TouchSmart 15-4010nr is no LONGER to START - Code BCD error 0xc0000034
Cannot start Windows 8. I get the BCD 0xc0000034 on a blue screen error code. System Restore does not restore, and I also tried an auto repair in the limited options given to me, nothing helps.
Recently I had turned off the dynamic scale in an elevated command prompt, and then a few days later I turned on "use platform clock" as well. However, since doing so either or both, I was able to turn on/off the laptop without a hitch.
I guess me to play with the BCD settings had something to do with it. For the record, I turn me off checking dynamics in order to reduce the latency DPC in Windows 8. As a DJ, latency spikes are unacceptable and I read this as a solution.
Any ideas?
Solved - for the record - follow the instructions given in this link:
http://pcsupport.about.com/od/fixtheproblem/HT/rebuild-BCD-store-Windows.htm
Tags: Notebooks
Similar Questions
-
My laptop HP Pavilion G6 takes so long to start and other issues.
Hello! I have problems with my laptop, I have a HP Pavilion g6. This isn't an old computer I only got it for less then a year. My laptop takes so long to start. When I turn on the laptop it takes so long to come to the screen where u enter your password and when I type my password it takes so long to come to my home screen and now its freezes sometimes when I throw things like facebook or other things. I tried fixing it by having my laptop for a problem look. He found a problem that I've corrected, but it did not help. I tried google, and he says things like u might have a lot of cookies, junk files, virus or cache etc (I have an anti-virus installed in my computer as well). Very confusing! Its my 1st laptop after a very long period and this information is very confusing to me. If anyone can help!
Original title: problem with my windows 8.
Security Essentials scans files as they are downloaded from the Internet, Yes. In my opinion, no other additional internet security is necessary as long as you practice good habits like not downloading websites you really trust and take seriously the messages of warning and never just by clicking 'allow' unless really trust you him.
Also on startup programs, you have no need to again use the program. If you disable on this auto start, you can still open the program when you want normally (the only difference is that the program cannot start itself without you more).
-
Hyperion EPM services take too long to start
Hyperion 11.1.2.3
Windows 2008 R2
32 GB of memory on each server
Java 1.6.35
Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).
Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea
< 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
< 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
< 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>
< 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >
< 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >
< 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >
< 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >
< 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
< 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >
< 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 12573
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storage TP 0 as CN = Entrust .net Secure Server Certification Authority
TP-1 treatment
Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1
Treatment of TP 2
TP 2 storing as authority of Certification CN = Entrust .net (2048)
Treatment TP 3
Storage of TP 3 in CN = GTE CyberTrust Global Root
TP 4 of treatment
TP 4 storing as OU = Secure Server Certification Authority
Treatment TP 5
TP 5 storing as UO = class public primary Certification Authority 1
Treatment TP 6
TP 6 by storing like UO = class public primary Certification Authority 2
TP treatment 7
TP 7 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage of Secret4
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret5
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret6
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret7
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm
OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...
OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...
Oracle Wallet: Pocket size 3941
OracleWallet: getSecretStore
OracleSecretStore: load flow wallet
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Load flow wallet
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Safe opening 0
OracleKeyStoreSpi: Safe opening 0
Treatment TP 0
Storing TP 0 as UO = class public primary Certification Authority 1
TP-1 treatment
Storage of TP 1 in CN = GTE CyberTrust Global Root
Treatment of TP 2
TP 2 by storing like UO = class public primary Certification Authority 2
Treatment TP 3
TP 3 by storing like UO = class public primary Certification Authority 3
OracleKeyStoreSpi: Storage Secret0
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret1
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret2
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Storage Secret3
Get the sequence of bag
Get the alias of sequence
Get the secret of the sequence
OracleKeyStoreSpi: Keystore loaded
OracleWallet: getSecretStore
< 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
< 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
< 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >
< 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
< 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
Using the OraclePKI provider
taken javax.net.ssl.TrustManagerFactory supported
taken javax.net.ssl.KeyManagerFactory supported
Using the OracleJSSE103 provider
< 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".
< 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon". There is no such feature. >
ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.
On the road: ADF library non-ADFJspResourceProvider after deployment
Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16
null
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
< 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >
< 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
< 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
< 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
< 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >
< 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >
< 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >
< 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >
Do you still have this problem after restarting the server?
See you soon
John
-
Hearing of 2015 CC takes too long to start
Hearing of 2015 CC takes too long to start. As more than a minute.
