Blue Screen (screen of death) occurs at the Normal boot and Safe Mode

Similar Questions

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?

  Why do I get the blue screen of DEATH most of the time when I try to print on my HP Office Jet printer?  Almost everytime I try to print to the printer HP Office Jet m I get the Blue Screen of Death in the middle of printing or shortly after that my document is printed.  I then have to shut down my computer and restart it.  I am running Windows 7.

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask
  
  

• Blue screen of death: 0x0000007E, have tried many things and am stuck

  Hi, since last night when you try to start windows vista sp1, I find myself with a blue screen. The only line is
  stop: 0x000000E7... 4. follow more similar numbers, I am sorry that I have not exactly those with me right now. No specific file or error is referenced also.

  I have already tried:
  -Startup Repair (did nothing)
  -System Restore (several points of system restore was successful but I still have a blue screen on reboot for example)
  -chkdsk - was suggested and I ran it, but it found no errors (accessed via the Startup Repair menu command prompt)
  -safe mode - all modes of Security 3 Blues the same screen when starting
  -bios Dell diagnostics came out clean
  -Memtest86 boot from USB was released with pass 100% and no error
  I have not recently installed the drivers or programs

  Any suggestions would be helpful! I do not want to reinstall windows, at this point a repair would be useful!

  Hi herestothenight22,

  1. how much memory stick (live RAM) you have on the computer?

  2. did you of recent changes on the computer?

  If you have more than 1 GB of RAM installed on the computer, then I suggest that you remove all of the memory sticks and just keep 1 GB of RAM on the computer and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen. Windows does not start. Even on Safe Mode!

  When I turned on my laptop the windows logo and everything is in place. But then comes the black screen and ask the options to start windows normally, start in safe mode, ect. I chose to start normally, then a blue screen appears which says that the computer has shut down to prevent damage. He said that I had to disable all anitivirus and other things that I don't have to read. I tried every other selection as start in safe mode, start in safe mode with command prompt, in the other options, I get the same blue screen. I really need to get this problem fixed. I have no CD of installition XP, I have no CD of restoration, I have nothing to work with, so I just need to know a way around it.

  There is no magical way around that without any installation disc. Most laptops come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25.

  Before you try to restore the computer, you must determine if the material is good. You can test yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  A good troubleshooting step is to start with a Linux Live CD. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

  If the equipment is faulty, if you replace it or not depends of which component is bad and the age of the machine.

  If the material is good (maybe Windows has been severely infected with a virus/malware and that's why he no longer starts for example), then perform a restore if you plant using any method has been provided by the computer laptop mftr.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
  MS - MVP - Elephant Boy computers - don't panic!

• Blue screen of death after running the update from microsoft.

  Stop: 0x0000007e (0xFFFFF800010305C3, 0xFFFFFADEC2E08150, 0xFFFFFFFFC00000005, 0xFFFFFADEC2E07B60)
  It is the only information I get the blue screen. It is a new workstation 7500 Dell with Windows 7, downgraded to Win XP Pro (because of the requirements of software). I have two more 7500 workstations that are exactly as this one do not experience this problem. I was pulled to microsoft update and expressed option, begun to load all the necessary updated (27) and one failed. The Net.Framework 1 after install, I was asked to reboot. When it came, it stopped support windows with the blue screen. This system is as follows:

  Dell Precision T7500 workstation

  1 CPU X 5570 Quad Core 317-0277 2.93GHz,8M,6.4GT/s,Dell Precision T7500

  1 317 - 0333 12 GB DDR3 SDRAM ECC 3x4Go, 1066 MHz, Dell Precision TX500

  1-320-7900 dual 1 GB PCIe x 16 NVIDIA Quadro FX 3800, Quad-Monitor, DVI + 2DP, Dell Precision TX500

  1 341-9040 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-8835 C25, all SAS, RAID 10 hard drives for 4 hard drives, Dell Precision T7500

  1-468-4322 Windows 7 Pro 64-bit Downgrade to XP Pro 64 - bit SP2, media, English, fixed precision

  1 421-1993 Windows 7 Downgrade RLOB

  1 430-3434 PCIe 10/100/1000 NETWORK CARD precision

  1-313-7458 data DVD 16 x - ROM only Dell Precision TX500

  1 421-0536 Cyberlink Power DVD 8.3, with the media, Dell relationship LOB

  1 313-7774 Dell AX210 two piece stereo speakers (black) to the precision of the Optiplex and Latitude

  1 power supply 330-3555 Precision T7500

  1 330-3156 documentation, English, Dell Precision

  1 power cord 330-3157, 125V, 2 M, C13, Dell Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9032 PERC6 / i SAS/SATA hardware RAIDCard - for the connection of InternalHard readers, Dell Precision T7500

  1-330-3571 Resource DVD contains Diagnostics and drivers for Dell Precision T7500

  1 shipping material of 330-3569 for system Dell Precision T7500

  1 410-1862 adobe Acrobat 9.0 English and French, BND, precision Dell OptiPlex and Latitude

  1 420-6712 Microsoft Office Professional for Latitude, OptiPlex, Precision

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  1 341-9042 450 GB 3Gbps SAS, 15 K RPM Hard Drive, 3.5-inch, Dell Precision TX500

  Thanks Swahti. My resolution is to return the manufacturer since it's brand new and make an Exchange.

