Blue screen when you try to use iTunes "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
Original title: blue screen of death while using iTunes
Hello. I get a blue screen of death while using iTunes. Whenever I try to sync my iPod with iTunes, after a few minutes, I get a blue screen of death. The blue screen says something like this:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0x00000002, 0x00000000, 0xC4A00000, 0x80710CCB
Kawgha, sys address 80710CCB base at 8070. 000
Is there a solution to this? Thank you.
Follow these sites
http://www.PCSTATS.com/ArticleView.cfm?articleid=1647
http://www.professorshouse.com/living/technology/computers/articles/blue-screen-of-death---how-do-I-fix-it/
http://support.Microsoft.com/kb/958233
Tags: Windows
Similar Questions
-
I ve had blue screen when you try to use photoshop to the bridge.
I have can´t open a file (regardless of format) bridge, Photoshop, as I used to.
I get error of kennel, in the blue screen. I use Windows 8 and Photoshop CC 2015.
Can someone help me?
TKS. Seem likely be solved with 10 Windows Update.
-
LifeCam is at the origin of the problems of "Blue screen" when you try to close?
I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?
Hello
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.
We're here to help and guide you in the right direction.
I suggest you to consult the help article and check if it helps.
Method 1
I suggest you update drivers lifecam and check if this may help,
Updated a hardware driver that is not working properly
Update drivers: recommended links
Method 2
Visit the link mentioned for more information below.
Resolve stop (blue screen) error in Windows 7
Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.
It will be useful.
Let us know if you encounter problems under Windows in the future. We will be happy to help you.
-
Satellite C650 - blue screen when you try to install XP
Hey,.
For a kind of werid reason my disappeard just win 7 and now I try to install Xp.
And suddenly, when the facility is good on start, I get blue screen.
-Does anyone know why I get the blue screen and a possible solution to this problem.
PS: The XP cd is not bought at Toshiba
Can you please tell us which drive do you use? Is it perhaps original disc of Microsoft?
Service pack?
What is defined in the Advanced BIOS for compatibility, AHCI or SATA option?Give us more information please?
The exact model name and model number can also be useful. -
Intelppm.sys of error blue screen when you try to generate a custom.wim with WDS
I have 20 Toshiba Portege R700 and when I try to generate a wim file personalized with all my apps, the system crash and a screen beautiful blue appears with the error in intelppm.sys. The image capture starts but never stops and crashes not always at the same size. The BIOS and drivers are up to date. Can someone help me?
Hello
What is the file wim and what program you use to create this file?
Do do you this on the version preinstalled Windows from Toshiba?
-
Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has
Hello
When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?
Hello
Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.
However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.
Check it out!
-
Blue screen when you try to open the game
I just finished a new installation of the operating system after formatting the discs. I kept my secondary drive deleted until I had installed everything I wanted to be installed on the primary SSD. I used disk management to recognize the secondary drive then remember there was still one thing to install on the p [primary drive. I deleted the secondary image drive installed again, what I had, and the secondary drive active re. When I re enabled, disk management recognized secondary drive 0 and main (C) drive as disc 1. I get the Blue error screen at the opening of the games. Any help is appreciated.
I have more the problem of disk 1/0, as a fixed. I got another blue screen but after trying to uninstall and reinstall the sound drivers to correct a cracking noise that's happened with the startup sound.
The computer tells me that I don't have permission to share the dmp.
My laptop is a Clevo P150SM
CPU: Intel Core i7 4700MQ
GPU: AMD Radeon HD M 8970 4GB
16 GB OF RAM
SSD is the C drive and HARD disk is the disk storage and programs.
DriverView and information system has been downloaded as requested.
-
Re: Windows Update KB kb961371 causes blue screen when you try to connect with BT
Just thought I'd share what he had me flumoxed for awhile.
I found that Windows Update has published around July 16, 2009 cause BT crash and Wlindows to go back to a blue screen.
KB961371 is installed automatically by Windows Update If you have set it to do.
Unistalling it end the Bluescreens.
BT Stack Version 6.40.00 (T)
Windows Vista, but can affect other operating systems
Update details
http://support.Microsoft.com/kb/961371
Ian
Hey Ian, thanks a lot for this info.
