Bluetooth control via FN + F5

Similar Questions

• Bluetooth control fails to initialize after mating

  Hi all

  I have a problem similar to a previous question (here). I use Windows 7 Home Premium 64 - bit on an HP HDX 16 with Broadcom integrated wireless. I have associated my pioneer What AS-BT200 attached to a VSX-921 k. This device has been paired before (it can use 3 codes pairings - 0000, 1234, 8888 - and I've matched initially by using the 0000 pairing code) but now it wouldn't connect. I have problem different havea pair my headset Rocketfish BT and found that it would not connect automatically, so I have to open my Bluetooth devices, right click on the device and click the control. In Control Panel, click on connect and let it open to keep the connection (really, why's do not connect an option from the context menu...?) Sorry, Rant off)). I thought that this could be the problem with this camera as well, but when I try to open the control I get the error message:

  "This operation could not initialize. Try again after turning off the Bluetooth and then back on. If the operation fails to initialize, try again after restarting this computer. »

  Long story short (er), I tried to restart the receiver and computer several times, I tried to remove the device and matched on all peel them three codes (he made pair, installs drivers and shows well, but does not connect), I checked, I last Broadcom Dirvers, I checked that the BT from my computer connects to other devices (D100 Creative - no problem (, Rocketfish headphone with the hoops above) and also checked that the computer was not connected to another device. I checked that the AS-BT200 connect to other devices (connect to my I-Touch).

  No idea why this device breaks down or how I can get it to connect?

  V/R

  Treamayne

  Hello

  Here is a solution I found which may be useful for you.

  If you go into the settings of your Bluetooth adapter, you should see a tab for Audio.

  No tab for Audio - tabs are Options, some COM Ports, hardware, sharing and PIM

  In this tab, you should see "Stereo Bluetooth Audio, headphone" listed. Highlight and select "connect".

  No parameters don't like that in the previously listed tabs.

  If this is not the case, the next step is to open the control panel and go to his. So for the first tab called reading. Who listed there, you should see the Bluetooth device you connected previously. Stress and make the default playback device.

  Playback of bluetooth device is grayed out without an active connection, and while it is gray, it does not define it as default playback device.

  All that said... today for no reason discernible he leaves not open the Bluetooth control window, but when I pressed the connect button that failed.  I reset everything and am now at the original error.  So I don't know why he has allowed an opening time of the control panel for the BT device or why the connection failed when he opened the window.  I will pursue other options and check with the technical support of Pioneer as well.  I'll post here if I get any where, but because I'm leaving on a 4-month business trip soon I can just put it out of this matter until the holiday when I get back.  Thanks to all who helped me this weird error.

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• Satellite A200-Windows vista-USB Bluetooth - control panel

  Hello

  I have a Satellite A200. In my previous notebook, a laptop Toshiba-no, I used a Bluetooth USB with Windows XP I've worked perfectly.

  In the Toshiba, with Windows Vista, I can't use it. I have not available section of the Bluetooth technology in the Control Panel, (the windows guide this option may be inside the material and audio control panel option) and I can not set up.

  In the planet of control device manager, I have the Bluetooth, properly installed w.vista. The Bluetooth USB is SMC-BT10.

  What can I do?

  Thank you

  As a first step you should check user s manual and check for what operating systems is the designed product. I am 100% sure, it may not work under Vista. Check it out!

  By the way: the third party hardware and software use is not supported by Toshiba. If you have any problems contact support from the manufacturer.

• the running program on myRIO with access to controls via wifi

  I built balancing robot using myRIO. It does not perform very well and I can control it via wifi. I have now the Setup is simple enough: I can control and set PID and Kalman (accelerometer gyroscope) values. However, there are significant delays associated with the wifi connection. Therefore, if I am happy with my performance robot WiFi (all the controls value) and then I deploy my program on myRIO - changes in performance of robots since the program is run on myRIO now and there is no bottleneck related to sending the data back and forth between computer and myRIO.

  To avoid this: is it possible to run the program under myRIO but have a link with all the necessary controls on wifi?

  Kind regards

  Drakon

  Drakon,

  Looks like you want to use your computer as a GUI that will read and write variables shared network your myRIO can also connect to.

  http://www.NI.com/white-paper/5484/en/

  It is quite common to all the treatment more push to a real-time controller while having a user interface on a computer that will basically just reading and writing shared variables.  I don't know if this is what you were asking, could you explain what you are currently on your myRIO and your computer, problems you have with your current setup and you want to change?

• DASYLab control via RS232

  Hello!

  I use dasylab to a small control. I would like to controll 3 adjustable transformers. The pc with the NI USB-6210 is near the transformer. Via RS232 I want to controll the processors of the control room. I have connected the two stand-alone (one near the processor) and the other in the control room with a cable RS232. Is it possible to use input RS232 dasylab for this effect? I'm just at the beginning of this project, and I appreciate all the information and advice you can give.

  Thank you very much and have a nice day

  Hilby

  For the RS232 string... we expect that the string must be delimited - for example, it ends with a. When you use the notation

  $1

  DASYLab will begin at the current location and put all the characters in the global chain number 1 (${STR_1} in other modules) until the \r (thecharacter). It does not put the delimited in the global chain.

  If you use the store in the chain, then catch it all on the line. If you need to anchor it better, use the string in quotes to search for a unique header before the $1

  "Single text" $1

  will interpret this line

  Single text can be stored in the global chain

  and store 'can be stored in the global chain' in the global chain 1. She anchors on the 'Unique' text and ends at the.

  For relaxation... use the pre/Post trigger... it's more reliable and outputs 0 or 5.

