(Blue screen with the text flashes then quickly restarts computer)

Similar Questions

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

  Original title: blue screen

  Hello

  I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text
  error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).
  I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.
  can someone help me?
  Laptop is a toshiba L20-153
  Thanks Joakim

  Hello

  These error messages may be due to hardware problem.

  The methods of troubleshooting provided in the below article might help you.
  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

• Blue screen with the error "irql_not_less_or_equal"

  I have a problem I can not correct and hoped someone could help me fix.

  I got a blue screen while I was working on my laptop. I restarted windows and once connected, the office appeared and everything seemed ok, but before I could do anything that I got another blue screen with the error "irql_not_less_or_equal" So now, I have only access in safe mode.

  I tried to restore the system to a previous point, but the same error occurred during windows startup.

  Then I made a backup of my files and tried to use the disk to reboot, but again, I got a blue screen (I don't remember the excact error) after the first loading bar, so noting changed.

  Then I looked at the log files and found that, just before the first crash, an adobe update has been installed. I removed adobe list startup failed, completely remove the adobe doesn't either.

  Also, in safe mode I don't have an internet connection (without wire or cable). Blue screen errors is not always the same, esspesially codes "stop".

  My knowledge of windows is very bad, so I just tried things people recommended on internet. If someone could help me would be great. I deleted all my important files from my laptop so I don't mind lossing just as long as windows functiones correctly again.

  Thank you

  King

  Sorry, but there are way too many mistakes even describe.  You have about 5000 errors of Avast.  I would like to delete it

  

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• Computer has been slow to start, Blue Screen of Death appears and then it restarts.

  Original title: Restart the computer

  Hello

  My old Compaq desktop computer has been slow to start in the morning and recently when I went to turn it on, it got stuck on the boot sequence, and it restarts just after the initial start-up. He never Windows logo or the login screen. I tried to use recovery disks of Lenovo's laptop of my husband as an attempt to get something to work on, but nothing helps, my computer continues to restart loop way. My daughter has tried to do something with the BIOS setting, which did not affect the issue. Rather than restart suddenly, the blue screen of death appears and then it restarts.

  Any help?

  Hello

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD (sale at retail or OEM integrators), which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Black screen with the underscore flashing in the upper right corner - HELP!

  Prouct name - laptop HP 2000-299WM

  Product number - QE282UA #ABA

  Operating system-Windows 7, 64 bit.

  No error message.

  No recent changes before the problem occurred.

  -For starting, my laptop goes to the screen with the logo blue HP and then straight to a black screen with an underscore flashing in the upper right corner. I tried to restore it to its factory settings and other things, but nothing did! Ive been wondering if I should try what I saw worked for another customer here - http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Black-screen-with-blinking-cursor-HELP/t....

  Help!

  Hello

  Try typing the esc key when you start the laptop to see if it launches the Start Menu - if this is the case, use the arrow keys to select the Boot Menu, click on enter and then use the arrow keys to select the CD/DVD drive and press ENTER again.

  Kind regards

  DP - K

• MacBook Pro screen displays a blue screen with the vertical line

  Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

  It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

  Ciao.

• Blue screen with the error code and I have no disk recovery for HP Pavilion dv6-1260se

  I have a HP Pavilion dv6-1260se with operating system Vista factory installed. When you start the computer, I get a blue screen with this error message: STOP: c000021a {fatal system error}.

  The verification of a KnownDLL failed.  process ended unexpectedly with system

  a status of 0 x 0000221 (0x007fb9c0 0x00000000).

  The system has been shut down.

  I don't have a recovery disc for this computer.  I tried to order them, but they seem to not be available.  It is my daughter's computer.  She said she started having problems after you download Frost Wire (music sharing), and then she took.  We tried to go back to a bygone era and that did not help and then the blue screen with error message appeared. What should I do now?

  Hi Yprlvr

  It is not possible to download records from the web site, but you can order and they will send you the discs for you.  If you can get another option using F11 to work and get the restored system this way, you can make your own recovery disks (assuming that you have not already done on this PC, what a game can be made by PC).

  R

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Blocking of blue screen with the analog voltage (WinXP, PCI-6251)

  Hello

  I'm looking to solve a problem of blue screen with my measure blocking
  application, which I am developing with C++. Blocking seems manifest
  a little random after a variable amount (500-50 000) of voltage analog
  measures. My application needs to make a huge amount of these digitally
  trigger voltage measures after a certain period of time, and I'm using a
  unique
  task to do. The task is stopped and started after a single measure
  is
  which is done around 10 000 - 100 000 times per second. For this
  because I do synchronized with the PCI-6251 map data acquisition and
  one
  Ztec oscilloscope card. It seems that the probability of blocking could be
  associated with
  the frequency of measurements of voltage that I perform.

  The
  the app itself is multithreaded, but I'm blocking concurrent access
  TO
  the card with lock - all access to the card are behind a single mutex

  lock, so simultaneous access is blocked. In any case, all data acquisition
  access
  o the map is initially a single thread, which is dedicated to the acquisition of data
  operations.

  I also did stress tests with Ztec scope map, which does not
  result
  in all the problems. I also disabled in order of acquisition of Ztec map data
  TO
  Make sure that it wasn't the card scope, the origin of the problems - the problem
  persistent, so this seems to point towards the direction of the nidaq map.

  The deadlock appeared when I used the original supplied with drivers
  the
  card. I installed the latest drivers (removed the device from)
  ' Windows
  Device Manager and your application Measurement & Automation, reinstalled), but the blue screen still appears.

  Blue screen gives me a few debug data, but it does not mention any

  files .dll or something that would be of course point to a specific file (driver). I enclose at least partially matching code snippets.

  Hello again! I've been in contact with a local support person, who suggested that I have use DAQmx_Val_FiniteSamps instead of DAQmx_Val_HWTimedSinglePoint. I don't have any other changes, but this (see below) and the problem disappeared, so this seems to be an acceptable solution, because I don't see at all why not do this way. (Thanks Henry!)

  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_HWTimedSinglePoint, 1));
  DAQmxErrChk (DAQmxCfgSampClkTiming (task_reader, NULL, 100000.0, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, 2));

• HP Pavilion 500-330 Desktop PC blue screen with the cursor after the start

  I have a desktop computer Pavilion 500-330 Windows 8.1 running on a 64-bit system. The problem is after the start, a blue screen with a cursor appears, and the computer does not go to the lock screen.  I did restore, get updates and even left the only blue screen, but after many hours, he was always there.  If I do a force re-booting, the lock screen comes, but not always immediately.  There is no problem to wake up when it is in "standby".

  Any help will be appreciated.

  Hello again @padway,

  Actually, if you already did a cover of the plant on your computer the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As a recovery plant excludes any kind of software problem this is your best course at this time. A technician from the local computer or a computer repair shop may be an option if you are not in the warranty as well.

  I want to thank you for display on the HP Forums. Have a great day!

• Computer hung over the Windows, restarted, update now it does not start even with the installation CD, Get blue screen with the stop message.

  Hi, I installed a Windows update when my computer froze, so I turned it off and back on, now I can't even boot to the installtion disk supplied with the computer. When I hit F8 reapeatedly and select one of the available options, the computer contiually restarts and will not even go into safe mode. I tried hitting ctrl-alt-del, which brings me just for the system configuration menu. I even tried a software that is supposed to start any computer with any problem, and I get the same results I get with the installation CD. (Blue screen with error message: STOP 0x0000c1F5 (0x00000000, four times).) I can't do anything with it, can you help me!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly understand exactly what happened when you tried this update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner