bluescreen lvl4 disp causes driver to go in a loop, how to fix?

Similar Questions

• BSOD lvl4-disp display driver

  Windows XP BSOD with drive to display lvl4 - Aff... device driver got stuck in an infinte loop... problem w/device or driver programming.  I downloaded
  update Dell drivers, but continue to spread this message.  Any ideas other than reinstall XP would be appreciated.
  Thank you
  Toni

  Hi Toni,

  Did you recent hardware or changes to the software of the system?

  Uninstall and reinstall the drivers for your graphics card and check if this solves the problem.

  a. right click on my computer, click Propertiesand click thehardware tab, then click Device Manager.
  b. in the list of devices, click on the graphics card.
  c. double-click the device name, and then right-click and select Properties.
  d. on the Driver tab, click on Uninstall.
  d. restart the computer.
  e. open the Device Manager select new Display Adapter.
  f. right-click and select Update driver.

  Refer to this article for help:
  How to manage devices in Windows XP

  You can also download the latest driver for the chipset and graphics card and install it on your computer.

• Upcoming fingerprint reader message 'drive not detected' - is not sure how to fix?

  Dell Vista computer

  Hi Poolroombetty,

  ·         What is the make and model of drive?

  ·         Did you do changes on the computer before the show?

  I suggest you run the fix it from the link below and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  I hope this helps.

• When I try to make my monthly backup on my external hard drive it won't finish it how to fix this?

  During my backup to my disk backup process external hard will get way just a little more than half fact and stop. How can I solve this problem? I've only been able to save once I have an external hard drive.

  Hello

  1. What is the brand and model of the external hard drive?
  2. What is the exact error message received when backup fails?
  3. Windows backup that you are using?
  4. What anti-virus software is installed on the computer?

  If you use Windows Backup and restore then please visit these links as a reference:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  Please post back with the State of the question so that we can help you better.

• Error code: 0X000000EA (0XFFAF79A8, 0XF9693CBC, 0XFFA44598, 0x00000001) lvl4-DISP

  I am running Windows XP on a Dell desktop computer and when I try to login, I get an error message stating that the device driver got stuck in an infinite loop.  Automatically search for driver updates.  How can I get connected so that I can check the updates?

  Hi MsJJN,

  This problem occurs because your computer has an Nvidia video card installed that uses the Nv4.DISP video driver.

  I suggest that you start your computer in VGA video mode activate and then install the latest drivers for display on the computer card and check.

  Remove all unnecessary devices in your computer, such as printers, scanners and removable storage devices.

  b. restart the computer.

  c. keep pressing the F8 key until the Windows Startup menu appears.

  d. Select Enable low resolution video (640 * 480) option and press ENTER.

  Once you are able to boot to the desktop, and then follow the steps in the below link error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER": http://support.microsoft.com/kb/293078

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the Windows vista firewall authorization driver is missing, the cause of the problem that the firewall cannot be activated? How to fix?

  Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?

  Hi James,

  Thank you for your e-mail. I solved the problem using System Restore.

• Satellite Pro A60: Blue screen - ATI2DVAG display driver. DLL in endless loop

  Hello
  Laptop is a Toshiba Satellite Pro A60 with ATI Mobility Radeon 7000 IGP video card, running Windows XP Professional and SP 2.
  During the start in most cases systems hang up with blue screen.

  I installed the latest drivers from http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK (Version dated 6.14.10.6430 Date 09/03/2004) but the problem continues. After second - last third - it reboot now works.
  The blue screen says (translated from German):
  "Component that probably caused the problem: ati2dvag.dll; the device driver is in an infinite loop; Subsequently the unit does not work, or the device driver is not program the equipment in the right way. STOP 0X000000EA. A dump was created.

  Please HELP - THANKS in advance!
  Best regards
  Frank

  Hello

  I studied a bit on the Toshiba site and found this interesting paper Toshiba on the error message Satellite A60 and blue screen on startup.
  http://support.toshiba-tro.de/KB0/TSB5300X7000MR01.htm

  This document describes how to upgrade the BIOS. The update of the BIOS should help solve this problem. Take a peek inside.
  Please post if you have solved the problem

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Hi, I have a macbook 13 "retina pro and for some reason any when I try to plug in my external hard drive or a computer SD cards don't regencies them because they do not open on my screen. Does anyone know how to fix this?

  Hi, I have a macbook 13 "retina pro and for some reason any when I try to plug in my external hard drive or a computer SD cards don't regencies them because they do not open on my screen. Does anyone know how to fix this?

  Have you looked in the Finder?

• When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  Restart the computer and try again.

• locked out of my access denied hard drive I'm the adminastrator? files was broken or something how to fix without cd

  Access hard drive c: undeniable access I'm the adminastrator. files broken or something that I don't have a cd to reinstall his striped how to fix no cd and no access to drive c? In addition to the upgrade

  If you can log in as any user with administrator privileges, you should be able to 'ownership '.

  The quick check for administrative privileges is to right-click on 'start '.  If "Open All Users", it's one of the options displayed in the window, so you don't have administrator privileges.

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• CDDVD drive has been disabled by mistake how can this be corrected?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  CDDVD drive has been disabled by mistake, how do I fix the problem?

  ===================================
  Might be interesting to try to do a system restore to
  an hour before the drive has been disabled.

  See the following article:

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  And... the following link might be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

• This program of windows xp is on a Macbook Pro with a PC emulator. The drive needs to be replaced. How can I save the data from the side PC?

  This program of Windows XP (my wife) is on a MacBook Pro with a PC emulator (Bootcamp).  The drive needs to be replaced.  How can I save data from the PC to an external hard drive?

  Hi Alan,

  Thanks for posting in the Microsoft Community.

  I understand you are trying to backup the data on external hard drive since you replace the hard drive.

  I will definitely help you with this.

  Please visit the links; This should help you in files and backup files.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/320820

  http://support.Microsoft.com/kb/308422

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

• Windows vista 683 gb hard drive full of only the dates, how can I clean it? Fixed thanks

  Windows vista 683 gb hard drive full of only the dates, how can I clean it? I have 9 GB of free space. PC still allows me to watch Netflixs. Cool

  You are welcome.

  See you soon.