Bluescreen error CODE BCD: 24 error in XP
HelloW,
My pc is a recording facility studio connected to the motu 896 mk3 firewire via a firewire pci pc converter.
What is your motherboard brand and model? What is your processor i7 from Intel to the exact address?
How long have you been running this combination of motherboard, processor and operating system beforeyou began to see this problerm?
Is the problem occurring during the boot process or a later version?
Bug check code:
http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx
You have data files, that you need to recover? Only after saving your data files, you can try running chkdsk. Doing before you back up your data you may lose all data on the hard drive.
Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.
Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.
If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.
However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.
Tags: Windows
Similar Questions
-
I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution
Hello
It would be better if you provide the exact error message, but you can try the following procedure:
Kind regards
Mohammed Mukram
-
I get a bluescreen error 1-3 times per week for 2 months.
* Original title: Bluescreen Error
I get an error bluescreen 1-3 times per week for 2 months, usually indicating that the computer is being closed to protect the computer against damage. The latest incident took place on 04/01/2016. I ran all the diagnostic tools I could find, including a group called UBCD, but received no notification of an error. A possible anomaly occurred when I was running a test of memory associated with my NVIDIA GeForce 960 GTX graphics card: the test is run rather quick end to a reboot. Device Manager, however, said that the adapter is running correctly.
I hope you can help me. I have a lot of work to do, particularly on the graphics this computer has been configured to manage.
Jan 4 incident occurred when I was loading a new program to run a telescope I received for Christmas. The program has been Starry Night Orion special edition 6 I read your directions for collecting files, grouped in a rar file and placed in a file on my drive one. The link to the file is: https://onedrive.live.com/redir?resid=A3029F8020206937! 424 & authkey =! AHQicx22LzO-XM4 & ithint = the file % 2crar.
Please let me know if I messed anything up.
Thanks muchly,.
Robert
These accidents were related to the corruption of memory (probably caused by a driver).If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here) -
Dear all,
I run Windows XP it SP 3 off vmWare Fusion on my MacBook Pro, w. 2.6 GHz (v. 1.1.1) and a 17 "display.
Currently, I am experiencing bluescreen errors about 75% of the time I start up Windows on my virtual machine. These errors started happening when I uninstalled a software on the virtual machine Windows Live, but come to increase in frequency to the extent where my use of the Fusion has become seriously affected.
Is it possible to change this anomaly?
In addition and it's less important if there is a solution to this problem, I would really like to know, Windows does not recognize the existence of my iSight Camera, and there is no software in XP or the Microsoft Website which is able to manage this camera. Where can I find software for Windows that would operate the iSight?
Thanks a lot for any help to unravel these problems!
Steve
Hello Steve,.
I run Windows XP it SP 3 off vmWare Fusion on my MacBook Pro, w. 2.6 GHz (v. 1.1.1) and a 17 "display.
just a note, the latest version of series 1.1.x 1.1.3 you should consider the upgrade (no new features, some bug fixes).
Currently, I am experiencing bluescreen errors about 75% of the time I start up Windows on my virtual machine. These errors started happening when I uninstalled a software on the virtual machine Windows Live, but come to increase in frequency to the extent where my use of the Fusion has become seriously affected.
Is it possible to change this anomaly?
Well, you will need to provide more accurate information about yourself and this forum. Go to control panel > system > advanced > startup and Recovery > settings, uncheck 'Automatically restart' and select 'partial memory image' in the popup button "Write debugging information" section below.
Then the blue screen is displayed, and you can take a screenshot of it (for example with the utility Grab in OS X - Grab in Spotlight search, run it, and then in the menu bar, Capture > window, then select the merge window with the blue screen). In addition, a dump file will create in your C:\Windows\Minidump folder. Attach the screenshot and the dump file to post in this thread as well. Also, try to search these forums for some representative text (usually written in capital letters) of the blue screen, you may be able to find a solution.
In addition and it's less important if there is a solution to this problem, I would really like to know, Windows does not recognize the existence of my iSight Camera, and there is no software in XP or the Microsoft Website which is able to manage this camera. Where can I find software for Windows that would operate the iSight?
