Bluetooth doesn't work does not error: Server Bluetooth installation failure

Similar Questions

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones Media Manager doesn't work does not correctly after the installation of update

  I have a 8110 and put to level to the desktop 5.0 version.  Since that time, the Media Manager does not recognize the 8110 put pics on computer.

  What should I do to correct this?

  Thank you.

  There is no need of Media Manager.

  You can transfer files directly:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• AutoComplete doesn't work does not after installing IE *.

  AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
  ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
  for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

  sjakulski,
  Thank you for visiting the Microsoft Answers community forum.

  In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

  This should solve your problem.  Let us know if you need more information.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Caps lock key doesn't work does not correctly. New computer.

  My shift key does not work correctly. Sometimes it works, sometimes it doesn't. I push on it is difficult to ensure that it works. But used in a standard keyboard, it is a problem because I don't bang the keys. I have to keep retype phrases due to errors that it creates.

  Its a shame because my computer is new. In fact, within a month, it is the second time I have to look at the service center. First time because the memory of my computer showed I consumed 40 GB without even having saved/downloaded a single file/document. The repair center did not have an answer and reformat the computer. This problem has been resolved.

  Was so much happier with my Dell computer. Nothing fancy, but no problem.

  I have the same problem. the button is enabled as soon as the second or even third. you don't want to, but you have to take it back in service. Maybe it's a factory default.

• PC Backup doesn't work no-internal error: Server execution failed - error Code 0 x 80080005

  Hello

  I use Vista Business SP2.

  I'm having a problem with Windows complete PC Backup. When I click on the "create backup now" trying to create a full backup of the computer, spends about 15 seconds and then this message:
  
  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)
  Please check the configuration of your system and try again.
  
  I click on ok, and the message appears once more.

  I'm trying to save on the same disk external I used for backups. Backup of the files on this drive works fine.

  Here are a few things that may be useful to solve this problem:

  1. I recently uninstalled and tried to reinstall Sophos Anti-virus, but I can't reinstall.
  2. My computer has been restored using the backup of the computer in the past. I have not saved since.
  3. I recently changed the permissions/owner on the external hard drive that I support up to.

  Thanks in advance.

  If you have replaced TrustedIstaller with something else, which could very well be a part of the problem.  It is a user of the system and it can be called by the name of some programs and if she isn't here so the program does not know what to do.  I don't know how to solve this problem - I don't think add that a new administrator account to the user with this name will do (because it will have a different code).  In my view, that a re - install is the only way to solve this particular problem.

  Here is an article on the fixation of 4201 event viewer error: http://www.vistax64.com/tutorials/110886-event-viewer-error-4201-a.html but I wouldn't bother with this if you have an Installation of Windows Vista genuine disc.  Come back if this disc does not (and I don't think it will be necessary).

  CONGRATULATIONS on finding a disk for Installation of Windows Vista SP2 genuine - I guess that it's 32-bit (like your system).  It is exactly what you need - a commercial version.  The OEM versions do not work because they include device drivers specific to their computers and those who will hose your system unless they have exactly the same system for (and I don't think you can do an upgrade by using the OEM versions - at least not all of them - just a clean install {although I found a HP and it has used to update my XP system crashed then) ({I was waiting the disc of real update that I bought from Dell - not exactly kosher but finally in compliance}).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side (by copy and paste if necessary even if you can't use the full backup feature). If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install.  What version of Vista do you have currently?  I think that the drive will work with any version of Vista (they contain probably all versions on them and that they install is governed by the Code of the product used - but I have never actually tried using a different version of disc - I only heard this said by people who seem to know what they're talking about).  The fact that it is SP2 means that you won't have to uninstall all the Service packs that is even better.  I REALLY hope it works for you.  Make sure you use the UPGRADE option or you're going to do a clean install.  If the upgrade option is grayed out, it means that it will not work (but I don't think that this will be the case).

  If the drive works (and after installing all updates), then there should be nothing to fix on your system - it should work like new.  You should be able to do your backup with no error message.  Have no other problems.  This will fix the problem with TrustedInstaller so.  I feel confident thiis will work.

  I mentioned that Acronis because first of all, it's the best backup software and secondly because there could be a workaround, because it does seem like there was another solution because you do not want to delete this special software (but now that you have the disc - which is debatable – although it is still the best software {even though) ({, as you say, it's not free}).

