Blue screen with the installation of new windows on that already pre-installed

Similar Questions

• Blue screen during the installation of windows

  I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

  Hi AhmadDimassi,

  ·         What is the error it fails with?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Check drive for errors.

  Description of the Windows XP Recovery Console for advanced users

  Microsoft Windows XP - Chkdsk

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

  Original title: blue screen

  Hello

  I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text
  error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).
  I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.
  can someone help me?
  Laptop is a toshiba L20-153
  Thanks Joakim

  Hello

  These error messages may be due to hardware problem.

  The methods of troubleshooting provided in the below article might help you.
  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7

  Mr President.

  HP Deskjet 3325 color inkjet printer not to proceed with the installation of premium window 7 installed hp laptop hp pavilion dv4. Please send me the solution to my email address * address email is removed from the privacy *.
  With respect,
  Tonia CENIA

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796821&CC=UK&DLC=en&LC=en&os=4062&Product=82029&sw_lang=

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

  Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly understand exactly what happened when you tried this update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Gateway Windows 7: stop blue screen during the installation of Windows 7: 0 x 00000024

  OK, I've had so many problems with this computer and I would love to have the support of the community.
  I have a Gateway desktop that is labeled for Windows vista. I had already installed Windows but a virus brought me to uninstall. I don't have the disc, but I have a flash drive with windows 7 on it. So I have my computer to run the player flash start run the windows setup program. I get to the part after the selection of my hard drive. It comes down to 50-60% full, and then it stops at a blue screen with stop code error 0 x 00000024 (0x0000000000190FB 0XFFFFF88003B8C269 0XFFFFF88003BAC0 0XFFFFF8000D292FOD) I have searched and searched for a solution but none to my knowledge, I am only 16 and very bad so I can not affored a new computer, or a repair of $75. Please when replying to this is so simple and stright forward. Thanks a lot for taking time outta your day to help me.

  Pearen

  These were related to the Extensible Atheros athr.sys wireless device driver. I would re - install newer and updated the drivers listed below and updated to update to Service Pack 1
  

  Run (SURT) system update readiness tool and then update to Service Pack 1

  32 bit
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
  64 bit
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858

  Now updated for Service Pack 1
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Older drivers who need to update your driver of athr.sys which is 3 years old inclusive
  SCDEmu.SYS Mon Jul 7 03:40:49 2008 (4871-881)
  PowerISO Virtual Drive driver
  http://www.carrona.org/drivers/driver.php?id=SCDEmu.sys
   
  VSTCNXT3. SYS Wed 15 Oct 20:29:13 2008 (48F68AD9)
  Conexant SoftK56 Modem driver
  http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.sys
   
  VSTAZL3. SYS Wed 15 Oct 20:30:03 2008 (48F68B0B)
  Conexant SoftK56 modem
  http://www.carrona.org/drivers/driver.php?id=VSTAZL3.sys
   
  VSTDPV3. SYS Wed 15 Oct 20:32:04 2008 (48F68B84)
  Conexant SoftK56 Modem driver
  http://www.carrona.org/drivers/driver.php?id=VSTDPV3.sys
   
  Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16)
  Realtek NETWORK card
  http://www.carrona.org/drivers/driver.php?id=Rt86win7.sys
   
  amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
  AMD - usually from the Windows 7 DVD storage controller driver
  http://www.carrona.org/drivers/driver.php?id=amdxata.sys
   
  ATHR.sys kills Jun 9 14:04:52 2009 (4A2EA444)
  Atheros Extensible Wireless LAN driver for network card CB42/CB43/MB42/MB43-D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev.) (B) discontinued 2008
  http://www.carrona.org/drivers/driver.php?id=ATHR.sys

  Run (SURT) system update readiness tool and then update to Service Pack 1

  32 bit
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
  64 bit
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858

  Now updated for Service Pack 1

  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  BugCheck D1, {30, 2, 0, 902658a 5}
  Probably caused by: athr.sys (athr + 428a 5)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BugCheck D1, {30, 2, 0, 918618a 5}
  Probably caused by: athr.sys (athr + 428a 5)
  ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
  BugCheck D1, {30, 2, 0, 94c448a5}
  Probably caused by: athr.sys (athr + 428a 5)

• Qosmio G35-AV600: blue screen during the installation of Vista?

  Hello

  I have a G35-AV600 one I am trying to install windows vista.
  I followed all the instructions for the driver raid and all with pure install.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  I know that some people had the same problem since they were posted here but no solutions have been posted.
  Please if you have an idea how to solve this problem, help me, I'm desperate.

  Thank you.

  Hello

  We need more information to try to help you.

  As a first step:
  Have you upgraded your Qosmio G35 to be a Vista capable?

  BIOS available for download from the Toshiba Web Site:

  Version 3.30 25/01/2007
  Changed the BIOS to be compatible with Windows Vista.
  Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
  Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
  FIX: A smart card containing a TI controller is always set to disabled.
  Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
  Fixed: Ensure a remote to work Express Media Player.
  Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
  Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
  It is the first version of BIOS for PQG33U models.
  This BIOS supports Windows Vista and XP.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  Would you please, let us know what is the error message when you have a blue screen?
  Report any information given at the bottom of the blue screen.

  Francisco