Install Boot Camp on Leopard DVD drivers inside the virtual machine WIndows, if you haven't done it yet - the drivers of Boot Camp contain Windows driver for the iSight webcam, you need. Restart Windows and the Virtual Machine > USB > Connect Apple built-in iSight. Then try to use it with a program, or you should see along your virtual hard drive and right click computer and test it (don't know how it is expressed exactly, hope that you will be able to understand).
Boris
-
TouchSmart 15-4010nr is no LONGER to START - Code BCD error 0xc0000034
Cannot start Windows 8. I get the BCD 0xc0000034 on a blue screen error code. System Restore does not restore, and I also tried an auto repair in the limited options given to me, nothing helps.
Recently I had turned off the dynamic scale in an elevated command prompt, and then a few days later I turned on "use platform clock" as well. However, since doing so either or both, I was able to turn on/off the laptop without a hitch.
I guess me to play with the BCD settings had something to do with it. For the record, I turn me off checking dynamics in order to reduce the latency DPC in Windows 8. As a DJ, latency spikes are unacceptable and I read this as a solution.
Any ideas?
Solved - for the record - follow the instructions given in this link:
http://pcsupport.about.com/od/fixtheproblem/HT/rebuild-BCD-store-Windows.htm
-
I get a bluescreen error code 1001 reads fault bucket-1514598552
Original title: I get a blue screen. Overview of event code 1001 bed fault bucket 1514598552. I already disable all third-party software, so it's not the source of the problem.
I don't know if that helps, but the name of the game is Skyrim. I've already put all the settings down as low as possible for my PC. I am running Windows xp Pro. x 64 edition. I followed all the instructions that I had on the error report to stop the blue screen issue. What could someone tell me is very appreciated. I have a video card GeForce GTX 260 Invidia (driver version) 285.58 and an Intel Core 2 Quad 1333 FSB.
It can help to look at the files minidump against accidents with a debugger.
Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?
The following link has information about the use of Windows Live SkyDrive:
If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop
In addition, you do not necessarily have compress the minidump files, you can download one at a time.
-
Bluescreen error Code: 0Xc000007b during the installation of windows
I am trying to install windows 8 in my new laptop Alienware. Everything seems to work fine until the installation check devices! He said that the process ran into an error of driver stack buffer overrun. The blue screen comes up saying"The operating system could not be loaded because the critical system driver is missing or contains errors.File:\WINDWS\system32\DRIVERS\stcfltn.sysError code: 0Xc000007bYou will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your administrator system or PC manufactrer. »I don't know how to solve this problem. I have tried this 3 times, ran into the same error of all time.Any help to resolve the issue would be greatly appreciated.Thanks in advanceThanks a lot for all the help people.
I finally solved the problem after hours of reading the forums online.I just had to install the drivers using the option "Run as Administrator" and that did the trick.Thank you again\Adel -
All of a sudden my computer will not start and I tried to reinstall/repair the operating system.
When you try to install the OS, when booting from the CD and before asking questions of formatting, it displays a blue screen. sayng 'Search for viruses on your computer' and finally 0x0000007B, etc...
Thanks in advance
If you use hard drives SATA and AHCI is enabled in the BIOS, you will need to press F6 and add SATA drivers when it says press F6.
Otherwise, you will need to change AHCI Mode IDE in the BIOS (BUT you cannot change it back to AHCI after). Well, you can with a registry hack
Or you need to integrate the SATA drivers, then reinstall windows
This is what the stop error 0x0000007B means. He can not find the hard drive (if you add or integrate SATA drivers). It will crash before you get the installation / configuration screen (XP, since the XP CD doesn't have SATA or RAID drivers on that).
And clear the virus check option in the BIOS if its permit
-
I tried all the methods auto repair, as well as two agents to interview different good driver, to remedy this error, but without success. Here are the details of the error:
Collection 44 BC
8AFD3A48, 00001DOB, 00000000, 00000000.
I have a laptop Vaio (Vista 32 bit). Can someone help with this... PLEASE?
