SRP527W with Split Tunnel
Hi guys,.
I just sent a SRP527W that I had lying around for a while.
Everything about the unit works as well as can be expected, however I have an obligation to perform split tunneling for VPN users.
Currently, the only way that receives the VPN client is a default route. I noticed that on site-to-site VPN and tunnels GRE, you can specify safe routes, but I can't find anything that relates to remote VPN users. This can be done on IOS without problem, but would be good for the RPS.
I'm under the latest firmware 1.01.26, so if I have not forgotten anything it would be probably for a future version?
See you soon.
Bryce
Hi Bryce,.
Nothing is overlooked, it is not possible to set up split tunneling for the VPN of the RPS server.
Kind regards
Andy
Tags: Cisco Support
Similar Questions
-
VPN3005 - PIX506 using NEM &; IPP with split tunnel
After the design is given
VPN3005 (central) - tunnel - PIX506 (Remote) network-extension-mode & RRI
A VPN (PC) Client connects to VPN3005 and wants to reach the server at the site of PIX506 above the tunnel of 3005 to PIX506.
At the same time the users on LAN Pix506 want to use Internet directly - which means
split tunneling should be used.
On VPN3005 under IProuting - RRI - IPP network extension and
Customer IPP is enabled.
Connectivity between LAN (central) and LAN (remote) is known, but IPP for
VPN Client (PC) (wants to connect to the server on the Remote LAN) is not possible.
If split for ezvpn (PIX506) tunneling is used.
It works, if you all tunnel!
Question:
Is this cause is not possible, this feature (EZVPN + RRI + split-tunnel) is not implemented, or if this thing works well?
(Even behave with a real HW3002)
BTW. VPNConc3.6.7 (3.6.3,3.6.5,3.6.7A), HW3002 3.6.7, PIX 6.2.2 (6.3.136beta)
Images in brackets have also been tested with even behave.
Thank you for the help & information
This thing in advance.
Kind regards
Stefan
You have the pool of addresses VPN client in the tunnel of split for the PIX list? The troubled with making split tunneling is that traffic has behind the PIX for this network first, then only ITS special is based for this particular network subnet. If you try to connect via a client, or even to the LAN behind the 3005 (same thing in theory), then unless someone behind the PIX sent traffic to this subnet first, your traffic will not get there.
When the split tunneling is not used, the PIX automatically creates the SA for all networks, and that's why you can then test the hosts a VPN client (or to the LAN behind the 3005).
Take a simple test and launch a VPN client to the 3005 connection, making sure that the address pool is in the list of PIX split tunnel. If you try and ping from the client to the PIX network it will not work. Now have someone behind the PIX ping to the address of the VPN client, you will probably lose the first packages of one or two, but then it should respond OK. NOW try to VPN client and ping, PIX network, it should work now, because the PIX has built the tunnel to the address pool.
-
Problem with route on PC with split tunnel VPN
Hi all
I have the following situation:
ASA 5515 X 8.6 running
I have several inside sub interfaces:
.10 = 192.168.10.124
.11 = 192.168.11.124
.12 = 192.168.12.1/24
.13 = 192.168.13.1/24
.14 = 192.168.14.1/24
Now, I want to implement a VPN IPSec remote access:
I attribute the range 192.168.99.5 to 192.168.99.50 for VPN clients.
I have configured the tunneling split for the following networks: 192.168.10.0, 192.168.11.0 and 192.168.12.0
They are also exempt from NAT.
So the config looks good.
The VPN is in place.
However, when connecting to the VPN, none of these networks are available.
After troubleshooting, I discovered the following:
Received my card VPN IP address is 192.168.99.5 (as expected)
However, when I make a copy of the itinerary, I see the following:
Destination netmask gateway interface
192.168.10.0 255.255.255.0 192.168.99.1 192.168.99.5
192.168.11.0 255.255.255.0 192.168.99.1 192.168.99.5
192.168.12.0 255.255.255.0 192.168.99.1 192.168.99.5
The entry door to the routing of my PC table is pointing to a non-existent address, in my opinion it schould be on the same address as my adapter VPN (192.168.99.5).
I tried this with annyconnect and the classic VPN client.
Where I'm going wrong?
No, this ip pointing 192.168.99.1 route is correct. It is not the cause of the problem.
-
Site to Site with split tunnel question
I can't spilled tunnel to work on my router from production
config:
int serial 0/0/0
External DESC
Add IP x.x.x.x x.x.x.x.x
NAT outside IP
IP virtual-reassembly
card crypto ipsec-map
int fast 0/0
DESC internal
IP add y.y.y.y y.y.y.y
IP nat inside
IP virtual-reassembly
overload of IP nat source inside the interface serial 0/0/0 of the 101 list
Nat ACL
access-list 101 deny ip 192.168.2.0 0.0.0.255 10.10.10.0 0.0.255.255 connect
access-list 101 permit ip 192.168.2.0 0.0.0.255 any what newspaper
card crypto acl
access-list 102 permit ip 192.168.2.0 0.0.0.255 10.10.0.0 0.0.255.255 connect
I can't get either to work but not together.
