An unexpected error has occurred and the application will have to stop

Similar Questions

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store could not be started" 0x8007045A error

  I can't use my convenience store. I can't even connect to the internet on the internet wireless network card. It says "an error occurred during the loading of the troubleshooting tool: an unexpected error has occurred." the Troubleshooting Wizard can not continue. 0x8007045A error code. Please help me. How can I fix it

  Hello Max,.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You did it all change (hardware or software) before the show?
  2. You receive error message when running the troubleshooter from network?

  0x8007045A error Codes are caused by files system badly configured in your windows operating system. It is format of common error code used by windows and other software compatible windows and driver vendors.

  There may be a lot of events which may have led to file system errors. An incomplete installation, an incomplete uninstallation, incorrect removal applications or equipment. It can also be caused if your computer is retrieved from an attack of the adware/spyware or virus or by an abnormal shutdown of the computer. All assets that the above may result in the deletion or corruption of entries in the windows system files. This corrupted system file will cause information missing and wrong linked and files needed for the proper functioning of the application.

  Try it out below mentioned steps and check if it helps.

  Method 1:

  Update or reinstall the Microsoft XML parser

  To download the latest XML parser, visit the following Microsoft Web site:

  http://msdn2.Microsoft.com/en-us/XML/bb190622.aspx

  (http://msdn2.microsoft.com/en-us/xml/bb190622.aspx)

  Method 2:

  Replace corrupted files

  To resolve this issue, follow these steps:

  1. Copy the following DLL files in the C:\WINDOWS\SYSTEM folder on a computer that runs on the computer that is experiencing the problem:
  • Msxml3.dll
  • Msxml3a.dll
  • Msxml3r.dll

  2. after replacing the files, you must save the files. To save the files, follow these steps:

  1. Click Startand then click run
  2. In the Open box, type REGSVR32 C:\WINDOWS\SYSTEM\MSXML. DLLand then click OK. You receive a message when the registration is successful.
  3. Repeat steps a and b with the following files:
  • C:\WINDOWS\SYSTEM\MSXML2. DLL
  • C:\WINDOWS\SYSTEM\MSXML3. DLL

  4 restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store was not able to start.

  I can't use the convenience stores in the Panel and trouble getting my printer to re - install, when I click on devices and printers in Control Panel, rather than load him immediately, a green bar moves along the top where devices and printers are, but you can click on the choice and it will load If I go in safety in the Panel and choose troubleshoot, I get the error message, an error is produced so that download troubleshooting, or an unexpected error has occurred, the Troubleshooting Wizard can not continue. When I tried to access microsoft fix - it, I get the error message, troubleshooting cannot continue because there is an error, runtime error, code: 80040402, also 0x800B010E error codes. I am running windows 7 service pack 1 on Dell Inspiron laptop. I'm pulling my hair out! Help, please!

  Hello

  1 did you changes to the computer before the show?

  2. which antivirus is installed on the computer?

  I suggest you follow these methods and check.

  Method 1: Perform clean boot using the suggestions mentioned in the below mentioned link.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Run the tool (SFC.exe) System File Checker and check.

  Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833

  See also this link to resolve script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Method 3: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 4: Check the functionality in another user account.

  If it works in a different user account, then the user account is damaged.

  Create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Another thing appears and it says: "an error has occurred in the application. I hit restart request,

  I have a problem with my BSplayer. I'm trying to open a video and the BS 'bar' appears, but there is no video. Another thing appears and it says: "an error has occurred in the application. I hit restart request, it did not work. I also tried to see the bug report, but I couldn't understand him. Please help me. Moreover, it worked great yesterday. And I also tried with other videos but with the same result.

  Hello

  Uninstall/reinstall or you might ask their Support Forums.

  Cheer.

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• Z10 Help BlackBerry - Blackberry error - an error has occurred and Blackberry World will be closed - tried EVERYTHING!

  Whenever I try to launch the Blackberry World, I get the message ' year error has occurred and Blackberry World will be closed. "  Try to wait a few minutes and reopening Blackberry World. "I have read all the post and unless I missed something - nothing works.

  I have a Blackberry Z10 - STK100-1

  Software - 10.2.1.2977

  I tried-

  • launch of BBW with just using Wifi
  • launch of BBW with just using the data
  • launch of BBW with Wifi and data
  • Resets hard (after changing the settings above)
  • Soft resets
  • Battery grips
  • Tried to access BBW through 'games'... three points...
  • BBW of opening online and trying to access my blackberry through the online program.

  AND I just wiped my blackberry to start again, and it still does not!  Restoring my data was carried out using the 'fast' backup, so it should not be due to a conflict with another program.

  Can you please help - I'm about to tear my hair out!