• Blue Screen of Death, suspected by the my video driver has experienced.

  I need someone to help analyze the dump file and see what is the problem.  I was do BSOD for the last few months because of my video card which has been replaced by the warranty. It was fine until now I've known one another BSOD and don't know if the cause is the same.

  https://SkyDrive.live.com/redir?RESID=2D8CB23E3C1B56F7! 118 & authkey =! AKppy5SJCnx15HM

  Hello

  Do not operate in the Verifier on a regular basis as it may cause instability when it might otherwise
  be wise none. Run it when there are any BSOD issues and you need it as an additional check.

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check was C4 (Driver Verifier) CAUSE nvlddmkm.sys Nvidia video driver.

  BugCheck C4, {91, 2, fffffa800d34d960, 0}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 1b775d)

  nvlddmkm.sys as Nvidia video driver 18/01/2013.

  fffff880 ' 05887000 fffff880' 0632e000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Fri Jan 18 05:22:15 2013 (50F94C87)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums
  on known problems. Update the driver. If there is no newer versions, it may be necessary
  to return to a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ----------

  2. check with Support of Gigabyte, their online documentation and drivers. Update the BIOS, low
  level chipset drivers and the other pilots of major on-board and separate devices. Run DriverView-
  Microsoft drivers hide the value VIEW - update those without drain in their names (see driver update
  methods below).

  BiosVersion = F1
  BiosReleaseDate = 15/04/2011<- check="" for="" updates="" to="" the="" bios,="" low="" level="" chipset="" drivers,="" and="">
  leading edge and separate device drivers.
  SystemManufacturer is Gigabyte Technology Co., Ltd..
  SystemProductName = Z68A-D3-B3
  BaseBoardManufacturer is Gigabyte Technology Co., Ltd..
  BaseBoardProduct = Z68A-D3-B3
  BaseBoardVersion = x.x

  Support for Gigabyte
  http://www.gigabyte.com/support-downloads/technical-support.aspx

  Gigabyte Downloads
  http://www.gigabyte.com/support-Downloads/Download-Center.aspx

  ====================================================

  BCCode: 0xC4 0x000000C4

  Bug Check 0xC4: DRIVER_VERIFIER_DETECTED_VIOLATION<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff560187 (v = VS. 85) .aspx

  BCCode: 0xC4 0x000000C4<-- read="" this="">
  * 1197.html http://www.faultwire.com/solutions-fatal_error/A-Device-Driver-attempting-to-Corrupt-the-System-has-0x000000C4-

  -------------------------------------------------------------------------------------------------

  Vista and Windows 7 updated drivers love then here's how update the most important.

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (video/driver update, BIOS, and)
  chipset drivers)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• MESSAGE-ACCIDENT-STOP IN A BLUE SCREEN ERROR. STOPS & RESTARTS CONTINUALLY. WORKS IN SAFE MODE. POSSIBLE SPYWARE WIN32/INFOAXE?

  the crash, blue screen, stop message-0_c0000005, 0_82627f3f, 0_a542991c, 0_a435f91c, 0_00000000.system stop & restart every time in normal mode.these all started after installing microsoft security essnentials.after that windows updates cannot download-display error message-0_80072efe ABORTED.after CONNECTION NETWORK scanning with windows defender spyware WIN32/infoaxe.remove shows all tool windows defender - succeeded.used tdskiller kaspersky to remove the spyware.after restart the system fails to load showing these in blue screen.previously stop message blue screen appeared on occations, but not constantly. Now is the case each time from windows.only can operate in security mode.give a solution for this.i tried several things start: repair, restoration of the system... etc nothing works.when open in restart mode disabled grubbing watch bluescreen stop message with bios check written above errors.also updates, disablwe memory bios options cache or shadowing.whats the solution for this.i uninstalled already expired anti-virus program norton before installing windows security essentials.pls give me some Tips to solve this problem

  I ran tdss killer - find spyware.to malicious delete everything happened for rebooting.system has crushed display blue screen with error messages.could not started at all in the normal mode.i tried several options but nothing has worked. SOLUTION finally solved this problem by reinstalling windows vista with the original product recovery disc.now it works.all started after downloading windows security essentials.after this windows automatic update stopped working.then I ran tdss killer and system crashed.now I purchased & installed internet security 2011 (kaspersky) .then yes gud. I think that reinstalling windows is the only solution to this message of the death of blue screen.