I'll test it on my machine. -
I got a blue screen when you try to re - install Windows 7.
All started 3 days ago. I was using just my PC regularly, then I get a BSOD. Whenever I tried to reboot, I get a BSOD after about a minute after loading screen. The BSOD was rdyboost.sys I did a system restore using the windows via memory stick installation. Things were great, that 10 minutes later, I start getting BSOD, once again and each time after that screen as before loading. I tried to reinstall windows, but I have a BSOD at 30% to each hour. My motherboard is ASRock extreme 3 gen z68 3. Is there something wrong with the motherboard in this case? It seems to be a hardware problem, now, I guess. the BSOD now varies from as "changing the code of the system or a critical data structure has been detected" to "ntfs.sys" or * STOP: #.
I took pictures of the BSOD, but there is no option to transfer to this post. I am trying to install windows 7 pro 64-bit, which was originally about it.
~ I need help fast. Thank you. I'm willing to do whatever it is necessary. Should I try to install windows xp and see if I have some luck?
Solved the problem myself. I did memtest on individual RAM, a strip of RAM was defective. Thanks for the help.
-
I get a blue screen when you try to install XP Pro: Stop: 0x0000007B
I'm doing a new installation of my CD XP pro (SP2) on a sata drive.
My bios works with AHCI so I have the drivers on a floppy and press F6 when the installation starts. Finally, the screen shows it starts Windows but crashes with:
A problem has been detected...
The rest of her talking about the virus check screen, remove newly installed hard drive, check the errors with chkdsk and so on and gives the following Stop error message.
Stop: 0x0000007B (0xf78D2524, 0xC0000034, 0x00000000, 0x00000000I checked the hard drive with a test of surface (past) deleted and reinstalled the partition and formatted NTFS.
I have the disk sata hard connected to a sata 6 gb in the motherboard connectors, while the sata drive is an old one that is probably at the low speed of sata. Who would have something to do with it?Any ideas?
Here's what I found for the 6 series chipset: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3273&DwnldID=20710&ProductFamily=Desktop+Boards&ProductLine=Intel%C2%AE+6+Series+Chipset+Boards&ProductProduct=Intel%C2%AE+Desktop+Board+DP67BG&lang=eng
-
Blue screen when you try to install Windows XP on Intel ThinkPad Edge 520
Hello
I have a ThinkPad Edge 520 type 1143-B5G with a clean disk and I need to install Windows XP on it, for reasons of inheritance. I read on the pilot of the technology Intel Rapid store being necessary, but this seems not to apply to the 520, only to 220 and 420. The recommended settings are not available on the 520 (nor is the driver itself), and the driver is listed by n/a for the 520 in the list of drivers of Lenovo. But, I always get a BSOD error just as Windows is starting from the installation DVD, after the DVD instructed all pilots, he can think about.
Anyone know how to fix this?
Would BTW - be possible to install XP in a separate partition, main alongside Windows 7, on a drive that already has Windows 7 on it? Or a clean disk is needed for this?
Kind regards
/ EvA
Hello and welcome,
What settings are you looking for? It seems that there is a problem with the mode of operation of HD. The E520 BIOS has an option to change the SATA compatibility instead of AHCI mode? You will not be able to install a version of "Vanilla" of XP without adding the correct AHCI driver or compatibility mode.
What version of BIOS do you have? I see this rather cryptic reference in the BIOS 1.20:
"[Fixes problem] problem reading/writing data to the SATA compatibility mode."
It is possible to dual-boot XP and 7, but the best way to do is to install XP first and then let the 7 Installer put in place the configuration dual-boot. You would still have the problem of compatibility (IDE) vs AHCI mode.
Ah, lookinng a little further, there is a driver AHCI for XP in Lenovo driver matrix. The readme file includes instructions on installation.
Intel SATA controller AHCI Driver for Windows
Readme for Intel SATA controller AHCI Driver for Windows
Maybe you get.
Z.
-
Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?
Hello
Do a restore of the system using the same safe as you would in Normal Mode.
http://bertk.MVPs.org/html/restoresysv.html
http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php
See you soon.