Your thoughts are appreciated. I read about the order of operations with NAT, but still no dice.
Steve
Hi Steve,.
I had a similar problem and got around it by using a map of pool and of course nat... This allowed me to divide the tunnel. First of all, get out your source line of nat ip inside the overload of the serial interface 0/0/0 list 101 and then add the following.
NAT pool "pool name" "ip IP position of ' ' ext to(can be the same as ip ext to' netmask 255.255.255.252 ip
IP nat inside source overload sheep pool «pool name» route map
sheep allowed 10 route map
corresponds to the IP 101
!
hope this works for you
Thank you
Andrew
-
Access restricted without the split tunneling
I'm disabled with Split tunneling VPN concentrator. Split tunneling has been disabled to carry the internet traffic of vpn clients via our internal web filtering server. But I must restrict access to my internal servers. How can I do that. I tried with filters/Rules but his does not work, and depending on the traffic of documents filter applies only to the traffic unencrypted.
Thank you
Avil
If you use a VPN3000 while you can apply a filter to the users configured in group. This filter can restrict access to the servers as a list of specific protocols and access. This filter certainly applies to ENCRYPTED traffic, do not know what you are referring to your last sentence.
You must first define the rules to define the traffic you want to restrict address., see here for more details:
http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3000/4_1/config/polmgt.htm#1321359
Define a filter, then add the rules you just set it to him:
http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3000/4_1/config/polmgt.htm#1007037
Thne go under the group that these users are configured with, and then apply the filter to it.
A couple of sample filter are the following:
Allow access to 10.1.1.2 and block everything else:
To block access to everything, but 10.10.1.2, create a rule that is Inbound/Forward, Source of Anything, Destination of 10.1.1.2/0.0.0.0. Create another rule, it can be left at the default value which is incoming, drop, no matter what Source Dest what whatsoever. Create a filter with the default action of the front and add two new your rules, ensuring that rule that allows access to the host 10.1.12 is above the default rule which will pass everything else.
Block access to 10.1.1.2, and leave all the rest:
To allow access to everything except 10.10.1.2, create a rule that said, drop, no matter what Source and Destination of 10.10.1.2/0.0.0.0. Add a filter that has a default action is to send, add the rule to the filter.
Notes:
-You can allow or block access to subnets simply by changing your address/mask to something like combination: 10.1.1.0/0.0.0.255
-
Even after the "split-tunnel-policy tunnelspecified" specification with "split-tunnel-network-list value TUNNEL of SPLITTING" and denying all traffic to the public IP address of the ASA, I'm still not able to SSH in the firewall. Everything else seems to work OK, but I have to be able to handle the ASA from the public interface. In fact, I expect little given the mean one sa is the installer for the tunnel, and it would seem that a deny statement would be ignored, but perhaps there is a way around this. Thank you.
If you want to connect to your home IP through the tunnel, you must specify 'inside access management:
http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/a...
Best regards, Karsten
Sent by Cisco Support technique iPad App
-
Hi guys,.
I wonder if remote access VPN with split tunnel is using the home user or the corporate to surf internet connection own internet connection?
Any help will be greatly appreciated.
Thank you
Lake
Dear Lakeram,
Split tunneling allows you to access certain resources through the tunnel and all other traffic will be sent to your local proxy.
VPN traffic is defined by the VPN endpoint, for example:
192.168.1.0/24---Internet---ADSL ASA VPN client-
You can have the ASA push the network 192.168.1.0/24 to the customer. Once connected if the client tries to access everything that comes out of the scope of the network, this traffic will be sent to the LAN...
Here's an example with ASA and router.
ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml
ASA 8.x: allow the tunneling split for AnyConnect VPN Client on the example of Configuration of ASA
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml
Router allows the VPN Clients to connect to IPsec and Internet using Split Tunneling Configuration example
I hope it helps.
Thank you.
