Blue screen of death, the Tecra M10 runing Win XP

Similar Questions

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• Blue screen of death, the PC toshiba laptop!

  Ive been doing blue screen of death, what happens is that when I start my laptop it goes to the windows loading screen and it doesn't go to the login screen. It automatically restarts and the same thing happens. The error is as follows:

  Stop: 0 x 00000024 (0 x 00190203, 0x8A9D4828, 0xC0000102, 0x00000000)
  Ive had 2 technicians and really I just have trouble according to them to solve the problem, sometimes I do not trust what they do and others, I have just 17 so I just try to be careful.
  Anyway, I've heard of what is called a CHKDSK with the windows disc and it would continue with a windows disc, Ive tried the windows disc and when I press R on my keyboard, it just says: can not find a hard drive.
  My priority here is now all of my files and solve the problem.

  If it supports booting from a flash drive, and you have one, put this on it then run it .

  0 x 00000024 can mean the hard disk is full error / corrupt / failing and should be replaced as well

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

  Stats:

  Computer type: HP-Pavilion a6333w

  Product #: KC746AA #ABA

  Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

  Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

  Disk space: 500 GB

  RAM: 3 GB

  Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

  ---------------------------

  Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

  Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

  I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

  None of these online solutions have worked.

  ---------------------------

  Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

  If there is a way to save the info on my HD it please let me know.

  Thanks, Jcubed.

  Message edited by Jcubed on 11/12/2008 18:06

  I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

  http://support.Microsoft.com/kb/946084

• Qosmio G25: blue screen of death in the course of watching TV

  I also get the blue screen of death (Qosmio G25) and without apparent reason. I just watch a HD channel for an hour and it just hangs at random while the TV was going on. His crashed a few times before that too. But the strange thing is that I never changed anything, I just watched TV and went to the blue screen with the code everywhere.

  Does anyone else have this problem?

  Kind regards
  Stephen

  Hello

  AFAIK the Qosmio G25 was designed for the American market.
  All laptops that end in 5 are for the U.S. market.
  However, it is not easy to say why it happens.
  I assume you are using the image of Toshiba's own operating system.
  I checked the driver Toshiba U.S. page and found a few drivers.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp?

  You can check that you have installed driver TV tuner driver and BIOS versions.
  Maybe a BIOS update will help you.

  But the blue screen of death is usually due to the fault of hardware or software serious dysfunction.

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Lenovo z50-70 used power up after the blue screen of death on windows 10

  Hello Sir/mam,.

  My laptop wouldn't boot / lights up once the blue screen of death appeared this morning.

  I am browsing and suddenly the blue screen appeared and I remember in the written form 'system error' and the laptop will restart. something like that. I can not really remembered the exact error. But I'm sure it's the BSOD.

  When I tried the laptop powered, the power light was for about 1-2 sec even with the fan, and then they continue or let's just say that it will not feed. I've done several times, but the result is the same.

  I also tried the solution on what I read here in the forum. "Press and hold the power down for about 30 seconds."

  I tried too many times but it won't work.

  Please help me to LENOVO.

  Thank you

  Thanks for the reply. I already solve the problem. I already did what you said so many times, but did not work.

  I just discovered that one of the ram is not working. That's all /... case closed

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• I left my computer on overnight, (playing the music on a youtube video) and I woke up to a blue screen of death. What does that mean?

  So I went to sleep last night I left my computer on playing a Youtube video that was about 45 minutes. When I woke up and looked at my computer screen, I discovered that I had the blue screen of death. Was this a memory problem? My computer could not handle being on all night?

  I have Microsoft Security Essentials, I scanned my computer (quick scan) and it found no virus. Should I just not leave my computer all night next time?

  I'm moving your message to the performance and maintenance of the forum for Windows section.

  The cause of the BSOD is generally not a virus. Details of the BSOD, including the potential cause, could be able to be determined on the basis of the error information. It could be hardware, memory, overheating, etc..

  -steve

• I get the blue screen of death, I do before going to the Geek squad?

  I get the blue screen of death, I then close my pc and restart in safe mode and then trouble shoot. I can then restart normally and then it is fine for awhile. I don't always have to be on the internet to get the blue screen. I have AVG and super anti-spy ware and run full scans and they say that there are no threats. So what else can I try?

  Messages you receive when you restart the computer, more a review of the event viewer should help you determine what is causing the BSOD.  The BSOD is not necessarily related to malicious software.

  You have posted in the forum for the forum of anti-malware for Microsoft Security Essentials (MSE).  Since you're using AVG, your post is off-topic for this forum.

  You can expect from a forum moderator move your message or if you want to, you can seek assistance in search and/or post in the appropriate Forum Windows:

  http://answers.Microsoft.com/en-us

  Kind regards...

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• HP deskjet 1510: blue screen of death with the installation of the printer

  I installed a new HP 1510 about 3 weeks, no problem... then there's 5 days started to have the blue screen of death (BSOD) on & above.   Several hours and attempts to update other drivers, I uninstalled the printer, did a system restore and it worked fine. No BSOD more.

  Waited 2 days, for sure - then reinstalled and the same thing all over again.  So have uninstalled and reinstalled 3 times.

  Ran malware and virus program and nothing came. At the end of my mind - help, please!

  I solved the problem by moving to a port 2.0, restore to an earlier time, and then reinstalling.