipped on the HARD drive and tried to boot from my XP CD - not the recovery of Toshiba, one that I have not tried this one in the laptop again.

  Rather unsurprisingly with no HARD drive in the laptop, I got a different error

  STOP 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  which is I believe the inaccessible boot device - I know, it cannot see the HARD drive because it is sitting on my desk but would wait to boot from the XP CD... ISN'T IT?

  I tried to set all the parameters by default both boot - no difference

  With the HARD drive in - the laptop boots as windows user enter screen with no problems but doesn't stop on this screen - after a few screens blank the BSoD comes up and off it goes again.

  In the advanced startup options, I changed auto-start on setting error so it does not loop forever. and this prevents loop to the start cycle... seems to be changing this setting is not a permanent change

  Then I went into the BIOS and under the mode of the SATA AHCI to IDE controller and the STOP error 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000) is gone now and the pc will try to install Windows until I need to see the HARD drive and then gives up trying to install XP with a no. HHD error (the HHD is based of course on my desk) so it was a valid error expected...
  put the HARD return drive without changing the BIOS back makes it appear the STOP 0x000000C2 (0 x 00000043, 0xC38C0000, 0 x 00000000 0x00000000) error

  HELLLLLLLLLLLLLLLLLLLP please

  Hello

  I think you should test the HARD drive don't you agree?
  In my opinion, this should be the first part that should be checked since the new operating system installation was not possible

  I recommend the use of the tool called: HDD Drive Fitness Test. This software creates a bootable floppy to test. You can use this disk to run a test HARD drive without installation of any system.

  If the error would be detected: replace the HARD drive.
  If no error would be: use the Toshiba Recovery disk in order to install the system. (don t forget to put back the BIOS to default)

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Suddenly my laptop refuses to open the log in page and everything leads to blue screen of death, something to do with the hard drive problems.

  I do not quite understand computers.

  Randomly, I received a notice pop up saying that I need to backup my files because windows detected a hard disk problem.

  I did scans and system restore but nothing works.

  I used to be able to access safe mode, but now I do not get this option.

  I kept getting the blue screen of death to do something.

  But now I have nothing other than the loading page "TOSHIBA Leading Innovation".

  I have a Toshiba laptop, his more than two years and use Windows Vista.

  No miracle solution?

  Or should I bring to wait for him?

  If so where I will get the best service at afforable prices?

  Hi BethanyLa Chappelle,

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  What to do if Windows does not start correctly

  What are the system recovery options in Windows Vista?

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Lenovo z50-70 used power up after the blue screen of death on windows 10

  Hello Sir/mam,.

  My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.

  I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.

  When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.

  I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."

  I tried too many times but it won't work.

  Please help me to LENOVO.

  Thank you

  Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.

  I just discovered that one of the ram is not working. That's all /... case closed

• Stop: 0x0000007b (0xf78d2525, 0 x 000034, 0x00000000, 0x00000000) with the blue screen of death

  I have a compaq presario v6254ae and you have the blue screen of death. I tried to restart using all different modes, including the recovery console, nothing helps. Unfortunately, I'm not a computer genius, and the need for the very simple instructions on how to get the laptop back running. I used the system recovery discs, but they are not recognized, so now I'm stuck and no idea on how to remedy the situation. Help, please

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
  http://support.Microsoft.com/kb/324103

  Check your SATA mode setting in the BIOS "is not" value AHCI, set it on the SATA/IDE mode.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to troubleshoot audio issues cause by the blue screen of death?

  I faced a problem with my audio laptop. This operating system: Windows 7 Home Premium SP1. He has some kind of problem when I watch a movie, I can't hear any sound coming through the speakers, and even when I plugged in a headset, the same thing always happens. The problem occurs after I have reformat my laptop because of the blue screen of death.

  Hi Luqmanmuaz,

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  See this article to resolve the problem of aid:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reference:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.