  As far as Windows7 goes, I refer you to the Windows7 Forum at: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where the people who specialize in installation, the upgrade, and activation Windows7 will be more than happy to help you in the process.  I have Windows7 (my computer is not compatible and it is too costly to update since it's several components that need to be changed and my other computers are even older, so he has no hope here - I just have to wait until the "I need a new computer" but strikes me to new, but that will probably not for one or two years).  To be honest, I wouldn't intentionallly update at this point even if I could because I always wait a while before installing a new OS (generally up to the publication of its SP1 and in the case of Vista its SP2) to let other people work the new bugs - and there are some despite what you see in the ads.  Spend time on Windows7 forums, if you don't believe me.  Out of the box, she seems to be better than Vista did (which was awful) but there are still issues that need to be addressed - I'll wait instead until it is more stable (and a bit of my software is not compatible and I don't want to have to go out and buy all these updates at the same time (, because it will be too expensive overall).  But if you want to upgrade, which is perfectly fine - thousands of others do (always, especially since Vista has problems after all this time) and I totally understand.  This is just my own personal bias and procedure - I don't recommend to my clients that I recognize it as being just a personal preference rather than one-piece objective advice.  Before installing Windows7, make sure that your system is ready with the Windows7 Upgrade Advisor to: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx - you should perhaps update or remove some software and may not even need to upgrade certain hardware - better know before you start (especially if you go x 64 which I assume that your PC is able to treat - mine isn't).

  I hope this helps and wish you all the best in your effort to make the repair/improvement of the system.  I hope it works.  Remember that you must use your own product key to activate the software if necessary.  If it does not automatically have to activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you had a problem and you need to reinstall the OS but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

  Remote schema in 11.2.0.3 DB
  
  
  In 11.2.0.2 DB, I created a link pointing to a diagram in a DB 11.2.0.3 DB
  

  -- Used the new 11.2 syntax (similar to easy connect )
  
  SQL > CREATE DATABASE LINK dropLater CONNECT TO SCOTT IDENTIFIED BY SCOTT_123 USING 'blpclst-scan.ap.haster.com:3587/SNPG_AP.ap.haster.com';
  
  Database link created.
  
  SQL > select count(*) from ind_names@dropLater;
  select count(*) from ind_names@dropLater
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  ORA-02063: preceding line from DROPLATER
  
  
  
  -- But the Sysdate from dual test is working fine
  
  SQL > select sysdate from dual@DROPLATER;
  
  SYSDATE
  --------------------
  21 Nov 2012 13:24:29

  IND_NAMES Table exists in the remote schema SCOTT. Anyone faced a similair with DB links problem?
  
  I think that this problem is due to the difference in version (11.2.0.2 to 11.2.0.3)

  Hello

  I don't think that the other version is giving the problem.

  It seems that the SCOTT user doesn't have access to this table in the remote database.
  It seems odd if you say that the IND_NAMES table doesn't exist in the remote schema SCOTT.

  Could you run the following statements and see the objects owned by the user SCOTT in remote db?

  SELECT * FROM user_objects@droplater;
  

  If the table exists in the remote schema SCOTT should appear in the output among other objects belonged schema SCOTT.

  Kind regards.
  Al

  Published by: Alberto Faenza on 21 November 2012 14:55

• The home of the iphone 5 s screen button doesn't work does not correctly

  Home screen (middle button) does not work smoothly. Sometimes, it works very well and sometimes it doesn't. Someone might suggest it is a hardware or software problem that must do to solve this problem

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo.

  Also updated software iOS 10.1 over your WiFi

  See you soon

  Brian

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• HP Elitebook 8730w: Eject CD (context menu) doesn't work does not and can not play music CD

  Hello

  After the upgrade to Windows 10 (starting from Windows 7) my CD drive (HL-DT-ST DVDRAM GSA-T50L) does not work properly. I can play the audio files located on the hard disk or over the internet, but I can't play a music CD. Eject the DVD from the context menu fails ("" an error occurred..; ' ").

  The content of the Cd is visible in the file Explorer. I can open and close the CD door manually.

  I get no error in Device Manager ("this device is working properly"). Uninstalling the driver SNA by restarting the computer does not change anathing. The computer indicates that the driver is up-to-date.

  The upgrade to 32-bit Windows 10 has been without any problems.

  Any idea?

  Thank you. LeoEG.

  Finally, the Windows troubleshooting tool solved the problem. It installed a generic audio driver. Thanks for your effort. LeoEG

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Ctrl key doesn't work does not correctly

  Hello

  I have a HP Pavilion 17-e031sa laptop bought only 2 weeks ago running Windows 8.  The CTRL key does not work as it should.  In general, I would like to use it with the left button of the mouse to select non-consecutive items for the copy, but this won't work for this function.  It doesn't seem to be the key itself, because it does not work in the combination of keys ctrl/alt/delete.  I tried to uninstall the keyboard driver and restart, but without success.  Any help would be appreciated.

  Hi riggy69,

  Sorry for the confusion, I knew that these keys would not do the function you're looking for. I wanted to know if these shortcuts worked using the CTRL key. So we can see if it works this particular function or all keys ctrl shortcuts work. Quick access keys did what they were supposed to do? For example, the Ctrl + X cut the selected text, or Ctrl-Esc opens the start menu?

  Trying to see if there something wrong with the key itself or is someone wrong with this particular feature you try.

  Thank you