• Rigid body position and Orientation control via screen Simulator

  Hi all;

  I want to simulate a robot manipulator a LabVIEW Module of 2013 robotics.

  I watched a video on YouTube and get a few question marks.

  The link is here

  In this VI, the desired position and orientation of the definitions effector

  is obtained via the Simulator window

  First;

  I want to know How can I control the position and orientation of a rigid body through Simulator display with a mouse?

  Thank you for your attention

  I asked around and it looks like our team in Shanghai may have the code that was used in the video. I'll let you know what happens in the next few days, we have an example of community in the works.

• All the sounds of my event disappeared and have been replaced by a beep loud. Impossible to control via Control Panel.

  My sounds don't work anymore and the only noise I still is a strong signal. The sound is still very well when I play DVD, etc. I can't fix the sounds via Control Panel - I reapplied the sounds of Windows by default, but the problem persists. In addition, the beep does not disappear when I choose No. sounds or turn off the sound.
  This could be a coincidence, but this problem started when I tried to update AdAware and had an error of update that resulted in an error message reappears frequently interfered with Windows startup. I uninstalled AdAware and no longer see the error message, but still the beep.
  Thank you in advance for your help!

  Hello Ecate,

  Thank you for your message.  Take a look at the link below.  The beep question may just be the substitution of sounds of your system.
  http://blog.netnerds.NET/2007/05/5-ways-to-stop-Windows-Vista-XP-2003-from-beeping/
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the bluetooth control server file not copy files

  original title; CELKON MOBILE A95 device MODEL

  Not able to connect to the Bluetooth server control File and not able to copy files from the laptop to the phone's memory card. My laptop is HP 430 and Windows 7 Ultimate edition.

  Urgently need a solution.

  You receive an error?

  Try to run Windows Update and install all updates.

  Visit the HP Web site:

  http://support.HP.com/

  And install all the drivers for your laptop, you coul also contact HP support from there.

• Control via RS232 interface labview DC power supply

  Hello world!

  I'm new to labview and I'm trying to control a DC power supply using a serial RS-232 (output voltage). I can't use an interface Gbspecifications TO have only a single module that is used for another task. Any advice on how to go about it in labview?

  Thank you very much!

  Find the driver for your device here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=510F94BB50256F51E0440003BA7CCD...

  It will work for GPIB or series with VISA.

• P7000 control via serial port

  I just discovered that there is no module for 9178 chassis to interface with the drive of the P7000. We can use the serial port on the P7000 to control directly from Labview? What would be the best way to fight against it? P7000 tools to operate the stepper throughout the day.

  Thank you for your response. Using portmon, that we could determine the commands used with tools P7000. We have since modbus code embedded in the labview code and are able to control the speed and direction through the serial interface. I hope this fix can help others in the future.

• How to send power QL355P control via GPIB in labview

  Hello

  I use QL355P power, DUT and usbCAN part 3.

  I want to send OFF switch power control / IT for my DUT under will restart, using labview.

  I have no no on hoe to send commands gpib in labview

  is that all can help me?

  Let's focus on the other thread, as indicated by Ravens Fan. Please post here instead of here.

• Windows 7 does not recognize not my Bluetooth connection via mobile Samsung SGH-D900i. No driver is found. Answers, please?

  Hello
  After a research pilot note seems to be saying that my mobile phone is not compatible with the version of windows I am trying to connect my Samsung SGH-D900i mobile phone to my computer running on Windows 7 Home Premium. Why is it impossible for windows to find the right drive for my cell phone, please? What other solutions are there?
  Kind regards
  George Bekes

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  Method 1
  I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2
  I suggest you try the steps from the following link:

  The problems with Bluetooth devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 3
  I suggest you to download the driver from the following link and install it in compatibility mode and check:http://www.samsung.com/uk/support/model/SGH-D900MSIAUT-downloads

  Method 4
  I suggest you try the steps from the following link:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

  Reference: Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://support.Microsoft.com/kb/980396

• Angle control via the Wacom stylus wheel - how to?

  Hello

  At school, I started using a Wacom Intuos4 tablet with Photoshop CS6. And that's it works really well and give me nice results, but one thing I can't understand.

  I want to control the angle of a specific brush through my the intuos pen wheel.

  I thought I found all the important parameters, but somehow I can't make it work.

  Photoshop brush Panel is configured for that, right, correct?

  

  Somehow this small exclamation mark beside him, bothers me a bit, but if I choose 'tilt of the Pen' I also this exclamation point, but it still works...

  would it be because of some pilot things?

  Although I use the most recent available for intuos4 wacom driver.

  Maybe I have the wrong settings in my system prefs?

  These look like this, but unfortunately only in German.

  

  I thought, 'anwendungsdefiniert', which means something like "defined by the software itself" should do the trick. But then I don't see anything happening...

  Someone who can tell me how I should configure things?

  Thank you very much in advance.

  See you soon

  

• How to set the focus to the ComboBox control via actionsript?

  Hello

  I wanted the focus (describing the border) on a TextInput(id:myTextInput) and ComboBox(id:myComboBox) in actionscript. I tried myTextInput.setFocus (); that works very well for the TextInput component. In the case of ComboBox, myComboBox.setFocus (); works if and only if the ComboBox editable property is set to true. It does not work if it is not editable ComboBox. I wanted to put the focus on an uneditable combo box... Pls help... How can I achieve this?

  -Deepak

  Hello

  Try this:

  focusManager.setFocus (myComboBox);

  focusManager.showFocus ();

  Kind regards

  Adrian