Using administrator rights does not make a difference.
Fresh install... even though I updated from Windows 8.1 to 10 Windows (Windows updater) and I had hearing in Win8.1 so... is there any cleaner Adobe application that I could use to solve this problem?
I found the solution!
Simply find the file dynamiclinkmanager.exe on any folder of Adobe products, that is having this same problem, and remove the extension (.exe) format to it.
Confirm the action and open the hearing as quickly as it should.
-
Goes to blue screen, don't stay long enough to get an error code.
I upgraded to windows vista, then let it off all by installing. Now, it won't turn. It starts and then goes to blue not screen long enough for even a code of error of about 2 seconds, then asks me if I want to restart normally or repair of the launch system. Then runs the diagnostic system repair screen. All the tests were normal except for 'file system test (chkdsk)', it launches the application, but it fails. Windows tells me that it cannot fix the problem. If I need to format the computer very well, I can't since I have all my saved files externally, lossing them is not what worries me. Curious why its happens and how to fix it. Computer is only 11 months old.
Hello
If necessary can you start in Safe Mode - several times F8 tap that you start. Try the last known Configuration.
If no joy uses these methods to solve problems.Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Device could not start - Code 10 - Intel Wireless Card on NB550D
Hello world
It's just a normal Toshiba NB550D netbook
The only thing I change is the card inside Wireless: the original is an Atheros common half mini card. Recently, I have the urge to use internet in 5 ghz (frequency).
So, I decided to replace the old with the * half mini card Intel Wifi Link 5100 AGN *.
It turns so well. The pilot is not recognized or specifically the windows tries to install the driver but FAIL is reported. Device manager tool shows a "!" next to the network adapter and when I go the properties on the general tab: "* the device could not start - Code 10."I tried many ways to uninstall the driver and reinstall it again; also tried to download the drivers from the website of toshiba for the network card intel.
Nothing works so far and yes I don't know what to do now.
The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm.
Please help me solve this problem. I really need to use two strips (2.4 and 5 ghz) internet.
Appreciate any help!> The possibility that the card intel is broken or defective is eliminated because I checked with another laptop already and just, it worked like a charm
Regarding the error code 10:
http://support.Microsoft.com/kb/943104/en-us+ The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. +
I put t think deliver its wireless network card might be a compatibility problem between the BIOS and the wireless network adapter.
All devices are supported by the BIOS.But the WLan card already appears in Device Manager and so I think that there should not be a BIOS compatibility issue.
Have you checked if the chipset would properly address the Wlan card?
-
I'm usung Firefox 6 and I can see no longer thew 'source code' in 'view' on the toolbar.
I use Firefox 6 and I can see no longer thew 'source code' in 'view' on the toolbar.
Why is this?
I need this function.
regarding the Reos
This menu item has been moved to the Web Developer under the orange Firefox button menu and in the Tools menu. It is also available in the context menu - right-click on the web page you want to view the page source of.
-
Portege Z830 - Infineon TPM device cannot start (code 10)
Hello
I have a new Z830 - 10F, and I am trying to configure Bitlocker (windows 7 - 64 bit).
I have a problem with the Infineon TPM device. (Driver version 2.1.1.0)
This device cannot start (code 10).I downloaded all the drivers from Toshiba, but it does not work.
Any idea?
Thank you.
Hello
The TPM is optional and not equipped Portege Z830-10F unit a module TPM.
Welcome them
-
Satellite 1905-S303 PCI Wireless card does not start code 10
I put a PCI BCM94306PM broadcom wireless card in my laptop. The laptop is equipped with led however one is damaged and can not be connected, these cards may work with only one side and I even read somewhere that they can work on a short range with no led. My problem is the Device Manager indicates that the device cannot start code 10. I have a fresh install of XP Pro SP1 (not from the original restore disk). With this in mind, I think there must be some Toshiba utility or the missing driver to allow the map to work. Any help appreciated.
Hello
Code 10 means that it is not present, not working not properly, or does not have all the drivers installed.
In this case you need to download the latest driver on Toshiba website and install it.Best regards
-
HP 8440p: Audio device high definition - device cannot start (Code 10)
I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.
Device Manager indicates that "this device cannot start (Code 10)"
Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver
Details tab - value = device high definition Audio
Tab events - (information)
Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.
Any guidance is appreciated.
Hi @JS2045
The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.
I looked around for a driver W10 to the hardware ID you have published and fails.
