Bluetooth, loss of connection, reconnect

Similar Questions

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Loss intermittent connectivity... Airport express router or modem problem?

  Airport express intermittent loss of connectivity?

  Not much information to go here.

  Please provide at least the following details:

  • What exact model of the AirPort Express model do you have?
  • What is an intermittent loss of connectivity? The Express, iPhone, another thing?
  • This working before and just started happening OR if this has always been a problem?
  • Did you do the upgrades of firmware or software recently, when this started to happen?
  • What have you tried so far, to solve this problem?

• Loss of connectivity

  Loss of connection to the internet even if the other computer in our home group has connection

  Hello

  1. what version of Windows are you using?

  2. you receive an error message?

  3. have you made changes on the computer before this problem?

  Please visit the following link.

  Wi - Fi and in Windows network connection issues. http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I suggest you to respond with more information to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• Choose a printer as the Bluetooth device to connect to

  Hey guys,.

  I use the following code (with success) to start sending data to a printer:

        BluetoothSerialPortInfo[] bluetoothSerialPortInfo = BluetoothSerialPort.getSerialPortInfo();
          StreamConnection streamConnection = (StreamConnection)Connector.open(bluetoothSerialPortInfo[0].toString(), Connector.READ_WRITE);
          DataOutputStream o = streamConnection.openDataOutputStream();
  

  However, the above code only takes the first Bluetooth device and connects to that. Is it possible to get some info on who's on the other end?

  (a) is a printer or another type of device?

  (b) if it is a printer, what model?

  See you soon,.

  Pav

  ... and here is the solution!

  Iterate bluetoothSerialPortInfo [] checking:

  bluetoothSerialPortInfo [i] .getDeviceName)

  It should have the printer brand and model :-)

• Bluetooth does not connect to the phone Moto G

  Bluetooth not connect to the phone of MotoGP

  How can I get there?

  Original title: bluetooth does not connect

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to connect to the Bluetooth.

  I will definitely help you with this.

  1. Do you receive an error message when connecting?
  2. Are you computer connection to phone with Bluetooth or other device?

  I suggest you go through the below methods:

  Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.

  Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.

  Method 2: activate Bluetooth Support Service.

  Follow these steps and check if the Bluetooth support Service is started.

  (a) press the Windows key + R, type services.msc and press ENTER.

  (b) make a right click on the service named Bluetooth Support Service.

  (c) check if it is started, otherwise click Start.

  Download and install the latest Bluetooth drivers on the manufacturer's Web site.

  Method 3: To add a Bluetooth device, see the following steps:

  Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:

  1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device

  2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.

  Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.

  See also the link below:

  https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Loss of connectivity to storage device

  It seems that I get one of them at least once a day.  A few times the data store is unknown and other times told me the name of servers.  I have 4 servers in my cluster, all Dell and an EqualLogic iSCSI SAN.  I'm really at a loss about why it continues to be.

  Loss of connectivity to storage device

  NAA.6090a028d0d00181588b241d3c7352b1. road

  vmhba33:C0:T25:l0 is down. Affected

  data warehouses: unknown.

  error

  2009-09-20 14:47:02

  Hi Chris:

  Make sure that you have configured according to the PDF attached things EQL. There have been some changes of VI3.5 regarding the iSCSI configuration and initiator software was completely re-written in vSphere. For example, multiple paths is a little different, and they recommend you actually have a vmkernel port for each physical NIC and that substitute you the failover parameters. You are or ESX servers can be remove connections that the volume rational access EQL moving to different Eth interfaces on the controller (just a thought). This is explained in the document.

  There is also a video cool tech that goes along with the document. http://www.EqualLogic.com/ResourceCenter/video.aspx?ID=8455

  Let me know if it helps!

  Dave

• Loss of connection with magic mouse bluetooth

  Since the upgrade to El Capitan I keep losing connection bluetooth with my mouse.  Not seem that this happened a lot with upgrade of Yosemite. This is the first time that ever happened and I got it for more than four years now.  Any ideas or am I right in guessing will have to wait for an Apple 'fix '?

  TNX

  Hi Triciafrommorden,

  The resources below provide some basic troubleshooting for problems with your Bluetooth mouse.  These give a try and answer if you still have problems with the Bluetooth connection between your Mac and your mouse.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  Care of tale,

• Recurring problem Bluetooth when I connect to Thunderbolt display

  Since upgrading to OS X El Capitan, when I reconnect my MacBookPro with a Thunderbolt display (Magic Mouse and Apple keyboard) Bluetooth devices do not work and I have to unplug and re - a SMC.

  Bluetooth cannot be activated and turn it back on, it just does not respond. So I always have to close all programs, and re - a SMC.

  So that work, but it is very annoying, how do I solve this problem of disconnection?

  I have OS X El Capitan, version 10.11.3 MacBOok Pro retina early 2015 with all updates.

  Thank you.

  I also have this problem on a Macbook Pro retina end of 2015.

  Bluetooth preferences shows:

  Cannot open the Panel preferences 'Bluetooth' because it is not available to you right now.

  To display this Panel of preferences, you will need to connect a device to your computer.

  And Bluetooth appears as "not available":

  

  I ran Apple Diagnostic tool and it told me that I had a defective Bluetooth (hardware problem) and instructed me to contact Apple for a replacement. And so I did.

  But the second Macbook, I got them also had this problem. Resetting the SMC is just a temporary workaround.

  I suspect it has something to do with the thunderbolt ports. They seem to cause some failure to bluetooth connected/disconnected...

  Also, the problem is present in Bootcamp (10 Windows) installation as well. The Bluetooth module appears like installed but with drivers hurt in "Device Manager".

• My iPhone 6plus Bluetooth will not connect to my headset, after having worked for 2 weeks, that has happened on 2 different pairs, now my new pair doesn't connect at all?

  My iPhone more than 6 is running iOS 9.2 where after awhile, it seems not longer connect to my Bluetooth devices. Now I have a new helmet and it won't even find them to connect.

  Replace the BlueTooth devices in pairing mode and they should reconnect.

• iPhone 5 sec Bluetooth does not connect

  My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

  I was able to pair with my ipad.

  Hello

  Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• MainStage - loss of connectivity environment performance

  Hi guys,.

  I seem to lose connectivity between my midi controller (m-audio code 61) and Mainstage environment performance. I lost sound and the warning message on the Mainstage saying that the midi controller is no longer available. Currently, I connect via the USB port, which also fuels the midi controller. I have to disconnect and reconnect the USB cable on the midi controller or laptop and then it seems to work again. Any ideas on how to solve this problem?

  Try another USB cable. A premium quality cable may be the solution. The connectors tend to have a tighter fit. Another alternative is to use a power supply and a USB MIDI cable, or connect via a cable to your audio interface MIDI, if it has a MIDI.

• Bluetooth will not connect to an external speaker...

  First time on this glitch. A single application refuses to use the Bluetooth to connect the speakers already running and local trips within the iPad 9.7 Pro speakers.

  Weird to say the least. I didn't think it was possible. App is Auria pro. Speaker Bose Soundlink is 3. There is too much lag so at noon on THE Bluetooth. Unusable in the record. Air play in particular advice from noon. There is so little data. Is not supposed.

  This app is the only one to date at the time. Latency is perhaps too for the program to even consider reading. I went on every single setting in the six pages of configuration.

  Is not an application taking control where audio passes unusual?

  Thank you

  I guess that's...

  Because it is located in the app, I suggest that you contact the developer of the app... maybe an update is necessary.

  Barry