Bluetooth and the Application without head

Similar Questions

• We could get an update on the applications without a head for WebWorks?

  The road map of HTML5 is still nothing about apps headless.

  The Live session on headless applications is only "native".

  When we finally will be able to run services usable for basic applications and how will it work?

  We talked about this several times. Unfortunately at this stage we have no concrete plans in place. If you want to run an application without head or service, your best bet is native.

• Problem with the application without a head

  Hello.

  My application without head works well in the configuration of the device debugging. When I change to device-release service seems to be frozen.

  "The system. STARTED event"does not start and I don't know why.

  I tried to export the application and install tools, but I get the same result.

  Is there a particular reason?

  Thank you

  There is a known, issue please read this...

  http://supportforums.BlackBerry.com/T5/native-development/unable-to-get-headless-apps-working/m-p/26...

• Memory, databases and applications without head

  I've been struggling with this problem for some time now so let's go.

  As many of you know headless apps allowances of bunch of limit of 3 MB, which is fine, except when using Qt/Cascades objects that don't care much to consumption of memory, two examples are QNetwork and QtSql, who will blow easily your budget of memory in a single operation.

  I have simple ' SELECT * from Table' queries that consume more than 6MB, which then effectively disables the component without a head. More precise, I do the query the heap more than it consumes. So I tried libsqlite3, results were similar. It was however the promise to provide a chunck of mmap would or memory of static array for substitute of the bunch, but I can not:

  sqlite3_config(SQLITE_CONFIG_HEAP,...)

  to work correctly, it returns an error (1) every time.

  Unfortunately, I'm at the point where it seems that a component without head who uses SQL can be impossible with the current memory limit. Can anyone offer a solution to the use of SQL with headless while maintaining a service that runs reliably?

  -Are there when even to provide a static heap memory for QtSql use?

  -Are there a way to limit the memory used by QtSql?

  Thank you!

  EI

  The solution was to restructure my database, as awkward as this has been significantly reduced the memory required for the information necessary to satisfy the query of data in the buffer. In others, rather than have a huge database of the 8 column I broke it into several two databases colum - when the part without head wants just a little information is exactly what he will get so surprise elimination memory usage spikes.

  The problem still exists: as the database develops for a query memory requirements. Has no way to control the maximum limits memory use for QtSql complicating an app without elastic, even theoretically impossible to write head.

  EI

• The App without head - account provider not found - release form is linked to the Blackberry ID

  Hello

  I tried to fill out the app without head permission to

  https://developer.BlackBerry.com/jam/headless/

  It gave me an error "not found the vendor account. Before, visit the provider Portal to create an account or link an existing account on the portal provider with this BlackBerry ID. »

  My account is already linked, and I am able to connect to the provider portal using my blackberry id.

  Please notify

  Worked ok now.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.

• I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  Wow!

  So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
  • In the affirmative. launch creative cloud application and load the list of Apps and check.

• I'm in CS6 and the application window is too big on my laptop, it is off the screen both sides?

  I am in CS6 and the application window is too big on my laptop, it is off the screen on both sides, I have to scroll through the different menus. I tried Window / better and there is no options, window/workspace allows me to reset, but it doesn't matter. Is there a way for the application to adapt to the size of my screen?

  You can click on the Maximize button, which should fit photoshop to the screen?

  

• I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

  I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

  Manually delete the cache of the preview of your user folder.

  Mylenium

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• An unexpected error has occurred and the application will have to stop

  Hyperion 11.1.2.2, new environment.
  
  When you try to configure the EPMA database, Configurator crashes with the error "an unexpected error has occurred and the application will have to stop."
  
  Customer has configured the database of EPMA with success during the first time.
  
  Their DBA deleted database EPMA and re-created the database with the same name. Now, they are trying to configure EPMA data base and the Configurator crashes with the error mentioned.

  I had the same error after applying a few patches EPMA (.301 ou.302)
  Here's what Oracle provided support. This solved the problem for me to use the older, bigger jar file

  ----------------------------------------------------------------------------------------------------------------------------------
  Fix Oracle can be broken by the jar file that located awbconfig.jar
  d:\oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\Common

  There are missing classes in the patched version, latest of this pot

  To correct the configuration tool, you can make a copy of that existing pot and replace the old version uncorrected. To find the old version research
  \oracle\Middleware\EPMSystem11R1\.patch_storage\ to AwbConfig.jar

  To confirm this, look at the size of the current pot and the oldest pot - the news is 158 k and the former was 317 k - obviously a new miss some classes.

• After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  After selecting an area and the application of fill, where the "done" or "Tick" to remove the moving dotted line?

  Cmd - H show/hide extras, deselects cmd - D.

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.