Hi timbond,
(1) since when are you facing this problem?
(2) when exactly this question produce?
Please quote the complete error message you receive.
The following actions could prevent a mistake like this does not happen:
(a) download and install the updates and your computer from Windows Update for device drivers.
(b) scan your computer for computer viruses.
(c) check your hard drive for errors.
Method 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Method 2: Download and install all Windows Update available.
Install Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
Method 3: Run the disk check to repair bad sectors on the hard drive.
a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.
b. at the command prompt, type chkdsk /f and then press ENTER.
Now, type chkdsk/r
Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.Method 4: A scanner online for any threat and try to correct
http://OneCare.live.com/site/en-us/Center/cleanup.htm
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: C:\Windows\Minidump\072513-19609-01.dmp
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
More information about the problem:
BCCode: f4
BCP1: 00000003
BCP2: 86BF9030
BCP3: 86BF919C
BCP4: 83060EB0
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\072513-19609-01.dmp
C:\Users\udaya\AppData\Local\Temp\WER-46862-0.SysData.XML
Why this type of problem on the display screen & restart again, please send my email to what solution should I do.
Thank you best regards &,.
U.K.Amarasinghe.
Hi Uday,
Download and install the hotfix from the link below and see if it helps.
http://support.Microsoft.com/kb/977178/en-us
Good day!
-
Unable to start - bluescreen error Code 116
original title: I have windows vista and have a problem with blue screen windows won't open
Blue screen problem event name
OPERATING SYSTEM. Version: 6.0.6002.2.0768.3
Locale ID: 2057
Additional information on the problemCollection 116 BC
BCP1 868AE00
8CC11720 BCP2
O Version S 6-0-6002
Service Pack 2-0
768-1 product
Hello
I would recommend that you start with a boot minimum troubleshooting since you can get into safe mode:http://support.microsoft.com/kb/331796/en-us
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Windows 7 bluescreen error BCCode 116
I have a laptop Acer 5738, what CPU Intel core 2 Duo and 4 GB of DDR2 RAM.
These days, I am facing problem of bluescreen with error codes as below:Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033More information about the problem:
BCCode: 116
BCP1: FFFFFA8004C1C110
BCP2: FFFFF88003C46CB0
BCP3: 0000000000000000
BCP4: 000000000000000D
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\112809-19578-01.dmp
C:\Users\\AppData\Local\Temp\WER-1823448-0.SysData.XMLPlease help me.
How your message concerns the Windows Update feature (compared to the Windows upgrade)?
If you have upgraded to Win7, you can post about the problem here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
If this is a brand new with Win7 preinstalled computer, contact the manufacturer under warranty or Service contract or ask your question here: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Frequent blue screens various bluescreen errors
frequent blue screens and had the virus; reinstalled by default and loaded MS security essentials; always have blue screens; the system indicated that it was a hardware problem (Dell E521 Deminsion # sub Vista Home Premium. A run basic diagnostic, no error is reported; has ran the diagnosis by focusing on the blue screen area got the error on SATA S/N 5QE2RBPR; long self-test error code 0f00:075 device D IDE failed; Read OFOO:0244 block 370264344 test data impossible to correct error or media is write protected. Check the test 0f00:1 A 44 #same block numer and error error message as previously. Trying to focus in this hardware problem may be. RobM
Hello
Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
at this link as they will help solve or at least narrow down the questions. After that you can post the
information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
check with a real store of the computer or the system manufacturer's support would be a good idea though
I would try the possible solutions, you can first.Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).You can use BlueScreenView to stick the BSOD info in a message here.
NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
Paste the lines in a message here. Make sure and check the file name section. Also check the time
in MyEventViewer for more information as possible.===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Bluescreen error 0xc0000018 on Windows 8
* Display for the customer account *.
The PC is an Asus N82JB with 64-bit Windows 8 and meets the minimum requirements of the system. Cold start the PC, the PC has frozen, then performed a hard reset and the error on blue screen appeared read 0xc0000018error. The client is trying a system restore.
This could be a driver problem? I find no information about this error, except the one that applies to the office, so is therefore irrelevant in the present case. Can anyone provide more information about this error?