-
blue screen when I try to develop my raw photos
I downloaded the trial of lightroom version, and my raw photos look like blue screen when I try to develop. I can view them in the library, but not develop... I assume this has something to do with camera raw, but I have no idea how to solve. If anyone can help?
I'll tell you the information that I found on the web:
-In the list of supported cameras, it says I need - like version minimum - 5.4 of Camera Raw plugin and at least 2.4 version of lightroom.
- And system information that appears in the trial version of lightroom is:
Version of Lightroom: CC 2015.4 [1060496]
License: Trial
Operating system: Windows 10
Version: 10.0
Application architecture: x 64
System architecture: x 64
Number of logical CPUs: 4
Processor speed: 2.5 GHz
Built-in memory: 8097,1 MB
Real memory for Lightroom: 8097,1 MB
Real memory used by Lightroom: 658,2 MB (8.1%)
Virtual memory used by Lightroom: 2411,3 MB
Memory cache size: 3.5 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2, AVX, AVX2
System DPI setting: 144 DPI (high DPI mode)
Composition of the Bureau enabled: Yes
Exhibition: 1) 1920 x 1080
Entry types: Multitouch: Yes, built-in touchscreen: Yes, built-in pen: Yes, touch external: no, external pen: no keyboard: Yes
Graphic processor News:
Intel(r) HD Graphics 520
Check the supported OpenGL: past
Vendor: Intel
Version: 3.3.0 - Build 10.18.15.4279
Renderer: Intel(r) HD Graphics 520
LanguageVersion: 3.30 - Build 10.18.15.4279
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Library path: C:\Users\Celina\Pictures\Lightroom\Lightroom Catalog.lrcat
Settings folder: C:\Users\Celina\AppData\Roaming\Adobe\Lightroom
Plugins installed:
(1) home canon Plugin
(2) Facebook
(3) Flickr
(4) attachment Plugin Leica
(5) attachment Plugin Nikon
Config.LUA flags: None
Map #1: Vendor: 8086
Feature: 1916
Subsystem: 804e103c
Revision: 7
Video memory: 128
Map #2: Seller: 1414
Device: 8 c
Subsystem: 0
Revision: 0
Video memory: 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Conexant HD SmartAudio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x102
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: true
In Lightroom, try Edit > Preferences. On the performance tab, uncheck the box use Graphics Processor.
-
Get the blue screen when you create a new message or the response message in OWA Exchange 2007
Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/
It will be useful.
-
Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz
Hi, I was wondering if I need different software or? Tent for upgrade achieve performance more than one old computer. When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added. 3.6 GHz was also used in the 650's. Just by looking at the cpu they look the same to me. Any ideas is better than what I have now. Dell number is 4QXB451
This isn't the site for these answers... Try intel.com/support/cpu
Youre pc requirments are based on the chipset boards, chips intel only run with
the default CPU.
Maybe you are looking for
-
I use firefox (37.0.1). Since last week, I am unable to play any kind of videos youtube esp. NO change in system or the installation has been made. Please help me
-
HP 15-5011TX omen: menu of startup HP Omen at startup
I recently had a battery problem with my laptop, now fixed, but in the process of starting the menu options to access a few times, it now displays whenever the PC starts. The menu tell you is he who says: Start menu F1 system information The F2 Syst
-
Hi all I recently bought a laptop from Toshiba Satellite M50-142. The reason why I bought it must be mobile, laptop didn't need a lot of space and is silent. I was a little scared because my Satellite is stronger than I expected. The fans to run ever
-
LaserJet P2055d: LaserJet P2055d two-sided printing problems
I have a new computer with Windows 10. I have connected my LaserJet P2055d and recognized Windows and the driver PLC6. I don't have the ability to print double-sided, like I did when I was with this printer with a computer running Windows 7. Any a
-
Automatic duplex does not work on Vista 64 w/6988dt
I was using a HP 6988dt for awhile of many computers XP and it works very well - I like the auto-recto-sided unit. I've upgraded a computer for Vista 64, installed software Vista 64 and printing works fine, except that the choice "use auto duplex" ta