-
Split tunnel setup on asa 8.4 with 6.4 AMPS
We have established and work, with the exception of tunneling split anyconnect.
the 6.4 AMPS I went to: remote VPN access > (Client) network access > Group Policy > GroupPolicy_anyconnect_vpn > edit > advanced > split tunneling > then unchecked "inherit" on list of network and selected an ACL called "TUNNEL of SPLIT.
the ACL is pasted below the CLI, it is all of our internal networks, everything is static routed and on the same vlan
SG-ASA-1 # sho - TUNNEL of SPLITTING access list
list of access TUNNEL of SPLITTING; 10 items; hash name: 0x25b1daf1
Access-list 1 permit line SPLIT TUNNEL extended ip 192.168.100.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe3a9484b
permit for SPLIT-TUNNEL list lengthened 2 ip 192.168.105.0 access line 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x377afd96
allowed for access list 3 SPLIT-TUNNEL line scope ip 192.168.110.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x0b4d6f9c
line 4 extended to the TUNNEL of SPLIT-ip access list 192.168.120.0 allow 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x7a6cc93f
allowed for access list 5 SPLIT-TUNNEL line scope ip 192.168.130.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe228bdad
allowed for access list 6 SPLIT-TUNNEL line scope ip 192.168.140.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x317f80c8
allowed for access list 7 SPLIT-TUNNEL line scope ip 192.168.150.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe4c276b0
allowed for access list 8 SPLIT-TUNNEL line scope ip 192.168.160.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x0c2dd3ab
allowed for access list 9 SPLIT-TUNNEL line scope ip 192.168.170.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x00a4d4e3
permit for line TUNNEL of SPLITTING access-list 10 scope ip 192.168.180.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xfb381008
SG-ASA-1 #.After this setting in the Group of ASSISTANT Deputy Ministers policy, we tested in vain yesterday morning. They can connect and ping all those inside network but not the internet. The journal of the asa showed what follows when a vpn client tried to ping Yao
6 August 14, 2012 07:51:04 64.60.xxx.xxx 4397 206.169.203.226 1433 routing cannot locate the next hop for TCP to inside:64.60.xxx.xxx/4397 to outside:206.169.203.226/1433
We can ping the inside no network problems after you connect to the VPN from outside.
64.60.xxx.xxx is our public IP address that is on the external interface, which is the IP address we use to vpn.ourdomain.com
Thanks in advance for any help
Hello
You can try to use the standard access list in the same menu.
List of strategies for the tunnel CLCK spit > click on manage, select the standard acl tab and only add 192.168.0.0 255.255.0.0 (for testing purposes)
Then test if it works to connect to Internet
The filtering you want, highest in your message you can do it with a security acl.
If it works, you can add more specific standard ACL split tunneling list, as
Add 192.168.100.0
etcetc
-
Split tunnel with ASA 5510 and PIX506.
Hello
I have the production between Asa 5510 (main office) and Pix 506 VPN tunnel. It is configured so that all traffic is encrypted and moves through the tunnel. This includes remote users behind Pix Internet traffic. I would like to use split tunnel and direct Internet traffic hitting the web directly from Pix instead of going through the tunnel. How can I do this safely? Please see current config Pix below:
:
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 10baset
ethernet0 nameif outside security0
nameif ethernet1 inside the security100clock timezone EDT - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
No fixup protocol dns
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
No fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
no correction protocol tftp 69
names of
allow VPN 192.x.x.x 255.255.255.0 ip access list one
LocalNet ip access list allow a whole
pager lines 20
opening of session
monitor debug logging
logging warnings put in buffered memory
logging trap warnings
Outside 1500 MTU
Within 1500 MTU
IP address outside 24.x.x.x 255.255.255.0
IP address inside192.x.x.x 255.255.255.0
IP audit name Outside_Attack attack action alarm down reset
IP audit name Outside_Recon info action alarm down reset
interface IP outside the Outside_Recon check
interface IP outside the Outside_Attack check
alarm action IP verification of information
reset the IP audit attack alarm drop action
disable signing verification IP 2000
disable signing verification IP 2001
disable signing verification IP 2004
disable signing verification IP 2005
disable signing verification IP 2150
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list LocalNet
Route outside 0.0.0.0 0.0.0.0 24.x.x.x
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac AMC
map UrgentCare 10 ipsec-isakmp crypto
card crypto UrgentCare 10 corresponds to the VPN address
card crypto UrgentCare 10 set counterpart x.x.x.x
card crypto UrgentCare 10 value transform-set AMC
UrgentCare interface card crypto outside
ISAKMP allows outside
ISAKMP key * address x.x.x.x 255.255.255.255 netmask
ISAKMP identity address
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
SSH timeout 15
Console timeout 0
Terminal width 80
Cryptochecksum:9701c306b05151471c437f29695ffdbd
: endI would do something by changing the acl that applies to your crypto card. You want to know what you want to support above the tunnel and then deny other networks.
If you have:
192.168.3.0/24
192.168.4.0/24
10.10.10.0/24
172.16.0.0/16
Do something like:
VPN access list allow 192.x.x.x ip 255.255.255.0 192.168.3.0 255.255.255.0
VPN access list allow 192.x.x.x ip 255.255.255.0 192.168.4.0 255.255.255.0
VPN access list allow 192.x.x.x ip 255.255.255.0 10.10.10.0 255.255.255.0
VPN access list allow 192.x.x.x 255.255.255.0 ip 172.16.0.0 255.255.0.0
Then when the traffic is destined for something other than these networks, it will go not to the ISP instead of the tunnel.
