Blue screen to develop the module Lightroom CC

Similar Questions

• Blue screen to develop the module Lightroom 6.3

  I use Windows 10. I Lightrooms 6.3 installed and when I go into the mode of developing the screen turns blue with no image list.. How can I fix this?

  Hi Veronica,

  You must go to the Edit menu > Preferences in Lightroom > Performance > uncheck 'use graphics processor' and restart Lightroom, and check again.

• Blue screen to develop the module.

  When I type develop it, the intermediate zone is blue with an X in the middle.  I don't know how to remove that for my pic is full screen?  Thanks for your help.

  Hi Debbyo,

  Please go to Preferences > performance > uncheck "use graphics processor.

  Restart Lightroom and make you to Lightroom update to the latest version 2015.6.1/6.6.1.

  Concerning

  Tanuj

• Blue screen to develop the Module, LR6

  New to Lightroom.  In collaboration with 6.  I've seen this question already posted, but have not seen a final resolution to the question so thought I would throw it again.  When I she draws to develop, I see my image in the upper left corner, but where would the larger image is just a blue box.  The "fix" which was recommended is to disable the GPU under preferences, Performance.  This is not a good long-term solution.  Any other idea?

  You can try updating the graphics driver, maybe this will allow you to work with the gpu market.

  If it isn't, it's no big deal - it works that develop and unless you have 4 or 5 K monitor, it will not affect performance.

  In fact, for many users, performance will be better with the gpu is off.

• just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  just upgraded to Windows 10. My lightroom (point 6.1.1) no longer respond (hangs) when I pass it draws to develop the module.

  (I also update to the latest version of LR)

  Reach:

  Edit > preferences > Performance

  Disable the GPU acceleration.

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-GPU-FAQ.html

• I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Impossible to locate one I bought on the site to download aga

  I have lightroom 5 bought the downloadable version on the adobe site. months he did the demo version of cc that it has expired. now on lightroom, it says that my develop the module is disabled. Cannot locate the one that I bought on the site to download again because they changed the adobe site drastically.

  https://forums.Adobe.com/search.jspa?q=%22develop+module+is+disabled%22&place=%2Fplaces%2f 1383621 & depth = ALL

• Black image to develop the module during the use of acceleration GPU on Macbook Pro

  Since the update of Lightroom 6.6, I was see the "bug of the black image" to develop the module still very frequently.

  Basically, 1/3 of my photos appear black when you view in the develop module.

  If I select 'View', 'Before', the original is displayed correctly, when switching to "After" it becomes black. Even in mode split the side "Before" picture, the side is 'After' is black.

  If I play with some settings and select 'Auto' the image appears correctly again.

  If I disable GPU acceleration, then all images are displayed correctly, but I would use the GPU acceleration.

  Any ideas how to fix?

  Is there some sort of connection that I could activate that help you solve the bug?

  Lightroom version: 6.6 [1078672]

  License: Perpetual

  Operating system: Mac OS 10

  Version: 10.11 [4]

  Application architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.5 GHz

  Built-in memory: 16 384.0 MB

  Graphic processor News:

  AMD Radeon R9 M370X OpenGL engine

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 4.1 ATI - 1.42.6

  Renderer: AMD Radeon R9 M370X OpenGL engine

  LanguageVersion: 4.10

  The issue will be probably set with 6.6.1 or 6.7 - when - knows only Adobe.

  Until then your solution is to disable the GPU acceleration or roll back to 6.5.1. Are you using a 4 k or more display? If this isn't the case, I guess you don't see no gain in performance in any case, don't you?

  Here's how: How do I roll back to Lightroom 2015.1.1 or Lightroom 6.1.1? Lightroom Queen

  Just replace 6.1.1 by 6.5.1.

• I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason, it

  I just got a chat session with unnecessary failure to load Adobe. I bought LR6 in September. He worked for a while. Now my develop the module is disabled and it says that I have to put the licensed software. I have my number series but for some reason any it not reactivate my software. I downloaded the software directly from Adobe. I paid for the license from Adobe. I have a serial number adobe, but nothing works.

  Hi iamangryatlightroom,

  Please refer to the related discussion and follow the steps to solve the problem.

  Reference: Lightroom 5.5 'Module Development disabled, please renew your membership'

  Let us know if that helps.

  Kind regards

  Mohit

• during the passage of the library to develop the module I get no answer

  When I switch from a library module and to develop the module I get develop does not

  If you use Lightroom CC 2015 or Lightroom 6, go to your Lightroom preferences, the performance tab and uncheck the option of GPU. See if that makes a difference.

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• How can I re - boot my laptop windows xp from a blue screen I get the message of UNMOUNTABLE BOOT VOLUME

  I recently got a blue screen that appears on my computer windows xp laptop which has a message of UNMOUNTABLE BOOT VOLUME and I was wondering how I can re - start the laptop to return to normality for the use that I'll have to use my windows 7 but I need to use my windows xp for various General things and would like to have help on how can I get rid of this? whenever I'm using one of safe mode, it does not access this section is

  Kind regards

  Julie stearn

  Hello

  1 how long have you been faced with this problem?
  2 have you made changes on the computer before this problem?
  3. What is the exact error message on blue screen?

  The following article might be useful: Unmountable Boot Volume

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm