Bluetooth on Dell place 8 Pro Running Windows 10 Technical Preview

Similar Questions

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• Reference Dell place 11 Pro shipping disappointment

  I am writing this primarily to express my frustrations and I hope that someone at Dell will take notice because I think to complain to someone on the phone at Dell will fall on the deaf ears and will be a waste of time.  It seems that we, the consumers are at the mercy of Dell and for me, this is unacceptable.

  A bit of history.  I ordered a Dell coming Pro 11 the day where he was available to order (11/8).  I had a few changes, I had to make to the order, remove their extended maintenance guarantee and remove the stylus and the keyboard - no change in reality have been made to the tablet itself.  This has been done on 11/11.  I never received a confirmation email from Dell telling me when should I expect my 'New' order, but I have received an order number of the person that I spoke, which was the only way I could follow the command.  The 'new' had a date of expected delivery of 12 to 18.  It seemed reasonable to me and I was happy to wait and excited.

  In the meantime, I started to order accessories - screen protector and a 64 GB MicroSD in preparation for the arrival of my tablet.  18 I still had not received my being shipped order notifications and Dell sent an email about why, or when I would expect it.  I had received SEVERAL phone calls indicating that the order was in production and should be here 12/18.  I think that on the 18th or 19th I checked the Dell order support site to see that the issue had been delayed until 02/01/2014.  I was shocked... and spoke to the person who asked me the prescription being in production about why it had not been shipped.

  The 2nd came and went, and still, only, I received a phone call from the rep of Dell indicating the order had been pushed back to 9, then on the 9th, declaring that it had been postponed until the 16th.  This morning I checked the Dell support site to be notified that the scheduled delivery date is 01 23, 2014.

  I canceled the order this morning because I don't think I, or someone else should wait indefinitely for their order to arrive once his promised summer unnecessarily.  The "estimated delivery date" is a joke and does not reflect exactly any time in which the order could actually ship.

  Looking on the Dell website, you can order a Tablet Dell place 11 Pro with the 16/01/2014 estimated shipping date all the way until 06/02/2014 depending on the type of Tablet that you choose.  I know I'm not the only one who had this problem and I hope that more people shut up someone at Dell reviews and change the way they do business.

  I work in the COMPUTER industry and I am highly disappointed by Dell.  For now I'll only order Dell hardware for the company I work for. However, we will have to reassess these orders as well.

  Thanks for listening/reading my rants, and I hope that others have had better luck I have.

  Michele

  Hi Michele Riley,

  Please this post in the forum for more quick help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Adobe Acrobat Pro DC will work on a 2 Surface Pro running Windows 8?

  Adobe Acrobat Pro DC will work on a 2 Surface Pro running Windows 8? If this isn't the case, it will work on any type of Surface feature?

  Thank you!

  Yes, the surface 2 pro is compatible with acrobat dc.  You can start a 30 trial to confirm.

  the surface 2 cannot run acrobat dc (because of operating system paralyzed).

• HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

  Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

  Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

  As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

  (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

  (2) check if the recovery Partition (usually D :) there is and run recovery from that)

  3) reinstall using Winows 7 retail disc and allows to activate the COA key

  (4) buy 10 Windows and install

• Dell place 8 Pro 3G - Sleep / Wake Up questions

  Hello

  A few days ago I bought the Dell coming Pro 8 3 G tablet. I have all available Windows Updates, latest drivers and BIOS of 'My Dell'. Unfortunately, my Tablet has some problems with the mode 'sleep'.

  1. only the 'Stop' and 'Restart' options are available in the drop-down list on 'Power' in the charming bar. 'Sleep' is not available and I can not turn off the screen by pressing the power button / stop on the right side of the tablet. I did a few tests using the powercfg command-line tool and I found, the driver mobile (or hardware) prevents the past in standby mode: if I disable the driver, I can put my device in mode 'sleep' without any problem.

  Mobile broadband driver:

  Dell 5570e Wireless HSPA + (42mbps network) Mobile Broadband Card #4
  Date: July 9, 2014
  Version: 14.7.1050.64

  2. to wake up to the top of the device to sleep mode does not work if you do this after the first 10 seconds in mode 'sleep'.

  When I disable WiFi driver in Device Manager, clock works well, even a few hours after the mode 'sleep' was launched.

  WiFi pilot:

  Dell 1538 wireless 802.11 a/g/n adapter.
  Date: July 4, 2014
  Version: 3.7.2.59655

  I don't know if these questions are based on the hardware or driver/software based.

  Everyone knows about similar problems?

  Kind regards

  Dominik

  Hello, I had the same problem and I tried all drivers update possible solution (reformatting my Tablet 6 times), the update of windows files, etc... Nothing helps. In the end, I found a similar problem for a Dell location 11 Pro user who suggests to turn off the TPM and Bitlocker. As soon as I disabled it Win8 table bitlocker and TPM/Bitlocker from the Bios (Secure boot - disabled), the Tablet began to wake from sleep with no problems... it's been 1 week now and it has not failed once (it allows to get a black 3 - 4 times per day before the change of the screen).

• Reference Dell place 11 Pro - can it work without battery, with power supply connected?

  Dell coming 11 Pro can be used without battery, with power connected?

  Yes, works perfectly on AC only.   Keep in mind that if you have a sudden loss of power that you might have some issues such as loss of data, corruption of data, etc..    As if you lost power on a laptop (without battery) or a desktop computer.

• W511 Windows 10 Technical Preview 0xc0000428

  Hi all

  First of all, I got this error: 0xc0000428 after my last Technical Preview of Windows Update a few days ago.

  It all started with not be able to connect or find any wifi at all.

  Now that the error does not, but during all the TS I now starts and says its done some modifications, it is said with a Windows warning window:

  "Windows is unable to complete the installation. To install Windows on this computer, restart

  installation. "

  So I guess the the smartest thing is to return to the window 8 new.

  Before I installed Windows Technical Preview that I made the backup of Microsoft asked,

  assume that it is this:

  http://Windows.Microsoft.com/en-us/Windows/preview-FAQ#FAQ=TAB0

  At least, it is in the installation steps.

  And this is how the file looks like:

  boot

  EFI

  sources

  Bootmgr

  Bootmgr.EFI

  reagent

  but there was NO any file installation or AutoPlay,

  so, how can I do this restore to Windows 8?

  I have already downloaded the site Web of Microsofts Windows 8.1,

  shooting these files:

  Autorun

  Setup

  And I put them as well as the backup, I created, added to the USB

  and has managed to startup, touchscreen, keyboard and mouse work, so I tried RE mode, or go

  Back to older tech preview 4, tried all options. but nothing works.

  Then I loaded the USB with the Windows 8.1 that I downloaded and this place starts.

  and it's getting ready to install, but the touch screen does not work,

  the keyboard does not work, the mouse does not work, so I can't click next to start

  installation.

  Same thing Windows 8.1 when I insert the USB with Windows Technical Preview.

  I can go into the BIOS with the lower Volume and the power button pressed together until the BIOS is displayed.

  It also runs Thouch.

  Any suggestions on what I can do?

  Zenpotter

  Hi kirankp25,

  Thanks for the reply.

  I solved it yesterday, I wrote the first time I had tried all the options,

  I thought, but my 15 year old nephew said that I did not

  the clean install, in which I did later, when the option of

  Remove the module from TPM - which is something about the possibility to encrypt your

  HD with bitclocker and so on, I removed it and everything worked.

  Not sure if it was possible without deleting it, in any case, now I still write on

  My W511 with keyboard.

  Looks like it works a lot better now, with Windows Technical Preview.

  It is probably Acer built the Windows 8 to work perfectly with this specific operating system.

  with installing custom drivers and so on. I guess you know what I mean!

  Thank you for this forum even exist.

  Zenpotter

• SonicWall NetExtender fails on WIndows 10 Technical Preview

  Hi all, I installed the Technical Preview of Windows 10 on my laptop and NetExtender hangs after entering my password (secondary authenticalion). Others have the same problems, as noted with the following messages on MS tech website:

  

  

  

  This error is present in the Event Viewer as NetExtender crashes:

  The failing application name: NEService64.exe, version: 7.0.203.1, time stamp: 0x5268c5f7
  The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
  Exception code: 0xc0000005
  Offset error: 0 x 0000000000000000
  ID of the process failed: 0 x 1884
  Start time of application vulnerabilities: 0x01cff13b1d54ac91
  The failing application path: C:\Program Files (x86)\SonicWALL\SSL-VPN\NetExtender\NEService64.exe
  Path of the failing module: unknown
  Report ID: 6e918927-5d2e-11e4-828a-10c37b1bb903
  Faulting full name of the package:
  ID of the failed package-parent application:

  It works without AnyConnect.

  But using windows build in VPN didn't work when I tried it with Windows graphic interface.

  But that´ll do the trick:

  Go to PowerShell and run the following commands:
  
  $xml = "4433".

