DB between 11.2.0.2 and 11.2.0.3 DBs version link doesn't work does not correctly

Similar Questions

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• FF12 and 13 spell check doesn't work does not correctly

  Most of the time, the spell check does not work as it should. I get homesick menu when I right click on a word bad spelled for suggestions. This is the menu I receive.

  http://i273.Photobucket.com/albums/jj216/Moonbarker/DSCN2437.jpg

  Sometimes, I get the list of suggestions, but most of the time, this is the menu I receive. This happens on all websites where there is an area where the spell checker can detect misspelled words. This happened since I updated to Firefox 12. I hope that the update to FF13 would fix it, but it didn't

  Normally, you get this menu if you do right click on the word, but on the text field that surrounds the word.

  You can try to reset Firefox and see if that helps in this regard. Refresh Firefox – reset the parameters and modules

• Jumping cursor, sporadic and touchpad doesn't work does not correctly for HP envy 15

  Hello

  I had my HP ENVY 15 t-q100 CTO Notebook PC in September 2014. It has 8.1, 64-bit Windows. For the first few weeks of use, I don't have any problems. Then, I started having occurrences more problems of cursor/touchpad to the point where it happens all the hours of use (not a problem of external mouse):

  Jump around on the screen (a few millimeters in inches).

  Move per increment on its own without me anywhere near the laptop (usually spazzes left).

  Does not allow scrolling functions / normal touchpad when problems are happening.

  Works as if I am holding down the click button while I try to move it - mostly frustrating when I make the important work.

  At random click things that I try to move it.

  Here's what I tried to do to fix this and did not work:

  Roll back the driver (did not work).

  Update driver (no update available).

  Reset the device (works for a minute or two).

  Reboot (I do it everyday anyway).

  Reduce the speed of the cursor and other mouse options offered online.

  I've seen similar problems for the HP Envy 17 and other laptops, but no real solutions have been proposed. Please help me with this problem.

  In January 2015, I received by mail, a brand new Envy 15 t-q100 purchased HP's official website. Packaging and the laptop is here Mint (aesthetically speaking). That being said, I had the exact symptoms described in this thread since the first day. With a replacing synaptics driver, I was able to stabilize the mouse enough to effectively use the tool 'curve of pressure. " Then, I determined that it was in fact a hardware problem. I noticed that from time to time, the "animation" icon would indicate that pressure is applied even if I wasn't touching the laptop. If I applied pressure by pressing or stirring on the basis of the Palm, would stop the pressure indication and use mouse returns to normal. However, this problem gradually went from bad to worse, and finally the touchpad does not have all together. Firmware and BIOS flashing helped before, but has been either nothing change.  I debated on referring to HP for repairs under warranty, but after having to wait a month to get this unit in the first place, in addition to reading all these horror stories of people coming back a semi destroyed unity and always faced with the same symptoms, I was ready to fight against myself. so, I found a source replacement nine track want pads 'zone of control '. Ninety-nine percent sure that I had a defective keypad, I bought P/N "761210-001" to "parts_direct101" for $59.95 ebay seller. Disassembly, I discovered that one of the screw mount for the pad was loose (this may have contributed to the problem). I decided to replace the pad in any case. Finally. No more glitches. After months of experimentation and reading these forums, I have now a mouse working 100%! It's been more than 2 weeks now, since I replaced the touch pad and still no problems! I use my laptop 3-4 hours per day. I always use the synaptics driver installed replacement from "dpinst.exe" found in the x 64 folder downloaded directly on the website of synaptics 'uncompressed'. I have not tried to update with windows update again. Just happy to finally have a mouse to work on this beast of a machine. I'll keep you all posted if this problem will never return. With regard to the absence being automated support generic responses to "Customer Service" aka HP, I guess HP has accidentally put on a bad batch of caterpillars and they simply cannot 'afford' parts, labour and logistics to issue a notice of recall of this magnitude! Unfortunately, this laptop must be completely disassembled to replace the touchpad. I would NOT recommend this fix if you feel that it is beyond your skill level. Instead, call the HP technical support and insist that you have received a unit with a defective keypad. I hope this helps!

• 6TO4 ADAPT NETWORK ADAPTER DOESN'T WORK DOES NOT CORRECTLY AND MY DRIVER NVIDIA GEFORCE 7600 COULDNT UPDATE.

  MY LAPTOP PROBLEMS AS SPEED TO MARKET AND TOO SLOW, I'M LEFT TO CHECK THE DIAGNOSTIC TOOLS.IT PROUNE PERFORMANCE FOR ME THAT MY 6TO4 ADAPT IS NOT WORKING AS WELL AS MY PILOT TO UPDATE NVIDIA GEFORCE 7600 COULD NOT... URGENT... I THANK YOUR OBTAINED IF NO SOLUTION... A lot..