  OK, as a work possible, try this: go to your music folder. Press the three points at the bottom right. I believe that if you have downloaded all the music in the BBerry world, the choice to access BBerry World will be there and it should work. If this is not the case, here are some other workarounds.

  http://www.BlackBerryOS.com/content/if-you-still-having-issues-BlackBerry-world-your-Z10-here-few-mo...

• An unexpected error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  This happens everytime I open a session.

  When I started my computer an error code appeared as follows: unexpected ___An error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

  Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

  [13: 34:50] status: error
  An unexpected error has occurred.

  [Source: the timeout of waiting for an answer]

  Internal error UVSC

  Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
  [0x1] code: 1]

  Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

  I tried to reinstall the whole arm labview and it does not work.

  Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

  Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

  Now, back to actually do the work.

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Assistants ' compatibility, troubleshooting or diagnostic "hang on display the following error message: error __An occurred when troubleshooting -"an unexpected error has occurred. The Troubleshooting Wizard can not continue. »

  I have Windows 7 RC OS installed on my PC. Sometimeback, I ran Windows 7 Manager (one click Cleaner) on my other partition where Windows 7 Ultimate is installed to clean all junk files. However, after removing these junk files my McAfee Virus Scan Plus ceased to work and simultaneously all my assistants troubleshooting and diagnosis also became disabled/inadmissible (statement of the error messages as mentioned above). Somehow after visiting the site of McAfee, I could eventually make my functional McAfee Anti Virus but this problem has not been resolved so far despite my trying all work related arounds suggested by various members of the forum of MSDN & TechNet Web sites.

  Error details:
  Package ID - PCWDiagnostic
  Path - C:\Windows\diagnostics\system\PCW
  Error code: 0 x 80131700
  Source - engine
  User - alok-companion\acees
  Context - high

  Hi ALOK CHANDRA SINGH,.

  Thanks for posting your question on the Microsoft answers forums!

  Error code 0 x 80131700 is generally relevant to the old version of the .NET Framework installed on your system. By default, the integrated Microsoft .NET Framework version is 3.5.1. You can reinstall Microsoft .NET Framework 3.5 Service Pack 1.

  Please follow the steps mentioned by Dale Qiao, see link below
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/2e8d4b54-b7d7-47BC-83cf-d9db907b037b

  If the problem persists,

  I suggest you try the following steps:

  Step 1: Start the computer in safe mode and check if the problem persists

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If you are able to work without any problem in safe mode then you can deduce that some third-party software is causing the problem

  Step 2: The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  Step 3: Run a scan online for any threat and try to fix them (in normal mode)
  http://OneCare.live.com/site/en-us/Center/cleanup.htm  

  See the link below: 

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  You can install version Windows 7 RTM (released to manufacturing) as many bugs and compatibility problem has been resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• An unexpected error has occurred - Apple tvOS 9.2

  Since my Apple TV 4 Gen tvOS 9.2 update, I have problems w / playing some movies I have purchased through iTunes. Get "an unexpected error has occurred" and an ignore"" button. The titles of films even play fine on my Macbook, iPhone and Windows PC. Replaced my Apple TV 4 material during the weekend but the problem persists with the replacement unit. Contact Apple Support confirmed reports addtl of the problem and how it could be related to a recent change in the backend to the iTunes store. Help w / titles problematic movies. If anyone knows the same thing, support both want to hear from you.

  Have the same problem
  bought nine ATV4

  Do not play anything on the account

  Does not buy new movies

  "Unexpected error".

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• Fix the installation Center has encountered an error - an unexpected error has occurred

  I had tried everything to install the Microsoft difficulty It Center but get the same error at all times and have no idea why.  The error message is:

  Fix the installation Center has encountered an error

  An unexpected error has occurred.  Close, and then try to install again.

  
  

  Of course I tried this several times with the same results.  I am logged on as administrator and cannot find any specific details as to why it persists.  Can you help me?
  

  Dave

  OK, besides it seems that this happens if AutoPlay is disabled (!).

  http://social.Microsoft.com/forums/en-us/fixitcenter/thread/9089abba-ACA9-4833-ab71-c863c69d696d

• Error in Photo Story 3 - "an error has occurred and should be closed. We apologize for the inconvenience. Results may have been lost.

  Original title: Photo Story 3 for windows
  try saving the photo story 3 project in order to proceed to the next time. Message that appears:

  "In Photo story 3 for w. an error has occurred and should be closed." We apologize for the inconvenience.  Results may have been lost.  You want to send a report? Yes/No"(from Microsoft). (But a response never happens). Does anyone know how to help out me?

  Hello

  You try to save the projectas a project .wp3 file or a .wmv movie file?

  Try to save the file as a .wmv file and check if the problem persists.

  To record a movie .wmv file that should play in Windows
  Media Player:
  a. After you have finished working on the project, when you get to the option "what do you do with your story.
  Select this option, "record for playback on your computer.
  b. Select a location.
  c. click Next.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.