HTH,
John
-
Hello
We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages
---------------
001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)
001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr =
Server_public_addr = 004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16
---------------
Future prospects for aid and the suggestion of experts
Thank you
Israr Ahmad
Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.
Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.
-
I'm working on an installation of the laboratory program at home with my X-5506, and I got a split tunneling configuration problem. Every change I seem to give me internet access, gives me access to the local network or remove both. The current configuration, I took them both and I am a little puzzled. I have attached the configuration. Any guidance would be greatly appreciated!
Change:
split-tunnel-policy excludespecified
TO:split-tunnel-policy tunnelspecified
I notice you are using 192.168.0.0/24. Make sure that you do not work VPN'ing an address 192.168.0.0/24 as well (or a subnet that is also identical to your subnet that you are trying to access remotely) or it won't work. Overall, you should avoid using 10.0.0.0/24 and 192.168.0.0/24 in production networks because they are so frequently used in home networks. I also note that you have configured IKEv2. IKEv2 does not support split tunneling. SO be sure you use only the AnyConnect client in SSL mode. -
Cisco ASA ruled out a specific ip address of the split tunneling
Hello
I need help with a question on the split Tunneling Configuration.
I have need exclude split tunneling networks already configured a specific ip address.
This is my setup:
Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0attributes of Group Policy GroupPolicy_Anyconnect_Access_Exception_1
WINS server no
Server DNS value xxxxx xxxxxxx
VPN - connections 3
VPN-idle-timeout 480
VPN-session-timeout no
client ssl-VPN-tunnel-Protocol
value of group-lock Anyconnect_access
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Split_Tunnel
field default value xxxxx
Split-dns value telefonica wh.telefonica cic.wh.telefonica telefonica.corp t380.inet
mailar.telefonica.Corp mailar.telefonica.com tefgad.com telefonicaglobalsolutions.com
telefonicabusinesssolutions.comI need to exclude the split tunnel, IP 10.0.0.50, my question is, if I change the list access deny this IP, the supplementary tunnel will exclude the period of INVESTIGATION.
example:
Split_Tunnel list standard access deny 10.0.0.50 255.255.255.255
Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0BR,
Fidel Gonzalez
Hi Fidel,
Yes, it should work; as in your example deny 10.0.0.50/32 sholud exclude the traffic in the tunnel.
I tried in my lab, and in my case, access-list is:
split_1 list standard access denied the host 10.2.2.250
split_1 list standard access allowed 10.2.2.0 255.255.255.0And it worked he excluded the 10.2.2.250 host.
The screen shot of the AnyConnect added:
Concerning
Véronique
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
No split tunnel-access internet via isa in dmz
Hello
I have configured my asa 5520 v 7.2 for remote VPN. Its works fine. I need to provide my customer internet access without activating split tunnel. I went through a few example below of a doc:
the preceding is not enough more me like one have different needs
I want my client VPN to ASA and access to internet, I had ISA connected to the VPN device. All my vpn clients want access to the internet, it must use this operation to access the internet. My ISA server is in the same subnet of the VPN device by using a different gw for internet access.
Pls comment
Add the below: -.
attributes of the strategy of group staffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
attributes of the strategy of group staffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
attributes of the strategy of group newstaffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
adel username attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
username weppe attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
Remote VPN group no matter what you want to test with. where x.x.x.x is the IP address of the ISA server computer.
HTH.
-
Web VPN/SSL - general Split Tunnel capable?
When I look through some examples of configuration for IOS Web VPN - it seems you attract to the filling of a web page of web sites that users can go to. I would be rather thin client act as client light 4.x CVPN - divided for example tunnel with access to a resource internal resource. Is this possible with Cisco VPN Web? Also - with is WebVPN any ability of the NAC?
I'm not sure IOS SSL vpn, but on the asa webvpn, there is a complete client ssl option. With this, you can either create a tunnel, or all split tunnel and the only defined networks. I hope that answers your question.
Maybe you are looking for
-
Ear buds suddenly stop working
After update to iOS 9.3.5 my headphones suddenly stop. I'll try other headphones with the same result. Only way to resolve is to stop and restart the phone. Anyone else having this problem?
-
When you add items to a project can then remove the clips? I'm trying to free up space on my hard drive. Thank you.
-
Equium A60: random screen blackouts
Hey guys & girls, I recently bought a P4 A60 satellite at Christmas and since then I ve had a small number of growing problems and I was wondering if anyone knows the same thing? It only worsened recently when windows XP home wouldn t start so I had
-
Start TDM importer Excel automation index
I'm trying to create a macro in excel to import and format data from a .tdm file. The files to import sometimes exceed the limit of 1 M in Excel line, when that happens, so I want to generate two workbooks. One of these binders to be generated from a