  1. you can update your graphics here driver (just answering questions). Download the appropriate file, run it, follow the instructions on the screen, reboot when you are prompted. Check to see if that helps with performance.
  2. http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

• WiFi doesn't work does not correctly and he always finds Request Timed Out

  Hello

  I have two laptops side by side. On two laptops, I have 'ping www.google.com t' on cmd and most of the time "ping www.yahoo.com t.
  Laptop shows "Request Timed Out", but it's only in time and one or two occurrences whenever it shows "Request Timed Out". Portable B shows 'Request Timed Out' more often and several times it is displayed continuously as in the screenshot.
  This has been observed for a few months because I noticed on this subject.
  I wonder this has to do with the firewall or antivirus? Or that it has something to do with the infection by the virus?
  I am very little deep in the knowledge of it. Please bear with me if I ask funny questions. I would appreciate your help! Thanks :)

  Hello

  1. don't you make changes on the computer before the show?
  2. what web browser do you use?
  3. what anti-virus is installed on the computer?
  
  Method 1:
  You can try the steps in the link and check:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  You can perform a clean boot and check if any third-party software is causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can try to disable the firewall and anti-virus installed on the computer.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  For more information, please see the following links:
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• HP Elitebook 8730w: Eject CD (context menu) doesn't work does not and can not play music CD

  Hello

  After the upgrade to Windows 10 (starting from Windows 7) my CD drive (HL-DT-ST DVDRAM GSA-T50L) does not work properly. I can play the audio files located on the hard disk or over the internet, but I can't play a music CD. Eject the DVD from the context menu fails ("" an error occurred..; ' ").

  The content of the Cd is visible in the file Explorer. I can open and close the CD door manually.

  I get no error in Device Manager ("this device is working properly"). Uninstalling the driver SNA by restarting the computer does not change anathing. The computer indicates that the driver is up-to-date.

  The upgrade to 32-bit Windows 10 has been without any problems.

  Any idea?

  Thank you. LeoEG.

  Finally, the Windows troubleshooting tool solved the problem. It installed a generic audio driver. Thanks for your effort. LeoEG

• HP Envy, Windows 8 slow, late and does work does not correctly

  Hello

  First off let me give a run down of my installation:

  -HP Envy Dv7, (about one and a half years)

  -Windows 8.1 (I upgraded windows form 8)

  -HDD 750 GB (Stock)

  -Everything else is stock based on the computer

  So, my trouble started about 3 months after what appeared to be a routine stop after a day use.  The next time I started my computer took a lot more time to start, I got an error that talked about my control center catalyst having an error and does not and that nothing would be open to all.  After the merger with different ideas on how to solve the problem, I dropped and it factory reset.  This fix has worked for the whole two days were once again, I got the same problems, I did another reset and when it does not work I gave up for a while.  About two weeks ago, I again have to reset it and then updated for windows 8.1through microsoft dreamspark.  This seemed to fix my kind of problem, the same questions (not counting control catalyst who never returned after the update) would be upward if I have it plugged anything in the USB drivers.  Now for some unknown reason which was not the case for my wireless mouse which worked just fine.  If at this point, I have a mouse plugged wireless and no problem whatsoever.  One day I shut down my computer with the mouse is always plugged (I never do usually) after I do all my troubles to come back but enlarged.  I tried to do just a refresh of windows but it says that my hard drive is locked and let be honest I really want to keep refreshing and resetting my laptop and lost al my stuff.

  So now, here's a list of my exact problems in most occuences recentof, now:

  -Slow start and typing in my password take like five minutes to register that I typed in fact anything

  -l' unlock screen is for like five minutes

  -My Office take a good ten mintues to load all my icons and others

  -J' have a popup that says IEWebsitelogon, not having that take a long time to close

  -EACH window is delay, that is difficult to change their size, move about minimize, close, etc...

  -Every thing take > then five minutes for open including Manager, start menu task

  -Much more delay and related issues

  What is one thing to hard drive? They are not too expensive to replace, so I can get another copy of the win8 form my school so if that is the question that is very well.

  I really need help, my computer is basically usless, I am a student I need my computer please help me.

  Hello

  As you probably know, the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also entirely consistent with the problems of performance, as you describe in your initial post.

  If there is no help, the player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 56 of your & Maintenance Guide.

  Kind regards

  DP - K

• No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

  I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

  Install the audio for the brand device drivers and the computer audio device model you have.

  (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

• Restore factory settings doesn't work does not and did not reinstall Vista drive, download Windows Vista Home Premium

  Original title: Vista

  I need to re download windows vista home premium because: 1-workstation is not come with a disk and 2 - my system back to factory settings does not work

  Hello

  Here are the different methods to reinstall Vista; See suits you the method...

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Creative library cloud doesn't work does not (and assistance section probably points to the wrong folder address?)

  Good, then... I am excited by the possibilities of CC.  I want to get stuck in.  But I'm a little frustrated by that.

  The CC library does not work.  Muse, my CC library panel is empty except for the error message "something went wrong initialization library creative cloud", with a link "more information."  FYI, I saved the (pigeon) web design adapted in Adobe Muse | Muse CC tutorials Adobe files to my CC library and can see them when I go straight TO (my CC staff) my property.  They are there. I can see them.  But they are not load into the Muse CC library folder.

  So, I followed the 'Further information' link in the Panel of the box CC library what , helpfully, opens to work around the problem step by step. Article of the workaround is easy to follow.