Thank you!
Hello
Definitely check with the support of ASUStek, their documentation online and drivers, and
Ask problems known in their forums. Given that Windows 8 is very recent, you should
check closely with them in the coming weeks or more. Look for the updates of the
BIOS, drivers low-level chipset and drivers of devices shipped major. Also check with
3rd manufacturers part such as video, sound and network for updated drivers.ASUStek support
http://support.ASUS.com/ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usASUStek drivers
http://support.ASUS.com/download/download.aspx?SLanguage=en-us========================================================
Note There are not specific online and/or resources KB for Windows 8 yet if you
may need to translate some of the Vista and Windows 7 methods. Special
Note must use Win Key + X and Win Key + W (to access control panel, run,
and settings according to needs). Win + D key calls the office and using the key to victory
Activates / deactivates the desktop and start screen.Translate these methods of Windows 8 (there is little real difference):
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7 and 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
BCCode: 18 0 x 00000018
chipset drivers.Other possibilities include malware and antivirus/antispyware/security programs even and
others. See the driver update methods in the following message when you get to this part of the
convenience store and return to the if necessary troubleshooting tool.BCCode: 18 0 x 00000018
Bug Check 0x18: REFERENCE_BY_POINTER
Bug REFERENCE_BY_POINTER control has a value of 0 x 00000018. This indicates that the reference of an object count is illegal for the current state of the object.Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
REFERENCE_BY_POINTER settings
The following settings are displayed on the blue screen.
Parameter Description 1
Object type of the object whose reference count is lowering.
2
Object whose reference count is lowering.
3
Reserved
4
Reserved
Cause
The reference of an object count is illegal for the current state of the object. Whenever a driver uses a pointer to an object, the driver calls a kernel routine to increase the number of references to the subject of a. When the driver is done with the pointer, the driver calls another routine of core to reduce the number of references by one.
Pilots must match calls to routines that increase (reference) and decrease (dereferencing) the reference count. This bug check is caused by inconsistency in the reference of the object count. As a general rule, the inconsistency is caused by a driver that reduces the number of references of an object calls too many times, additional dereference the object. This bug check can occur because the object reference count tends to zero, although there are still open handles to the object. It might also occur when the object reference count is less than zero, if there are handles open to the object.
Resolution
Make sure that the driver matches calls to routines that increase and decrease the number of references to the object. Make sure that your driver does no additional calls to routines that dereferencing the object (see parameter 2).
You can use a debugger to help analyze this problem. To find the handle and pointer to rely on the object, use it ! object debugger command.
KD >! address of object
Where address is the address of the object given in parameter 2.
BCCode: 18 0 x 00000018<-- read="" this="">-->
http://www.faultwire.com/solutions-fatal_error/reference-by-pointer-0x00000018-* 1039.html? = date order-------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Bluescreen error driver Tecra A4
Tecra A4 model PTA42A-01C001 running XP - Pro bluescreens occasionally with a driver error. I can't find my model on the download from Toshiba site. Can someone please help?
Very interesting, mate! :)
Thank you for your comments. It's always interesting to read.
Maybe you are looking for
-
Someone with a similar name from Skype like me have an erection * beep * as their profile picture. It's very embarrassing when I give someone my ID as they find this image. I want Skype to take down this disgusting image. How can I ask to do this? I'
-
reformatting of the unknown disks
When I try to reformat, I get unknown disk x 4. Last time I have done, I had a space partitioned with disk space. I have sata raid config HD basically I can't reformat because this is not recognizeing my drives I think.
-
I have 64-bit windows vista and my cbs log file is corupt
I ran scannow sfc, but I didn't need to solve the problem of aid
-
Display files of raw (.orf) Olympus in Photo Viewer files
Windows live photo viewer does not disply .orf (Olympus Raw files) if I have downloaed and installed the codec Olympus raw for vista on the olympus site?
-
Hello I use BBZ10 with OS 10.2.1.2102. I found that my contack is dark background now, can I know can I put my system into dark setting as well? Thank you