  $sourceXml = New-Object System.Xml.XmlDocument

  $sourceXml.LoadXml ($xml)

  Add VpnConnection name FWSSLVPN ServerAddress - 10.61.252.250 - SplitTunneling $True - PluginApplicationID SonicWALL.MobileConnect_cw5n1h2txyewy - CustomConfiguration $sourceXml
  
  and replace the name (FWSSLVPN) and serveradress (10.61.252.250) this last comand (and perhaps in the first Port)

  Then connect the VPN and the connection. Windows 10 you have no field for the field. Just put it in front of the name of connection with a backslash: 'domain\user '.

  support.Software.Dell.com/.../sw10641

• Installation of Windows 10 Technical Preview

  I installed Windows 10 Tech Preview 64-bit iso.
  I installed it on my partitioned HDD which was installed my Windows 7 Ultimate. Windows 10 technology preview installation succeeded. After that, restarted my computer and on the trunk, it indicates the 0xc0000428 error code. The digital signature cannot be identified. Then I chose my Windows 7 then it started successfully but after that, I do not see black screen and it says, your windows 7 is not genuine. What do I do?
  I don't know if I can still get updates from Microsoft for the official 10 Windows upgrade, next July 29, 2015.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• Remove Windows 10 Technical Preview of HP 7 stream

  I bought my HP Jet 7 to try to the Technical Preview, but I wanted to also make sure that I could go home to 8.1 if necessary.  I created a recovery drive, attach it via a USB OTG cable, but if I leave power + volume down or in the menu settings Windows Update 10 and recovery, I encounter the same endless loop:

  1. choose your type of keyboard (I select 'US')

  2. choose an option (I have to select "use a device")

  3 use a device (I select "EFI USB Device")

  4 restarts, go to the logo HP and spinning in circles and brings back me to the screen "select your keyboard type.

  Any ideas what I am doing wrong?

  Looks like I did a restore USB recovery in December reading this thread:

  "I created the USB recovery, wiped the MEM set in own car and then restored the tablet in the USB factory setting so I can attest that it works well. To start the restore, press the power button and when you see the backlight, press the volume button low rocker and select the boot F9 option and select the USB stick to boot from. "The recovery partition is also restored so you can create another copy of the recovery media if you wish."

  Maybe you should try to wipe the entire disk clean up first?  You can start Windows 10 USB and go to Advanced Options and he has the option to remove all partitions.

• NetXtender on Windows 10 Technical Preview

  Hi all

  I just wanted to see if there is a version of the NetXtender client that works with the Technical Preview of Windows 10 builds?  I tried all the published versions, as well as leak and I can't get NetXtender clients to connect.

  Thank you

  Anthony

  Below KB articles could be useful.

  • SSL - SRA & UTM SMB (NetExtender Support) product lines

  

  • Windows Mobile Connect customer

  

• Issue of Dell place 8 Pro Wake-Up after upgrading Windows 10

  Hello!

  I upgraded to the latest BIOS A11 and installed all Windows 8.1 awaiting upgrades before version 10 of Windows. Yesterday, that I've upgraded to Windows 10.

  Most things run pretty well... but one annoying thing:

  When the device goes to sleep, I can't wake up around the high most of the time. Anyone can confirm this problem or has a work around?

  Kind regards, Andreas

  Thanks for posting. I saw that last night. Just before I was about to go back to 8.1, I decided to check the driver page once more and I saw there was new files for the chipset and a few other drivers. Works perfectly now.

  Thanks to Dell to get these online.

• Product code Windows Dell place 11 PRO (5130)

  I was wondering where the Windows product code is for my system. I would like that it creates a recovery image and keeps the product key in case I need it. I already tried the Keyfinder thing and it don't did me not a valid key. It came not in the package I see neither a sticker on the tablet...

  Thank you

  Mark

  mrosseisen

  I was wondering where the Windows product code is for my system. I would like that it creates a recovery image and keeps the product key in case I need it. I already tried the Keyfinder thing and it don't did me not a valid key. It came not in the package I see neither a sticker on the tablet...

  Thank you

  Mark

  Use the Microsoft VBscript to get it. Very easy to use and works (download, unzip and run).

  http://Gallery.technet.Microsoft.com/scriptcenter/backup-Windows-product-key-1a200645

• Reset Dell place full pro 11

  I read how to do a complete reset location of Dell pro 11 7130 must make recovery usb disk, then use it to reinstall. But when I do that there is no partition backing up I can see and the USB key will eventually be 256 MB and my system is 4-5 GB in size. I also noticed something on a warning that he will present to Windows 8 and I have installed 8.1 so I would need my installation disc, but I have no additional disks, that it is a tablet of second hand, so I'm not sure what came up with it in the first place? Our am that I ok to just go ahead with it? (I guess it will just install the USB not an img file too?) . Thank you

  I managed to attach the shelf to my phone and made the system detect and update drivers. I doubt the file corruption, but I guess that maybe... I looked at the log file and it said it couldn't detect the language of Windows and so he stopped from what I see. Very strange. Which could point to the bad programming if it was working properly I guess.