  In summary;

  I closed all applications Adobe (Muse) and rebooted.

  I deselected "Hide extensions of known file types", via the control/appearance Panel and customization. (Yes... IM in a Windows laptop... don't hate me)

  I then follow the " AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\ 'directions to search for crime' ".

  Settings.JSON 'file, in order to establish the number SERVICE_PORT.  But the .json file is not there.  In the file CreativeCloudLibraries there are 3 subfolders; LIBS, MUSE and PHXS.

  Here, it 's a settings.json file in the PHXS folder, and there is a file settings.json in the folder of the MUSE, too. It has a third file settings.json in the folder "adobe photoshop cc 2015.2/required/plug-ins/spaces" as well.  But nothing in the LIBS folder.  (I searched SERVICE_PORT in all 3 of the above, PHXS, MUSE and photoshop, but the SERVICES_PORT info is not there... only a port number of debugging for the photoshop .json file... I tried anyway... obviously he wasn't going to work, but I gave it a try!).

  I can only assume two things;

  either, 1) .json to the CC LIB file has not been loaded for some reason any during the download.

  or 2) since article workaround " Solution to the issue: Adobe Creative Cloud Library Panel does not load in office products " was written, the destination of the file was placed during updates and article is now obsolete.

  Does anyone know how I can get around this please?

  Thanks in advance

  UPDATE: CC library work;  If anyone gets this problem with your CC library, follow these instructions: Solution to the issue: Panel Adobe Creative Cloud libraries will load not office products

  Be warned, I had followed this (to the letter) several times absolutely without success for a whole day! Yet, today, did exactly what I did before... the CC library is now up & running.

  Go figure?  Everything I know and care about is that it works now.

  Good luck

• M4C63UA HP #ABA stream: a pilot missing and 2 devices work does not correctly

  So, I recently switched to Windows (32 bit) 10... My netbook has only 32GBs so I thought that I get more space by using 32-bit and I have a lot more now.
  
  But minor issues however, I can't seem to get the touch screen to work or find the drivers for it.
  
  I also have an invalid driver; PCI encryption/decryption controller.

  

  And I also have two devices in Device Manager when windows cannot load the drivers required.

  

  For my touchpad drivers I don't see whatever it is in devices that I think might be them.

  I appreciate any help on all the above problems although 32-bit is not supported. I imagine that the factory can support 32-bit. I got some updated drivers using the driver easy, but I can't seem to update these drivers.

  Hello:

  This should be the driver that you need for the E/D PCI controller:

  This package provides the driver Intel Trusted execution engine Interface (CITY) for the laptop models running a supported operating system. The Interface of the Intel Trusted execution engine allows the Secure Boot and provides services required for the security features of platform such as Intel Platform Trust Technology (Intel PPT).

  File name: sp72335.exe

  Touchpad:

  This package provides the driver that allows the Synaptics TouchPad in the notebook models that are running a supported operating system. The pilot turns the touchpad General (for example, double-click and scroll) feature and provides a user interface.

  File name: sp72339.exe

  Unfortunately, I can't help you with the problem of the touch screen.

  The graphics driver that control it.

  For the other thing of the Intel Atom, please view the hardware ID of the device.

  You can find that by clicking on the watch your screenshot Details tab, select the 3rd item in the drop-down (hardware ID) and after the string of characters that appear in the window.

• F4 key doesn't work does not after El Capitan upgraded for my MacBook Pro. Used to be the date and time. Anyone know where to find it now?

  When I upgraded my MacBook Pro to El Capitan, the F4 key that allows to display the date, time and calendar has stopped working. Anyone know if this is not supposed to want to work more? Or how I can quickly display the date and time as I'm used to using the F4 function key?

  On my Mac running 10.11.2 which brings to the top of the dashboard. I think that there are now three different ways to make in the face of dashboard elements, which seem completely obscure to me. I just set mine to do what he did originally come in an overlay with the widgets running.

  Look in System Preferences > Mission Control...

  to halfway to the bottom of the box:

  Dashboard: {as overlay, like space, Off}

• Help and Support does not work does not correctly when you are connected to the Vista administrator account

  Click the startup of Vista and in the Search box , type WINVER , and press the Enter key on your keyboard.  Please report back with the correctVersion number and build shown . Carey Frisch

  Version 6.0 (Build 6002: Service Pack 2)

  I have the same problem exactly as described Flashimator don't except this: the problem occurs only when I am logged into the administrator account.  Support seems to work normally in my user account.

  I should add that my HP laptop has an OEM program which seems to be an overlay on the Windows Help.  It is also not available in the administrator account.

  (HP Pavilion dv9260us, Vista Ultimate x 64, Intel Core 2 Duo T7200 @ 2.00 GHz, 2 GB RAM)

  Thank you.

  PS It is often more important to have help available when logged in as an administrator as I do only when I have to (as in the resolution of problems).

  Hi Dyn0saur,

  Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  Regarding your question, see the article following some possible troubleshooting for your question:

  http://support.Microsoft.com/kb/917607

  In addition, an article on content help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-the-latest-Help-content

  Thanks for visiting the site of the community of Microsoft Windows.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think