This device is necessary unless you want or need audio via the port display.
The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...
Download, but do not work with this graphics driver...
Download and install this free utility for files. 64-bit is the second listed file.
After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.
Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).
Go to Device Manager and click on the audio device problem Intel HD requiring the driver.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.
Make sure that the include subfolders is selected and see if the pilot goes like this.
Then restart.
If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.
If this driver audio works on W10, I don't know.
But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.
-
Vista Start Up problem Boot\BCD error
Husband has Vista, and when he's trying to start his computer he gets the following error message:
File: \Boot\BCD
Status: 0xc0000034
Info: The Windows Boot Configuration data file is missing required informationI have the same make and model laptop and I have no problem.
Any suggestions please.
This knowledge base document Microsoft might help you:
+ Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information" +. "
http://support.Microsoft.com/kb/927391According to this doc the this error occurs when two
The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
The Boot\BCD file on the active partition is damaged or missing.See how to solve this problem.
Good bye
-
Satellite L300 - drive CD/DVGW cannot start (Code 39)
Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 39)
I have not really used the player for a while now, but it was working fine when I set up the laptop.
Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 39).I have downloaded the driver and re-installed but still does not work.
Help, please.
Thank you
Can you please tell me which driver you have reinstalled? AFAIK for optical disc drive there is no separate driver.
In any case put code 39 as a search term in this forum and you will find the solution to this. ;)
-
Satellite L300 - CD/DVGW SD-L622A - device cannot start (Code 10)
I n t really used the player for a while now, but it was working fine when I set up the laptop.
Now, I recently noticed that when I go to my computer, it shows three years not DVD player. I went to properties and Device Manager and it says only: "device cannot start (Code 10)"I thought it could have been an update. I downloaded, but no idea.
I restored in any case to a date earlier, but not had any luck, says always the same.
I was wondering if if there is a way to restore only a specific part of the material to the way it was just after the first implementation, rather than restoring the entire computer and have to download and reinstall just like my printer and so on.Any help is appreciated, thanks
Hello
You can fix this by removing a high low filters in the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}But before you will need to remove these entries go to the Device Manager and remove the drive from the list of devices CD/DVD.
Access to the registry, and then follow the above procedure.
Finally, restart the laptop.That article should work it worked on my laptop too.
Good bye
-
Hello
I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:
Askey WLL3070-D4 (MOW)
Atheros AR5BRB-43I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...
Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)
I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?
I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.
Does anyone have a location for a pilot, etc.?
Thank you
Hello
I always use this page for WLan driver update:
http://APS.toshiba-tro.de/WLAN/It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan
Ciao
-
my computer is grateful is no longer my disc code 45 acomdata external hard
my computer is grateful is no longer my disc code 45 acomdata external hard
Hello
1. have you tried to connect the hard drive to another computer?
2. what version of Windows are you using?
See the following link for the version of Windows you are using:
See Code 45 from following link:
http://support.Microsoft.com/kb/310123
Run the fixit from following link and:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Please do not respond with answers so that we can send us your request in an appropriate manner.
Maybe you are looking for
-
RAM how much my MacBook Pro support?
Hello fellow Mac users,. I want to upgrade my MacBook Pro, but I don't know how many RAM slots it has and how much and what kind of RAM it supports. Could someone get me noticed? Thanks in advance! MacBook Pro Model: MacBookPro 8.1 Processor: Intel C
-
3G BT Broadband Mobile (Huawei) problem with IE and Firefox, Satellite L300
The L300 Satellite running Vista 32 bit. I have a connection Broadband BT and with WIFI or ethernet at home I can connect to the internet and go without problem.I also have the BT USB Dongle for mobile connection far from home, this is the problem. I
-
Change language in Windows XP Home Home from Norwegian to English
I'm getting married to a Norwegian, where the operating system is currently in Norwegian. Is it possible to change the language to English without buying a new operating system?
-
Peripheral Bluetooth appears only not on the Satellite P300-11W
Hello I just bought the Satellite P300-11W (Win Vista Prem) and tried for a weekend to set up the bluetooth device. I installed the BT-monitor for several times.I can't find my internal bluetooth device in Device Manager. Therefore, I can't use bluet
-
Difficulties in tracing from a text file
Hey guys, I'm having difficulties draw a few data points in a text file, when I try to track myself in labview I get a graph that is frequency data v.s. points (16000) and not what I hope, because I'm looking to draw magnitude (y) v.s. frequency (x).