• iPhone 5 s blue screen of death/stuck in the system restarts. URGENT

  I got my iPhone 5 s for almost 2 years, but I encountered a problem about a month ago, the screen would go blue with parts of the screen will shake off the rust or dark in thin vertical lines and change to yellow and purple. He would do this at random and I read online some solutions for this problem, but none of them worked, I even reset my phone and when I tried to download your backup as it kept crashing until the computer is stuck in the remake, I can't do an itunes backup as it will not now activate. Help, please.

  If the phone turns when it is powered or respond to iTunes when connected, see this document

  https://support.Apple.com/en-us/HT201412

  If you have tried these remedies, you should probably contact Apple using the link at the bottom of this page.

• Blue screen that constantly occur after the release of the Mode standby. (BCCode: f4)

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: f4
  BCP1: 0000000000000003
  BCP2: FFFFFA800C954B30
  BCP3: FFFFFA800C954E10
  BCP4: FFFFF8000319B470
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\WINDOWS\Minidump\021913-32635-01.dmp
  C:\Users\Leonardo\AppData\Local\Temp\WER-59857-0.SysData.XML
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt
  ANY HELP WOULD BE GREATLY APPRECIATED.

  Leonardo

  This phenomenon was linked to a file review (or process) is over.  My feelings are that may have been caused by your Avast.  I would like to do two things

  1. Remove and replace Avast with MSE
  2. run a file system check to check (and repair if nec) operating system
  

  Avast can be a cause of BSOD.

  Please delete and replace by Microsoft Security Essentials at LEAST FOR TESTER

  http://files.avast.com/files/eng/aswclear5.exe
  http://www.Microsoft.com/security_essentials/

  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833

• Blue screen of death occur frequently.

  Hello

  I have been to a lot of BSODS lately and hope someone might help solve the problem.
  Here is the link to the minidump files:
  https://SkyDrive.live.com/?mkt=en-GB#CID=E50B7ED317EFC79B&ID=E50B7ED317EFC79B%21186
  Thank you
  Chantelle

  Hi Chantelle,

  We have two audits of bugs among the DPM attached:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  -----------

  By default, the fault of accidents is NETIO.sys which is network IO subsystem. This is not the real cause of the accident and usually when we associate network crashes like that, it is caused by one of two things:

  1 network drivers themselves must be updated.

  2. 3rd party antivirus or firewall software cause of NETBIOS conflicts.

  CRITICAL_PROCESS_DIED (ef)

  This indicates that a critical system process died.

  -NOM_PROCESSUS: BDSSVC. EXE

  ^^ QuickHeal associated processes.

  ----------------------

  Please remove and replace QuickHeal with built-in Windows Defender from Windows 8, as he was known because of corruption and conflict, just as we see above:

  Remove QuickHeal - http://www.quickheal.com/prod-rem

  Windows Defender (activate after removing QuickHeal) - http://www.eightforums.com/tutorials/21962-windows-defender-turn-off-windows-8-a.html

  Kind regards

  Patrick

• Firefox crashes. It crashes even when I open the Profile Manager and safe mode

  Hello
  Tomorrow, I tried to update my firmware on my phone. So I installed a samsung app, called "Samsung Kies" after installing this app my firefox suddenly had crashed.

  I'm a Mac user using OS X 10.8 and firefox 18.

  And when I read the article on firefox to crash, I found that new profile will help me but unfortunately also not helped me. When I tried to open the profile manager he got too crushed. now, every time when I opened firefox it crashes after 2-5 seconds...

  And this is my last report of crash... found in (lib/application support/firefox/crash report / submitted)
  Crash ID: bp-5dd48a7c-2622-4a28-aa0e-92de12130111

  Help me please
  Thanks in advance.

  This could be a police problem.

  You can write a check for corrupted fonts and duplicate and other police issues:

  • http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  • http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• blue screen of death and no. INTERNET!

  armel seconds to turn on my computer, it goes to the blue screen of death (IRQ_LESS_THAN_OR_EQUAL). When I load in safe mode, I have no internet access and can not look for solutions or try to solve any problems... Help, please!

  Oh and a Vista.

  In addition to the suggestion of auggy you can try the following methods.

  Hello

  You did changes to the computer before the show?

  Method 1: If the problem does not occur in safe mode then put the computer to boot and check which third-party driver is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps from the link to fix the problem:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 3: You can also view the following link to resolve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: steps also apply to Windows Vista.

• Di Shutdown does not work, got the blue screen, beware, if it's the 1st time, etc., bios .updated .shutdown worked for awhlie, then got the same blue screen on another attempt to stop

  I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.

  Hello

  What is the exact error message on blue screen?

  This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.

  Check if the problem persists in safe mode and after the same return.